Select three tables data with Same where condition

Hi i want sum data in three tables with same where condition. how can i do this code very simple.
SELECT SUM(SIGNA) FROM dbo.tblPLAG
WHERE VERSION='ACTUAL' AND STATS='ST_Z010'
AND FACILITY='FA_2003'
AND TD IN ( SELECT TIMEID FROM Time WHERE ID BETWEEN
@YEAR+'.'+(SELECT RIGHT ('000'+ CAST (@PERIOD-6 AS varchar), 3))
AND
@YEAR +'.'+(SELECT RIGHT ('000'+ CAST (@PERIOD AS varchar), 3)))

Try following
SELECT SUM(t1.SIGNA) + sum(t2.SIGNA) + sum(t3.SIGNA) and you query, it will add the SUMs of each table.. hopefully it will work

Similar Messages

Dynamic select query with dynamic where condition

Hi all,
I want to use the dynamic select query with dynamic where condition. For that I used the below code but I am getting dump when using this code.
Please advice, if there is any other way to achieve this requirement.
Thanks,
Sanket Sethi
Code***************
PARAMETERS: p_tabnam      TYPE tabname,
            p_selfl1      TYPE edpline,
            p_value       TYPE edpline,
            p_where1      TYPE edpline .
DATA: lt_where    TYPE TABLE OF edpline,
      lt_sel_list TYPE TABLE OF edpline,
      l_wa_name   TYPE string,
      ls_where    TYPE edpline,
      l_having    TYPE string,
      dref        TYPE REF TO data,
      itab_type   TYPE REF TO cl_abap_tabledescr,
      struct_type TYPE REF TO cl_abap_structdescr,
      elem_type   TYPE REF TO cl_abap_elemdescr,
      comp_tab    TYPE cl_abap_structdescr=>component_table,
      comp_fld    TYPE cl_abap_structdescr=>component.
TYPES: f_count TYPE i.
FIELD-SYMBOLS : <lt_outtab> TYPE ANY TABLE,
*                <ls_outtab> TYPE ANY,
                <l_fld> TYPE ANY.
struct_type ?= cl_abap_typedescr=>describe_by_name( p_tabnam ).
elem_type   ?= cl_abap_elemdescr=>describe_by_name( 'F_COUNT' ).
comp_tab = struct_type->get_components( ).
comp_fld-name = 'F_COUNT'.
comp_fld-type = elem_type.
APPEND comp_fld TO comp_tab.
struct_type = cl_abap_structdescr=>create( comp_tab ).
itab_type   = cl_abap_tabledescr=>create( struct_type ).
l_wa_name = 'l_WA'.
CREATE DATA dref TYPE HANDLE itab_type.
ASSIGN dref->* TO <lt_outtab>.
*CREATE DATA dref TYPE HANDLE struct_type.
*ASSIGN dref->* TO <ls_outtab>.
* Creation of the selection fields
APPEND p_selfl1 TO lt_sel_list.
APPEND 'COUNT(*) AS F_COUNT' TO lt_sel_list.
** Creation of the "where" clause
*CONCATENATE p_selfl1 '= '' p_value ''.'
*            INTO ls_where
*            SEPARATED BY space.
*APPEND ls_where TO lt_where.
* Creation of the "where" clause
APPEND p_where1 TO lt_where.
* Creation of the "having" clause
l_having = 'count(*) >= 1'.
* THE dynamic select
SELECT          (lt_sel_list)
       FROM     (p_tabnam)
       INTO CORRESPONDING FIELDS OF TABLE <lt_outtab>.
*       WHERE    (lt_where).

Hi Sanket,
The above given logic of mine works for you, put the code in the If condition and try-
just like below:
IF NOT P_EBELN IS INITIAL.
lt_where = '& = ''&'' '.
REPLACE '&' WITH p_ebeln INTO lt_where.
REPLACE '&' WITH field_value INTO lt_where.
SELECT (lt_sel_list) INTO CORRESPONDING FIELDS OF TABLE <lt_outtab>
FROM (p_tabnam)
WHERE (lt_where).
ENDIF.
thanks\
Mahesh

Select duplicate Data with same No.

Dear All experts,
    How we giong to select the data with same No as 1 record count.
example :    Bellow is the sample table contains 5 rows records, but of records ard same number.
      post No.               Name
      1001                      Jacky
      1001                      Jimmy
      1002                      Mark
      1003                     Jin
      1004                     chloe
when i use the select statement bellow :
Select * from table into corresposding of table t_table up to 3.
will get the result like below .
      1001                      Jacky
      1001                      Jimmy
      1002                      Mark
Question is , how i going to write the statement to get the 3(depend on user insert how many record) different no. example , 2records of 1001, 1002 , and 1003 .

if its a ztable then better to keep a counter field for your requirement.
else.
parameter : count type i. "this holds number of required data.
select * from TT_XYZ into table gt_itab.
loop at gt_itab into gs_itab.
at end of post_no.
   count = count - 1.
endat.
if count = 0.
exit.
endif.
append gs_itab to gt_itab2.
clear gs_itab.
endloop.
now gt_itab2 holds required entries for you.

We have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.

we have three discussions forums with same subject. whenever a post gets new reply in one forum, it should automatically trigger workflow functionality to check conditions and send the same reply to other synchronized forums.
Rajiv Kumar

Hi,
More details about your discussions forum will make others easier to find a corresponding solution on your requirement.
If you mean there are three Discussion Board list waiting for synchronizing, I would suggest you create an Event Receiver for the three Discussion Board list.
Here is a link with code demo about how to copy items from one Discussion Board to another including Replies:
http://spcodes.blogspot.com/2013/03/programmatically-copy-items-from-one.html
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

How to export table data with coloring of cell according to value.

Hi all,
I am using jdeveloper 11.1.1.6
i want to export table data with lot of formatting. like with coloring of cell according to value and so many.How to do that?

Hi,
like with coloring of cell according to value and so many.How to do that?
Answer is, you can't
Frank

Field symbols as Table name and in where condition in a select statement

Hello All,
I have a scenario where I need to get user input on table name and old field value and new field value. Then based on user input, I need to select the record from the database. The column name for all the tables in question is different in the database, however there data type is the same and have same values.
I am not able to use a field symbol for comparing the old field value to fetch the relevant record in my where clause.
I cannnot loop through the entire table as it has 10 millilon records, please advice on how to add the where clause as field symbol as the table name is also dynamically assigned.
Here is my code:
DATA: TAB       LIKE SY-TNAME,
      TAB_COMP1 LIKE X031L-FIELDNAME,
      TAB_COMP2 LIKE X031L-FIELDNAME,
      NO_OF_FLD TYPE N.
DATA: BEGIN OF BUFFER,
        ALIGNMENT TYPE F,
        C(8000)   TYPE C,
      END OF BUFFER.
FIELD-SYMBOLS: <WA>   TYPE ANY,
              <COMP1> TYPE ANY,
              <COMP2> TYPE ANY.
GET TABLE NAME GIVEN BY USER IN LOCAL VARIABLE
TAB = TAB_NAME.
CREATE FIELD NAME BASED ON THE TABLE NAME ENTERED.
CASE TAB_NAME.
WHEN 'OIUH_RV_GL'.
      KEY FIELD
        TAB_COMP1 = 'GL_GL_SYS_NO'.
        NO_OF_FLD = 1.
WHEN 'OIUH_RV_OPSL'.
      KEY FIELD
        TAB_COMP1 = 'OPSL_GL_SYS_NO'.
        NO_OF_FLD = 1.
WHEN 'OIUH_RV_OTAX'.
      NOT THE ONLY KEY FIELD
        TAB_COMP1 = 'OTAX_GL_SYS_NO'.
        TAB_COMP2 = 'OTAX_TAX_POS_NO'.
        NO_OF_FLD = 2.
WHEN 'OIUH_RV_GTAX'.
      NOT THE ONLY KEY FIELD
        TAB_COMP1 = 'GTAX_GL_SYS_NO'.
        TAB_COMP2 = 'GTAX_TAX_POS_NO'.
        NO_OF_FLD = 2.
WHEN OTHERS.
        EXIT.
ENDCASE.
SET FIELD SYMBOL WITH APPROPRIATE TYPE TO BUFFER AREA.
ASSIGN BUFFER TO <WA> CASTING TYPE (TAB).
How to add where clause and remove the if condition in the select -- endselect
SELECT * FROM (TAB) INTO <WA>.
ASSIGN COMPONENT TAB_COMP1 OF STRUCTURE <WA> TO <COMP1>.
IF NO_OF_FLD = 2.
    ASSIGN COMPONENT TAB_COMP2 OF STRUCTURE <WA> TO <COMP2>.
ENDIF.
IF <COMP1> = OLD_SYS_NO.
    code for updating table would come here
      WRITE: 'MATCH FOUND'.
      EXIT.
ENDIF.
ENDSELECT.
Please advice. Thanks much.
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:33 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:34 PM
Edited by: Shipra Jhunjhunwala on Jul 22, 2009 1:35 PM

1. Create single column table for holding field name depending on the table entered.
2. Take input from user: for e.g. table_name
3. Using case load single column table with required fields
   for e.g.
CASE TAB_NAME.
   WHEN 'OIUH_RV_GL'.
         Append 'GL_GL_SYS_NO' to KEY_FIELD --> KEY_FIELD is the single line internal table as mentioned in step 1.
   WHEN 'OIUH_RV_OPSL'.
         Append 'OPSL_GL_SYS_NO'.
   WHEN 'OIUH_RV_OTAX'.
         Append 'OTAX_GL_SYS_NO' to KEY_FIELD.
           APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
   WHEN 'OIUH_RV_GTAX'.
         Append 'GTAX_GL_SYS_NO' to KEY_FIELD.
           APPEND 'OTAX_TAX_POS_NO' to KEY_FIELD.
   WHEN OTHERS.
      EXIT.
   ENDCASE.
   Now depending on the table name you have required column ready
4. Create dynamic internal table using following sudo code
   Fill the fieldcatlog using the single column field table and DD03L table, See what all columns from DD03L you want to fill in field catlog table
   loop at internal table with all the fields.
    move it to field catalog.
    append field catalog.
   endloop.
5. Pass this field catalog table to static method create_dynamic_table method
   DATA table TYPE REF TO DATA. --> data object for holding handle to dynamic internal table.
   call method cl_alv_table_create=>create_dynamic_table
   exporting
      it_fieldcatalog = fieldcatalog_tab
   importing
      ep_table = table.
6. Now assign table reference to field symbol of type table.
   ASSIGN table->* to <field-tab>.
7. Also create work area <field-wa> using refrence of table.
   create data object wa LIKE LINE OF <field-tab>.
   ASSIGN wa->* to <field-wa>.
8. Also define field symbol for field name.
   for e.g. <field_name>
4. Dynamic internal table is ready
5. Now execute the select statement as follows:
   SELECT (KEY_FIELD)
     INTO <ITAB> --> created dynamically above
      FROM (TABLE_NAME)
     WHERE (WHERE). --> WHERE is single line internal table having line type of CHAR72. So for every old value there will be one line
     Where condition is same as like we give in static way only difference in this case it will stored in internal table line wise.
    In this case you need to append all your where condition line by line in to WHERE.
5. To fill this dynamic internal table using ASSIGN COMPONENT <Comp_number> OF STRUCTURE <field-wa> TO <field-name>
   So in this case if first field of structure STRUCT1 is user_id then sudo-code will be
   loop at internal table containing list of fields into field_wa --> single column field table
       ASSIGN COMPONENT field_wa OF STRUCTURE <field-wa> TO <field>. "Here field_wa is wa area for single column internal table holding all the fieldnames.
       Now <field-name> points to user_id field. Move some value into it as nornally we do with variables.
       Move <your_new_value> to <field-name>. --> Assign new value
        or
        <field-name> = <your_new_value>.
   Endloop.
6. After completing all the fields one row will be ready in <field_wa>.
   APPEND <field_wa> to <field_tab>.
Hope this helps you.
Thanks,
Augustin.

How to write the select query with complex where condition

Hi all,
Can u help me in writing following select query.
select * from zu1cd_corr where time_stamp between firstday and lastday .
In the above query time_stamp contains the date and time.
where as firstday and lastday contains the dates.
I need to compare the date in the time_stamp with the firstday and lastday.
But time_stamp contains the time also and it is char of 14 characters length.

Hi,
If that is the case u can do as advait specified....
if the firstday and secondday are select-options then declare two more variables having 14 character length and then concatenate '000000' to firstday variable and '240000' to last day variable and then write ur query.
CLEAR : lv_firstday,
lv_lastday.
concatenate firstday '000000' to lv_firstday.
concatenate lastday '240000' to lv_lastday.
ranges : r_Date for zu1cd_corr-time_stamp.
r_date-sign = 'I'.
r_date-option = 'BT'.
r_Date-low = lv_firstday.
r_Date-high = lv_lastday.
append r_date.
select * from zu1cd_corr into table it_zu1cd_corr where time_stamp in r_Date.
I hope it helps.
Regards,
Nagaraj

Select fom table for all entries where field starts with value

Hello
I want to write a select like this
select * from bsis
into lt_bsis
for all entries in lt_itab
where xblnr like lt_itab-belnr%
I want to select all the entries from bsis where the field xblnr starts with the values found in lt_itab-belnr.
for example
ls_itab-belnr = 5100000028
bsis-xblnr = 510000002810001
                    510000002810002
                    510000002810003
                    520000002810001
and i want to select only the entries that start with 5100000028 in this case
Can anybody help?
Thanks

Hi,
I hope below example code will help you to fix your issue,
REPORT ytest.
TYPES : BEGIN OF ty_typ1,
          val TYPE i,
        END OF ty_typ1.
TYPES : BEGIN OF ty_typ2,
          val1 TYPE hrobjid,
          val2 TYPE hrobjid,
        END OF ty_typ2.
DATA : int_typ1 TYPE TABLE OF ty_typ1,
       int_typ2 TYPE TABLE OF ty_typ2,
       wa_typ1 TYPE ty_typ1,
       wa_typ2 TYPE ty_typ2,
       int_1001 TYPE TABLE OF hrp1001,
       wa_1001 TYPE hrp1001.
REFRESH : int_typ1, int_typ2, int_1001.
CLEAR : wa_typ1, wa_typ2, wa_1001.
wa_typ1-val = 500001.
APPEND wa_typ1 TO int_typ1.
wa_typ1-val = 500002.
APPEND wa_typ1 TO int_typ1.
wa_typ1-val = 500003.
APPEND wa_typ1 TO int_typ1.
wa_typ1-val = 500001.
APPEND wa_typ1 TO int_typ1.
SORT int_typ1 ASCENDING BY val.
DELETE ADJACENT DUPLICATES FROM int_typ1 COMPARING val.
LOOP AT int_typ1 INTO wa_typ1.
wa_typ2-val1 = ( wa_typ1-val * 100 ) + 1.
wa_typ2-val2 = wa_typ2-val1 + 98.
APPEND wa_typ2 TO int_typ2.
CLEAR : wa_typ1, wa_typ2.
ENDLOOP.
SELECT * FROM hrp1001 INTO TABLE int_1001
         FOR ALL ENTRIES IN int_typ2 WHERE
             plvar EQ '01'          AND
             otype EQ 'S'           AND
             sclas EQ 'O'           AND
             begda LE sy-datum      AND
             endda GE sy-datum      AND
             objid GE int_typ2-val1 AND
             objid LE int_typ2-val2.
LOOP AT int_1001 INTO wa_1001.
WRITE : / wa_1001-objid.
ENDLOOP.
Thanks & Regards,
Harish Kumar N

How can use the select statement to retriev the data from a where conditi

Hi,
SELECT KUNNR
           NAME1
           STRAS
           ORT01
           PSTLZ
           LAND1
     FROM KNA1
     INTO TABLE IT_KNA1
     FOR ALL ENTRIES IN IT_LIKP
     WHERE KUNNR = IT_LIKP-KUNNR AND
           KUNNR = IT_LIKP-KUNAG.
Here I am getting records only when WHERE KUNNR = IT_LIKP-KUNNR AND
                                        KUNNR = IT_LIKP-KUNAG.
But I need the records for both when KUNNR = IT_LIKP-KUNNR
                             And     KUNNR = IT_LIKP-KUNAG.
Can you suggest me the best logic.
Thanks.
Kumar .

Hi Suresh,
Use the following code.
Loop at it_likp.
if it_likp-kunnr <> ' '.
select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
         from kna1
         where kunnr = IT_LIKP-KUNNR.
elseif it_likp-kunag <> ' '.
select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
         from kna1
         where kunnr = IT_LIKP-KUNAG.
elseif it_likp-kunnr <> ' ' and it_likp-kunag <> ' '.
select name1 stras ort01 pstlz land1 into corresponing field of table it_kna1
         from kna1
         where kunnr = IT_LIKP-KUNNR
         AND   KUNAR = IT_LIKP-KUNAG.
endif.
endloop.
hOPE THIS WILL WORK FINE.
Rewards pts if it is usefull.
Regards
Srimanta

Select query with optional where condition

Hi,
Can Anybody help me out in the following problem?
I have the following query in a procedure.
SELECT replace(shipper_name,'\',' ') as shipper,
sum(teus / cntSailings) as teus
FROM VW_CONTRIBUTION,
VW_TOTAL_SAILINGS
WHERE VW_CONTRIBUTION.dir = VW_TOTAL_SAILINGS.DIR
AND VW_CONTRIBUTION.line = VW_TOTAL_SAILINGS.LINE
AND VW_CONTRIBUTION.accounting_month = VW_TOTAL_SAILINGS.ACCOUNTING_MONTH
AND VW_CONTRIBUTION.accounting_year = VW_TOTAL_SAILINGS.ACCOUNTING_YEAR
AND VW_CONTRIBUTION.Principal = arg_principal
AND VW_CONTRIBUTION.Dir = arg_direction
AND VW_CONTRIBUTION.line in ( arg_service )
AND VW_CONTRIBUTION.POL_country = arg_pol
AND VW_CONTRIBUTION.POd_country = arg_pod
AND VW_CONTRIBUTION.salesOffice = arg_SalesOffice
AND VW_CONTRIBUTION.salesregion = arg_SalesRegion
AND VW_CONTRIBUTION.cargo_type = arg_txtCargoType
AND VW_CONTRIBUTION.eqgroup = arg_ContType
AND VW_CONTRIBUTION.eq_size = arg_txtSize
AND VW_CONTRIBUTION.acct_date between arg_from_date and arg_end_date
GROUP BY shipper_name
ORDER BY teus desc;
Here some of the arguments are optional(Eg : VW_CONTRIBUTION.salesOffice, AND VW_CONTRIBUTION.eqgroup etc. ) and the values can be null. When they are null, I want them to be excluded from the where condition. Can anybody suggest me a solution for this?
Thanks,
Shalet.

I guess i misunderstood your original question.
The clause
AND (VW_CONTRIBUTION.salesOffice = arg_SalesOffice OR VW_CONTRIBUTION.salesOffice IS NOT NULL)
will cause the where clause to evaluate to FALSE anytime salesOffice IS NULL so the record will be excluded.
I thought you were asking how to not compare the value if the field contained a NULL.
Glad you found what you wanted.

Single SQl Query with different where conditions

Experts,
I have a requirement to design a report. Here are the details
I have Report table layout
Profit center Gross sales (This Year) Gross Sales (Last Year) % change Year of Year
The Report has a selection of entering the Start Date.
I have a single table in oracle which has profit center and Gross Sales Values on daily basis.
I want to write a single sql query to calculate both Gross Sales current year and Gross Sales Last Year. I can calculate Gross Sales Current Year by putting the where condition for start date = Current Year Date which i pass through report. I want to calculate the Gross Sales Last Year in the Same query by putting the different where condition i.e start date = Last Year date based on the date input.
I dont know how to put two where conditions in single query for two different columns.
Any help will be appreciated.
Thanks in advance
Regards
Santosh

instead of changing your where clause couldn't you just determine the yearly totals from your table and then use the lag statement to get last years total?
something like this?
I just made up 10,000 days worth of sales and called it fake table it is supposed to represent a variant of the table you were describing as your base table.
with fake_table as
( select trunc(sysdate + level) the_day,
level daily_gross_sales
from dual
connect by level < 10001
select yr, year_gross_sale, lag(year_gross_sale) over (order by yr) prev_year_gross_sale,
(year_gross_sale - lag(year_gross_sale) over (order by yr))/year_gross_sale * 100 percent_change
from
(select distinct yr, year_gross_sale from
select the_day,
daily_gross_sales,
extract(year from the_day) yr,
extract(year from add_months(the_day,12)) next_yr,
sum(daily_gross_sales) over (partition by extract(year from the_day)) year_gross_sale
from fake_table
order by yr
)

How To Create Table View With Same Column name But Different Table?

Hi All,
I have the problem to create a tableview with same column name but in different table.
The Table that i have:-
Table - PAC051MPROFORMA
Column - mrn,visitid
Table - PAC051TPROFORMA
Column - mrn,visitid
Table - PAC052MTRANSBILL
Column - mrn,visitid
Then i want to create a table view to view that table. This is my SQL
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
That SQL Return this error = ORA-00957: duplicate column name
Then I modify that SQL to
CREATE VIEW pacviewproforma (mrn,visitid)
As Select PAC051MPROFORMA.mrn,PAC051MPROFORMA.visitid,PAC051TPROFORMA.mrn,PAC051TPROFORMA.visitid,PAC052MTRANSBILL.mrn,PAC052MTRANSBILL.visitid
where
*(a.PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)*
and
*(a.PAC051TPROFORMA.mrn=PAC052TRANSBILL.mrn)*
This time this error return = ORA-01730: invalid number of column names specified
What should i do?
Thanks...

Hi,
SQL> CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
CREATE VIEW pacviewproforma (mrn,visitid,mrn,visitid,mrn,visitid)
ERROR at line 1:
ORA-00957: duplicate column namePlease give different names to each column.
Something like this..
SQL> CREATE OR REPLACE VIEW pacviewproforma (MPROFORMA_mrn,MPROFORMA_visitid,TPROFORMA_mrn,TPROFORMA
_visitid,MTRANSBILL_mrn,MTRANSBILL_visitid)
2 As Select
3 PAC051MPROFORMA.mrn,
4 PAC051MPROFORMA.visitid,
5 PAC051TPROFORMA.mrn,
6 PAC051TPROFORMA.visitid,
7 PAC052MTRANSBILL.mrn,
8 PAC052MTRANSBILL.visitid
9 from PAC051MPROFORMA,PAC051TPROFORMA,PAC052MTRANSBILL
10 where
11 (PAC051MPROFORMA.mrn=PAC051TPROFORMA.mrn)
12 and
13 (PAC051TPROFORMA.mrn=PAC052MTRANSBILL.mrn);
View created.
SQL> DESC pacviewproforma;
Name                                      Null?    Type
MPROFORMA_MRN                                      NUMBER
MPROFORMA_VISITID                                  NUMBER
TPROFORMA_MRN                                      NUMBER
TPROFORMA_VISITID                                  NUMBER
MTRANSBILL_MRN                                     NUMBER
MTRANSBILL_VISITID                                 NUMBER
ORA-01730: invalid number of column names specifiedThe list of column nmae you specified during the CREATE VIEW should match with the SELECT list of the view.
Twinkle

How join a type table data with a real table.

Hello,
I want make a join with a type table data and real table.
But i don't know how make this.
Can you help me?????
I have this pl/sql:
SET LINESIZE 5000;
DECLARE
valor NUMBER;
TYPE reg_tablita IS RECORD
(cuenta B_TB_CTAFACTU.B_CO_CTAFACTU%TYPE,sistema B_TB_CTAFACTU.B_CO_SISTEMA%TYPE);
TYPE Tabla IS TABLE OF reg_tablita INDEX BY BINARY_INTEGER;
I BINARY_INTEGER;
Array Tabla;
BEGIN
Array(1).cuenta:='000001';
Array(1).sistema:='AA';
Array(2).cuenta:='000002';
Array(2).sistema:='BB';
Array(3).cuenta:='000003';
Array(3).sistema:='CC';
Array(4).cuenta:='000004';
Array(4).sistema:='DD';
Array(5).cuenta:='000005';
Array(5).sistema:='EE';
SELECT count(*) into valor FROM
TABLA A, Array WHERE
B_CO_CTAFACTU=Array.cuenta and B_CO_SISTEMA=Array.sistema
quit;
Thanks very much!!!!

You need to have the types defined as SQL types (created in database) in order to be able to use them for joining. PL/SQL object types can not be joined.

Issue with Dynamic WHERE condition in Cursor in FUNCTION.

Hi All,
I am facing an issue with cursor having dynamic WHERE condition in a function.
Below is the FUNCTION:
CREATE OR REPLACE FUNCTION EXCEPTION_MERGE(TABLE_NAME IN VARCHAR2, TAB_NAME IN VARCHAR2)
RETURN VARCHAr2
IS
stmt_tabcols VARCHAR2(32767);
v_columnname VARCHAR2(32767);
CURSOR C1 IS
SELECT 'A.'||A.COLUMN_NAME ||' = '|| 'B.'||B.COLUMN_NAME COLUMN_NAME
FROM
SELECT COLUMN_ID, COLUMN_NAME
FROM USER_TAB_COLUMNS
WHERE TABLE_NAME = TABLE_NAME
AND COLUMN_NAME NOT IN ('ERROR_TAB_ID','ERROR_LOAD_DATE')
) A,
SELECT COLUMN_ID, COLUMN_NAME
FROM USER_TAB_COLUMNS
WHERE TABLE_NAME = TAB_NAME
) B
WHERE A.COLUMN_ID = B.COLUMN_ID;
BEGIN
FOR TABCOL IN C1
LOOP
    stmt_tabcols := stmt_tabcols ||TABCOL.COLUMN_NAME||',';
END LOOP;
    stmt_tabcols := RTRIM(stmt_tabcols, ',');
    RETURN stmt_tabcols;
END;
SELECT EXCEPTION_MERGE('WC_W_TEST_FS','WC_W_TEST_FS_GBL') FROM DUAL;It throws, below error:
ORA-06502 : PL/SQL : Numeric or value error : character string buffer too smallIf I REPLACE TABLE_NAME and TAB_NAME with hard coded values , it works fine. Can somebody look at the code and let me know the issue.
Edited by: ace_friends22 on Sep 9, 2012 1:08 PM

Etbin neatly demonstrating the value of posting code in a manner which makes it easy to read.
It's obviously an naming/scoping issue. Faced with a join like this:
where table_name = table_namethe engine looks for something called table_name in the current scope. It finds it, a column on USER_TAB_COLUMNS and applies it to both sides of the filter. It has no way of knowing that there is also a parameter called TABLE_NAME, because that is outside its current scope. Consequently the query will join every table in your schema regardless of what values you pass, and that's why you blow the buffer.
Takw etbin's advice and name your parameter with a prefix:
where table_name = p_table_nameThis isn't a column in USER_TAB_COLUMNS which will force the engine to look in the next scope up, which in your case is the function, where it will find your parameter and so generate a query for the passed values only.
Cheers, APC
Edited by: APC on Sep 9, 2012 8:03 AM

Export and import table data with Java

I need a library for simple exporting and importing table data.
The data should be exported to a SQL file with insert statements.
I just want to tell the library the table name, the connection and where to store the file. The usage should be very simple.
Are there any small libraries for this? Finished calsses and methods which I can just call?

I need a library for simple exporting and importing
table data.
The data should be exported to a SQL file with insert
statements.Every database has utilities to export/import data from tables. Take a look at your database manual.

Select three tables data with Same where condition

Similar Messages

Maybe you are looking for