Seiban Wizard - Generating Tasks for existing Projects errors out

Hi All,
As I try to generate tasks using Seiban Wizard for an existing project, I am getting an error -"APP-PJM-58127: Task Creation returns the following error : Project ID is invalid"
Navigation:
1) Accessing Project Manufacturing Super User Responsibility -> Project Definition -> Seiban Wizard
2) Select (R) Using Project Number -> (R) Add an existing Project -> ( Select the existing project from LOV) -> ( Enter the Tasks sequence related data for generation)
I get the Error: "APP-PJM-58127: Task Creation returns the following error : Project ID is invalid".
Observations:
- The project being used is valid
- When trying to create new project and tasks using the Seiban Wizard, it is working fine,
Can you please provide any resolution for this.
Thank you
Regards
Naveen.

Break your code into two parts:
1. Extract the data from the database into variables in memory.
2. Generate the XML.

Similar Messages

Project Server 2010 - Unable to open project, no valid Project Detail Page could be found for the project error

I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!

Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS

How to create Document Structure for existing project in Solution Manager

Hi gurus
We have all the project document saved using Solution manager . we have ended with Phase1.
We are starting Phase2 and they are asking me to creat different folder as Phase to in existing project and store all the Documents
Can any one please tell me how to create New folder and store the documents in Existing project
Point will given for helpfull Answer
Thanks
Bhaskar

Hi Bhaskar,
Assuming you have full authorisations, the procedure is simple.
Please go SOLAR_PROJECT_ADMIN transaction.
From the menu please select Project -> Copy
In the ensuing screen, key in your desired project name, scroll through the other checkboxes to see if you are happy with the default choices; if not, take corrective actions.
In the last set of radi buttons "Desired behaviour at later version comparison", the default choice (2nd entry there - Adjust target project to the original of the source project) is fine.
From your scenario, since you do not have a Template -> Implementation Project functionality and instead are copying from one Implementation to the other, this radio button is of little consequence.
Execute the process.
In the window that comes up, please choose Local Object, assuming that you do not want to capture the whole contents into a 'Transport'. This is more required if you are aiming to copy the project from one SolMan instance to another.
It would give an information message "Generating in batch job (Name ......)
In a few minutes, you'd receive an intimation of the Project being copied.
That's pretty much about it. Have a check on the newly created project in SOLAR01.
Please let me know if you have any doubts.
Best regards,
Srini

Timesheet could not add task from existing project task assignment

HI there,
I tried to add a task in Timesheet (PWA2013) from an existing assignment. However, there is no task listed under the project when I open the dialog "Add an existing task". It only shows me the project name, I click it, nothing under the project.
Due to this issue, I could not add any existing task into the timesheet.Please look at the screenshot. The "test project" is the project name, while no any task under this project.
Any help is appreciated!
Cindy

Hi Cindy,
Indeed if you cannot access the server setting from the quick launch menu in the left part of PWA, you have to request administrator rights to your admin.
I would add an important comment : in PWA2013, the "close to update" PWA2010 feature no longer exists and has been replace by the "lock" feature, which works basically the same.
To unlock tasks in PWA2013,
go to server setting, manage views,
choose a project view,
insert the "lock" column,
go to the project center,
check out your project schedule,
select the view you just modified,
change the value in the lock field for the given task,
publish the project
Read this post here: http://social.technet.microsoft.com/Forums/projectserver/en-US/28d4914d-5a80-4638-8153-94155a7d43fe/locked-feature-not-working-in-pwa-2013?forum=projectserver2010general
And this article: http://epmsource.com/2012/10/31/where-has-close-tasks-to-update-gone-in-project-server-2013/
Then it should be ok.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Creating Task for Maintanance Project !!!!

Dear all.
When i open my maintainance project, i got to System landscape->Change request-> Create task-> i get the error "Project is not released, Project Cycle cannot be created "
How do i release the project..
Secondly ON clicking the Refresh TAB, I GET THE error "errors during synchronization of landscape".
ny idea???

Hi Suzzane,
What is the error log you are getting in slg1 after you clicked "refresh"?The error log will provide some help.
Thanks and regards,
Avinash

Budget Exceeded Issue - Activated budget profile for existing project

Dear Experts,
I have a Project and not using any budget profile, already actual data exist only in CJI3 no data in CJI5.
Now I assigned Budget Profile in that project.
While entering Budget in T-code CJ30, I can see values in assigned values for a wbs elements.
Example -
WBS Element - XXXXXX-02 - 2000 (Assigned) - Here Budget Profile not assigned in the project
Same WBS Element - Once Budget Profile assigned, when am assigning same 2000 budget am getting budget exceeded issue.
If I give 2500 I am not getting any errors, My tolerance as only Warning message.
Please Suggest - Screenshot attached
Thanks,

Hi Pavan,
As soon you enter your budgeting fig the availability control triggers, this check your assignment with available budget.this the reason you are getting error as you say there are already actual posting in CJI3.In this you need to balance first the fig which is appear in assigned column in CJ30.
Its a good practice to give budget first release it & then start procurement,confirmation etc.
Check this in budget profile availability control.
Regards,
Sachin.

NetBeans 6.1 Compile F9 Disable for existing project

Hello,
I recently try to use NetBeans, I try to import my web apps previously done on JCreator, however, the F9 compile is grey out.
Will you know what's going wrong?
Rgds, Dove

Hello,
Thank you both for your reply.
About the documentation, thank to give me the link. However, they explain how to use the former version of Netbeans IDE. I use last version, 6.1 and so there is some change. (no need to do anything, plugin included in ide, not the same visualisation, etc...)
Thank also Saiesh123 for your comment. This work great and the access time are quite similar to BPE.
I still got some bug that i've report to netbeans:
- When I open/download a repository object, i always have this error:
A java.lang.NullPointerException exception has occurred.
I can bypass it simply by closing the xml tab then editing it again one or two times.
The other problem i had with browsing seams to be resolved: When you click a XML object in project and open it in editor, the component are showed in the navigator window. However, this is sad you cannot browse referenced field in other library like we do on BPE. Also, you don't have the preconfigurated user friendly interface for editing forms.
Thanks for help.
Adrien

Running Enable-Mailbox for existing user error message

Hey guys,
I'm trying to enable an existing users mailbox from a powershell command running from my DC and im getting an error message
Enable-Mailbox is not recognized as a name of a cmdlet.
I have done import-modules activedirectory at the begining of the script to import a use rfrom a csv file and everything is working great except this final step.
am i missing something here ?
Thanks as always
Rich

Duplicate:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/653c0a19-ee93-4662-9084-8676c99f9024/running-the-exchange-management-shell-from-a-powershell-script-on-another-server?forum=winserverpowershell
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

When attempting to view the date track history for one employee, errors out

Hi All
When I attempt to view the date track history for one employee, it gives errors.
To get the details, the navigation is :
1. Search for employee xxxxxx
2. click on Assignment button
3. click on Date Track History.
4. Receive error APP-DT-52554.
5. Click OK on error message
6. click on Full History button.
7. Receive error APP-PAY-06153
What could be the problem and how to solve this?
Regards
Rahman

Sounds as if there is an inconsistency with the date tracked records. Can you check the records through TOAD or SQL Plus?
Have alook at MetaLInk article 343070.1 which refers to the second error message.
Regards
Tim

Crystal Report doesn't prompt for SAP credentials / errors out on refresh

2 Environments tested with same results:

BOE XI 3.1 SP2 & BOE XI 3.1 SP2 FP2.5 
SAP Intg Kit on mirrored SP/FP levels in each environment.

We've been successfully creating Crystal Reports against BEx queries in BW for months now as well as ECC master data. We've also built universes and have WebI reports actively working against similar BEx queries in the same. However, we're getting some curious behavior when we refresh the Crystal Reports against BEx queries in BW. Verified all necessary transports and authorizations have been provided for both authoring, as well as refreshing/viewing on demand, etc.

We've setup all the Crystal Reports we're testing to:

a) Use custom database logon information specified here. 
b) Specify a custom driver, leveraging the crdb_bwmdx driver 
c) Prompt the user for database login

We have not enabled SNC as of yet.

1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.

2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected

However:

3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:

Interactive Viewer: "Error in File %reportname%: Encapsulating Page Failed" 
Java Viewer: "Error in File %reportname%: Database Connection Error"

Nothing glaring in the event logs on the BO servers or in the Crystal logs that I can see, however just because it isn't spitting a specific error in the crystal logs doesn't mean I'm not missing something because I don't know what to look for behavior wise. To reduce the liklihood that it has to do with the way the report was built, we've tried against the same query by building a report using standard methods, as well as the SAP Toolbar using a very plain jane report. Same behavior.

Thoughts?
Edited by: Jay Riddle on Mar 1, 2010 8:55 PM

Hi,
1) When we refresh a WebI report hitting a BEx query with security applied, it doesn't prompt for the credentials, but we confirmed through tracing on the SAP side that if the user hits a paramater it has access to, the data comes through and when we hit a paramater they do not have access to, we can clearly see SAP reject it and it spits out a logical error on the BO side in InfoView and in the WebI logs on the BO server.
>> Which authentication are you using to logon to InfoView ? Whats the configuration in the Universe Connection for Authentication ?
2) When we refresh a Crystal Report hitting ECC data, we are prompted for the SAP credentials and everything works as expected
>> The user is using which authentication ? and against which system does he log on ?
However:
3) When we refresh a Crystal Report hitting a BEx query in BW, we are not promtped for SAP credentials. We immediately get the "LOV" prompts. Now, if we use a test user in SAP that has NO SECURITY restrictions at all and open access to the query, the data comes through. However, as soon as any security is applied to the query level, even if it is SAP ALL, we cannot retrieve the data. Tracing is also strange, as we can see on the SAP side it buffer the selected paramaters, but unlike with the WebI reports, it never shows it reaching the point where it checks each paramater against what the role has access to. An error is then spit back. We run the same queries with the same users within SAP and get normal behavior. It's as though as soon as we apply security to the query the mdx driver doesn't like it. Dependant on the type of InfoView viewer we use, the errors we consistently get on the BO side are:
>> The user is using which authentication ? and against which system does he log on ?
>> You mentioned security restrictions and I assume we talk about BI authorizations in form of data level security. If so - does the BW query include the authorization variables ?
Ingo

Projects error out when loading more then 1500 projects, while using api

Hello,
I am haivng problem while loading more then 1500 projects, when using api, PA_PROJECT_PUB.CREATE_PROJECT.
We are on 12.1.3.
It throws error message ORA-6502 pl/sql numberic error.
I have changed PA:Debug Mode to No at Resp level also
FND:Debug Mode to No
But still encountering same problem. Appreciate any help.
Regards,
Sanjay

I was using a custom Application, which had a id other then 275 (which belongs to Oracle projects)

Manual creation of Project Site for a project is taking old project site template.

Dear All,
I have modified the project site and save it as a template to associate it with an EPT so that the modification will reflect in new project sites.
For existing projects, I am deleting the old project sites (after taking backup) and recreating so that new modifications will be there for existing projects and I am able to do so.
But, for 1 of the project, when I have deleted the project site and recreated, still it is taking the old template (i.e. new modifications has not been seen).
Kindly advice in some areas so that I can jump in and around and can find out a solution so that the project site will take modified project template.
Example to get the issue in an easy way:
ProjectA:
Project Site: http://epm/pwa/ProjectA
Issue List:
Column: Category [data type as Choice: Cat1, Cat2, Cat3]
Have saved 1 project site as a template and associated with an EPT with the following changes:
Column: Category [data type as Choice: Choice1, Choice2, Choice3]
Then, deleted the project site: http://epm/pwa/ProjectA and recreated.
So, it should take the modifications in the project site.
But, it is showing as Column: Category [data type as Choice: Cat1, Cat2, Cat3].
Regards,
Shravan

Dear Guillaume,
Thanks for your response.
Please seem my comments inline:
Which Project Server version do you use?
PS 2010
It is working well and as expected for all projects except for 1 specific project?
Yes. It is working well for other projects except 1 project.
Has this project something particular?
Nope. It is similar as other projects.
How do you proceed to create the new project site? Do you go to the site actions, then new site and pick up your new template?
First I have modified 1 of the project site and saved that site as a template.
Then, I have deleted the existing project site (from Project Sites under Operational Policies) and recreated so that project site will gets created from the new template. But, it's not happening.
Regards,
Shravan

Assigning budget profile to already existing project

Hi All,
Please suggest how can we assign budget profile to already existing project .

Hi Vishal,
You can go the Project builder, open the particular project and in the detail screen of the project definition, enter the budget profile in the control data tab page.
Or goto SPRO->Project system->Costs->Budget->Stipulate default budget profile for Project definition and assing the bedget profile.
Or enter the Budget profile in the Controlling tab page of the Project profile.
You can do all these for existing projects.
regards
Pratap.V

Generate Alerts for Task changes in Project Schedule

Hi,
I would like to generate alerts to all the Project resources when a Task has been revised in Project Schedule. Does MS Project Server 2010 provides this functionality OOTB?
If this not available OOTB, I am planning to write an event handler to generate alerts for Task updates. Would an en event handler for Task level changes impact performance of server?.

Hello,
This is out of the box with the alerts and reminders in 2010, see:
http://technet.microsoft.com/en-gb/library/gg982969(v=office.14).aspx to enable the alerts
and:
http://technet.microsoft.com/en-gb/library/hh767487(v=office.14).aspx - to configure them
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Seiban Wizard - Generating Tasks for existing Projects errors out

Similar Messages

Maybe you are looking for