Selecting Customer Report

Hi,
We are using customized customer transaction report developed in ABAP. When preview, the selected customeru2019s transaction report list comes out in one page, scroll down to see the next customer. On the list of customers the user wants to further filter by select only few customers and the selected customeru2019s report attach in PDF and sent to customer through email.
My question is what are the options include to select few customers when it was in preview mode?
Please suggest.

For example in the initial screen we need to give customer range let say 1 to 20, then execute the range 1 to 20 customers transaction report list was previewed, scroll down to see the next customer. In this stage i.e. preview stage the user wants to select only few customers let say 5, 7, 11, 16 and 19. Then only these selected customer report attach in PDF and send to customer through email.
How they can select when preview mode? And what are the options to select few customers?

Similar Messages

  • RESCIS - Unable to select custom report from Selection Screen

    Hi all,
    we have developed a custom report for transaction "RESCIS-Evaluation of service charge settlement" but we have found that althought the report appears in selection screen field called "REPORT" it throws message RESCIS003 but the report is not shown.
    If we doesn't fulfill report field in selection screen, the program shows a second screen where a couple of ALVGrids are shown allowing the user to select the report that will be displayed. Here we are able to select our custom report and the data in it is displayed.
    We have analyzed the standard program that is executed via transaction RESCIS and we've found that the selection screen executes standard function RESC_GUI_ANYREPORTS_APPL that doesn't executes reports dinamically but statically. That means that SAP doesn't allows to execute custom reports directly from selection screen.
    I think this is a SAP error but afert opening an OSS message SAP sais that is not an error but a bad configuration or lack of knowledge for customizing it.
    Has anyone developed a custom report for RESCIS transaction?

    Hm what exactly did you want to change? Normally it is in REFX cases you should not copy standard REPORTS. In your case with transaction RESCIS, I myself do not see any need to add any functionality in this report because it is only a sum of all lists from your service charge settlement. What else do you want to see there?
    For displaying new fields in the separate lists maybe there is some BADI for it.
    Regards
    Michael

  • Need to take part of selection criteria out of a custom report (R painter)

    Hi Experts..
    I have a requirement to hide cost elements/group which appear as part of selection criteria on our custom report (report painter) for projects.
    1. Why this appears as part of the selection criteria as i did not find this defined in Edit --> General data selection. (I only found  CO area, Valuation, Fiscal year, Period, and Object in there).
    2. We have found a system performance issue when a user put in cost elements for selection. So I am required to take this out. I thought i can just take this out from General data selection.. If I can't find it in there, where would i be able to do that??
    3. Suppose I would hide this selection by creating a screen variant.. I was looking in SHD0
    but its not working with our Z T.Code...it display the error message "Variants are possible only for dialog transactions"... This does not seem to work with a custom t-code. Then how would I do this ????
    Please help clarify on this ....
    Thanks....
    Monica
    Edited by: Monica Kong on Aug 24, 2008 6:01 AM

    Hi Monica,
    I believe we have an executable report here...
    go to se38 -> enter program name -> click on "attributes" button -> display
    We can see the type as 'Executable' or 'Modulepool'
    generally a selection screen is brought by using keywords 'Parameters' or 'select-options' in Executable programs and with screen in modulepool ..although we can use a combination of both in some cases
    So in your program..
    check for keywords
    'Parameters'/'Select-options'
    The best way to proceed is to press F1 on the field that needs to be removed from selection...note the details
    "screen number" and "screen field"
    (1)By default screen number = 1000  if it is an executable program
    Now see the scrren field ..if it is select-options it will something like field-low or field-high
    so in the report
    search for field for cost center and group with keyword starting as parameters or select-options and comment the same
    Remember to comment tte fields throughout the program since this field will be used in multiple locations
    (2) if it is modulepool program note the screen number , go the program and screen and remove the field from screen painter and comment the fields where ever used in the program
    Also note that using screen variant is a good option but done if user needs specific settings on a report or we need the original report as it is plus additional report with few variations
    Hope it helps
    Pls check and revert
    Regards
    Byju

  • Bypassing selection screen in custom reports added to MSS reporting

    I have created a custom report (using PNP) in R/3 and added it to the MSS reporting (not Launchpad). Even though the manager is selecting his subordinate employee and clicks report result, he still sees a selection screen which i have defined in the custom report.
    When the manager runs a sap standard report RPTABS50, he sees data of the employee only he selects.
    How do i bypass the selection screen in the custom ABAP report i have added to the MSS?
    Thanks.

    Has to take an alternate approach. Picked a standard report by SAP and modified to our requirements.

  • All line items on a Cost Center Are archived, do not see in custom reports - error No actual line items were selected

    Hello, experts !
    Please advise,
    I have a cost center,
    on witch I know there are bookings,
    1. I do KSB1, have message "No actual line items were selected"
    2. I select - extras - data source - archive
    in this way I can see my items.
    ok.
    maybe all bookings are archived.
    no:
    I de a new movement on this CC - KB11N (exemple) - and on the new one I have the same problem
    I se it only when I check "archive",
    and do not see it on custom reports.
    Why ?
    Ay idea ?

    Dear Jonny,
    Check the T Code: S_ALR_87013611
    Then T Code: KSB1 by removing all the filters like date restriction..etc.
    Still if you are not finding the postings:
    Check the postings in the T code FAGLB03 - Display Balances by giving GL Account.
    Postings happen in co module if there is a cost object.
    If there is no cost object it will not flow to controlling, that will be in FI.
    What you need to do is:
    Select your GL
    Select your Payment date
    Select your Document number.
    You can check the same in FBL3N also.
    go to the transaction summary and verify the cost object whether it is a cost center or Order...etc.
    Also check whether the payment is in parking stage ....?
    Regards,
    Pavan Kumar Arvapally

  • REPORT PAINTER - Add a field to a selection screen - custom report

    Hi,
    I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
    Thanks a lot,
    Julien

    Hi Julien Girard ,
        Could you please check the below link :
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
    Regards,
    S.Manu.

  • REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT

    Hi,
    I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
    Thanks a lot,
    Julien

    Hi Julien Girard ,
        Could you please check the below link :
    http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
    Regards,
    S.Manu.

  • Custom Report for Asset Intelligence including Collection selection

    Dear all,
    I'm struggling with an custom report for doing the following thing.
    I have labeled software with the custom label 3 in the Asset Intelligence.
    I like to create a Report where i can Choose my Collection and then the Label that should be displayed.
    Similar to the Report: Software 10A - Software titles with specific multiple custom labels defined.
    But i like to choose more than one Label 3.
    Does anybody have something like that? Its really complicated for me to edit that report.
    Thanks & Regards
    Flat

    Hi,
    You could post this question in SQL forum to see if someone there can edit the report.
    The following document could help you to custom the report.
    Getting Started with Report Builder
    https://msdn.microsoft.com/en-us/library/dd220460.aspx
    Best Regards,
    Joyce
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Error while running a custom report in OIM

    Hi All,
    I have created a new custom report for OIM and written a stored procedure for that. But while running the report from Admin console, its throws the below error:
    java.sql.SQLException: ORA-00911: invalid character
    ORA-06512: at "IDM.XL_EXCEPTION", line 149
    ORA-06512: at line 1
    ERROR,19 Jun 2011 22:09:31,665,[XELLERATE.WEBAPP],Class/Method: ReportAction/displayTabularReport encounter some problems: Error executing stored procedure
    Thor.API.Exceptions.tcAPIException: Error executing stored procedure
    Line 149 : DBMS_OUTPUT.PUT_LINE('select stmt ='|| select_stmt);
    "select_stmt" is a select query based on the OIM tables.
    Please advice.

    Seems like there is a invalid character in your SQL (Report's store procedure). Could you share with me whole content of this "select_stmt" variable?
    regards,
    Thiago L Guimaraes

  • How to convert the customized report sales price list into excel sheet

    hi friends,
    i am faceing the probulem in VK13 report is not conveting into excel sheet, then i developed the one customized report,
    in this report i am using the tables are a506, konp,and makt, result is coming and it converted into excel sheet in my systam. when i was clik on the excel sheet icon it comming  excel format it working fine and save it. But in menubar list>export> localfile and select redio button spredsheet this navigation only it print the three colums not coming the total colums,
    same program test in another system it not converted into excel sheet, when i am click on excel sheet icon  it's given the message is 'VIEW CAN NOT BE SWITCHED, PRODUCT NOT INSTALLED OR INTEGRATION NOT ACTIVE'. but i giving the print privew it giving the three colums only,.
    In program i am using regular using reuse_alv_grid_display FM only.
    sorry this qusition is repeted becuse before that one mising some text.
    any one plz help me.
    thanks
    raj

    nice answer

  • Custom Report Giving Exception

    While calling my custom report from webconsole i am getting these exceptions
    Class/Method: tcReportOperationsBean/getPagedReportData encounter some problems: {1}
    Caused by [Nested Exception]:
    java.sql.SQLException: Missing IN or OUT parameter at index:: 16
    and
    C lass/Method: ReportAction/displaySectionalReport encounter some problems: Error executing stored procedure
    Please do give some suggestion.

    I am trying to find why this page does not appear : front_page_admin.cgi. My machine address is :http://y2k/identity/oblix/apps/admin/bin/front_page_admin.cgi
    I also have encountered a problem when I was setting up identity console. It gave me an option to select a user but there were no users there, including Administrator. What might have been the cause? This is the serious and major problem. Thank you in advance. Adam Earthman

  • Custom Report taking more time to complete Normat

    Hi All,
    Custom report(Aging Report) in oracle is taking more time to complete Normal.
    In one instance, the same report is taking 5 min and the other instance this is taking 40-50 min to complete.
    We have enabled the trace and checked the trace file, but all the queries are working fine.
    Could you please suggest me regarding this issue.
    Thanks in advance!!

    TKPROF: Release 10.1.0.5.0 - Production on Tue Jun 5 10:49:32 2012
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Sort options: prsela exeela fchela
    count = number of times OCI procedure was executed
    cpu = cpu time in seconds executing
    elapsed = elapsed time in seconds executing
    disk = number of physical reads of buffers from disk
    query = number of buffers gotten for consistent read
    current = number of buffers gotten in current mode (usually for update)
    rows = number of rows processed by the fetch or execute call
    Error in CREATE TABLE of EXPLAIN PLAN table: APPS.prof$plan_table
    ORA-00922: missing or invalid option
    parse error offset: 1049
    EXPLAIN PLAN option disabled.
    SELECT DISTINCT OU.ORGANIZATION_ID , OU.BUSINESS_GROUP_ID
    FROM
    HR_OPERATING_UNITS OU WHERE OU.SET_OF_BOOKS_ID =:B1
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 0 0 0
    Fetch 1 0.00 0.05 11 22 0 3
    total 3 0.00 0.05 11 22 0 3
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173 (recursive depth: 1)
    Rows Row Source Operation
    3 HASH UNIQUE (cr=22 pr=11 pw=0 time=52023 us cost=10 size=66 card=1)
    3 NESTED LOOPS (cr=22 pr=11 pw=0 time=61722 us)
    3 NESTED LOOPS (cr=20 pr=11 pw=0 time=61672 us cost=9 size=66 card=1)
    3 NESTED LOOPS (cr=18 pr=11 pw=0 time=61591 us cost=7 size=37 card=1)
    3 NESTED LOOPS (cr=16 pr=11 pw=0 time=61531 us cost=7 size=30 card=1)
    3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=11 pr=9 pw=0 time=37751 us cost=6 size=22 card=1)
    18 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK1 (cr=1 pr=1 pw=0 time=17135 us cost=1 size=0 card=18)(object id 43610)
    3 TABLE ACCESS BY INDEX ROWID HR_ALL_ORGANIZATION_UNITS (cr=5 pr=2 pw=0 time=18820 us cost=1 size=8 card=1)
    3 INDEX UNIQUE SCAN HR_ORGANIZATION_UNITS_PK (cr=2 pr=0 pw=0 time=26 us cost=0 size=0 card=1)(object id 43657)
    3 INDEX UNIQUE SCAN HR_ALL_ORGANIZATION_UNTS_TL_PK (cr=2 pr=0 pw=0 time=32 us cost=0 size=7 card=1)(object id 44020)
    3 INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=2 pr=0 pw=0 time=52 us cost=1 size=0 card=1)(object id 330960)
    3 TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=2 pr=0 pw=0 time=26 us cost=2 size=29 card=1)
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    db file sequential read 11 0.01 0.05
    asynch descriptor resize 2 0.00 0.00
    INSERT INTO FND_LOG_MESSAGES ( ECID_ID, ECID_SEQ, CALLSTACK, ERRORSTACK,
    MODULE, LOG_LEVEL, MESSAGE_TEXT, SESSION_ID, USER_ID, TIMESTAMP,
    LOG_SEQUENCE, ENCODED, NODE, NODE_IP_ADDRESS, PROCESS_ID, JVM_ID, THREAD_ID,
    AUDSID, DB_INSTANCE, TRANSACTION_CONTEXT_ID )
    VALUES
    ( SYS_CONTEXT('USERENV', 'ECID_ID'), SYS_CONTEXT('USERENV', 'ECID_SEQ'),
    :B16 , :B15 , SUBSTRB(:B14 ,1,255), :B13 , SUBSTRB(:B12 , 1, 4000), :B11 ,
    NVL(:B10 , -1), SYSDATE, FND_LOG_MESSAGES_S.NEXTVAL, :B9 , SUBSTRB(:B8 ,1,
    60), SUBSTRB(:B7 ,1,30), SUBSTRB(:B6 ,1,120), SUBSTRB(:B5 ,1,120),
    SUBSTRB(:B4 ,1,120), :B3 , :B2 , :B1 ) RETURNING LOG_SEQUENCE INTO :O0
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 20 0.00 0.03 4 1 304 20
    Fetch 0 0.00 0.00 0 0 0 0
    total 21 0.00 0.03 4 1 304 20
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173 (recursive depth: 1)
    Rows Row Source Operation
    1 LOAD TABLE CONVENTIONAL (cr=1 pr=4 pw=0 time=36498 us)
    1 SEQUENCE FND_LOG_MESSAGES_S (cr=0 pr=0 pw=0 time=24 us)
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    db file sequential read 4 0.01 0.03
    SELECT MESSAGE_TEXT, MESSAGE_NUMBER, TYPE, FND_LOG_SEVERITY, CATEGORY,
    SEVERITY
    FROM
    FND_NEW_MESSAGES M, FND_APPLICATION A WHERE :B3 = M.MESSAGE_NAME AND :B2 =
    M.LANGUAGE_CODE AND :B1 = A.APPLICATION_SHORT_NAME AND M.APPLICATION_ID =
    A.APPLICATION_ID
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 2 0.00 0.00 0 0 0 0
    Fetch 2 0.00 0.03 4 12 0 2
    total 5 0.00 0.03 4 12 0 2
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173 (recursive depth: 1)
    Rows Row Source Operation
    1 NESTED LOOPS (cr=6 pr=2 pw=0 time=15724 us cost=3 size=134 card=1)
    1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=20 us cost=1 size=9 card=1)
    1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
    1 TABLE ACCESS BY INDEX ROWID FND_NEW_MESSAGES (cr=4 pr=2 pw=0 time=15693 us cost=2 size=125 card=1)
    1 INDEX UNIQUE SCAN FND_NEW_MESSAGES_PK (cr=3 pr=1 pw=0 time=6386 us cost=1 size=0 card=1)(object id 34367)
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    db file sequential read 4 0.00 0.03
    DELETE FROM MO_GLOB_ORG_ACCESS_TMP
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.02 3 4 4 1
    Fetch 0 0.00 0.00 0 0 0 0
    total 2 0.00 0.02 3 4 4 1
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173 (recursive depth: 1)
    Rows Row Source Operation
    0 DELETE MO_GLOB_ORG_ACCESS_TMP (cr=4 pr=3 pw=0 time=29161 us)
    1 TABLE ACCESS FULL MO_GLOB_ORG_ACCESS_TMP (cr=3 pr=2 pw=0 time=18165 us cost=2 size=13 card=1)
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    db file sequential read 3 0.01 0.02
    SET TRANSACTION READ ONLY
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.01 0 0 0 0
    Fetch 0 0.00 0.00 0 0 0 0
    total 2 0.00 0.01 0 0 0 0
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    SQL*Net message to client 1 0.00 0.00
    SQL*Net message from client 1 0.00 0.00
    begin Fnd_Concurrent.Init_Request; end;
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 148 0 1
    Fetch 0 0.00 0.00 0 0 0 0
    total 2 0.00 0.00 0 148 0 1
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    log file sync 1 0.01 0.01
    SQL*Net message to client 1 0.00 0.00
    SQL*Net message from client 1 0.00 0.00
    declare X0rv BOOLEAN; begin X0rv := FND_INSTALLATION.GET(:APPL_ID,
    :DEP_APPL_ID, :STATUS, :INDUSTRY); :X0 := sys.diutil.bool_to_int(X0rv);
    end;
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 9 0 1
    Fetch 0 0.00 0.00 0 0 0 0
    total 2 0.00 0.00 0 9 0 1
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    SQL*Net message to client 8 0.00 0.00
    SQL*Net message from client 8 0.00 0.00
    begin fnd_global.bless_next_init('FND_PERMIT_0000');
    fnd_global.initialize(:session_id, :user_id, :resp_id, :resp_appl_id,
    :security_group_id, :site_id, :login_id, :conc_login_id, :prog_appl_id,
    :conc_program_id, :conc_request_id, :conc_priority_request, :form_id,
    :form_application_id, :conc_process_id, :conc_queue_id, :queue_appl_id,
    :server_id); fnd_profile.put('ORG_ID', :org_id);
    fnd_profile.put('MFG_ORGANIZATION_ID', :mfg_org_id);
    fnd_profile.put('MFG_CHART_OF_ACCOUNTS_ID', :coa);
    fnd_profile.put('APPS_MAINTENANCE_MODE', :amm); end;
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 8 0 1
    Fetch 0 0.00 0.00 0 0 0 0
    total 2 0.00 0.00 0 8 0 1
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    SQL*Net message to client 1 0.00 0.00
    SQL*Net message from client 1 0.00 0.00
    SELECT FPI.STATUS, FPI.INDUSTRY, FPI.PRODUCT_VERSION, FOU.ORACLE_USERNAME,
    FPI.TABLESPACE, FPI.INDEX_TABLESPACE, FPI.TEMPORARY_TABLESPACE,
    FPI.SIZING_FACTOR
    FROM
    FND_PRODUCT_INSTALLATIONS FPI, FND_ORACLE_USERID FOU, FND_APPLICATION FA
    WHERE FPI.APPLICATION_ID = FA.APPLICATION_ID AND FPI.ORACLE_ID =
    FOU.ORACLE_ID AND FA.APPLICATION_SHORT_NAME = :B1
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 0 0 0
    Fetch 2 0.00 0.00 0 7 0 1
    total 4 0.00 0.00 0 7 0 1
    Misses in library cache during parse: 1
    Misses in library cache during execute: 1
    Optimizer mode: ALL_ROWS
    Parsing user id: 173 (recursive depth: 1)
    Rows Row Source Operation
    1 NESTED LOOPS (cr=7 pr=0 pw=0 time=89 us)
    1 NESTED LOOPS (cr=6 pr=0 pw=0 time=93 us cost=4 size=76 card=1)
    1 NESTED LOOPS (cr=5 pr=0 pw=0 time=77 us cost=3 size=67 card=1)
    1 TABLE ACCESS BY INDEX ROWID FND_APPLICATION (cr=2 pr=0 pw=0 time=19 us cost=1 size=9 card=1)
    1 INDEX UNIQUE SCAN FND_APPLICATION_U3 (cr=1 pr=0 pw=0 time=9 us cost=0 size=0 card=1)(object id 33993)
    1 TABLE ACCESS BY INDEX ROWID FND_PRODUCT_INSTALLATIONS (cr=3 pr=0 pw=0 time=51 us cost=2 size=58 card=1)
    1 INDEX RANGE SCAN FND_PRODUCT_INSTALLATIONS_PK (cr=2 pr=0 pw=0 time=27 us cost=1 size=0 card=1)(object id 22583)
    1 INDEX UNIQUE SCAN FND_ORACLE_USERID_U1 (cr=1 pr=0 pw=0 time=7 us cost=0 size=0 card=1)(object id 22597)
    1 TABLE ACCESS BY INDEX ROWID FND_ORACLE_USERID (cr=1 pr=0 pw=0 time=7 us cost=1 size=9 card=1)
    SELECT P.PID, P.SPID, AUDSID, PROCESS, SUBSTR(USERENV('LANGUAGE'), INSTR(
    USERENV('LANGUAGE'), '.') + 1)
    FROM
    V$SESSION S, V$PROCESS P WHERE P.ADDR = S.PADDR AND S.AUDSID =
    USERENV('SESSIONID')
    call count cpu elapsed disk query current rows
    Parse 1 0.00 0.00 0 0 0 0
    Execute 1 0.00 0.00 0 0 0 0
    Fetch 1 0.00 0.00 0 0 0 1
    total 3 0.00 0.00 0 0 0 1
    Misses in library cache during parse: 0
    Optimizer mode: ALL_ROWS
    Parsing user id: 173 (recursive depth: 1)
    Rows Row Source Operation
    1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1883 us cost=1 size=108 card=2)
    1 HASH JOIN (cr=0 pr=0 pw=0 time=1869 us cost=1 size=100 card=2)
    1 NESTED LOOPS (cr=0 pr=0 pw=0 time=1059 us cost=0 size=58 card=2)
    182 FIXED TABLE FULL X$KSLWT (cr=0 pr=0 pw=0 time=285 us cost=0 size=1288 card=161)
    1 FIXED TABLE FIXED INDEX X$KSUSE (ind:1) (cr=0 pr=0 pw=0 time=617 us cost=0 size=21 card=1)
    181 FIXED TABLE FULL X$KSUPR (cr=0 pr=0 pw=0 time=187 us cost=0 size=10500 card=500)
    1 FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=4 us cost=0 size=4 card=1)
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    asynch descriptor resize 2 0.00 0.00
    OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
    call count cpu elapsed disk query current rows
    Parse 6 0.00 0.00 0 0 0 0
    Execute 6 0.01 0.02 0 165 0 4
    Fetch 1 0.00 0.00 0 0 0 1
    total 13 0.01 0.02 0 165 0 5
    Misses in library cache during parse: 0
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    SQL*Net message to client 37 0.00 0.00
    SQL*Net message from client 37 1.21 2.19
    log file sync 1 0.01 0.01
    OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
    call count cpu elapsed disk query current rows
    Parse 49 0.00 0.00 0 0 0 0
    Execute 89 0.01 0.07 7 38 336 24
    Fetch 29 0.00 0.09 15 168 0 27
    total 167 0.02 0.16 22 206 336 51
    Misses in library cache during parse: 3
    Misses in library cache during execute: 1
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    asynch descriptor resize 6 0.00 0.00
    db file sequential read 22 0.01 0.14
    48 user SQL statements in session.
    1 internal SQL statements in session.
    49 SQL statements in session.
    0 statements EXPLAINed in this session.
    Trace file compatibility: 10.01.00
    Sort options: prsela exeela fchela
    1 session in tracefile.
    48 user SQL statements in trace file.
    1 internal SQL statements in trace file.
    49 SQL statements in trace file.
    48 unique SQL statements in trace file.
    928 lines in trace file.
    1338833753 elapsed seconds in trace file.

  • Custom report sorting

    Custom report sorting
    I need to display the report column header in vertical format, hence I’ve to use to use some css code along with column name for that. Also, I want this column to be sorted by clicking the column name. So, I’m embedding the following url along with css and column name to enable sorting on this column when user clicks the column header. I got the following url by looking at the standard report with sorting enabled on a column.
    http://test.com:7777/pls/htmldb/f?p=100:22:&APP_SESSION:fsp_sort_1::RP&fsp_region_id=1870116795285540
    My questions are …
    How can I toggle the url to append “_desc” to the fsp_sort_1 parameter dynamically when the user clicks the column name, as it is done when standard column sorting is selected.?
    How can pass region id dynamically in the above url (last number in the url)?
    Any ideas are appreciated
    Thanks,
    Surya

    hi pavan
    i can just tell you that i had no issues with custom column sorting in webi with Enterprise XI 3.0 and Xcelsius 2008.
    Best Regards
    Ulrich

  • Custom report to disvover duplicate login name and computer

    Hi all,
    I need to create a custom report which shows a same login name use on many computer in ZAM 7.5.
    could you please help me to choose the good option on a custom report creation ?
    Thank all,
    Frnchtch

    Here's one method using the Custom reports console. Not the best mind you but quick to setup if you just need results on who the dups are.
    Go to Custom reports
    Select New Report (Type = Workstation; Focus = Basic workstation attributes)
    In column selection place "Login Name"
    In summary criteria select "Workstation Instances (Summary) > 1
    Save with a name like "Duplicate Logins
    Run report
    HTH,
    Bryant

  • Custom Report using S_ALR_87013611 & KSB1

    Hi SAP Experts,
    I need/customer wants summary report by Cost Element i.e
    SKFActual(SKF Qty)Cost CenterCostElementDollars+Report Currency.
    First 2 fields (SKF+Actual - SKF Qty) we got from S_ALR_87013611 report. Then we double clicked on SKF then it will take to KSB1 transaction code(as said by you) there we got the rest of the fields.
    Currently we are developing the same Custom Report but it should show by summary i.e by Cost Element.
    It should show in 1 report the above 6 fileds.
    Could you please tell me what Tables and Data types I need to refer?
    Thanks for your help in advace.
    Thanking you
    Regards,
    David Raj

    I am currently having a problem with this report and drilldown to KSB1, the cost centers selected int S_ALR_87013611 are not transferring to KSB1 and thus all the cost centers come up in the call to KSB1, are you experiencing this problem? I am on V4.7

Maybe you are looking for