Selectable Dialog Panel Tab Order Reversed when Plug-In compiled with XCode 3

Hi,
I'm not sure if anyone has seen this before, but I am experiencing
a problem with the order of the panel tabs in a selectable dialog when compiling
a CS3 plug-in using the following configuration.
OSX 10.5.4
XCode 3.
ID SDK 5.0.3
The problem is evident in the sample SDK plug-in "BasicSelectableDialog"
Other than the obvious ( i.e. use XCode 2.4.1 ) is there a simple configuration fix for this??
Regards,
Mike.

Update::
Seems to be a problem with the ResourceEnabler or the call to CDialogCreator::GetOrderedPanelIDs() in the GetOrderedPanelIDs call in the dialog creator.
The list returned is always empty when compiled in XCode 3, but filled in when compiled using XCode 241.
Regards,
Mike.

Similar Messages

Form tab order changes when data is emailed as .xml

.xml data is in a different tab order on the pdf. form Why is the data order changing, when user uses the submit by email button?

Hello Paul,
I tried tried and tried ..But I found no solutions for it . Could you please help me a bit ??
Thanks.
Bibhu.

Disable "Show Tab Order" default when opening document

I've been trying to figure out what I did to my installation of LiveCycle Designer but, on my workstation, it is somehow set to "Show Tab Order" by default when opening an existing PDF form for editing. This means that I have to turn off this feature EVERY TIME I open a document. It's really wearing on me as I open hundreads of PDF forms in a day's time. I'd say I've lost many hours of productivity just turning off this feature... Does anyone know how to turn off this display feature until requested?
Thx everyone!

Yes... at the moment, PDF final view control via InDesign is lacking... in fact it isn't there at all. This has to be done from Acrobat. However, it is possible to make actions in the action wizard so the process isn't so tedious. I have written about this elsewhere: See it at the final size – view size and Acrobat | Colecandoo!
Colin

Import tab is misssing when doing the GR with MIGO

Hi,
When we do the GR for an STO or Purchase order with MB01,The Import tab is seen in the material document.If we use MIGO to do the GR then the Import tab is not seen in the material document screen.Need your help if there is any config that is controlling or there is any Exit for this.
Regards
Sreejith

Yes,
This is Import PO Process.
Regards
Sreejith

T400 Shuts down when plugging in monitor with VGA

My T400 shuts down instantly when I plug I my monitor (Dell WA2209). If I shut down the computer, and then try starting the computer with the monitor plugged in, the computer shuts down almost instantly after I press the power button. In each case, I have to unplug the computer, and remove the battery, before I can try turning the computer on again. I have installed the latest power manager, video drivers and bios. On the odd occasion, I am able to plug in my monitor without the computer shutting down. This happens when using integrated and discrete graphics. It worked for almost a year just fine, and just recently started doing this. Any ideas?
Thanks in advance!
Other info: Win 7 Ultimate (64 bit)
Solved!
Go to Solution.

try a different vga cable.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

ITunes freezes when plugging in phone with podcasts

I have an issue where anytime I plug in my iPhone 3GS, iTunes will freeze if I have any Podcasts that I had downloaded separately to my phone. If I delete the podcasts the phone, I'm fine -- but I'd rather not have to delete my podcasts every time I want to sync.
I have "manually mange music" checked for my phone. Is this part of the problem?

My workflow is to never download anything from the iTunes store, app or otherwise, directly into my iPhone.
Phil

Enable detailed telemetry selected in Flash CC but Scout still says to compile with the -advanced-telemetry option

Firstly, hitting control-enter to test a game in Flash CC (latest version) does not activate anything at all in scout. If I compile the swf and double click the swf from windows explorer, the data will show up, but I can't see any advanced telemetry - Even if I compile the swf with 'enable detailed telemetry' selected.
I can never see advanced telemetry no matter what I have tried. When testing a movie from within flash CC, scout never recognizes that a swf is even loaded, however I can get basic telemetry from with a web browser, or when running the application as standalone from explorer.

Once you go to publish settings and enable "Enable Detailed Telemetry" option and then go to the AIR for IOS Settings dialog, you should see the "Telemetry Options" section as shown below. Are you not seeing this? what is the type of document that you are creating?

Error when trying to compile with cos.jar

When compiling on linux/tomcat machine I put the path to cos.jar in my javac command and get the following error:
.../cos.jar: cannot execute binary file
I can compile servlets that do not require this jar file but cannot compile servlets that need it.
Does anyone know how to resolve this?

Then your command is wrong. The error message tells you that you're trying to execute the cos.jar instead of specifying it in the classpath.

How to Control the "tab order" in Adobe Captivate 8?

Hi Guys,
I was just trying to insert "tab order" to the module that I am creating using Adobe Captivate Version 8. I was not able to insert the tab order feature when I switched to the responsive project mode (project for Destop, Tablet, and Mobile).
Kindly guide me to insert tab order. I have checked all the online resources but was not able to find the relevant steps to create "tab order" in Captivate 8.
Thanks!
Peace

Hi,
You can set the Tab order for Interactive objects from the Properties panel:
This will open a dialog where you can arrange the order for all the interactive objects on your slide.
Hope this helped!
Regards,
Mohana

Edit Tab Order Bug??

I've upgraded from CVI 8.1 to CVI 2010 a short while back, and while working on a project recently, I noticed that the Edit Tab Order functionality no longer seems to work properly. I still have 8.1 installed on the same PC. If I open an old project in 8.1 and edit tab order, everything works just fine. I can set a value in the "Click to set" box and point to the control that I want to set and the value is applied. However, if I do the same thing in CVI 2010, when clicking on a control that I want to set, the value is NOT set and the other control tab order values get all screwed up. I've seen the issue on a 64bit Windows 7 Laptop as well as a 32bit Windows XP computer.
Is this a known bug?? I haven't seen it mentioned anywhere. Should it be reported someplace else? This essentially makes the Tab Order functionality useless, and is a bit frustrating on a panel with a large number of controls.
Thanks!

I figured out my issue, and it is actually consistent in both v8.1 and 2010. The issue is that I have a Decoration Frame around a group of controls. When previously testing in v8.1, I did not have a frame around the controls. That's why it worked.
So... Once a frame was inserted (in either version of CVI), any controls that the frame surrounded could no longer be selected in the Edit Tab Order window. Selecting ANYWHERE inside the frame only selects the frame tab order and NOT any control inside the frame. After a little trial and error, I found that this was related to the Z-Plane order of the frame. The frame is a bit misleading in that all the controls are clearly visible inside, but the frame still lies ON TOP of them. Once I selected the frame and "Arrange>Control ZPlane Order>Move to Back", I could then edit the tab order of the interior controls as expected in the Edit Tab Order window.
Sorry for any confusion. Hopefully my little snafu might help someone else at some point in the future.

"Tab" control and Tab order of controls inside the tab

Hello everybody,
I have created the tab control with 6 'tabs', inside every tab I have some controls, like edit fields etc. I wanted to make an order of controls for every tab, so I have selected the option "Tab-order settings" from menu "Edit" (sorry for translation, I use non-English version of LabView), and tried to set the order. After saving it with "OK" button it turned out that the order is not changed. Simple it seems that the option doesn't work for controls in tabs. Is this a bug or do you have a solution for this?
TIA,
Yazilim.

Sorry LabviewGuru, but I haven't found anything concerning Tab control and tab order inside it. Of course, I have found the topic "tabbing through front panel objects", but it simply describes how to change order for standard controls, not for controls which are inside the Tab control. But maybe you have another, extended help? So can you please copy and paste to discussion forum message this part of your help which concerns the Tab control and tab order, and then send the message?
TIA,
Yazilim.

I don't want some fields to be added in the Tab order.

I dragged a few objects from the OBJECT LIBRARY, say
1. TextField1
2. TextField2
3. TextField3
4. Text1
5. ImageField1
6. Button1
7. CheckBox1
8. CheckBox2
Then I selected 'TAB ORDER' from the 'VIEW MENU' now I want to keep out 'ImageField1' and 'Text1' from the tabbing order.
Please guide me with clear words, quick replies are expected and will be appreciated.
Thank You,
Y.D

Hello, I presume you dont want the end-user editing these objects either? If thats the case then use static objects instead. Static objects are not included in the tabbing order. Yes, they are identified with a number when you enable the View | Tabbing Order but only to identify them as part of the reading order. Remember, the tabbing order and reading order share the same sequence. See if you can use a static image instead of an image field. I presume Text1 is already a static text object therefore it wont be tabbed into. If you cant replace the image field with a static image then you can use a workaround. You can protect the access to a field. Protected fields do not participate in the tabbing sequence. Designer does not expose this property so you will have to specify it manually. For example: 1. Select the image field. 2. Go to the XML Source. If it not opened, go to the View menu and select XML Source. It will show up besides the Preview PDF tab. 3. The <field> element will be highlighted. Type access=protected. For example: <field name="ImageField1" y="25.4mm" x="57.15mm" w="25.4mm" h="30.4mm" access="protected"> 4. Preview the form. Does this help solve your problem? Hélène Adobe Systems

After ICS update problems typing when plugged in, and battery life shortened, also Dolphin browser runs slow.

I did the update and even did a factory reset, and I am having
problems typing when plugged in to the wall charger, I get random keystrokes,
from all over the keyboard, not just the keys around the one i want to press.
Dolphin browser is running supper slow, especially when on Facebook. The
battery life has lost at least an hour.

Phones will do that when plugged in, esp with cheap chargers.. it has to do with the voltage and coveting and the digitized screen. You can google if you want more indepth there
clear data out of dolphin,check for update? also read comments on the app maybe it sucks on ics
battery stats got erased when you did a factory reset, give it a few charge cycles

UI Problem: Selectable Dialogs with Tab & IListBoxController

Hi,
I'm trying to implement a configuration dialog with some tabs like the BasicSelectableDialog example from the sdk. I'm pretty sure I did all the relevant steps like defining LocaleIndex, IDList, IDListPair, Bosses etc. as well as the creator implementations. However when trying to pop up the dialog I get this error message:
"Cannot find IListBoxController on this selectable dialog. Is it a dropdown selectable dialog?"
In the ActionComponent I've implemented this:
if (dialogSwitcher == nil)
ASSERT_FAIL("BscSlDlgActionComponent::DoBasicSelectableDialog:DialogSwitcher invalid");
break;
} //ASSERT does not fail, I get the dialogswitcher
//still ok
dialogSwitcher->SetDialogServiceID(kConfigDialogTabService);
// this produces the error stated above:
dialogSwitcher->SwitchDialogPanelByID(kProjectTabWidgetID);
As a matter of fact, I don't know what Indesign wants to tell me with this, Listboxcontroller? Why would I want something like that on my dialog? ; ) Ok seriously, I guess I'm missing _some_ list definitions/declaration, propably of what should be in the panel, but the IDList is(are) defined in the fr file, so what else is missing?
Below some snippets from my code, the resource defs for the dialogs are missing but they are just the same as in the sdk example.
//Dialog holding the tabs
type ConfigDialog(kViewRsrcType) : DialogBoss(ClassID = kALConfigDialogBoss)
//a tab (other tabs are just the same, so I'm leaving them out
type ProjectTabWidget(kViewRsrcType) : PrimaryResourcePanelWidget(ClassID = kALProjectTabBoss)
//tab list
resource IDList (kConfigDialogTabOrderingResourceID)
kALProjectTabBoss, //correspondingWidgetID is kProjectTabWidgetID
kALOtherTabBoss,
kALAnotherTabBoss,
resource IDList (kProjectTabCreatorResourceID)
kConfigDialogTabService,
resource IDListPair (kProjectTabCreatorResourceID)
kConfigDialogTabService, kProjectTabResourceID, kALPluginID,
resource LocaleIndex (kProjectTabResourceID)
kViewRsrcType,
kWildFS, k_Wild, kProjectTabResourceID
//and the class defs, they CreatorImpl's were adapted from the sdk example
Class
kALConfigDialogBoss,
kTabSelectableDialogBoss,
IID_IDIALOGCREATOR, kConfigDialogTabCreatorImpl,
IID_IOBSERVER, kConfigDialogTabObserverImpl,
Class
kALProjectTabBoss,
kPrimaryResourcePanelWidgetBoss,
IID_IPANELCREATOR, kProjectTabCreatorImpl,
IID_IK2SERVICEPROVIDER, kDialogPanelServiceImpl,
Any help would be greatly appreciated, I know I can allways try to repeat the process of importing/adapting from the example until it works, but I really wan't to understand this and not just copy some code ; )
Thanks,
Marc

Solved, and ist really a "doh!": when defining the
NativeTabsWidget for the parent dialog holding the tabs I defined my own WidgetID for it instead of using SDK defined "kSelectDialogSelectionWidgetID" as ID. Don't ever do this ; )

HT1977 My Computer crashed so I have had to download iTunes all over again. The problem is now I can't sync my Apps to my iTunes. It doesn't let me arrange them or anything when plugging my iPad in. The screen is greylike and won't let me select anything

Hi Guys,
My computer crashed and I lost everything. I got a new one and downloaded itunes all over again. When I plug my ipad in even after authorising my computer it will still not let me edit anything on the ipad. The screen is grey like on the ipad section and i cant select an app or anything. I have transfered purchase apps but all it does is take movies and tv shows accross. It wont transfer the apps into itunes. Please help

As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
https://discussions.apple.com/thread/3305461

Selectable Dialog Panel Tab Order Reversed when Plug-In compiled with XCode 3

Similar Messages

Maybe you are looking for