Selection on Global Calculated Key Figure problem

Hi all,
I've got a Calculated key figure, made up of 2 key figures and 2 restricted key figures, saved to a homogenous multiprovider (Customer Sales). this works fine as is.
However, when you create a selection in BEx QD, that limits the CKF further by Distribution channel, and view the result, the result seems to be multiplied by a value to the effect of 2.8???
If you view the CKF by itself its fine (though not limited to what it needs to be).
As an example.
Say sales for a distribution channel was 1 million dollars. Sales overall was 2 million dollars. If i drag in my CKF (and have NO characteristics), it comes up with 2 million dollars.
If i limit it to 1 sales office, no issues, I get that sales office's value. However, if i limit it to a distribution channel, i get roughly 2.8 million dollars.
Any ideas? I can't see the logic in this. Perhaps someone knows of the issue/has seen a note or something regarding this, cos its got me scratchin my head?
Cheers

Hi Pierre,
I appreciate the fast reply. This thing is driving me nuts!
Ok so when you refer to the CKF are you referring to the global CKF on the multiprovider or the CKF i have on the report that is restricted (basically a local RKF)?
I've had a look through there and have found the calculation tab, but can't really say i've found "Calculate according to current formula".
What i see are:
a dropdown list headed "calculate results as..." (nothing defined)
another dropdown list called "calculate Single Values as..." (nothing defined)
a tick box called cumulated (unticked)
another tickbox called "also apply to results" (unticked)
another dropdown listbox called "calculation direction" (default setting)
Underneath all that is a tickbox called "use precalculated value" (unticked).
is it something under all that that i need to change?
Do i change the global CKF or the local RKF?
Thanks for the assist.

Similar Messages

Global calculated key figures and their descriptions

Hi, I currently have a strange problem concerning calculated key figures.
We have several global calculated key figures which are used in approx. 100 querys. These key figures have a custom description ( not the same as the underlying keyfig info object).
When we use the calc. key figures in querys we let them take the description from the global key figure (the box 'use Standard text' is checked). When we execute the query, the description of the calculated does not show. As soon as we uncheck the box 'use Standard text' (and thus use 'local' -query level- descriptions) the description does show. Offcourse this is not a solution but merely a workaround, we want the key fig to take its description from the global key figure.
The problem as described above only occures on one of the two development environments. The environment on which the problem occures has support package skw70018(nwv st 16), the environment on which the problem <u>doesn't</u> occure has support package skw70013.

Execute the content at Infoprovider level as below
Div Team A B C
A X 2 1 6 9
A Y 4 2 9 15
Result Row 6 3 15
If you get same desired result in Infoprovider .. it should come in Report ... Run the report in RSRT (Without cache)
How you built the MP based on single cube or 2 ? Display content in MP for above critieria ... to cross check the report
check the idenfication ... is marked to which cube ?

Error When creating a new Global Calculated Key Figure or RKF

Hi,
Coming across this problem with NW2004s BI 7 query designer. When i create a new CKF or RKF with the query designer, i get a error message.
Currently the SAP GUI is on SP 8 and the problem exists after applying the collective note recently released.
Rgds
Dinesh
Message was edited by: Dinesh Mukundu

Also, make sure you've got all your frontend patches configured correctly as outlined here:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Problem in Calculated Key Figure in BEx 7.0

Hi All,
In Bex 7.0
We have a requirement where we need to display a key figure which is having unit price of an Article. In our InfoProvider we have Article, Store and Date and the report is based on Article. As we have to display only the latest price we have created a RKF by putting a restrcition of the latest date in the date range on the the unit price key figure. But still unit price is getting aggregated over stores.
For example if there are 10 stores and the unit price of an article is 5, then data displayed is 50 and not 5.
We tried to create a Calculated Key Figure using the above RKF and an exception aggregation Average of all detailed value that are not zero, null or error on reference characteristic 0PLANT. Its working fine when the query is restricted to one or two Articles. But for all the articles it gives the following error messages.
1. Error while reading data; navigation is possible.
2. Error occurred during parallel processing of query 17; RC3
3. Error executing physical plan: AttributeEngine: no 6952
4. Error reading the data of infoprovider ZXMSC01$X
5. Amount of data that is to be read from the BIA server is too large
6. The following error 6952 occurred in BIA server
7. Error executing physical plan: AttributeEngine: not enough memory;BwPopMerge pop1(setIsLastMerge(1)),in executor::Executor in cube: p03_zxmsc01
Can anyone tell me the solution for the above error. Or if there is a workaround to our requirement.
Regards,
Sachin

Hi,
Could be a memory issue.
One of your cube in on BIA which is causing the Problem.
So executing the query in RSRT by selecting Do not use BIA index option.
If the query is executed with out any issue then take the cube out of BIA and push it back.
Hope it helps.
Regards,
Raghu
P.S : Also please let us know if this query is live and it is an issue that you are facing after executing it properly for few days.
Or this is a new query created and testing now and in the process got this error?
Edited by: Raghu tej harish reddy on Sep 24, 2009 5:53 AM

Currency translation problem for calculated key figure

Hi All
I have a problem with the currency translation for a calculated key figure.
I have a requirement to show the MM consignment stock value in the specified currency from the selection screen.
For consignment stock, there is no value maintained in the system. So for this we need to calculate the value as below
Restricted key figure: RKFConsignment stock: Total stock with special stock indicator restriction "K"
Calculated keyfigure: Consignment stock value = Nodim( RKFConsignment stock) * (Standard cost / price unit).
Here, in the calculated keyfigure properties --> I have used a currency translation for the 0CALMONTH.
The query has selection on the 0calmonth.
But in the result the I am getting unexpected results.
Do we have any inconsistencies in the currency translation on the formulas?
Please help me on this.
Regards
S.R

Hi All
I have noticed something. I changed my query date selection to Calendar day - Keydate instead of calendar month.
And I have changed the currency variable to fixed exchange rate "CHF", it is working fine.
I think I have some problem with the currency translation variable.
Could anyone of you please send me the currency translation variable for Calendar month with the below parameters
exch rate type : M
Time reference : 0CALMONTH
End of month
Target currency for a variable : < var created on 0currency>
For my report, i need calendar month selection, currency selection.
Please help me with your ideas.
Thank you
Regards
S.R

Problems in using a calculated key figure in the Clustering Model

We have a problem in using a calculated key figure in the clustering model. With the limitation of the standard, in the Field tab, each calculated key figure cannot be selected from the selection screen directly. According to the SAP help, we have to use a dummy infoobject for a calculated key figure.
Are there any other ways to use a calculated key figure without using a dummy infoojbect?

Hi,
Make use of aggragation property of the keyfigure, for summing the values of that KF.
Regards,
Rajkandula

Problem saving queries with calculated key figures

Hello Experts,
I am analyzing this problem since many hours during the last weeks and I don't know, what else to do.
The problem is saving a key user query containing a calculated key figure in the production system (BW 3.5 SP SAPKW35015). The Error 'The query could not be saved due to a problem in transport' occures.
If I exclude the KF from the query, saving is possible, so the calculated KF must be the source of the problem.
The system is set to not changeable, but the 'Object Changeability' of 'Query Elements' in 'RSA1' --> 'Transport Connection' is set to 'Changeable Original'. If I set this option to 'Everything changeable', saving of the query works, but this is not possible in production, because transported standard queries would also be changeable.
For saving queries, die authorization object S_RS_COMP and S_RS_COMP1 is included completely with *, but this does not help.
I also transported the query and the KF again from development system ... no change, same problem.
I found the SAP note 533413, but what does this mean? "This problem can only be solved in the next BW release ..." I heard from colleagues, that BW 7.0 has the same problems.
Does anyone have an idea, how to solve this problem?
I would be very thankful for any reply...
Hannes
Edited by: Hannes Heidrich on Jun 23, 2008 12:07 PM

Thank you for your answer, but I have set the Object Changeability to Everything Changeable and restricted the user with S_RS_COMP. So only certain query names can be used and changed. Experiences from collegues said, that deleting and transporting again would not help.
Best Regards,
Hannes

Problems with Calculated Key Figure in Bex

One of our super users have copied a query and trying to do some changes in the new query. In the Query designer, the person was directly dragging a Calculated Key Figure from the left hand side panel into columns and trying to change its properties (Currency conversion key is changed from 'Nothing Defined' to 'Monthly average rate' with variable entry.
Then we get the error 'Abort system error in program and form SET_TCUR-02-' without even getting the variable popup window.
Also when we check the Query properties, we observed that one variable entry (which is displayed in the target currency field in the properties) is displayed twice and came to know that this is the reason for the error.
But why is that displaying twice there? Is there anything wrong in the way we had created the CKF? Do you have any document on how to use CKFs and RKFs?

Check here:
http://help.sap.com/saphelp_nw04/helpdata/EN/13/e072abaddb574284d22361f0b824bf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/6f/56853c08c7aa11e10000000a11405a/content.htm
For Currency Translation "How to:, see here:
http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
Thanks..
Shambhu

Calculated Key Figures question

Hi
In a Purchase Order report I have included a Calculated Key Figures and this report is transported to the QA environment.
Then I create another report using the same Calculated Key Figures but when I tried to save the query it gives me an error;
"The query could not be saved due to a problem in transport"
"BEx transport request 'BD1K900664' is not suitable or not available".
I was told that when the 1st report uses that Calculated Key Figures and the report transported over to the QA I cannot reuse the same Calculated Key Figures in the new report. Is this true in SAP BI? If so how can I reuse the same Calculated Key Figures in a new report.

Hello Lai,
Once you have transported the earlier report along with the original calculated key figure, create one more request by selecting just the cal. key figure which you want to use.
dont release this request.
Now any change you make in the cal. key figure will be stored in this newly created request.
also go ahead and create a new query using this ckf and save it in the newly created request.
Then you can always release this and transport the same.
hope this helps..
let me know for any further issues...
thanks,

Calculated key figures from multicubes before aggregation

Hi,
I am calculating a total using a calculated key figure
that has one key figure from a multicube and two other key figures from another multicube.
Also I factor the total using a variable with a replacement path on the dummy attribute (Constant) to "force" the calculation at the material level.
Cost = Cost(CUBE1) / Quantity(CUBE1) * Quantity(Cube2) * ZVRMATER1
Problem:
If I split the calculation this works before aggregation at the material level. Also this works fine using calculations that use key figures that must be calculated before aggregation if they all are from the same cube at the time. The required formula above will not work (zero divide) since during selection the OLAP processor retrieves in phases and with value 0 from the key figure of CUBE2.
Any suggestion on how to solve this without new back-end development?
Thanks.

Hi,
I am calculating a total using a calculated key figure
that has one key figure from a multicube and two other key figures from another multicube.
Also I factor the total using a variable with a replacement path on the dummy attribute (Constant) to "force" the calculation at the material level.
Cost = Cost(CUBE1) / Quantity(CUBE1) * Quantity(Cube2) * ZVRMATER1
Problem:
If I split the calculation this works before aggregation at the material level. Also this works fine using calculations that use key figures that must be calculated before aggregation if they all are from the same cube at the time. The required formula above will not work (zero divide) since during selection the OLAP processor retrieves in phases and with value 0 from the key figure of CUBE2.
Any suggestion on how to solve this without new back-end development?
Thanks.

Calculated key figures Vs local formula

HI,
I am having 4 queries on a cube.
i am now using calculated key figures instead of local formulae.
I want to know "which is better in performance wise/ or may be pros and cons of using each one."
Can any one clarify me.
I know that
1.when we select the option Calculation after aggregation will improve performance.
2.we can do some more things only with Cal. Key Figs using formula variable.
Here my concern is not that.
I am concerned about general case like -
i have to add, multiply or divide some direct key figures and use some data functions like nodim, NDIV0 functions.
Thanks in advance.
Regards,
Raghu

Hi Raghu,
Formulas cannot be directly reused, but if they are saved to a global structure, then the structure may be reused. If you are creating a calculation that will be widely used, it is best to create it as global...this helps a lot when you need to revisit the definition, and make changes as one chnage is reflected in all queries.
However, there are some functions like SUMCT, SUMGT, SUMRT, %CT, %GT, %RT which are available only to the formulas (local), so if you need to use them, you cannot use a CKF.
In addition to the differences, A formula can only work on other formulas/selections already in your query (in the same structure as your new formula), while a calculated key figure can only work on other key figures, calculated key figures or restricted key figures. However both can use formula variables.
CKF are calculated at the time of loading data.
Your Formula calculates at the time of running the query.
Hope this helps...
Regards,
Yokesh.

Calculated Key Figures Decimal Place Error

Hi Experts,
Wonder if there is anybody to help me out to explain why I am having a problem on the calculated key figures decimal places when if I report on the components of the calculated key figure (restricted key figure) are working correctly?
The calculated key figure is a boolean formula made up of 2 restricted key figures. The 2 restricted key figure are having 2 decimal place (one is 0.36 another is 0.00). In the current condition, the 2 restricted key figure just sums up - 0.36 + 0.00 = 0.36. However the calculated key figure displayed as 0.359999 (6 decimal places) as the result.
I am using BEx Analyzer Excel.

Hi Fang,
right mouse click on your KF and select properties. Then define the number of decimal places you want.
Ciao.
Riccardo.

Diff between Calculated key figure and new formula 6extra functions why

Hi Friends
In BEx query designer we have Restricted key figure & Calculated key figure. In the case of Ristricted Key figure And new selection the difference is Global and local.
But if we come to Calculated Key figure and New Formula the difference is same global and local. But in New formula we have 6 extra function. My question is does is there any certain reason for this or SAP AG not be able to develop those functions
Thganks & Regards
Bramhanand

Hi Surendra thank you for your reply.
But i am not asking difference between calculated key figure and New formula.
What i am asking is in the case of Restricted Key figure And new selection the difference is Global and local.
But in Calculated Key figure and New Formula the difference is same global and local and in New formula we have 6 extra function. My question is does is there any certain reason for this.Why not SAP AG is not included the new formula functions in Calculated key figure.
Thanks & Regards
Bramhanand

Exception Aggregation for a Calculated Key Figure in a Structure

Hello BI world,
Please can someone tell me if it is technically possible to use "exception aggregation (count) in a calculated key figure within a structure.
The definition of the structure is:
Rows: Characteristic (Selection) = Problem type (0CATCODE_FE) = "AF01"
Colums (Selections) Month 1 , Month 2, Month 3, etc .. Total
             Details of the selection for each month
                       0CALMONTH = Variable (offset+1 for Month 2 , 3 etc)
                               1KYFNM = CKF
Calculated Key Figure (CKF) =
                   General Tab: = Key Figure "0CAUSE_CNT"
                   Aggregation Tab - Exception Aggregation = Count All Values
                                             Ref Characteristic = Problem type (0CATCODE_FE)
                                                Calculation After Aggregation = not ticked
                   Local Calculations Tab = All "Nothing Defined"
What I am trying to achieve is the "count" of "Category codes" for each month specified in the structure.
I have looked in the cube and there should be a "category Code" count of "9" for Jan 2008 for notifcation type AF01 but the query shows 0?
Thanks in advance, points will be awarded.
Steve

Still not working? Not sure why? Have tried both answers and just not counting...
Is there any restrictions on using "exception aggregation" in a calculated key figures in a structure?
The structure is in the columns and it is a selection that includes the CKF with the exception aggregation plus a restriction on calendar month using a variable?
Any help greatly appreciated.
Thanks in advance.
Steve

Error when Using a Calculated Key Figure

Hi,
I am having a problem using calculated key figures (CKF's). I am not getting any errors
when i am creating them but when i pull the same into the report it is giving an error
SUB FORMULA not available. Can you please advise how to fix this issue.
Thanks
Rashmi.

Hello Rashmi,
thius is a known issue. The procedure from note 1238872 can be useful:
Download the BI 7.0 front-end add-on for SAP GUI 7.10, Support Package
700 from the SAP Service Marketplace.
Then save the calculated key figures in the InfoProvider (left-hand side
in the Query Designer):
    o Select the calculated key figures in the InfoProvider.
    o Save the calculated key figures using the context menu
    o or in the properties of the calculated key figures (right-hand
       side in the Query Designer).
    o If other calculated key figures are used in a calculated key
       figure, save them as described above.
    o For safety reasons, also save the query definition.
If the calculated key figure was saved correctly, the system does not
issue any error messages when you check the query definition (by
choosing "Menu -> Query -> Check").
Cheers,
Ricardo

Selection on Global Calculated Key Figure problem

Similar Messages

Maybe you are looking for