Selecting less than a full word

Is it possible to get an AVDocGetPageText() callback with less than a full word of text? If I make the selection rectangle smaller than the full word using PDDocCreateTextSelect, it still scales up to the word boundary. I just wish to see the letters in the selection box, not the full word that ends outside of it.
Thanks
Simon

Napster and all the rest are just as bad. That's why it's such a dangerous thing to make assumptions here that other music download services work the same way as the iTMS.
What's really great about Microsoft's DRM is that when you have to reinstall Windows and then restore your licenses, it counts against you. Every time you do that (which can be often when you use Windows), it's one more computer authorization. I have a Rio Karma (gotta have gapless playback), and it came with a gift card for a free album from Napter. After a few rounds of trying out different Windows-Linux dual boot options, I ran out of authorizations (as though I'd changed computers) and can no longer play the files.
At least I learned enough about DRM with my "free" album to forever avoid actually paying for such content.

Similar Messages

After the recent download, my ipod space said that I had reached capacity. Before the upgrade, I was less than half full...why?

After the recent download, my ipod space said that I had reached capacity. Before the upgrade, I was less than half full...why?

***after the most recent UPDATE...

Photosmart 5520 showing new cartridges as less than half full

I've just replaced the three colour cartridges with genuine HP cartridges.
There are no printing problems, no error message, yet the Cyan and Blue cartridges are only showing less than half full. The yellow one is showing full.
I've tried all the steps on the trouble-shooting page here but no change.
Is there a solution?

Hi gordonbp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that the colour ink cartridges are not giving an accurate reading. I do have a couple troubleshooting steps that I would like to run through to see if we can get this issue resolved for you.
First off, if you have the printer power cable connected to a power bar/strip, please remove it and connect the power cable direct to a wall outlet. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. Please note that the printer that is listed in this document is a LaserJet printer and that this is only used as an example seeing that the power issue applies to HP products in general.
I would also suggest that you attempt to reset the printer once the power cable is in a wall outlet. Here is a document that explains how to do a basic Reset on the printer.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Restrict with variable: selection less than

Hi,
I want to restrict a characteristic against a variable, lets say, Current Fiscal Year. But I want the restriction to be "Less Than" currunt fiscal year and NOT "egual to."
It's an SAP Exit variable that I'm using, so I wana hardcode it to show "less than".
How do I achieve that?
Frank
Message was edited by: Frank

Hi:
For the variable type in query designer, select the Selection Options. Now, when you run the query, you will get to choose all the options inclufing what you want.
If you are not able to see these, create a new variable and make sure you select Type: Selection Options while creating the variable itself.
Ram Chamarty
Message was edited by: Ram Chamarthy

HBO movie selection less than Comcast

Ever since I switched from Comcast to Verizon, my wife and I have noticed that the number/selection of movies available via our HBO package is way down. We're trying to figure out if Verizon purchases a more limited HBO package than Comcast or if, coincident with our switch to Verizon, HBO cut back on the number of movies it offered. The selection offered on HBO On-Demand is similarly affected.
We don't watch that much TV, but feel like there's never anything new to watch on HBO.
Has anyone else noted the same change? Or, does anyone have an explanation?
Frustrated,
A-Man

I really appreciate the fact that HBO On Demand can be seen in HD. That was a major drawback when trying to cue up some HBO programming at will.
However, I noticed that what the HBO website says is currently running on demand is different than what we see is available through our Verizon set-top box. For instance, I went to look for Watchmen (which HBO is currently saying should be available through On Demand), but my FiOS TV says that only Jurassic Park and something else I didn't want to watch were available.
As an HBO subscriber, I feel that we should be getting exactly what HBO is putting out there. In fact, there's a lot of programming that HBO has made available through On Demand, but those options aren't there for FiOS.
After going through the proper customer support channels with Verizon, I'm just getting the standard runaround. "Call tech support", "call billing". I see where this is headed. Probalby to me switching to AT&T U-Verse or satellite. It's really sad when something as simple as trying to get what you paid for turns into a mountain.

Greater Than Less Than

Dear all,
I am Using oracle 10g R2 database on windows.
I have a doubt that,
If I have a 'Date' datatype column suppose a and want to (select Less than sysdate and greater than Sysdate-31(One Month).
e.i.
select a,b,c from T where a Less Than Sysdate-31(One month.);How can i do this.
Thanks,
Chanchal Wankhade.

Shinegar wrote:
I had not considered the effect on an index with TRUNC. Thank you for pointing that out.
TRUNC doesn't actually remove time as you can see below
SELECT TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH:MM:SS AM') "Today's Date and Time" from DUAL;
Today's Date and Time
01/19/2012 12:01:00 AMLet's say sysdate = Jan 19, 2012 11:00:00 AM
As shown above, trunc(sysdate) = Jan 19, 2012 12:01:00 AM
So, trunc(sysdate) -1 = Jan 18, 2012 12:01:00 AM
Removing the trunc from column a
select a,b,c
from T
where a between trunc(sysdate)-1 and trunc(sysdate);will also remove all data that is greater than Jan 19, 2012, 12:01:00 AM so you would only see data from one day -- Jan 18th.
Adding the trunc to column a returns all the data from Jan 18th and 19th.
It is my experience that users will ask for a date range, but then will ask for just one day. If Column a is not truncated, then no rows would be returned when between trunc(sysdate) and trunc(sysdate).
Most programmers will not use trunc(sysdate) in the where clause, but would use a variable with value assigned of sysdate or trunc(sysdate) as it provides more flexibility.
If you do not want to use trunc on column a, then the where clause should be BETWEEN trunc(sysdate) - 31 AND sysdate.
Edited by: Shinegar on Jan 19, 2012 12:40 PMThe trunc function does not remove the time portion, but it does set it to midnight. Or at least i would if you used the correct format mask in your TO_CHAR. The mask for minutes is MI not MM.
SQL> SELECT TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH:MI:SS AM') am_pm,
2 TO_CHAR(TRUNC(SYSDATE),'MM/DD/YYYY HH24:MI:SS') mil_time
3 from dual;
AM_PM MIL_TIME
01/19/2012 12:00:00 AM 01/19/2012 00:00:00John

Just Curious: Cropping Display for "Less than Ideal" Resolutions?

Hey there, its me again. This isn't a "life or death" type of thing, more just a "curiosity"; 'cuz I remember back when I had my classic hp zt1250, whenever the resolution was less than its full capabilities (1024X768), it would resize the input to the correct size, so for example if you were say, installing Windows (where the installer is only 640X480 or 800X600 or somethin' like that), instead of stretching it to the full screen and making it look crappy, it would box it in so that it would only take up those 800X600 or 640X480 pixels of the screen (in the end, you'd see a black box around the part of the screen where there was an image). On a laptop with such an awkward aspect ratio, it bugs me how the "Starting Windows" animation is stretched out (trivial, I know) because it is only in 1024X769 instead of the machine's native 1280X800 Resolution, so I was wondering if this is corrected in a BIOS update somewhere or if it was "Just another one of those oversights" on these fancy "Newish" laptops.
Thanks.
Dr Robinson

yigit wrote:
have you read installation instructions?
you may need to use dos to flash bios upgrade.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68504
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67975
please post type and windows that you are using ( 32/64 bit xp/vista/7 )
Maybe it was just me, but I couldn't find anything in the instructions for updating outside of WinPhlash.
?? http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/68et37ww.txt
It does say something about not functioning in 64 Bit Windows, so that may be our problem.
Dr Robinson

Is delta certification different than a full certification?

Hello experts,
I recently became certified on BW 3.5 and want to become certified on BI 7.0. I understand I can take the delta exam (40 questions) instead of the full BI 7.0 (80 questions). Do both certificatins (delta and full) have the same value? I received an e-mail from SAP stating that the delta has a shorter expiring period (lasts less). Where can I find such information? For how long does a certification lasts and does the delta certificaion lasts less than a full?
Thanks in advance,
Marcio

Thanks gents,
I know the concept of delta as just testing the new concepts, or differences from previous version. Sorry if I was not clear on my question. My doubt is more specifically on for how long each certification is valid. I understoof from SAP that the delta expires first, but I don't understand why and I can't see any info abou it on the websites.
Kind regards,
Marcio

My iPhoto doesnt allow me to place more photos, says that the space is full but my mac book pro is new (less than 2 weeks) and I only got 500 photos, what should I do?? the computer is almost empty

My iPhoto doesnt allow me to place more photos, says that the space is full but my mac book pro is new (less than 2 weeks) and I only got 500 photos, what should I do?? the computer is almost empty

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Is it possible to play a slideshow in less than full screen mode

running 10.9.4, latest version of iPhoto. Is there any way I can play a slideshow at less than full screen mode? Like maybe half or quarter screen instead of having the app take over the entire screen? Very irritating. If I could run a slideshow as just one of several apps open on the desktop. Any way to do that?

The slideshow will play inside the iPhoto viewer pane and not in full screen mode, if you use the "Preview" button and not the "Play" button.

Restrict the LONG RAW Column with less than 32760 bytes in the SELECT

When i am trying to access a LONG RAW Dataype wchich has characters greter than 32760 bytes i am getting this error.
Error -6502: ORA-06502: PL/SQL: numeric or value error
I came to know that PL/SQL will only be able to access the first 32760 bytes of a LONG RAW. If we try to fetch a LONG RAW from the database into PL/SQL variable which exceeds the 32760 byte limit then we encountered the above error.
Can anyone tell to avoid this error can we write a query to restrict the output to get only those records which has LONG RAW length less than 32760 bytes.
Since we canot use utl_raw.length() in the Select Statement, is there any function to restrict the the records for less than 32760 Bytes only for LONG RAW datatype, so that i will not get any records for more than 32760 bytes and we will not get this error.
REquest you to please help.

Hi
we do not have an option of migrating the LONG RAW to BLOB or any kind of ALTER to the table.
We want to restrict the use of Records from the Table which has data for LONG RAW column less than 32760 bytes, so that we will not get the PL/SQL numberic Error
any function for LONG RAW that can be used in SQL like for varchar2 we can use
select length(NAME) < 100 from tb_emp+
i.e it will get records only which has NAME less than 100 characters.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

Question
Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

Hi terrybohle1938,
Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
Hopefully this helps!

Homepage is full screen but all other pages 50% less than full screen

homepage full screen all other pages less than full screen

Yep, same problem for me. Only started happening two days ago.
BBC Homepage completely blank. No source code shows up either. Get the following response header (from Webdev toolbar):
Date: Thu, 12 Aug 2010 10:05:58 GMT
Server: Apache
Vary: Accept-Encoding
Content-Encoding: gzip
Content-Length: 20
Connection: close
Content-Type: text/html
500 Internal Server Error
I don't think I've added any new addons recently. And it only happens in Firefox, not IE or Chrome. And bizarrely, like the poster above any BBC subdomains are fine, like bbc.co.uk/sport, or /news.
I'm on a Windows XP PC, running FF 3.6.8. Very odd issue and seems very few people are having it going by Google search. But bizarre that, for all of those that do have the problem, it happened on Tuesday.
Any help 'ppreciated.
Rob

1 million row full table scan in less than one minute?

All,
a customer has a table which is around 1 million rows.
The table size is 300 Mo.
The customer wants to calculate regular arithmetic operations,
and synthetic data on the whole table. He will use 'group by'
statements and 'sort by'.
He wants to know if it would be possible to get the results in
less than one minute, and what would be the necessary
architecture in order to achieve this?
He currently has a 4 Gb Ram machine, 4 processors (I think...).
It's a 7.3 database.
Would an upgrade to 8i or 9i help? Would partitioning help?
Would parallel query help? What else?
There will be no other concurrent requests on the system.
Thanks!

Hi
If you have four processors parallel query will increase speed
of executing your statement. It will work better with
partitions. In version 7.3 is not very easy to manage partitons
because you have not partition tables - you have only partition
views. Maybe the speed is the same but management of partition
views is not so easy. So in version 8i and 9i it will be better.
If you have index for group by columns and they are 'NOT NULL'
it will be additional way of increasing speed beacause you will
eleminate sort operation.
Regards

Selecting less than a full word

Similar Messages

Maybe you are looking for