Selection Screen seems not to be transported, all transport log OK

hi,
our ABAP build own Z-program in SDV. After that, they transport the program to QA client using STMS and also to Production Client using the same method. All the transport log is error-free.
The problem occurs in PRD, when all selection screen declared on SE38 didn't appear when program is executed. But, when this program is executed in DEV client or QA client, all selection screen appear
correctly as declared in SE38.
In some case, all selection screen is appears correctly if the program is run on some of our application server, but didn't appear on the other application server.
is there something we missed ? or there is a problem in our STMS, or SE38 ?
thank you

I guess if the latest request is in the PRD, it takes along with it the changes related to all previous requests.
If the object is in Request R1 and R1 is released but not transported.
Now the object is again edited and saved in R2.
R2 is transported. The changes done in R1 although its not sent to PRD, will come in the request R2.
But just check if all the previous versions are in PRD.
There could be a unrectified problem sometimes which may appear.
If you are sure all is fine, just create a Transport of Copies of the request and retransport it.
Also dont forget to check the syntax and consistency of the request.
It had happened with me that I had transoported the request with inactive object to PRD and I was in big trouble
good luck
reagrds

Similar Messages

Selection Screen is not visible when i run tcode S_ALR_87013611

Hello all,
whenever i run T-code S_ALR_87013611.The report is directly executed . it does not stop at selection screen as i want to change the parameters in the screen.but the selection screen is not coming. as the report is generated on the basis of previous data selected.
Please let me know is there any user setting through which this setting can be changed.
Thanks
Naveen

Are you using Webgui / portal or SAPgui
Regards
Subodh

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?

cor-el
Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
bossman344

HT4437 Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

Is it possible to zoom in photos when using airplay? It seems not to work at all. I can only zoom in if i use mirroring and even then i have to reconnect mirroring each time I chage an albumor even go from the photo to the album level.

No.
I find it extremely frustrating that Apple does not care for such an obvious bug affecting one of the basic funcionalities of AirPlay. Unless, of course, if there's something I don't know - but I've done some research and it seems that plenty of people have same issue and no solution is settled.

It shows the log sequence not found error while all the log seqences exist?

Why the database shows the log sequence not found error while all the log seqences exist?
SQL> select*from v$log_history;
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
1 657328345 1 1 519368 13-JUN-08 543434
519368 13-JUN-08
2 657370849 1 2 543434 13-JUN-08 567705
519368 13-JUN-08
3 657373012 1 3 567705 14-JUN-08 570408
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
4 657373039 1 4 570408 14-JUN-08 570464
519368 13-JUN-08
5 657374623 1 5 570464 14-JUN-08 573505
519368 13-JUN-08
6 657375015 1 6 573505 14-JUN-08 573856
519368 13-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
7 657376537 1 1 570465 14-JUN-08 573543
570465 14-JUN-08
8 657377084 1 2 573543 14-JUN-08 575109
570465 14-JUN-08
9 657377094 1 3 575109 14-JUN-08 575114
570465 14-JUN-08
RECID STAMP THREAD# SEQUENCE# FIRST_CHANGE# FIRST_TIM NEXT_CHANGE#
RESETLOGS_CHANGE# RESETLOGS
10 657377103 1 4 575114 14-JUN-08 575121
570465 14-JUN-08
11 657377106 1 5 575121 14-JUN-08 575123
570465 14-JUN-08
11 rows selected.
RMAN> flashback database to sequence=10 thread=1;
Starting flashback at 14-JUN-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=155 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of flashback command at 06/14/2008 13:03:15
RMAN-20206: log sequence not found in the repository

Apart from the output being hardly readable (please refer to the FAQ in the right upper hand corner how to post output), I don't see any sequence 10.
You seem to mistake the column recid for the sequence column.
The sequences are listed in -not surprisingly- the sequence# column.
Sybrand Bakker
Senior Oracle DBA

Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!

Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

When I click "back" button selection screen is not appearing

Dear All,
1) I have a "report" which takes some parameteres in the seclection screen ( standard 1000 ) and displayes a report. This is transported. Say the name is ZPRG1
2) We have copied ZPRG1 to ZPRG_temp and modified some logic and copied back to ZPRG1.
3) All looks fine but in ZPRG1 in SE80 it is not displaying screen "1000" listed. And when I pressed "back" button from the standard report menu it is going into "blank" screen first. and then when i click again it comes to the selection screen. I understand that some thing happened with GUI stuff but ran out of all ideas and coming here to get some help from you..
I am almost in a lost state.. can you please suggest me?
Thanks for your time.
Regards,
Kiran

Hi zhenglin gu,
Finally I found the reason.. still not conviced.. but the issue is happening when I write block with in the block. I am not convinced but it is true here..
Issue code******** ( Block with in block )
SELECTION-SCREEN BEGIN OF BLOCK CHECK1 WITH FRAME TITLE ext-t01.
*skip 1.
SELECTION-SCREEN BEGIN OF BLOCK CHECK2 WITH FRAME TITLE text-t00.
select-options: s_system for /BIC/AZSEUST0400-/BIC/ZSYSIDNT
                no-extension no intervals .
parameters:   P_USER   type /BIC/OIZSECUNAME OBLIGATORY.
select-options: S_PROF for zsecurity-value_1 no intervals.
SELECTION-SCREEN PUSHBUTTON 60(20) BUT1 USER-COMMAND PROF
                            VISIBLE LENGTH 25.
SELECTION-SCREEN END OF BLOCK CHECK2.
PARAMETERS: P_AB RADIOBUTTON GROUP gr1,
            P_CON RADIOBUTTON GROUP gr1.
SELECTION-SCREEN END OF BLOCK CHECK1.
Issue ********
No Issue ******** ( Outer block is comented)
*SELECTION-SCREEN BEGIN OF BLOCK CHECK1 WITH FRAME TITLE text-t01.
*skip 1.
SELECTION-SCREEN BEGIN OF BLOCK CHECK2 WITH FRAME TITLE text-t00.
select-options: s_system for /BIC/AZSEUST0400-/BIC/ZSYSIDNT
                no-extension no intervals .
parameters:   P_USER   type /BIC/OIZSECUNAME OBLIGATORY.
select-options: S_PROF for zsecurity-value_1 no intervals.
SELECTION-SCREEN PUSHBUTTON 60(20) BUT1 USER-COMMAND PROF
                            VISIBLE LENGTH 25.
SELECTION-SCREEN END OF BLOCK CHECK2.
PARAMETERS: P_AB RADIOBUTTON GROUP gr1,
            P_CON RADIOBUTTON GROUP gr1.
*SELECTION-SCREEN END OF BLOCK CHECK1.
End of Block2.
No Issue ********
I think I used several blocks with in blocks.. but I do not know why it is hapening.. in my case, i am fine with eliminating the outer block.. so removed and transporting it...
Message was edited by: Hari Kiran

Selection screen field not accepting 0 as a value

i have declared a field in the selection screen as
SELECT-OPTIONS: s_level FOR crmm_territory-level_id .
and this field will comprise of values from 0-9. but when im executing the report this field is not accepting 0 as a value, instead it is treating it as a blank and providing me all the values for s_level from 0-9.
its working fine with any other value and is displaying their respective values for 1-9
only problem is when i give the value as zero.
also in the debugger i tried to IF s-level[] is not initail...its showing it as initial
while i have provided it a value of 0.
thanks.

Hello Divya,
If you are giving 0 in the select-options....
if that field is numeric... it means that it is inital.
If that field is character... then it will display the result accordingly.
Check with the data element of the reference field.
Reward If Helpful
Regards
Sasidhar Reddy Matli.

Selection screen field not working in Query

Hi Gurus!
I have a small problem with one of my query that I just created for finding status of our customers. I have a code section which handles it all . The problem is that I ahve a user field called "Check date" which I ahve used in selection screen as well as the layout, when I put a value in this field in the selection screen the report dosent give any output " NO data to display" but when I leave it open it does give me the out put with the saem check date as I ahd entered earlier in my selection screen.
I am not sure where my selection code is working wrong . Could anyone please help me out please.
DATA: ls_vakpa LIKE vakpa.
DATA old_date LIKE sy-datum.
old_date = key_date - num_days.
status = 'ACTIVE'.
check_date = old_date.
* (If I entere this field (check_date) with any date
* and run it does not give me output and without
* entry it dioes give output.
SELECT SINGLE * FROM vakpa INTO ls_vakpa
 WHERE kunde = kna1-kunnr
 AND audat > old_date.
 IF sy-subrc <> 0.
 SELECT SINGLE * FROM vakpa INTO ls_vakpa
 WHERE kunde = kna1-kunnr
 AND audat < old_date.
 IF sy-subrc = 0.
 ls_audat = ls_vakpa-audat.
 ls_vbeln = ls_vakpa-vbeln.
 ELSE.
 CLEAR ls_audat.
 clear ls_vbeln.
 ENDIF.
 status = 'INACTIVE'.
ELSE.
 ls_audat = ls_vakpa-audat.
 ls_vbeln = ls_vakpa-vbeln.
ENDIF.
Edited by: Rob Burbank on Apr 7, 2010 12:08 PM

DATA: ls_vakpa LIKE vakpa.
DATA old_date LIKE sy-datum.
old_date = key_date - num_days.
status = 'ACTIVE'.
check_date = old_date.
if old_date is initial.
 old_date = key_date - num_days.
 check_date = old_date.
endif.
SELECT SINGLE * FROM vakpa INTO ls_vakpa
 WHERE kunde = kna1-kunnr
* AND audat > old_date.
 AND audat > check_date.
IF sy-subrc <> 0.
 SELECT SINGLE * FROM vakpa INTO ls_vakpa
 WHERE kunde = kna1-kunnr
* AND audat < old_date.
 AND audat < check_date.
 IF sy-subrc = 0.
 ls_audat = ls_vakpa-audat.
 ls_vbeln = ls_vakpa-vbeln.
 ELSE.
 CLEAR ls_audat.
 clear ls_vbeln.
 ENDIF.
 status = 'INACTIVE'.
ELSE.
 ls_audat = ls_vakpa-audat.
 ls_vbeln = ls_vakpa-vbeln.
ENDIF.

At selection screen output not responding

Hi ppl,
I've 4 selection options in my screen. however I just need user to insert only 1 of the 4 for searching. Therefore i included 4 radio buttons. when user select rbf, sfileno will activer and other 3 will be grayed out, when user select rbi, sidnum will active and other will not be active and so forth. You can see the codes below.
However, during the program running, I found out when i select rbf, the other select options fields - sfileno, sidnum n scompsno are not inactive/grayed. It is the same when I seledt the other radio button. I just seem that i receive no response from the program. What have i done wrong here. please help. TQ
SELECTION-SCREEN BEGIN OF BLOCK frm1 WITH FRAME TITLE text-t01 .
SELECT-OPTIONS : sfileno FOR zlic_masterdb-nofailpermohonan modif id f01
 sidnum FOR zcustomer-idnumber modif id i01,
 sconame FOR zcustomer-contactname modif id n01,
 scompsno FOR zcom_compdhdr-compsno modif id c01.
PARAMETERS: rbf RADIOBUTTON GROUP g1 ,
rbi RADIOBUTTON GROUP g1,
rbn RADIOBUTTON GROUP g1,
rbc RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK frm1.
INITIALIZATION.
sfileno = '00001'.
 AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
CHECK SCREEN-GROUP1 = 'f01' OR
SCREEN-GROUP1 = 'i01' OR
SCREEN-GROUP1 = 'n01' OR
SCREEN-GROUP1 = 'c01'.
IF rbf = 'X'.
IF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ELSEIF rbi = 'X'.
IF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ELSEIF rbn = 'X'.
IF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ELSEIF rbc = 'X'.
IF SCREEN-GROUP1 EQ 'c01'.
 SCREEN-ACTIVE = 1.
ELSEIF SCREEN-GROUP1 EQ 'f01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'n01'.
 SCREEN-ACTIVE = 0.
ELSEIF SCREEN-GROUP1 EQ 'i01'.
 SCREEN-ACTIVE = 0.
ENDIF.
ENDIF.
MODIFY SCREEN.
continue.
ENDLOOP.

hi Enzo
Check my sample code
TABLES: eban,
 SSCRFIELDS.
SELECTION-SCREEN BEGIN OF SCREEN 100 TITLE title.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
PARAMETER:rad1 RADIOBUTTON GROUP rad USER-COMMAND frad1 DEFAULT 'X',
 rad2 RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETER: mtr AS CHECKBOX MODIF ID g3 USER-COMMAND chk1,
 p_matnr TYPE eban-matnr MODIF ID g1,
 sloc AS CHECKBOX MODIF ID g3 USER-COMMAND chk2,
 str_loc TYPE eban-lgort MODIF ID g4.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: matnr1 FOR eban-matnr MODIF ID g2.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN PUSHBUTTON /20(10) name USER-COMMAND UCOM.
SELECTION-SCREEN END OF SCREEN 100.
name = 'FETCH'.
title = 'Test Report'.
CALL SELECTION-SCREEN '100'.
TYPE-POOLS slis.
* declaration of internal tables and work areas to be used
DATA: BEGIN OF it_pr OCCURS 0,
 banfn TYPE eban-banfn,
 bnfpo TYPE eban-bnfpo,
 loekz TYPE eban-loekz,
 statu TYPE eban-statu,
 ekgrp TYPE eban-ekgrp,
 matnr TYPE eban-matnr,
 werks TYPE eban-werks,
 lgort TYPE eban-lgort,
 preis TYPE eban-preis,
 peinh TYPE eban-peinh,
 END OF it_pr.
DATA: BEGIN OF it_mat OCCURS 0,
 matnr TYPE eban-matnr,
 END OF it_mat.
*DATA:BEGIN OF ITAB1 OCCURS 0,
DATA: l_answer.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
 wa_fieldcat LIKE LINE OF it_fieldcat,
 it_event TYPE slis_t_event,
 wa_event TYPE slis_alv_event.
* declaration of variables to be used
DATA: r_ucomm TYPE sy-ucomm,
 mat_no TYPE eban-matnr,
 len TYPE i VALUE 1,
 count TYPE i VALUE IS INITIAL,
 iflag TYPE i VALUE IS INITIAL,
 iflag1 TYPE i VALUE 0.
DATA :pr_id TYPE sy-repid,
rt_extab TYPE slis_t_extab.
INITIALIZATION.
pr_id = sy-repid.
probably it would sol;ve ur problem
regards
ravish
plz dont forget to reward points if helpful

VA01 F4 selection screen do not need CR document type in list of doc.type

Hi
My requirement is following
step 1: execute T.code VA01
step 2: Press F4 on Order type: you will get list of all Order doument type, (like, OR,KE,KB,KR,CR,DR and etc..)
step 3: Now i don't want CR document type in list of order document type through F4 selection screen , .
Kindly please help where i need to do configuration to achieve my requirement
regards
pinal

Hi Pinal,
Goto VOV8
Position on CR
Keep Block Status X or A
Now check in VA01 and F4 on Document Type CR will not be there...
Hope it will help..
Regards,
HP

Selection screen text not appearing in other than engllish language .

Hello All,
            On selction screen I have 3 select-option and 2 radio button for that I have the selection text maintain in 'Selection Text".
            When I login to system using French language then on selection screen only select options text is appearing in French language and Radio buttons text is not appearing in French language, it appearing in English language. In the program where I have maintain the selction text one column is there name as "Dictionary Object" which has the check box. In that, for select options check box is check in Dictionary object but for Radio button that check box is in disable mode.
             So how can Radio buttons text is appearing in French language when login through french language.

You've two options. One, log in in French and maintain the texts for the radio buttons directly. Two, use tx SE63 to maintain the texts for the radio buttons in French.
The select-options are automatically translated because their texts come from the data dictionary, and (as presumably they're SAP standard types), they're already translated as part of the French language pack. But the radio-buttons you have to do yourself.
matt

My select select statement seems not to work...

Hello experts,
I am having trouble with my select statement below. Here is what I need to do:
1. loop at itab it_equz.
2. get single asset number(ANLNR) and description(SHTXT) from table ITOB where EQUNR =_equz-equnr.
3. get single asset number(ANLN1), asset subclass(ANLN2 and subnumber(ORD42 from table ANLA where its asset(anln1) equals to the asset fetched by ITOB. (no. 2 step) and DEAKT eq '00000000'
4. Now, I would get all fields(select single) in table ANLC where ANLN1 equals to asset fetched by ANLA and ANLN2 equals to ANLN2 fetched by ANLA and AFABE eq '01'.
5.endloop.
Now, the problem is that I can't seem to get the right values in table ANLC. Now, my boss said that the values that I must get in ANLC must not be deactivated. So I did that by getting the required fields(no 3 step) in table ANLA where its DEAKT is equal to '00000000'.
Now, my select statement for ANLC seems not to work properly since I have the proper where conditions. Anyway, below is my select statement that I did:
LOOP AT it_equz. "no 1 step
SELECT SINGLE anlnr shtxt FROM itob   "no 2 step
          INTO (it_itob-anlnr, it_itob-shtxt)
          WHERE equnr = it_equz_dum1-hequi.
MOVE it_itob-anlnr TO it_finaltab-asset_dum.
            MOVE it_itob-anlnr TO it_finaltab-asset.
            MOVE it_itob-shtxt TO it_finaltab-description.
SELECT SINGLE bukrs anln1 anln2 ord42   "no 3 step
            FROM anla
            INTO (it_anla-bukrs, it_anla-anln1, it_anla-anln2,
                  it_anla-ord42)
            WHERE anln1 = it_finaltab-asset
              AND bukrs IN r_iwerk
              AND deakt = '00000000'.
MOVE it_anla-ord42 TO it_finaltab-asset_sub.
              WRITE it_finaltab-asset TO v_asset.
              CONCATENATE v_asset '-' it_anla-anln2
              INTO it_finaltab-asset_subnum.
SELECT SINGLE bukrs anln1 gjahr afabe knafa kansw "no 4 step
                          answl kaafa nafal aafav aafag
                          nafap aafap nafav nafag FROM anlc
                      INTO (it_anlc-bukrs, it_anlc-anln1, it_anlc-gjahr,
                            it_anlc-afabe, it_anlc-knafa, it_anlc-kansw,
                           it_anlc-answl, it_anlc-kaafa, it_anlc-nafal,
                           it_anlc-aafav, it_anlc-aafag, it_anlc-nafap,
                           it_anlc-aafap, it_anlc-nafav, it_anlc-nafag)
                        WHERE anln1 EQ it_finaltab-asset
                          AND anln2 EQ it_anla-anln2
                          AND bukrs EQ it_anla-bukrs
                          AND afabe EQ '01'.
it_finaltab-accq_cost = it_anlc-kansw + it_anlc-answl.
            IF p_posdep = 'X'.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag.
            ELSE.
              it_finaltab-acc_dep = it_anlc-knafa +
                                    it_anlc-nafav +
                                    it_anlc-nafag +
                                    it_anlc-kaafa +
                                    it_anlc-aafav +
                                    it_anlc-aafag +
                                    it_anlc-nafap +
                                    it_anlc-aafap.
            ENDIF.
APPEND it_finaltab. CLEAR it_finaltab.
          APPEND it_equz_dum2. CLEAR it_equz_dum2.
          CLEAR it_itob. CLEAR it_anla. CLEAR it_anlc.
endloop.

Hi,
Please avoid selection in loop. it will lead to major performance issue.
avoid move statements ; instead use assignment.
1st :- select the entire data into internal table
eg:-
SELECT anlnr shtxt FROM itob
INTO table it_itob
for all entries in it_equz
WHERE equnr = it_equz-hequi.
1st select
2nd select.
2nd :- now loop on ur internal table to get the desired result.
it is good to work with internal table rather than select statements in loop.
Regards

HT1414 Hi I could not activate my IPhone 4S, the touch- screen seem not working. So I could not active my phone. Please enlighten me or where could I send for check up?

Hi , can anyone tell me ,what to do as my iPhone 4S , suddenly, seem like hanged, I could not open or close my iPhone 4 S.
The phone touch screen can not activate lock in or lock out. So I could not use this phone at all.
Hope Apple Service can help me. What to do or visit their Apple agent in Singapore.
Thanks.. Stevchin.

RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

Selection Screen seems not to be transported, all transport log OK

Similar Messages

Maybe you are looking for