Selection Screen in Screens

Hi,
I am using Selection screen as a subscreen in a screen.The selection screen is having few parameters and a push button with function code.
So how can i (to execute few statements by finding the function code) capturing the function code by the user action on the push button of selection screen.
with rgds,
Anil.P

Hi John,
I want to use selection screen as sub screen .
I defined selection screen in the pbo of a screen , and called selection screen as subscreen in that pbo only.so how can i capture the event triggered by the push button of selection screen.In the PAI events of the sceen, i checked the field sy-ucomm , but it is not doing the work i defined for this event, if the condition on the sy-ucomm is satisfied.
so is it possible to findout whether the user has selected the push button of selection screen, which is defined as sub screen in a acreen.
with rgds,
Anil

Similar Messages

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need t

My Photoshop CS 5 has some strange actions when I copy a portion of a photo using the clone stamp to transfer to another part of the image. It carries the entire layer (not just the stamps selection) across the screen and I cannot place it where I need to. It appears as if I selected the entire layer on purpose (which I did not)
The below items appeared when I opened Photoshop CS 5:
“Photoshop has encountered a problem with the display driver and has temporarily disabled G & U enhancements. Check the video card malfunctions website for latest software. GPU enhancements can be enabled in the performance panel of preferences.”
(I believe this started after the automatically updated Windows was applied. It was coincident with the before mentioned problem . . . but I don’t really know if it had anything to do with it. )

For the Clone Stamp problem, check the Clone Source panel and Clipped is probably unchecked.
If so, check Clipped and see if that makes a difference.
(Window>Clone Source)
As to the video card problem:
Which version of windows are you using?
What is the make and model of your graphics card?
Do you know which update windows installed?

If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

Question
If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
Screen 2/3 blanco on the left side
With F11 all OK.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

SELECT-OPTIONS in Screen

Hi,
I am trying to create select - options in Screen , i.e. not the selection screen but a custom screen, say 9000. I can make the text boxes etc for having the select options. But How do I simulate the button wchich comes after select options. It would be used in dialogue programming with multiple screens having different reports.
Please reply to me urgently,
Thanks and Regards
Arnab Panigrahi

A few dot points:
1. You can have a select-option embedded in a dynpro, if you want, by using a subscreen. There's an example bit of code at
Module - pool Question..?
This would be easy to adapt to being a popup rather than a full screen if required.
2. As noted above, you can code your own select-options as in
Making a referenced field a range?
which I think Sesh has quoted from.
3. For the requirement you expressed initially, the code below should do the trick... you get a different block of extra selections depending on which radionbutton you select.
Jonathan
report zlocal_jc_radiobutton_hiding.
tables:
sscrfields.           "To allow trapping of Fcode on selection screen
selection-screen begin of block tot with frame.
parameters :
p_rb_01          radiobutton group rbg1 user-command zrb1 default 'X',
p_rb_02          radiobutton group rbg1.
selection-screen begin of block block1 with frame title text1.
parameters:
p_date                like sy-datum modif id bl1.
selection-screen end of block block1.
selection-screen begin of block block2 with frame title text2.
parameters:
p_time                like sy-uzeit modif id bl2.
selection-screen end of block block2.
selection-screen end of block tot.
*" Events:
initialization.
text1 = 'Enter a date'.
text2 = 'Enter a time'.
at selection-screen output.
perform at_selection_screen_output.
at selection-screen.
perform at_selection_screen.
*&      Form at_selection_screen_output
form at_selection_screen_output.
*" Hide the appropriate fields
loop at screen.
    if p_rb_01       = 'X'
    and screen-group1 = 'BL2'.
      screen-active = '0'.
    endif.
    if p_rb_02       = 'X'
    and screen-group1 = 'BL1'.
      screen-active = '0'.
    endif.
    modify screen.
endloop.
endform.                    "at_selection_screen_output
*&      Form at_selection_screen
form at_selection_screen.
*" trap the radiobutton
if sscrfields-ucomm = 'ZRB1'. "clicked Subtotal checkbox
*" if you want to trap this radio button press here
endif.
endform.                    "at_selection_screen

SELECT-OPTION IN SCREEN (SCREEN-PAINTER)

I want to put a select option in a screen type screen painter
Using this the user could enter a ranger of personal numbers.
Can any one give me a clue on how to do that ?

This is the code of the program and I my break point I do not have anything in SELPERNR
REPORT ZY_TESTSUBSCREEN                        .
TABLES: PA0003.
Custom Selection Screen 1010
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: SELPERNR FOR PA0003-PERNR.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN END OF SCREEN 1010.
CALL SCREEN 100.
BREAK STEPHANK.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CHECK SY-UCOMM(1) NE '%'.
LEAVE TO SCREEN 0.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
This is the screen flow
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN AREA INCLUDING SY-REPID '1010'.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
Rich do you have any idea why ?

Module pool programming " to add selection-option on screen"

I want to add selection option for a field ( matnr ) on the screen in module pool programmiing. ( how it comes in report programming). If you you know how to add Please help me to solve.....

Sure, you need to define your selection screen as a subscreen, then embed this into your subscreen area on the dynpro. Here is a sample program.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Create Screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

Problem in creating selection screen from screen painter

hi ,
      i am working with screens i have created a screen and in that wehn i click report button it has to ask for select options for dates.from there i will write a select quesry based on selection dates ...how to call a selection screen from screen.i created an include and in that include i used select options.but it is showing error message .guide me how to do it ?

Hi..
Here for your problem,
I have created a button with function code 'CLICK' in screen no 1000.
when I click on the button I am capturing the ok_code and displaying the selection screen.
ok_code = sy-ucomm.
case:ok_code.
when 'CLICK'.
         SELECTION-SCREEN BEGIN OF SCREEN 500 TITLE title.
         SELECT-OPTIONS: P_DATE for sy-datum.
         SELECTION-SCREEN END OF SCREEN 500.
title = 'Input Date'.
CALL SELECTION-SCREEN '0500'.
endcase.
You can also have them as subscreen by providing the required parameters in the selection screen.
Hope this solves your problem.
Warm Regards,
Bhuvaneswari.

To display the user login details in selection-screen( input screen )

HI Experts,
I have a requirement.
Assume there is a report on travel details. Report access has been given to all in the organization based on authorization level.
Before excecuting the report, in the selection-screen(input screen) itself I need to display the login user details.
suppose user A belongs to ITS-business unit and user B-belongs to RDS-business unit and Industry group-Multi markets.
so when User B logs into production system and try to access the report, in the selection screen, i need to display like
user-id-- XXXX          Business Unit---RDS             and IG -
Multi Markets
how to achieve this? User details will vary based on login.
Regards,
Praveen

check this
REPORT Z_demo.
*& Function Modules: HR_GET_EMPLOYEE_DATA
*&                    HR_IMAGE_EXISTS
*&                    SCMS_DOC_URL_READ
*&                    HR_IMAGE_RESET
*& Class & Methods : CL_GUI_DOCKING_CONTAINER
*&                    CL_GUI_PICTURE->SET_POSITION
*&                    CL_GUI_PICTURE->SET_DISPLAY_MODE
*&                    CL_GUI_PICTURE->DISPLAY_MODE_FIT
*&                    CL_GUI_PICTURE->LOAD_PICTURE_FROM_URL_ASYNC
*REPORT ZEMPLOYEE.
TABLES: PA0001, PERSON.
*----------------------Declaration for Image------------------------*
DATA: DOCKING_CONT TYPE REF TO CL_GUI_DOCKING_CONTAINER, " Custom Container
      PICTURE TYPE REF TO CL_GUI_PICTURE.
*--------------------Declaration of Internal table------------------*
DATA: ITAB_EMPDATA LIKE TABLE OF PERSON.
DATA: ITAB_DATA LIKE TABLE OF PERSON WITH HEADER LINE.
DATA: P_CONNECT_INFO LIKE TABLE OF TOAV0 WITH HEADER LINE.
DATA: P_DOCUMENT_TYPE LIKE TOAV0-RESERVE.
DATA: URL(255) TYPE C.
DATA: HANDLE TYPE I.
DATA: PPERNR TYPE PA0001-PERNR.
*----------------------Start of Selection Screen----------------------*
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-099.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN COMMENT 40(25) TEXT-010 .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-002 FOR FIELD PERNR.
PARAMETERS PERNR TYPE PA0001-PERNR.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-008 FOR FIELD ENAME.
PARAMETERS ENAME TYPE PA0001-ENAME.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-003 FOR FIELD PERSG.
PARAMETERS PERSG TYPE PA0001-PERSG.
SELECTION-SCREEN COMMENT 45(15) TEXT-009 FOR FIELD WERKS.
PARAMETERS WERKS TYPE PA0001-WERKS.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-004 FOR FIELD PERSK.
PARAMETERS PERSK TYPE PA0001-PERSK.
SELECTION-SCREEN COMMENT 45(15) TEXT-005 FOR FIELD KOSTL.
PARAMETERS KOSTL TYPE PA0001-KOSTL.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-006 FOR FIELD ORGEH.
PARAMETERS ORGEH TYPE PA0001-ORGEH.
PARAMETERS ORGEHTXT TYPE PERSON-ORGEH_TXT .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(15) TEXT-007 FOR FIELD PLANS.
PARAMETERS PLANS TYPE PA0001-PLANS.
PARAMETERS PLANSTXT TYPE PERSON-PLANS_TXT .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN END OF BLOCK B1.
*AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ENAME'
    OR SCREEN-NAME = 'PERSG'
    OR SCREEN-NAME = 'PERSK'
    OR SCREEN-NAME = 'KOSTL'
    OR SCREEN-NAME = 'WERKS'
    OR SCREEN-NAME = 'ORGEH'
    OR SCREEN-NAME = 'PLANS'
    OR SCREEN-NAME = 'ORGEHTXT'
    OR SCREEN-NAME = 'PLANSTXT'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ORGEHTXT'
    OR SCREEN-NAME = 'PLANSTXT'.
      SCREEN-OUTPUT = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
PERFORM GET_PIC.
*AT SELECTION-SCREEN .
AT SELECTION-SCREEN .
PPERNR = PERNR.
CALL FUNCTION 'HR_GET_EMPLOYEE_DATA'
    EXPORTING
      PERSON_ID             = PPERNR
      SELECTION_BEGIN       = SY-DATUM
      SELECTION_END         = SY-DATUM
    IMPORTING
      PERSONAL_DATA         = ITAB_DATA
    EXCEPTIONS
      PERSON_NOT_FOUND      = 1
      NO_ACTIVE_INTEGRATION = 2
      OTHERS                = 3.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENAME = ITAB_DATA-ENAME.
PERSG = ITAB_DATA-PERSG.
PERSK = ITAB_DATA-PERSK.
ORGEH = ITAB_DATA-ORGEH.
PLANS = ITAB_DATA-PLANS.
KOSTL = ITAB_DATA-KOSTL.
WERKS = ITAB_DATA-WERKS.
ORGEHTXT = ITAB_DATA-ORGEH_TXT.
PLANSTXT = ITAB_DATA-PLANS_TXT.
*Function Module To check Existance of Image
CALL FUNCTION 'HR_IMAGE_EXISTS'
    EXPORTING
      P_PERNR        = PPERNR
    IMPORTING
      P_CONNECT_INFO = P_CONNECT_INFO
    EXCEPTIONS
      OTHERS         = 2.
     P_DOCUMENT_TYPE = P_CONNECT_INFO-RESERVE.
*Function Module To Get the URL of Image
CALL FUNCTION 'SCMS_DOC_URL_READ'
    EXPORTING
      STOR_CAT    = SPACE
      CREP_ID     = P_CONNECT_INFO-ARCHIV_ID
      DOC_ID      = P_CONNECT_INFO-ARC_DOC_ID
      COMP_ID     = 'DATA'
      DP_URL_ONLY = 'X'
    IMPORTING
      URL         = URL
    EXCEPTIONS
      OTHERS      = 10.
IF SY-SUBRC <> 0.
ENDIF.
*Method To load Image from URL
CALL METHOD PICTURE->LOAD_PICTURE_FROM_URL_ASYNC
    EXPORTING
      URL = URL.
IF SY-SUBRC NE 0.
ENDIF.
IF PPERNR NE PERNR.
*Function Module To Reset Image
    CALL FUNCTION 'HR_IMAGE_RESET'
      EXPORTING
        HANDLE         = HANDLE
      EXCEPTIONS
        INVALID_HANDLE = 1
        OTHERS         = 2.
    IF SY-SUBRC <> 0.
    ENDIF.
ENDIF.
*& Form Get_Pic
FORM GET_PIC.
DATA: REPID LIKE SY-REPID.
REPID = SY-REPID.
IF PICTURE IS INITIAL.
*Object To Create the Custom Container
    CREATE OBJECT PICTURE
      EXPORTING
        PARENT = DOCKING_CONT.
    CHECK SY-SUBRC = 0.
*Method To Set Position of Image
    CALL METHOD PICTURE->SET_POSITION
      EXPORTING
        HEIGHT = 47
        LEFT   = 610
        TOP    = 25
        WIDTH = 70.
*Method To Set Display Mode Fit to Container
    CALL METHOD PICTURE->SET_DISPLAY_MODE
      EXPORTING
        DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT.
ELSE.
*Function Module To Reset Image
    CALL FUNCTION 'HR_IMAGE_RESET'
      EXPORTING
        HANDLE         = HANDLE
      EXCEPTIONS
        INVALID_HANDLE = 1
        OTHERS         = 2.
    IF SY-SUBRC <> 0.
    ENDIF.
ENDIF.
ENDFORM. "Get_pic

How to realize select-option in screen

Hi,everyone.
in a report , i can define select-option in SELECTION-SCREEN .
how can i realize the similar function in a screen ?
ths!

Hi,
Check this sample program to define selection screen in dialog programming.include the selection screen in a subscreen and then include the subscreen in your screen.
report YS_SELECTION .
tables: mara.
Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
create   screen 100 and create a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.
Laxman

How to degin a select-option in screen painter?

Help me !
How can i create an object like select-option in screen painter.
I want to input a range ,but there are no button or text   in screen painter like select-option?

hai u can create select options on screen but in little differernt way..
1st way : if u want to give only 1 interval then declare on screen as two different variables in same line
and after that append the value in ranges.
2nd way: here u can define as asingle input vriable beside that variable u can give a icon as extension in select option and give give some function code to that.if we click on that in user command write following code :
IF V_OKCODE = 'EXT'.
    CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
        EXPORTING
             TITLE             = 'Title'
             TEXT              = 'Text'
             SIGNED            = 'X'
        LOWER_CASE        = ' '
        NO_INTERVAL_CHECK = ' '
        JUST_DISPLAY      = ' '
        JUST_INCL         = ' '
        EXCLUDED_OPTIONS =
        DESCRIPTION       =
             HELP_FIELD        = 'T001W-WERKS'
        SEARCH_HELP       =
         TABLES
              RANGE             = R_WERKS
        EXCEPTIONS
             NO_RANGE_TAB      = 1
             CANCELLED         = 2
             INTERNAL_ERROR    = 3
             OTHERS            = 4
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
help field the field reference wich u want to declare and range is where values will be stored atomatically as in select options.
once we click the icon if we execute the function module a window will open as in selection option in reports.there user can enter the values.once the user enters the values it will stored automatically in ranges declared like r_werks in above example.
try it..

How to declare and work with select-option in screen painter?

hello there,
can anybody plz suggest me ,how to declare and work with select-option in screen painter?
neon

Hi Blue,
Please check these threads which will help you a lot..
module pool programming " to add selection-option on screen"
Re: Select option in Dialog program screen
Re: SELECT-OPTIONS in Screen
Good luck
Narin

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Stuck on select a keyboard screen

I just reinstalled snow leopard on my macbook because the HD was having issues. I restarted it and it got stuck on the select a keyboard screen. I tried using fsck -f in single user mode and there are no known issues with the HD. I also tried to create a new admin account by using /sbin/mount -uaw and then rm /var/db/ .applesetupdone in single user mode. None of this has worked. Any ideas?

Well, this was a strange one. After paying another visit to the Genius bar, it was discovered my replacement hard drive was in fact the problem - the Mac simply couldn't see it. (The technician confirmed that none of them had ever encountered such an issue.) So with yet another new hard drive, the link above worked. Ie, first format the drive, then the restore will be able to 'see' the destination.

Variable screen/variant screen authorization issue

HI All,
We have implemented standard Cost Center Overview Report(0SR_C02_Q0002) in BI 7.
We have three selection fields:
1.Company Code which is mandatory
2.My controlling Area which is also mandatory
3.Costcenter which is not mandatory
The requirement we are facing over here is that in the Variable screen/variant screen when I enter a company code, then I need to display dynamically only those "My Controlling Area" values which are assigned to that particular company code and not all. In the same way after selecting the appropriate "My controlling area" value, I need to display only those cost centers in the cost center selection field which are assigned to the selected company code and My controlling area combination and not all.
can anyone guide me on how to go about on this authorization issue at the variable screen itself.
Please treat this issue/requirement on high priority.
Appreciated in advance.
Regards,
raps.

Hi,
I think that an alternative to solve your concern could be using Web Application Designer (WAD). In this respect, there are several design options, with different levels of complexity.
As the simplest alternative, you could create a WAD including your query and three Dropdown Boxes: one for Company, a second for Controlling area and another for Cost center. The four mentioned elements should be linked to the same dataprovider so, when you select a company, the options in the other two Dropdown boxes and the information in the query are updated.
In order to enforce mandatory filter selection at Company and Controlling area level, you should set NO_REMOVE_FILTER='X' in both two Dropdown boxes, so that "All values" option -which would mean no filtering- is not offered.
I hope this helps you.
Regards,
Maximiliano

When trying to edit a photo, it disappears (black screen) or screen is full of lines. Is this a bug with the latest software update?

After updating with the latest software, when trying to edit a photo, it disappears (black screen) or screen is full of lines. If I blindly crop or edit the photo, when I exit edit mode, those changes have been made, but obviously this is unacceptable. Is this a bug with the latest software update?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Selection Screen in Screens

Similar Messages

Maybe you are looking for