Selected subpicture is not shown on certain buttons

I have various menus that were created in Photoshop. Most of them have a home button in the left top corner and a next button in the right top corner. Both buttons are almost inside the title save area. For all buttons I'm using one colored underlines as the selected subpicture. When I click the show subpicture command in the design menu view I can see all the subpictures. If I preview the menu the selected subpicture is not shown for the two top bottoms when they are selected, but they are shown for all the others. I don't understand it. The buttons look the same in Photoshop. Does any body have an idea what can cause this problem?
Marcus

I did some more testing with minimal menus and got very wired results:
I found out that the cause is the position of the button. I have a PAL widescreen menu. It is 576 pixel high. If the button with the underline is in the top ~120 pixel the selected subpicture is not shown. If I move the button in the 120 to 220 pixel range the line is shown thinner and below about 220 pixel the line is shown when selected. If I move the button up again and preview the subpicture is not shown again.
Now, if i move the subpicture from under the text left or right of the text, first it is not shown either, but if i move the whole button below the critial position and then up again it is suddendy show. Still in same cases the line was shown thinner.
I moved the selected line from next to the text back to under the text while the button is in the upper range and -bang- the subpicture is not shown again. I did all those changes in Encore design view.
Marcus
Show Selected subpictures (the underline is also shown when it is under the text):
Button selected with subpicture below of button text:
Button selected with subpicture left of button text:
PSD layers (comment: the highlight or the return button is a filled pixel layer, the others are shape layers)

Similar Messages

  • Slideshow not resuming after certain buttons are used?

    Hello,
    I have this slideshow that I'm so close to having completed, but there's one issue I'm having with it not resuming after certain buttons are used. I've tried to figure out what could be causing this but I just can't see what it could be. I feel I'm so very close to having this completed if it weren't for this one issue.
    In the slideshow buttons '1' and '2' work perfectly, however buttons '3' to '6' are not working completely as they should. During the slideshow, as it plays through the slides if you click on button '1' or '2' you are taken to the corresponding slide and then the slideshow automatically resumes, which is correct. However, if you click on any of buttons '3' to '6' you are still taken to the corresponding slide, but the slideshow does not resume and stays on that particular slide. I've looked over the Action Script 3 code several times and I just don't see what could be causing this but I'm not too experienced so there could be some error, no matter how minor, that I am missing.
    I've attached the file and if anyone has any advice at all or can help in any way I would REALLY appreciate it!
    Thank you,
    William

    In looking at the post I just made just now, I notice my attachment didn't come through. I'm not sure why this happened, but here is the code I'm using for the buttons:
    btn1.addEventListener(MouseEvent.CLICK, btn1ClickHandler);
    function btn1ClickHandler(event:MouseEvent):void
        gotoAndStop(10);
    play();
    btn2.addEventListener(MouseEvent.CLICK, btn2ClickHandler);
    function btn2ClickHandler(event:MouseEvent):void
        gotoAndStop(55);
    play();
    btn3.addEventListener(MouseEvent.CLICK, btn3ClickHandler);
    function btn3ClickHandler(event:MouseEvent):void
        gotoAndStop(105);
    play();
    btn4.addEventListener(MouseEvent.CLICK, btn4ClickHandler);
    function btn4ClickHandler(event:MouseEvent):void
        gotoAndStop(150);
    play();
    btn5.addEventListener(MouseEvent.CLICK, btn5ClickHandler);
    function btn5ClickHandler(event:MouseEvent):void
        gotoAndStop(210);
    play();
    btn6.addEventListener(MouseEvent.CLICK, btn6ClickHandler);
    function btn6ClickHandler(event:MouseEvent):void
        gotoAndStop(259);
    play();
    And here is the code I'm using for slide images:
    link_1.addEventListener(MouseEvent.CLICK, link_1ClickHandler);
    function link_1ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=gifts%20worth%20givin g%20can&pricing=cad"));
    link_2.addEventListener(MouseEvent.CLICK, link_2ClickHandler);
    function link_2ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CU7323&pricing=CAD"));
    link_3.addEventListener(MouseEvent.CLICK, link_3ClickHandler);
    function link_3ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7292&pricing=CAD"));
    link_4.addEventListener(MouseEvent.CLICK, link_4ClickHandler);
    function link_4ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.apple.com"));
    link_5.addEventListener(MouseEvent.CLICK, link_5ClickHandler);
    function link_5ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/EN-US/redirect.aspx?ssk=CL7306&pricing=CAD"));
    link_6.addEventListener(MouseEvent.CLICK, link_6ClickHandler);
    function link_6ClickHandler(event:MouseEvent):void
        navigateToURL(new URLRequest("http://www.debcosolutions.com/en-us/categoryredirect.aspx?categoryid=shocking%20deals%20-% 20cl&pricing=cad"));

  • [Solved] Some icons are not shown in certain websites.

    For example:
    trello.com
    gist.github.com
    is like this:
    many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
    It also happens to a gitlab server site I set up:
    How can I debug this? Does it happen at your place?
    EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
    Last edited by xgdgsc (2013-06-08 12:38:08)

    Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Answer - Suject Area - Selection Panel - Columns not shown

    Hello expert,
    I have created the physical tables, created the Business Model and Fields Mapping, drag the logical tables to the presentation layer. The consistency check is good. However when I start the Presentation Services -> go to Answer -> Select the subject area. However, I am unable to create the report because no columns are shown under the logical tables. Anyone knows why? I have deleted all the temp internet files before start the browser.
    Thanks,
    Wes

    Hello expert,
    Strange. The columns show under the table on the Selection Panel in Subject Area this morning. I'm not sure that whether it is on-line or off-line problem. It appears to be. This morning I just open the rpd on-line and drag the tables to the presentation layer. Then activate the presentation services on my PC, the columns show.
    Thanks.....

  • DB-Objects not shown in Tabs (right hand side)

    From here to now (re-opening the sql-developer), the selected object is not shown on the right hand side tab pane.
    Double clicking a package show the package in editor mode. Just selecting does not show it in read-only mode.
    No way to see info and/or data for tables and views.
    Also, other objects not shown.
    Version 1.5.4
    Suggestions? Excect upgrade to ... (whatever).

    2.1 installed, works.
    CRC-Error on dbui4.jar. I assume that was the reason.

  • Cc cleaner has altered page layout, missing buttons, pictures not shown with txt but below, certain pages also not now intertactive..cannot scroll and over buttons and click to enable choice. help to

    Hi, Please help.
    I'm currently using Firefox v4.0.1, which I like and am happy with, as it allows me to use my Kaspersky link filter and virtual keyboard.
    Anyway, I recently decided to clean my registry and history using cc cleaner.. I did not back up as I had never experienced problems before. Once cc cleaner had finished and I opened Firefox I noticed that my two home page layouts had altered. The Supanet home page is now all disjointed, buttons are scattered to the left and right of the page, where once they where side by side, all of the images and text seem to be beneath each other and instead of one page i now have to scroll down and down to the full page, all text and image seem to be left margin.
    On the google home page certain buttons are there but the text within has disappeared, although the buttons work, a search for Mail online through google..(or Supanet home page) is not a problem, however, once we arrive at the site it pretty much displays the info in the same layout/manner as the Supanet hompage. Further more certain buttons on other sites are no longer interactive..eg, Asda voucher print out. i do not wish to update to other version of firefox as i would lose Kaspersky buttons..so please help..I've tried everything..even re installing version 4.0.1..Help, I now it must be simple..but I'm not a techie!! Many thanks!

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates"<br />
    The Firefox Firefox 4.0.1 version that you currently run is no longer supported with security updates.
    You can find the latest Firefox release in all languages and for all Operating Systems here:
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  • Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

    Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
    == This happened ==
    A few times a week
    == Couple of weeks ago

    Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • Active Focal Point Not Shown in Software Using Back Button Focus

    I use Back Button Focus (BBF) and set the focus point (using center spot).
    In the software (DPP, ZoomBrowser or EOS Utility) the point I selected is not highlighted in the view window.
    All points are shown, but none highlighted.
    If I take the same shot using default focus method (shutter button AF), the point is highlighted .
    Why is this?
    Not too technical, please
    Canon 3Ti, EF 50mm f/1.4 USM, EF-S 18-55mm f/3.5-5.6 IS II, EF-S 55-250mm f/4-5.6 IS II, 320EX Speedlite

    Thanks.
    I did just download and install the updates (DPP, EOS, Picture Style Editor and Zoom Browser).
    Still no red focus point(s) shown with Back-button Focusing.
    I searched on the web for this "symptom" and found, that I'm not alone.
    It seems in Back-Button Focusing, the focus point won't be displayed unless you hold the back button down (* button  in my case) while pressing the shutter button.
    I tried holding the * button while taking a shot and yes the red box shows up.
    This seems like defeating the usefulness of back button focusing. (???).
    What do I know? I'm just a newbie.
    Canon 3Ti, EF 50mm f/1.4 USM, EF-S 18-55mm f/3.5-5.6 IS II, EF-S 55-250mm f/4-5.6 IS II, 320EX Speedlite

  • Perssonas not being displays - Themes are but top of window not colour and firefox button not shown correctly

    I have installed the personnas plus add on and have tried to select several different personnas (e.g. Earth from space etc.) but none of them appear to be displayed. The window remains its default light blue.
    I am not aware that i have installed anything else which could have affected this situation.
    When attempting to apply a full theme the very top bar of the window (with minimize, exit etc.) is also not coloured as it should be - see the theme FT Deep Dark 5.6 for example. And the firefox button has an orange 'fuzzy' ' glitchy' border around it still.
    Cheers if anyone knows anyway around this problem :>

    hello Kirie_kore, it is a known issue that light-weight themes are currently not shown when firefox is set to ''never remember history'' (a.k.a. always run in private browsing mode) in firefox/tools > options > privacy. this will be corrected in the upcoming firefox release.

  • The maximize/minimize and close and buttons are not shown correctly when FF windows is maximized.

    I have the same problem on all my computers, one running Windows 7 and two with Vista.
    The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.

    It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
    Open the system menu via Alt+Space and see if you can resize that window.<br />
    If that works then close Firefox to save that setting.<br />
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    See http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Report Painter - data not shown at first selection

    Hello,
    we have a Report Painter report for cost centers.
    If we start the report with normal selection the values of the cost centers are not shown at the first look.
    The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
    "This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
    But there are values, but they are only shown if we switch to another cost center and then switch back.
    All rows that are selected the first time show no values, at the second time the values are there.
    Does anybody know the reason for this?
    Thank you & regards
    Britta

    Hello,
    starting the report with the selection of a cost center group.
    This group is shown on the left side, the values in sum of the right side.
    To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
    To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
    Clicking on the next cost center also the "no data" information is shown.
    Now switch back to the first cost center on the left side and then the values are shown on the right side.

  • All master data values not shown in query selections

    Hi
    I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
    I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
    As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
    Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
    Then I deleted the contents of the InfoCube. It still shows the original 25 values.
    The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
    The problem is the same in LISTCUBE
    I hope some of you can help we with this.
    Thanks
    /Karsten

    Hi Hari
    1) Reactivated the master data, said it was already active.
    2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
    I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
    I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
    Thanks for all the input guys.
    /Karsten

  • Certain symbols are not shown ( see screen shot) How to resolve?

    From this website the logo and arrows are not shown whereas when I am using internet explorer they do show up. What is wrong in my settings and how to adjust these?

    Hello,
    As I can see it is a narrow box with two rows of two characters? Firefox displays that code when it cannot find the corresponding character in any available font. The most common reason to see this is that some sites are now replacing image icons with font characters that Firefox has to download. If you have set Firefox to:
    * use only your preferred fonts instead of the page's preferred fonts
    * not download fonts (either in about:config or using the NoScript extension)
    then you would need to change that in order to see the icons.
    First check your font settings here:
    "3-bar" menu button (or Tools menu) > Options > Content
    Click the Advanced button and make sure there is a check in the box for "Allow pages to choose their own fonts".
    If you change that, try reloading the page. Does Firefox load the missing icons?
    If that doesn't fix the issue then do the following:
    You can check the '''gfx.downloadable_fonts.enabled''' pref on the '''about:config''' page (you can go to it by typing about:config in your address bar) and make sure that it is set to true (if necessary double-click the line to toggle its value).
    Sometimes it also happens because of the slow connection. Due to slow connection the text which takes less space are somehow downloaded but the image couldn't get downloaded within the connection time frame.
    Hope it helps.

  • When I select a page to bookmark all my bookmark folders are not shown so that I can enter the page in that bookmark folder.

    I have a list of bookmark folders. When I want to bookmark a page I select "bookmark this page" but not all of my folders are shown. If the folder is not shown I can not get it to be filed in that bookmark folder. How can I get all of my bookmark folders to be shown. When I go to show "all bookmarks" and select "bookmarks menu" all are shown. I am using firefox 8.0.
    I have updated to firefox 8.0.1, did not change the problem. When I show all bookmarks I have 11 folders but when I try to bookmark a page only 5 folders are shown not all 11, why?

    The problem is that not all of my bookmark folders are shown when I want to bookmark a page. They are shown when I "show all bookmarks" Ctrl+Shift+B but not when I want to bookmark a page. The article how to use bookmarks does not solve my problem. The folders are not shown so I can not use them. Why?

  • Helpful and Correct icons are not shown (anymore) on certain threads only

    I think there is a bug somewhere as i.e. at the top of this thread Re: Need Help in writing the Business Rule
    I can read "This question is answered. Helpful answers available: 5. Correct answers available: 1. "
    But not a single of the following answers shows the helpful (yellow star) or correct (green star) icon.
    Is it only me or do others experience similar situations?

    Thanks. I think Justin's "non-intuitive" is worth a "correct".
    BluShadow is "correct" too.
    When I click on correct OR helpful next to this post (no matter which of them) I get shown a radio button where I can choose only one of this two: "Yes, my question has been answered." or "No, my question has not been answered yet."
    I am not very much interested in the points but want to find "good answers" quicker when reading through different posts. And for this reason the icons are extremely helpful.
    I would suggest every answered thread must get at least one "green" icon in order to be closed. If there is no correct answer I would i.e. have to post my own solution to it and this would get the "green" icon which could be altered i.e. to a blue one or so...
    Thanks everyone anyway. I am now going to try to give some points, as I now above this text do choose "Yes, my question has been answered." :-) Hopefully I will get a change to give some points after this or I will know that "answered" will mean "closed" ;-)

Maybe you are looking for