Selection is different on Mac vs PC?

Okay... bear with me here...
When I am at work on my PC and search the music store for "Classical Gas," for example, I get Pepe Featuring Bernd Schoenhart among the search results. When I try searching for "Classical Gas" at home on my Mac, that album doesn't appear. Also, there are results that show up at home (Mac) that don't appear at work (PC). What the heck is THAT all about?

Just tested the "Classical Gas" search and got the same result on Mac and Windows XP at the US store. 19 showed up in the results, including Pepe.
Maybe you got caught in a database upgrade or something... *shoulder shrug*

Similar Messages

How to avoid the user selecting a different path in my installer

Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-Joe

Ben64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe

BAPI_ALM_ORDERHEAD_GET_LIST to select two different order at a time (urgent

hello all ,
Using BAPI_ALM_ORDERHEAD_GET_LIST i want to select two different orders at a time . As we do in IW38 using select single vaules(1) .
i want to know how to pass the selection .
Up to know i have tried like this :
FIELD_NAME                     S OP LOW_VALUE
OPTIONS_FOR_ORDERID            I EQ 500460
OPTIONS_FOR_ORDERID            I EQ 500400
But i am getting only the first order . But i want both order numbers .
So please help me on this .
Thanks are regards ,
Prem

Just for information. The following IT_RANGES fields map to the IW38 checkboxes at the top of the selection-screen:
SHOW_DOCUMENTS_IN_PROCESS      IW38 - Outstanding (CRTD)
SHOW_OPEN_DOCUMENTS                  IW38 - In process (REL)
SHOW_COMPLETED_DOCUMENTS       IW38 - Completed (TECO and CLSD)
SHOW_HISTORICAL_DOCUMENTS       IW38 - Historical
If you want to select TECO/CLSD orders, then you would use the following in IT_RANGES:
SHOW_DOCUMENTS_IN_PROCESS      I EQ
SHOW_OPEN_DOCUMENTS                  I EQ
SHOW_COMPLETED_DOCUMENTS       I EQ X
SHOW_HISTORICAL_DOCUMENTS       I EQ
As you then said, you need to filter out the CLSD statuses using:
OPTIONS_FOR_STATUS_INCLUSIVE I EQ TECO
I suspect this would be a more efficient way of selecting the data, but you'd need to check.
PeteA

How to do a SELECT from different tables into an internal table?

How to do a SELECT from different tables into an internal table?
I want to select data from MARA, MARC and ZPERSON and populate my ITAB_FINAL
REPORT zinternal_table.
TABLES:
mara,
marc,
zperson.
TYPES:
BEGIN OF str_table1,
v_name LIKE zperson-zname,
v_matnr LIKE marc-matnr,
v_emarc LIKE marc-emarc,
v_werks_d LIKE marc-werks_d,
v_dstat LIKE marc-dstat,
END OF str_table,
i_table1 TYPE STANDARD TABLE OF str_table1.
DATA:
BEGIN OF str_table2,
v_mandt LIKE mara-mandt,
v_ernam LIKE mara-ernam,
v_laeda LIKE mara-laeda,
END OF str_table2,
itab_final LIKE STANDARD TABLE OF str_table2.

first find the link between mara , marc and zperson , if u have link to 3 tables then u can jus write a join and populate the table u want ( thats final table with all the fields).
u defenitely have alink between mara and marc so join them and retrieve all data into one internal table.
then for all the entries in that internal table retrieve data from zperson into another internal table.
then loop at one internal table
read another internal table where key equals in both the tables.
finally assign fileds if sy-subrc = 0.
gs_finaltable-matnr = gs_table-matnr
etc...
and finally append gs_finaltable to gt_finaltable.
there u go ur final table has all the data u want.
regards
Edited by: BrightSide on Apr 2, 2009 3:49 PM

"Try Selecting a Different Printer or File Type" Error - iPad2 - Officejet Pro 8600 - ePrint error

Greetings...
I just got an Officejet Pro 8600 and I've been trying to get web pages to print using HP ePrint from my iPad 2 (iOS 7.0.6). I go into the ePrint app, go to web page of choice, and then click on my printer option to print. It renders on screen and then throws out the following error:
"Try Selecting a Different Printer or File Type" "Officejet Pro 8600 [5124FC] doesn't support this file type."
I can use ePrint from the iPad to print pictures from camera roll.
This only is problematic when I try to print web pages (I tried amazon.com for test).
I have no problems doing this from my iPhone...only the iPad.
I've tried rebooting device and trying again....same thing.
Anybody know how to fix this? I really want to be able to print web pages from my iPad.
Thanks in advance...
Possie

Hello Possie,
Thank you for the update. I have to say I'm surprised and disappointed that the uninstall and reinstall did not resolve the issue, especially since you can print the page from your iPhone.
I have spent some time researching this and working with my colleagues in HP's Cloud Services and we have a couple of suggestions/questions.
Do you get the same error when you try to print the web page using Apple's AirPrint feature?
Please ensure the iPad is connect to your home wireless network and try to print again.
Please try changing the settings in the ePrint app before printing the web page. Please ensure that the paper quality is set to normal (see screen shot below) and that the paper size is set to letter (see 2nd screen shot below).
Please let us know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Using Teststand, need to know how to select a different active x servers in the labview adapter configuration...

Hi,
When I open TestStand using a seq. file, I can see all the VI's that are called, but when I try to open them for editing, I see this message;
"The labview adapter is currently configured to run tests in an environment that does not support editing VI's. In order to edit or create VI's, you must select a different labview Active X server in the lab view adapter environment"
So, I clicked on all the options allowed to me in the "Module Adapter" (is this the same as the drop down menu (by default)"Labview Standard Prototype adapters") but I was still unable to open the VI�s for editing�
Anyone know how or why?

Hi,
You will find the option under Configure | Adapters...then select the labview and press the configure button.
So if you are not able to do this then it could be because your system doesn't have the LabVIEW development system or you do not have adminstrator rights (Teststand login) or it could be that your VI's have been saved without diagrams.
What are you logged in as?
Do you know if you have labVIEW?
Regards
Ray Farmer

CS5 install on case-sensitive file system - can't choose different drive (Mac OS)

I just upgraded my macbook pro to a new drive and 10.6, and chose 'case sensitive' HFSX, 'cause I'm a heavy command line user and wanted the maximum BASH experience.
I'm trying to install the CS5 demo to try some web design tools, and the installer immediately says "Installation to case-sensitive drives is not supported. Please choose a different drive location to install." So case-sensitive drives aren't supported; crappy but fair enough.
The error message leads me to think that I can just choose a non-case-sensitive drive to install to, but I never get a chance to pick one - I click on the installer and it goes straight to the error message.
So - how do I pick a different drive to install to? Am I just an idoit, is there no way to select a different drive, or will it not install on a system that even BOOTS from a c.s. drive, regardless of the format of the drive that CS5 is installed to?
I called the support number, and the poor fellow on the other end suggested I re-download the demo, and if the new download fails call Apple support to report my 'drive error'.
I'm hoping to avoid an entire backup-reformat-restore and lose CLI compatibility just to try some demo software.
ch

That is part of why I would prefer case sensitive by default.   I know some server packages do the folding for you, same as some web servers do not differentiate between 'htm' and 'html' when people type in requests, but most of the time the backend server is going to be case sensitive and it is not safe to assume (or hope) that the service will fix things. Compensating for mistakes is fine, but allowing such silent corruption is not a terribly laudable things and it encourage people be careless.
Every once in a while I do encounter someone submitting some work where their configuration values and file names do not match, and 'well my laptop silently fixes it for me since it does not care' is a poor excuse. And if I sent broken filenames upstream or even worse commit them to be used on a server, that is a pretty significant professional failure.
Back to Adobe specifically, I have been trying the suggestion on poster mentioned in where one installs the Adobe applications to a case insensitive drive then copy over the installed files. This does not quite work out of the box, but for reasons I would be hard pressed to believe are Apple's fault.
For instance the first error I encounter is the inability of Bridge to load:
"@executable_path/../Frameworks/WRServices.framework/Versions/A/WRServices"
When I go look inside the app directories I can see that in Bridge the file has been named 'awrservices', but in Illustrator it is correctly named AWRServices.   So it looks more like a problem in whatever version control they are using. The only way I can picture (which my adminitialy limited knowledge of what I am sure is a large and complex project with all sorts of legacy issues) that the installer toolchain factors in as a problem is if they have mismatches in their own scripts/packaging and have been depending on HFS's bad behavior to hide the problem. I can understand not wanting to invest the time to pay down the technical debt on such an issue, but having such errors in your configuration causes long term headaches.
And I say this as someone who worked on just such a project, moving a software suite that had legacy code stretching back longer than Adobe has existed as a company. This conversion included moving from a case insenstive filesystem to a case sensitive one and yeah, there were lots of problems that the old FAT32 system hid from us, but it really paid off over the long run to fix them rather than try to twist the code to compensate.
Having said that, if the problem is really that they do not want to go update their filenames (in version control or config files), then you can always add folding to your loaders. I have had to do that a few times due to upstream people developing on case insensitive systems and sending data files with incorrect file names. This is an old class of problem, and while I can empathize with the struggles project managers have trying to get approval for paying down technical debt, the problem never gets better on its own and usually gets worse.
Which is why I responded with so much grump to the 'I never needed it' argument since that is exactly the type of customer comment that marketing tends to point to in order to push such things off the schedule. This is the type of thing where the customer does not really know what they want because they are already accustomed to broken behavior and most of the problems are hidden from their immediate view. It is easy to cover up the limitations since modern UI (and their search capabilities) can handle this.
It is not just arcane developers stuff, and it is the same transition that people have made with things like spaces, quotes, and parentheses, where years ago users believed they had no need for them since they were not using them, but they were only not using them because they did not work.   Today try to tell a modern user they can not put (, ", ) or even ' ' in their filenames and they would rightly question why this piece of obvious functionality is not working since today they are used to it working and no longer automatically compensate for it.
I also find it ironic that by default OSX hides a number of file extensions, so from the user's perspective you can have multiple files with the exact same name displayed to them, so you can get display issues where 'foo' is the same as 'foO' if both have .txt, but 'foo' and 'foO' are not the same if one has .txt while the other is .pdf. Add to this confusion cases like 'foo.txt' and 'foo.pdf" both being shortened to 'foo'.

Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one

HI,
You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

How to select a different country in ESS Address information

in ESS Personal Information Address iView, our employees need to be able to maintain foreign addresses and select from differenet countries in the country drop down.
We performed the IMG customization step "Personnel Management->Employee Self Services->Service Specific Settings->Own Data->Foreig Address Setting->Determine countries for foreign address and make settings." And we are using the Address iView located under the International PCD folder.
however, when we log in to ESS, the country screen field of the Address iView is read-only, employees cannot select a different country than their own. Anything I am doing wrong?
Regards,
Tiberiu.

Let me mention how this works
"Employees can maintain a foreign address using the country field on the
Edit screen. This is enabled if an employee creates a new record. When
an employee selects a foreign country in which to maintain an address,
the country-specific views (Edit view, Review view) change to correspond
to that country. If a country-specific address format does not exist for
the selected country, international address views are used.
Remark: Employees cannot change the country for an existing address!
Maintenance of foreign addresses is only allowed in case a new address
is entered or address changes are made for the same country."
Also make sure business function is enabled by SFW5 HCM_ESS_CI_1
VIEKN is availlable in Pa0003
ensure this is maintained T7XSSPERFORADD as well

This purchase could not be completed please select a different payment method

I`ve bought a new BB as a present to my wife - Z3.
I`ve registered for her new BB ID account - **Removed**@dunaeva.su
And we can not purchase anything having the same problem using all of our cards - "this purchase could not be completed please select a different payment method",
I`ve read a lot of forums and web pages and belive that our problem - ur sistem has flagged her account as potentially Fraudulent or Blocked.
U shold unblock her and bring ur appoligise.
Edit: Email removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

I apologize for the rudeness of my first post - i was really disappointed with the situation when i`m not able to provide to my wife fully equipped phone with all her contacts and sms (need some paid app). I`ll check up your recommendations and come back with a report or new questions.

How to make tabs show up selectively in different pages?

Hi,
I'm new to APEX and getting my hands dirty now...
I have a standard Tab Set called "TS1", which has 2 tabs (say, tab1 and tab2) in there. Since tabs are under "shared component", so it appears that they are shared throughout all the 10 pages I have.
How can I make the tabs show up selectively in different pages? For example, I want tab1 and tab2 showing up in page1-9, but NOT in page10. There's a "conditions" (Condition Type), but it has many types and I don't know how to use it.
Please kindly help!
Thanks much,
Helen

I have a similar requirement. I have several tabs (Operations, Maintenance, Safety, etc.) and users get individually assigned rights. I have a table where I have all the users listed and I added one column for each tab so I can set whether or not that user has access to that tab. You could go the same thing with groups if you want.
Basically, my table looks like this:
USER_ID, USER_NM, PWD_HASH, SAFETY_TAB, MAINT_TAB, OPER_TAB, etc.
where each of the _TAB fields is set up as a VARCHAR2(2) for just Y/N.
On my home page, I assign an APPLICATION_ITEM called G_USER_ID (Global User ID) on login so I can track who it is. Then I set the condition statement on the tab to SQL QUERY RETURNS AT LEAST ONE ROW
using the following query:
select SAFETY_TAB from APEX_USERS
where SAFETY_TAB = 'Y'
and USER_ID = :G_USER_IDThis example would be for the Safety tab, but you can easily substitute others. It works pretty slick.

Photoshop CC - Cannot control + click to select a different shape while using the pen tool?

I used the pen tool constantly in photoshop cs6 and would often use control + left click to select a different shape while still using the pen tool.
I'm now forced to switch to the move tool to select another layer? Why was this feature removed / changed?
Fix: After fooling around more, here is how I fixed it:
The new Direct Select Tool by default is set to "active" layers. Switch it to "all layers"
Message was edited by: Joe Horan

A new problem = Selecting multiple points with control + click + drag is selecting ALL shape layers... Jesus christ, why was this changed????
I now have to double click the shape I want to select? Why? What is the point of this?

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

Versions of Muse different between Mac and Windows

Me and a friend wanted to test Adobe Muse and we installed the 30 days trial version. I did it on my Mac. My friend on his Windows PC. I've tried Muse and when I wanted to show what I did to my friend, I went to him with the .muse file on a USB stick. We where very surprised that the Muse on the Windows PC couldn't open the file I've made on my Mac due to versioning problems. We compared the Muse versions and ... they are different (on Mac: 2014.2.0.569, CL 787027; on Windows: V 7.4 build 30, CL 784238). This is a problem since we wanted to develop both on the same site, of course not at the same time, but by passing the .muse file to one another.
Is this normal that versions between platforms are not in sync?
Thanks for answering!
Marc Verschueren.

Hi Marc,
The version of Muse in the windows machine of your friend is not the latest release, this could be because of previous installation or the technical specification of the windows machine is not met.
Please verify the system requirement for windows for CC 2014 release :
http://helpx.adobe.com/muse/system-requirements.html#Muse CC system requirements
Regards,
Akshay

I plugged my phone into my a different computer (mac) that was not mine and it asked me to restore the phone. I started to back up the phone, then ended the phone got unplugged in the middle of the backup. Now we can't find where the iPhone backed up.

I plugged my phone into my a different computer (mac) that was not mine and it asked me to restore the phone. I started to back up the phone, then ended the phone got unplugged in the middle of the backup. Now we can't find where the iPhone backed up.

If it there is a backup you will find in in ~/Library/Application Support/MobileSync/Backup. (Just open Finder>Go>Go To Folder..., past this in the path box and click Go.)

Selection is different on Mac vs PC?

Similar Messages

Maybe you are looking for