Select from SQL Server Activity
Hi,
I'm using the Select from SQL Server Activity in CPO to look up some values in a table, straightforward SQL queries like select * from Table work 100% but when I start applying a WHERE clause to the query it fails to return the results even though when running query in SQL studio it returns results successfully.
The issue seems to be when trying to use brackets in a OR statement:
The SQL Statement is:
SELECT AppName FROM METADaaS WHERE
NCCX NOT LIKE '%18421%'
AND RTYPE='A'
AND BUNDLEDWITH LIKE '%GOL Back Office%'
AND (NCC = '0' OR NCC LIKE '%18421%')
This returns no results in CPO but in SQL Studio returns the results as expected.
If I remove the "(NCC = '0' OR NCC LIKE '%18421%')" I get results in CPO.
thanks
Any SQL statement should work. I would suggest you open a TAC case.
Similar Messages
-
Unable To Select From SQL Server table with more than 42 columns
I have set up a link between a Microsoft SQL Server 2003 database and an Oracle 9i database using Heterogeneous Services (HSODBC). It's working well with most of the schema I'm selecting from except for 3 tables. I don't know why. The common denominator between all the tables is that they all have at least 42 columns each, two have 42 columns, one has 56, and the other one, 66. Two of the tables are empty, one has almost 100k records, one has has 170k records. So I don't think the size of the table matters.
Is there a limitation on the number of table columns you can select from through a dblink? Even the following statement errors out:
select 1
from "Table_With_42_Cols"@sqlserver_db
The error message I get is:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message [Generic Connectivity Using ODBC]
ORA-02063: preceding 2 lines from sqlserver_db
Any assistance would be greatly appreciated. Thanks!Not a very efficient and space friendly design to do name-value pairs like that.
Other methods to consider is splitting those 1500 parameters up into groupings of similar parameters, and then have a table per group.
Another option would be to use "vertical table partitioning" (as oppose to the more standard horizontal partitionining provided by the Oracle partition option) - this can be achieved (kind of) in Oracle using clusters.
Sooner or later this name-value design is going to bite you hard. It has 1500 rows where there should be only 1 row. It is not scalable.. and as you're discovering, it is unnatural to use. I would rather change that table and design sooner than later. -
How to select data from Sql server 2005 database tableinto oracle database table
Hi,
I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
Thanks a lot in advance.
rk
OS: Windows 7 professionalHi,
you can use export/import wizard and specify sql server as a source and oracle as destination.
I hope this is helpful.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog -
How to delete the Folder from sql server 2008
Hi all,
I was trying to delete the folder from sql server 2008 with the below script
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @cmd VARCHAR(8000)
DECLARE @folderName VARCHAR(256) -- filename for backup
SET @folderName = + (CONVERT(varchar(10), GETDATE()-7, 112)) -- 7 days back date folder name
SET @path = 'I:\Backup_Test\' + @folderName -- Folder path
SET @cmd = 'del ' + @path -- Delete
EXEC master..xp_cmdshell @cmd
--Print @cmd
This is not working it was asking the Confirmation (I:\Backup_Test\20100629\*, Are you sure (Y/N)? ) what will i do to the delete the folder.
Thanks,
Prasad R.I would notice you that T-SQL does not play well to do things like that. Do not you want using .net language to delete folders?
Old method is
declare @HR int, @CFOLDER varchar(255),@FSO int
set @CFOLDER='D:\folder\'
EXEC @HR = sp_OACreate 'Scripting.FileSystemObject', @FSO OUT
EXEC @HR = sp_OAMethod @FSO, null, 'DeleteFolder', @CFOLDER
Now regarding to your second question please examine xp_fileexist system stored procedure
CREATE FUNCTION dbo.fn_file_exists(@filename VARCHAR(300))
RETURNS INT
AS
BEGIN
DECLARE @file_exists AS INT
EXEC master..xp_fileexist @filename, @file_exists OUTPUT
RETURN @file_exists
END
GO
-- test
SELECT dbo.fn_file_exists('c:\a.txt')
Best Regards, Uri Dimant SQL Server MVP http://dimantdatabasesolutions.blogspot.com/ http://sqlblog.com/blogs/uri_dimant/ -
Error while exporting data from sql server to excel
Hi,
I am trying to export data from sql server to excel.
The query that I used is s follows
INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
select
column1,column2.... from Table1
I get the following error message while doing so..
String or binary data would be truncated.
The statement has been terminated.
One of the column's holds data more than 225 characters.
What is the way to correct this, i want the whole data of the colum in the excel sheet.I haven't had great luck with the INSERT INTO OPENROWSET method. Can you try one of the many samples from one of these 3 links?
http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Error while reversing data from SQL Server to ODI
hi,
I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022.
And now, I am getting the below error while reversing the data from SQL Server database.
0 : 08001 : java.sql.SQLException: No suitable driver
Looking for the assistance on the same.
Thanks,
AbhayIf everything is fine the reversing should be fine. I would say check again if the Technology of the Model and the also the dataserver is created under the right Technology in topology too.
also if this doesn't help , Please tell us the steps you have carried so far . Also can you try selective reverse is it showing the tables. -
Migrating a table with BLOB field from SQL-Server to Oracle.
Hi All,
I'm trying to create a Class to migrate data from SQL-Server to Oracle, this table has a BLOB field.
The Code:
package br.com.infox;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.Statement;
public class Migrador {
public static void main(String[] args){
try {
// Conex�o com o SQL Server
Class.forName("net.sourceforge.jtds.jdbc.Driver");
Connection conSQL = DriverManager.getConnection ("jdbc:jtds:sqlserver://10.10.2.9/protocolo","prot","suinf2002");
// Conex�o com o Oracle
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conORA = DriverManager.getConnection ("jdbc:oracle:thin:@10.10.2.2:1521:des","protocolo","protocolo");
Statement stSQL = conSQL.createStatement();
String querySQL = "SELECT * FROM DOC_INCORPORADO";
ResultSet rsSQL = stSQL.executeQuery(querySQL);
String queryORA = "INSERT INTO PROT_VITALICIAMENTO (NU_PROCESSO, ANO_PROCESSO, CD_USUARIO, DT_ENVIO," +
"DE_COMPLEMENTO, NM_ARQUIVO, ARQUIVO, NU_SEQ, CD_TIPO_ARQUIVO, MES, ANO) VALUES (?,?,?,?,?,?,?,?,?,?,?)";
PreparedStatement psORA = conORA.prepareStatement(queryORA);
while (rsSQL.next()){
System.out.println("Linha: " + rsSQL.getRow());
psORA.setInt(1, rsSQL.getInt("nu_processo"));
psORA.setInt(2, rsSQL.getInt("ano_processo"));
psORA.setInt(3, rsSQL.getInt("cd_usuario"));
psORA.setDate(4, rsSQL.getDate("dt_incorporacao"));
psORA.setString(5, rsSQL.getString("complemento"));
psORA.setString(6, rsSQL.getString("nm_arquivo"));
psORA.setBinaryStream(7, rsSQL.getBinaryStream("arquivo"), (int)rsSQL.getBlob("arquivo").length());
psORA.setInt(8, rsSQL.getInt("num_seq"));
psORA.setInt(9, rsSQL.getInt("cd_tipo_arquivo"));
psORA.setInt(10, rsSQL.getInt("mes"));
psORA.setInt(11, rsSQL.getInt("ano"));
psORA.executeUpdate();
stSQL.close();
psORA.close();
conORA.close();
conSQL.close();
} catch (Exception e){
e.printStackTrace();
The ERROR:
java.sql.SQLException: Exce��o de E/S: Connection reset
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:3668)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1119)
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2191)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2064)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2989)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:658)
at br.com.infox.Migrador.main(Migrador.java:41)
What's the problem of these Class?
Thank's.Depending on the version of the database you have, you could use transportable tablespaces.
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96524/c04space.htm#9370 -
Fetch the data from sql server table to array
In the following script i am fetching the servers details from text file. Please anyone help me to get the same information from sql server database table. with using this query
"SELECT DISTINCT [server_name]
FROM
Servers] where
Status='1'"
$ServerName =Get-Content "c:\servers\servers.txt"
foreach ($Server in $ServerName) {
if (test-Connection -ComputerName $Server -Count 4 -Delay 2 -Quiet ) {
write-output "$Server is alive and Pinging `n"
} else {
Write-output "TXUE $Server seems dead not pinging"i have tested it is not working..
=@"
SELECT DISTINCT [server_name] FROM Servers] where Status='1'
$connection
=new-objectsystem.data.sqlclient.sqlconnection(
"Data Source=xxx;Initial Catalog=xxx;Integrated Security=SSPI;”)
$adapter
=new-objectsystem.data.sqlclient.sqldataadapter($query,
$connection)
$table
=new-objectsystem.data.datatable
$adapter
.Fill($table)
| out-null
$compArray
=@($table)
##### Script Starts Here ######
foreach($Serverin$ServerName)
if(test-Connection-ComputerName$Server-Count4
-Delay2
-Quiet)
write-output"$Server
is alive and Pinging `n"
else{
$query -
Bulk Insert from SQL Server to Oracle
I have to load around 20 million rows from SQL Server table to Oracle table using Network Link,wrote following code using Bulk Collect,which is working but taking more time(taking 5 hrs).
I also tried with changing table to parallel degree 8 didn't help(Also Oracle Table set to NOLOGGONG mode).
Is there any better way to do this ? Appreciate any help in this regard .
Script :
CREATE OR REPLACE PROCEDURE INSERT_SQLSERVER_TO_ORACLE
IS
TYPE v_ARRAY IS TABLE OF TARGET_CUST%ROWTYPE INDEX BY BINARY_INTEGER;
ins_rows v_ARRAY;
BEGIN
DECLARE CURSOR REC1 IS
SELECT COL1, COL2,COL3,COL4 SOURCE_SQLSERVER_CUST;
BEGIN
OPEN REC1;
LOOP
FETCH REC1 BULK COLLECT INTO ins_rows LIMIT 5000;
FORALL i IN ins_rows.FIRST..ins_rows.LAST
INSERT INTO TARGET_CUST VALUES ins_rows(i);
EXIT WHEN REC1%NOTFOUND;
END LOOP;
COMMIT;
CLOSE REC1;
END;
END;
Thanks in Advance.887204 wrote:
I have to load around 20 million rows from SQL Server table to Oracle table using Network Link,wrote following code using Bulk Collect,which is working but taking more time(taking 5 hrs).I would not pull that data via a network link and use standard SQL insert statements. Bulk processing is meaningless in this context. It does nothing to increase the performance - as context switching is not the issue.
The biggest factor is pulling 20 million rows's data via database link across the network. This will be slow by it's very nature.
I would use bcp (Bulk Copy export) on SQL-Server to write the data to a CSV file.
Zip that file. FTP/scp/sftp it to the Oracle server. Unzip it.
Then do a parallel direct load of the data using SQL*Loader.
This will be a lot faster than pulling uncompressed data across the network, a couple of rows at a time (together with the numerous moving parts on the Oracle side that uses a HS agent as interface between SQL-Server and the Oracle database). -
Desc doesn't show datetime columns from SQl Server
Hi Everyone,
I have working db link to sql server using hsodbc:
Oracle 10.2 on AIX using freetds odbc driver version 0.82.
I can access tables on sql server but oracle sees only varchars and numerics columns in a table.
Is there a way to select datetime columns from sql server using hsodbc?when hsodbc does not show a certain data type it is commonly related to the fact that HSODBC doesn't support the related ODBC data type.
In general you have a data type in your SQL Server which is mapped to an ODBC data type by the ODBC driver. HSODBC then maps the ODBC data type to an Oracle equivalent and when the ODBC data type isn't supported by HSODBC it just drops it from the select list.
So for a root cause analysis an ODBC trace is required to determine the mapping of the FreeTDS ODBC driver.
With this info we can then compare the mapping documented in the HSODBC manual and if the ODBC data type isn't listed as a supported data type you then need to cast the data type on the source side to a different data type (for example varchar/char).
So please post the ODBC trace and I'll have a look.
- Klaus
Edited by: kgronau on Apr 2, 2013 12:50 PM
BTW, here the link to the HSODBC docu:
http://docs.oracle.com/cd/B19306_01/server.102/b14232.pdf
Oracle® Database
Heterogeneous Connectivity Administrator's Guide
10g Release 2 (10.2)
B14232-01
B.1 Mapping ANSI Data Types to Oracle Data Types Through an ODBC
Interface -
Problem in Import of Tables from SQL Server.
Hi Forum,
I m new to OWB.
I m facing a prob regarding the import of tables.
I m importing tables from SQL server through ODBC DB Link..
It imports the tables fine, but without key constraints..
Can u tell me, Why? and How can I import that info as well?Hi David,
The things I said are not a fix for this problem.
If your RCU installation worked, then you do not have to worry about modifying the createfr.sql.
Edit:
I've just tracked the problem. It appears that when using the query builder, BI forgets to add the " sign.
For example:
This query will give the hyperion error.
select "table"."field"
from "database.user"."table"
To correct it write it like this:
select "table"."field"
from "database"."user"."table"
Edited by: EBA on Nov 14, 2011 10:21 AM -
Reading milliseconds from Sql server into oracle 10g
Hi,
We have a very time sensitive pressing requirements to be addressed immediately.
We need to read the date time column from sql server 2008 into oracle 10g.
We have a dblink established between the two servers and have tried to use sql server and sql native client 10 driver to read the dates from sql into oracle.This we are able to do very successfully.
The issue is in reading milliseconds stored in sql server.The millisecond part comes in as 00000 from sqlserver to oracle.These milliseconds are needed to identlfy the unique records.
For instance
SQL SERVER Oracle
source_id source id
01/01/2012 6:30:35:456 01/01/2012 6:30:35:000000.
Im issuing my query through Toad via Oracle to remote sql server using a dblink which connects using HS ODBC connection to sql server 2008(remote).
We have no control over sql server Db as this is remote third party DB.We just have select access to their tables to bring into our own oracle DB.
Any insight or help will be much appreciated.Hi,
Could you please send the following information -
- what version of HSODBC are you using ? Is it a 10.2 version ?
- what is the SQL*Server datatype of the column you are reading ?
- from Oracle could you issue -
describe sql_server_table@hsodbc
- what is the Oracle datatype shown for the column ?
Could you also run your tests using SQLPLUS instead of TOAD ? We don't support TOAD and need to know if the problem also happens when using SQLPLUS, to avoid it being a TOAD problem.
Also, 10.2 HSODBC is now desupported and you should be using the 11g Database Gateway for ODBC (DG4ODBC) which is a direct replacement for HSODBC. To use DG4ODBC your RDBMS needs to be at 10.2.0.4 or higher and DG4ODBC should be installed in a completely separate ORACLE_HOME from the existing 10.2 install.
Regards,
Mike -
How to extract incremental data from SQL server to oracle tables in ODI
HI All,
In my ODI sql server is install.My Source is in SQL server and my target is in Oracle.
I need to create a interface mapping where i need to extract incremental data from sql server to oracle.
There is a datetime(with Timestamp) field in sql server .I need to pull incremental data based on dateime.
Example = tablename.DateTime > (select '1-jan-11' from dual) .....i am using this query but its not woking.the error is Invalid object name"dual".
We are not going to use Incremental in IKM and LKM.
Request you to please provide any suggestion ASAP.
Thanks,
LonyYou can do that via Variable.
In the interface mapping create a filter on Tablename.DateTime
and put the condition like this
Tablename.DateTime BETWEEN #VAR and in the variable use this query in refreshing tab with oracle schema
SELECT max(start_time)||' AND '||max(END_TIME)+1 from audit_table where ETL_JOB_CODE = '20'In the package call the above variable in refresh mode and then interface.
This way you will pass from the query between and condition date and pass to interface so that SQL Server fetches the data between those too range.
Note:- You might need to tweak the date format so that SQL Server can understand.
Hope this helps. -
Migration of table from sql server to oracle
Hi,
I had to export few tables from SQL Server to Oracle. After the migration, I am checking to see all the tables in Oracle that have been migrated from Sql Server. I am executing select * from tab; and am seeing all the the tables (including those have been exported) from the output list of tables. However, when I am doing a select * from x; where x is one of the few tables that have been migrated, it says table or view does not exist. This is the problem with all other migrated tables. Any help is appreciated in advance. Thanks.
[email protected]Try select * from "x"
-
Reading BLOB from SQL Server 2005 using DB Link from Oracle 10g
Hi All,
I am trying to read a table's data from SQL Server 2005 using ODBC DB Link created in Oracle 10g (10.2.0.3/4) database. I am not using oracle gateway.
I am able read all data except for the BLOB data from SQL server 2005. It gives error given below when I try to execute query SELECT * from T_TRANSACTION_DATA@sdeslink inside a stored procedure:
ORA-22992: cannot use LOB locators selected from remote tables
Kindly help how to read BLOB from SQL server 2005 inside Oracle 10g.
Best Regards!
IrfanIrfan,
If you can read the blob data using 10.2 HSODBC then there should be no problem using the 11g gateway.
I recommend you download the latest version which is 11.2.0.3 available from My oracle Support as -
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
This is a full version and does not need a previous version to have bene installed. When installing it needs to be in a completlely separate ORACLE_HOME from the existing 11.2 install.
For the Ora-22992 problem have a look at this note in My Oracle Support -
Ora-22992 has a workaround in 10gR2 (Doc ID 436707.1)
Regards,
Mike
Maybe you are looking for
-
Career ladder in Netweaver EnterPrise Portal
Hi , Can any one advise me on whats the carreer ladder in SAP Netweaver Enterprise Portal ? i started working as ABAP developer and now get trained in Enterprise Portal , So i wanted to ask weather to go for portal ahead or continue with ABAP..
-
How can I get this to work with NAT?
Hi Masters, I need to add a route-map to a static NAT but the option seems to be available only if using inside/outside NAT, not if using enable NAT. This is a CISCO1921/K9 running 15.2(4)M6 Here's what I mean: R2(config)#ip nat inside source stat
-
Ipod Touch (2gen) 4.2.1 can''t find wifi.
Before I updated my Ipod to 4.2.1. I always could connect with my wifi at home. After I updated it, the Ipod couldn't find it anymore could anyone help me? or does anyone have the same problem?
-
Hi all, i have created one enhancement in 2lis_11_vahdr.. first i do it.. rsa5... transfer data sources.... thne i go to .. rsa6... select 2lis_11_vahdr... then clicked to enahance structure.. but showing error datasource 2lis_11_vahdr does not allow
-
Personal Hotspot stops working periodically
I am using the 3rd Generation Verizon iPad and my area has LTE coverage. Status Indicators 4 Bars of Verizon LTE Coverage 1 Connection to iPad for Personal Hotspot Steps to Reproduce: 1. Turn on Personal Hotspot 2. Use a MacBook Pro (or WiFi enabled