Send an attachment as part of an XML msg via ABAP Proxy (R3 6.40)
For 6.20 proxies check this:
http://help.sap.com/saphelp_xi20sr1/helpdata/en/18/dd5f3ce7ca3d3ee10000000a11402f/frameset.htm
Be aware, that you have to change the code after upgrade to 6.40/7.0
Regards
Stefan
Thanks that worked like a charm.
Similar Messages
-
Problem sending xls file in an attachment via ABAP proxy
Hello,
I have in tmp directory a xls file, I tranfer such file to a table, and afterwards I send in an attachment via ABAP proxy, here is the code:
l_attachment TYPE REF TO if_ai_attachment,
lt_attach TYPE prx_attach,
l_name TYPE string,
lx_string TYPE xstring,
l_string TYPE string,
l_type TYPE string,
des TYPE string.
CLASS cl_ai_factory DEFINITION LOAD.
DATA: BEGIN OF itab OCCURS 0,
raw(255) TYPE x,
END OF itab.
DATA: l_controller TYPE REF TO if_ai_posting_controller.
DATA: it TYPE zhcm_mt_segur_out.
CREATE OBJECT prxy.
OPEN DATASET orig FOR INPUT IN binary MODE.
READ DATASET orig INTO itab-raw.
WHILE sy-subrc = 0.
APPEND itab.
READ DATASET orig INTO itab-raw.
ENDWHILE.
CLOSE DATASET orig.
LOOP AT itab.
CONCATENATE lx_string itab-raw INTO lx_string in byte mode.
ENDLOOP.
L_NAME = 'Segur.xls'.
L_TYPE = CL_AI_ATTACHMENT=>IF_AI_ATTACHMENT~C_MIMETYPE_EXCEL.
TRY.
L_ATTACHMENT =
CL_AI_FACTORY=>CREATE_ATTACHMENT_FROM_binary(
P_DATA = LX_STRING
P_TYPE = L_TYPE
P_NAME = L_NAME ).
APPEND L_ATTACHMENT TO LT_ATTACH.
L_CONTROLLER = CL_AI_FACTORY=>CREATE_CONTROLLER( ).
L_CONTROLLER->SET_ATTACHMENTS( LT_ATTACH ).
CALL METHOD PRXY->EXECUTE_ASYNCHRONOUS
EXPORTING
CONTROLLER = L_CONTROLLER
OUTPUT = IT.
COMMIT WORK.
CATCH CX_AI_SYSTEM_FAULT .
DATA FAULT TYPE REF TO CX_AI_SYSTEM_FAULT .
CREATE OBJECT FAULT.
WRITE :/ FAULT->ERRORTEXT.
ENDTRY.
I am using a Mail receiver channel, I receive a mail, with to attachments, one .xml and the other one .bin, I save it to my computer and I change the extension to .xls and when I try to open it, the file is not valid and can be opened after being repaired. What Im doing wrong? I would like to receive a valid xls file, what i should change?
Thanks a lot,
LuisHi,
yes I know, I have used the MessageTransformBean module, and the PayloadSwapBean module. But which parameter I should use for leaving only one attachement in the e-mail. I did this configuration:
1
localejbs/AF_Modules/MessageTransformBean
Local Enterprise Bean
<b>trans</b>
2
localejbs/AF_Modules/PayloadSwapBean
Local Enterprise Bean
<b>swap</b>
3
localejbs/AF_Modules/MessageTransformBean
Local Enterprise Bean
<b>trans1</b>
4
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
Local Enterprise Bean
mail
<i><b>Module configuration</b></i>
trans
Transform.ContentDisposition
inline
swap
swap.keyName
payload-name
swap
swap.keyValue
Segur
trans1
Transform.ContentDescription
Segur
trans1
Transform.ContentDisposition
attachment;filename="Segur.xls"
trans1
Transform.ContentType
application/vnd.ms-excel;name="Segur.xls"
In the e-mail I get one attachement without name .xml and another one Segur.xsl, and I want only one attachment, the last one. What I should change in my configuration??
Best regards,
Luis -
Sending the Purchase Ordr frm ECC to PI(BPM) thrgh ABAP proxy communication
Hi Experts,
We have a requirement where we have to send the Purchase Orders(PO's) generated in ECC system to PI where the PO will be routed to webservices after some error handling(in BPM).etc.
We are able to generate the PO's in ECC system, but are searching for a way to push this data to the Service INterface (which we have generated through ABAP proxy connection in SPROXYin ECC) which we have used for implementing the BPM in PI.
We have thought of using BADI to push the PO's to the Service INterface.But have not been able to find a suitable BADI.
Please help in finding a suitable BADI or Suggest any Better way for doing the same if you are aware of....
Please respond quickly as we have short deadlines to be met....
Thanx in advance...
NandanHi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan -
Parse XML streams via ABAP program or class
Hi all,
because of a new requirement we would like to create characteristics from a XML file by using the following structure.
xmlns:gdt="http://sap.com/xi/SAPGlobal/Global" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
We do not use SAP XI but I would like to parse the XML stream from a file in order to have the information available in a ABAP program. For this reason I'm looking for a standard SAP ABAP program or class to read and parse such a XML file.
I would appreciate if somebody have more details on this topic.Check this out.
XML to ABAP
Regards,
Rich Heilman -
Sending an XML message and using proxy at receiver end
hi all,
please suggest me the steps to be followed in order to send a XML message and accepting this message using proxies.
please help me out with detailed procedure.
thanks+regards,
UjwalkumarHi UjwalKumar,
Follow this link:
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
This blog gives an excellent description of 'FILE to Proxy' scenario.
what you need is XML to proxy...i.e. your scenario is very similar to this one...only diffrence is that , you wont be using FCC .since your source msg is in XML format..
Hope this helps..
Regards ,
Sushil -
INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario
Hi Experts,
Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
I will appreciate your support.
Thanks & Regards
SanCan you please explain the solution.
Regards,
Rashi -
Hi all,
i have a requirement to send the inbound payload in the mail content when any error occurs in ABAP proxy. How can I achieve this?
Thanksare you looking for this
The following program fetches the payload for a request message independently of a proxy instance and returns it in the system:
DATA:
ls_request TYPE [Data type of output parameter],
lo_fault TYPE REF TO cx_ai_system_fault,
lo_payload_handler TYPE REF TO IF_WS_PAYLOAD_HANDLER,
lo_payload TYPE REF TO if_ws_payload,
lt_request_data TYPE PRX_T_PARAM,
ls_request_data TYPE PRX_S_PARAM.
lo_pointer TYPE REF TO xstring,
Fill request data
request-field1 = '[Value1]'.
request-field1 = '[Value1]'.
request-fieldN = '[ValueN]'.
Use payload handler to get payload independently
from proxy call:
TRY.
Get Payload handler for a proxy method.
Note: You have to provide the proxy and method name in uppercase.
lo_payload_handler = cl_proxy_access=>get_payload_handler(
proxy_name = 'CO_...'
proxy_method = 'EXECUTE_SYNCHRONOUS' ).
Pass request data to payload handler
CLEAR lt_request_data.
CLEAR ls_request_data.
ls_request_data-name = 'OUTPUT'.
GET REFERENCE OF request into ls_request_data-value.
append ls_request_data to lt_request_data.
lo_payload =
lo_payload_handler->get_payload_from_request_data(
lt_request_data).
Catch system faults
CATCH cx_ai_system_fault INTO lo_fault.
WRITE: / 'System fault'.
WRITE: / 'Code:', lo_fault->code.
WRITE: / 'Text:', lo_fault->errortext.
EXIT.
ENDTRY.
Show payload for test purposes
lo_pointer = lo_payload->get_xml_pointer( ).
cl_proxy_service=>show_xml_document( lo_pointer->* ).
<b>Check this</b>
/people/krishna.moorthyp/blog/2005/12/23/monitoring-for-processed-xml-messages-in-abap-proxy
http://help.sap.com/saphelp_nw04/helpdata/en/31/6c5c3c3806af06e10000000a11402f/frameset.htm
2 xml documents in 1 payload
Thanks ! -
Send message with abap proxy client
I'm trying to send message to XI, but no message in sxmb_moni.
I have created logical port with LPCONFIG.
ABAP code
REPORT Z_HTTP_SEND.
DATA:
* Reference variables for proxy and exception class
lo_clientProxy TYPE REF TO ZPCO_MI_COMPANY_OB,
lo_sys_exception TYPE REF TO cx_ai_system_fault,
* Structures to set and get message content
ls_request TYPE ZPMT_COMPANY_ID,
ls_response TYPE ZPMT_COMPANY_DETAILS.
*Complete the structure ls_request for the request message.
*DATA: zmt_id type ZPMT_COMPANY_ID,
*zdt_id type ZPDT_COMPANY_ID,
*z_id_tab type ZPCOMPANY_ID_TAB,
*z_id type ZPCOMPANY_ID.
*z_id-COMPANY_ID = '3000'.
*append z_id to z_id_tab.
* zdt_id-RECORD = z_id_tab.
*zmt_id-MT_COMPANY_ID = zdt_id.
DATA tab TYPE ZPCOMPANY_ID_TAB WITH HEADER LINE.
tab-COMPANY_ID = '3000'.
APPEND tab.
ls_request-MT_COMPANY_ID-RECORD = tab[].
TRY.
* create proxy client
*CREATE OBJECT lo_clientProxy( u2018LOGICAL_PORT_NAMEu2019 ).
CREATE OBJECT lo_clientProxy.
* do synchronous client proxy call
CALL METHOD lo_clientProxy->execute_synchronous
EXPORTING output = ls_request
IMPORTING input = ls_response.
CATCH cx_ai_system_fault INTO lo_sys_exception.
* Error handling
ENDTRY.
Any ideas? Thanks very much,Hi,
Proxies communicate with the XI server by means of native SOAP calls over HTTP .RFC does not, so you have to convert from SOAP to RFC calls and vice versa. So XML conversion is required.
ABAP Proxies uses Webservice and Http Protocols. And if you use RFC it is mainly meant for Sync. call. But Proxies is used for both Sync and Async.
If you use ABAP Proxy , you can reduce the overhead calling the function again and again.
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
Re: JDBC Sender select/update problem
If u generate proxy for outbound interface then its client proxy and for inbound interface its server proxy.
In client proxy u can call the method to send messages but u can't modify it but in server proxy its possible to write a user code within the method to execute proxy.
CLIENT PROXY:
A WSDL description from a UDDI server (or an Internet page) is usually used to make a service executable in the Internet and to describe the interface of this service. You require a client proxy and not a server proxy to call this service by using the Web service infrastructure.
SERVER PROXY:
You can only generate ABAP server proxies from a WSDL description if they originate in the Integration Repository.You can also generate server proxies for Java and client proxies for ABAP from message interfaces.
s refer these doc about ABAP proxy ..
How do you activate ABAP Proxies? - Activate Proxy
ABAP Server Proxies - ABAP Server Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
Re: JDBC Sender select/update problem
ABAP Server Proxies
How do you activate ABAP Proxies?
ABAP Proxies in XI(Client Proxy)
File to R/3 via ABAP Proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/41e08c90-0201-0010-9197-d8774336ea78
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ae9874-109c-2910-f48a-e91f0cdd1c81
Smarter Approach for coding ABAP Proxies
regards,
Surya -
Error Handling for ABAP Proxy sender
Hello Everyone,
I am trying out a scenario of SAP R/3 to Oracle database (ABAP Proxy to JDBC).
I have the following code and it works fine.
CALL METHOD prxy->execute_asynchronous
EXPORTING
output = it.
commit work
CATCH cx_ai_system_fault .
DATA fault TYPE REF TO cx_ai_system_fault .
CREATE OBJECT fault.
WRITE :/ fault->errortext.
I know that the above Catch block would be used to handle system errors on the sender side.
Please tell me what kind of errors could these be and what I can do to test these errors. ie. I want to create error situations explicitely and see how they are handled.
Thanks and Regards,
AshwinThanks guys, this was useful.
My scenario is for Asynchronous communication.
I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
Have i got this right?
I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
The following receivers support acknowledgments:
ABAP and Java proxies (XI 3.0 SP1 for the latter)
Integration processes
IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
Receiver adapters support system acknowledgments but not application acknowledgments
My Receiver is JDBC. So I guess I cannot use acknowledgements either.
Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
I'll tell you abt what happened earlier.
My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
I need to handle such errors...ie. If the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
Thanks and Regards,
Ashwin -
Flex & PHP - Send email attachment
I'ld like for my visitor to be able to send an email to a friend with the creation from my application as an attatchment (so like a screencap of the creation). I can get Flex and PHP to communicate and send an email, but I can't get the image to send. It sends an attachment that is 2o or less and can't be opened (of course !).
I don't get an error return from my application
I found these posts linked below which helped me, but I still don't get how to pass the image from Flex to PHP.
Saving entire Flash document as JPEG to email as an attachment
Sending an E-mail with attachment with PHP from Flex
Here is my code from Flex :
private function sendMail():void{
var _nomSTF:String = nomSTF.text;
var _emailSTF:String = emailSTF.text;
var _emailFriendSTF:String = emailFriendSTF.text;
var _sujetSTF:String = sujetSTF.text;
var _messageSTF:String = messageSTF.text;
//IMAGE
var fr:FileReference = new FileReference();
var encoder:PNGEncoder = new PNGEncoder();
var screenshotData:BitmapData = new BitmapData(conteneurDeMonImage.width, conteneurDeMonImage.height, true, 0xFFFFFF);
screenshotData.draw(conteneurDeMonImage);
//var outputData:ByteArray = encoder.encode(screenshotData);
//var base64:Base64Encoder = new Base64Encoder();
var png:PNGEncoder = new PNGEncoder();
byteArray = png.encode(screenshotData);
//base64.encodeBytes(outputData);
//FIN IMAGE
var evValidMail:ValidationResultEvent = emailSTFValidator.validate();
var evValidMailFriend:ValidationResultEvent = emailFriendSTFValidator.validate();
var evValidName:ValidationResultEvent = nomSTFValidator.validate();
if (evValidMail.type == ValidationResultEvent.VALID
&& evValidName.type == ValidationResultEvent.VALID
&& evValidMailFriend.type == ValidationResultEvent.VALID){
emailService.send({senderName: _nomSTF, senderEmail:_emailSTF, emailFriendSTF: _emailFriendSTF,
emailSubject:_sujetSTF, emailMessage: _messageSTF, file : byteArray});
} else {
resultLabel.text="There are Form errors";
resultLabel.setStyle("styleName", "invalid");
private function emailResultSTF():void{
Alert.show("Votre message a bien été envoyé");
containerSendToFriend.visible = false;
<fx:Declarations>
<s:HTTPService id="emailService" url="src/mail.php" method="POST"
resultFormat="xml" useProxy="false"
result="emailResultSTF()"
fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail + '\n' + event.message.toString())"/>
</fx:Declarations>
And here's my PHP code :
$fileatt_type = "application/octet-stream";
$fileatt_name = "baignoireElyseeConcept.png";
$sender_name = $_POST['senderName'];
$email_from = $_POST['senderEmail'];
$email_subject = $_POST['emailSubject'];
$email_message = $_POST['emailMessage'];
$email_to = $_POST['emailFriendSTF'];
$headers = 'From:'.$sender_name.'<'.$email_from.'>';
$data= $_POST['file'];
$semi_rand = md5(time());
$mime_boundary = "==Multipart_Boundary_x{$semi_rand}x";
$headers .= "\nMIME-Version: 1.0\n" .
"Content-Type: multipart/mixed;\n" .
" boundary=\"{$mime_boundary}\"";
$email_message = "This is a multi-part message in MIME format.\n\n" .
"--{$mime_boundary}\n" .
"Content-Type:text/html; charset=\"utf-8\"\n" .
"Content-Transfer-Encoding: 7bit\n\n" .
$email_message . "\n\n";
$email_message .= "--{$mime_boundary}\n" .
"Content-Type: {$fileatt_type};\n" .
" name=\"{$fileatt_name}\"\n" .
"Content-Transfer-Encoding: base64\n\n" .
$data . "\n\n" .
"--{$mime_boundary}--\n";
$mailsend = mail($email_to, $email_subject, $email_message, $headers);
Thanks for your helpI've looked around for an answer for this for days and finally got it to work so here's how I did it (helped by a lot of ressources on the internet and specifically this one : http://j-query.blogspot.com/2011/02/save-base64-encoded-canvas-image-to-png.html)
here's my Flex code for my image :
var je:JPEGEncoder = new JPEGEncoder(100);
var bd:BitmapData = new BitmapData(conteneurDeMonImage.width,conteneurDeMonImage.height);
bd.draw(conteneurDeMonImage);
var ba:ByteArray = je.encode(bd);
var be:Base64Encoder = new Base64Encoder();
be.encodeBytes(ba);
var encodedData:String = be.toString();
// Testing if my base64 is working in FLEX
/*var byteArr:ByteArray;
var B64dec:Base64Decoder = new Base64Decoder();
B64dec.decode(encodedData);
byteArr = B64dec.toByteArray();
imageEnGrand.load(byteArr);*/
emailService.send({senderName: _nomSTF, senderEmail:_emailSTF, emailFriendSTF: _emailFriendSTF, emailSubject:_sujetSTF, emailMessage: _messageSTF, file : encodedData});
Here's my PHP code :
$fileatt_type = "application/octet-stream";
$fileatt_name = "test.jpg";
$sender_name = $_POST['senderName'];
$email_from = $_POST['senderEmail'];
$email_subject = $_POST['emailSubject'];
$email_message = $_POST['emailMessage'];
$email_to = $_POST['emailFriendSTF'];
$headers = 'From:'.$sender_name.'<'.$email_from.'>';
$data = $_POST['file'];
$data = str_replace('data:image/png;base64,', '', $data);
$data = str_replace(' ', '+', $data);
$img_data = base64_decode($data);
$png = chunk_split(base64_encode(($img_data)));
$semi_rand = md5(time());
$mime_boundary = "==Multipart_Boundary_x{$semi_rand}x";
$headers .= "\nMIME-Version: 1.0\n"."Content-Type: multipart/mixed;\n"." boundary=\"{$mime_boundary}\"";
$email_message =
"This is a multi-part message in MIME format.\n\n".
"--{$mime_boundary}\n"."Content-Type:text/html; charset=\"utf-8\"\n".
"Content-Transfer-Encoding: 7bit\n\n".$email_message."\n\n";
$email_message .= "--{$mime_boundary}\n" .
"Content-Type: {$fileatt_type};\n" .
" name=\"{$fileatt_name}\"\n" .
"Content-Transfer-Encoding: base64\n\n" .
$png . "\n\n" .
"--{$mime_boundary}--\n";
$mailsend = mail($email_to, $email_subject, $email_message, $headers);
I hope it helps someone who has the same problem as me ! -
Error when trying to send an attachment
Hi there,
I am running an application in Tomcat 5.5 and I am trying to send an email with an attachment via java mail. The attachment will eventually be a zip file containing wav files but I can't seem to get it to work with a text file yet.
I may be a little confused...I am especially confused with the DataHandlerSet stuff.
Here is the code:
public String sendmail(String msgSubject)
//Sets some variables.
String emailmultipart = "true"; //if this is set to false sends a simple message.
String msgText = "Some text \n\n";
String smtphost = "myhost";
String emailto = "[email protected]";
String emailfrom = "[email protected]";
//Gives the path of where the sound files are.
File soundfile = new File("myfile.txt");
boolean debug = true; // change to get more information
String msgText2 = "multipart message";
boolean sendmultipart = Boolean.valueOf(emailmultipart).booleanValue();
// set the host
Properties props = new Properties();
props.put("mail.smtp.host", smtphost);
// create some properties and get the default Session
Session session = Session.getDefaultInstance(props, null);
session.setDebug(debug);
try
// create a message
Message msg = new MimeMessage(session);
// set the from address
InternetAddress from = new InternetAddress(emailfrom);
msg.setFrom(from);
//set the to address
InternetAddress[] address =
new InternetAddress(emailto)
msg.setRecipients(Message.RecipientType.TO, address);
//set subject - support request id
msg.setSubject(msgSubject);
//decides whether to send plain text message or multi text message (from true/false in the command line)
//sends a simple plain text email
if(!sendmultipart)
// send a plain text message
msg.setContent(soundfile, "text/plain");
//sends an attached file.
else
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
//adds the text as normal
mbp1.setContent(msgText, "text/plain");
// create and fill the second message part
MimeBodyPart mbp3 = new MimeBodyPart();
// attach the file to the message
//FileDataSource fds = new FileDataSource(filen);
FileDataSource fds = new FileDataSource(soundfile);
mbp3.setDataHandler(new DataHandler(fds));
mbp3.setFileName(fds.getName());
// mbp3.setContent();
Multipart mp = new MimeMultipart();
//adds the text to the message
mp.addBodyPart(mbp1);
//adds the attachment to the message
mp.addBodyPart(mbp3);
// adds the content to the message
msg.setContent(mp);
//Transport - sends the message.
Transport.send(msg);
catch(MessagingException mex)
mex.printStackTrace();
//log.debug("At end of Send email");
return "nothing";
}Here is the error:
javax.mail.MessagingException: IOException while sending message;
nested exception is:
java.io.IOException: "text/html" DataContentHandler requires String object, was given object of type class javax.mail.internet.MimeMultipart
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:566)
at javax.mail.Transport.send0(Transport.java:151)
at javax.mail.Transport.send(Transport.java:80)
at questionnaireweb.Formemail.sendmail(Formemail.java:337)
at org.apache.jsp.web.emailrecorded_jsp._jspService(org.apache.jsp.web.emailrecorded_jsp:338)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:731)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:595)
I'd be really grateful for any help. I can't seem to get past this error not matter what I try. Sending the simple mail works, but sending an attachment produces the error above. I have seen similar errors before but when the user actually wants to send html and not a file.
Thanks a lot,
JessHI ,Thanks for your response. That was an error in the code I posted, but wasn't the error I was trying to solve. Once correcting that error you pointed out I am getting the problems not when I send a plain text email like:
if(!sendmultipart)
// send a plain text message
msg.setContent(msgText, "text/plain");
}but when I try and send multipart messages doing this:
else
// send a multipart message// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText(msgText);
// create and fill the second message part
MimeBodyPart mbp3 = new MimeBodyPart();
// attach the file to the message
FileDataSource fds = new FileDataSource(soundfile);
mbp3.setDataHandler(new DataHandler(fds));
mbp3.setFileName(fds.getName());
Multipart mp = new MimeMultipart();
//adds the text to the message
mp.addBodyPart(mbp1);
//adds the attachment to the message
mp.addBodyPart(mbp3);
// adds the content to the message
msg.setContent(mp);
}So i get the error when executing the else branch.
Can you spot any errors here? I get the same error as mentioned earlier.
Thanks a lot,
Jess -
B2B - Email with XML attachment - Error in reading the xml file
Hello,
We have a requirement where an application sends an email with an xml attachment to a Lotus Notes (IMAP) mail box. I have configured the Partner, Agreements and Listening Channel to pick up the file from the mail box. Looks like when B2B is trying to read / store attachment, it errors out, there is no instance in B2B created. Looking at the logs, the file content is not read as XML, instead it seems like a text. When B2B tries to read the attachment it is not xml, there are no error messages as well.
The "Content type" in the Listening Channel is set to blank, so B2B can decide appropriate content type. Should this be set?
Could some one tell me what is wrong, not sure what is missing in the configuration.
Thanks,
Venkatesh
Here is the log in Trace 32.
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: Delivery channel Id:CHANNEL_uGzsvLy-5972197188599763240
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = host value = abcapp1.abc.com
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = password value = ******
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = user value = IDropshipabcTest
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = polling_interval value = 60
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = content-type value = null
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = send as attachment value = null
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = folder value = null
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = email-id value = [email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = subject value = null
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = dateformat value = null
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: name = eMail-server value = IMAP
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: getReceivingEndPointList: Putting imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [NOTIFICATION] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [APP: soa-infra] Repository:: put: Putting imap://[email protected] for delivery channel CHANNEL_uGzsvLy-5972197188599763240
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: addEndpoint: Adding endpoint...channel name abc_EmailVendor_LC
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: addEndpoint: Endpoint url imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: addEndpoint: Endpoint url imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: addEndpoint: This is NOT a listening internal delivery channel imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] TransportLogger Init....
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] TransportProperties.TransportProperties():smtp.receiver.user=IDropshipTest;smtp.receiver.polling_interval=60;channelId=CHANNEL_uGzsvLy-5972197188599763240;[email protected];user=IDropshipTest;internal=false;smtp.receiver.password=******;polling_interval=60;smtp.receiver.protocol=imap;password=******;eMail-server=IMAP;host=abcapp1.abc.com;
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] B2BTransport.init(url) Endpoint = sftp://w108p-dmzftp01:22//Dev/Local/VEN-Dropship/FoamCraft url parameter = imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] B2BTransport.init(url) Endpoint = sftp://w108p-dmzftp01:22//Dev/Local/VEN-Dropship/JoyCarpets url parameter = imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] B2BTransport.init(url) Endpoint = sftp://w108p-dmzftp01:22//Dev/Local/VEN-Dropship/JoyCarpets/OrderResults url parameter = imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: addEndpoint: Added new endpoint.
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] B2BTransport.init(url) Endpoint = imap://[email protected] url parameter = imap://[email protected]
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: addEndpoint: Exit
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] SMTPReceiver.init() started ....
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: handleUpdateChannelEvent: Exit
[2013-03-18T19:03:34.212-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@e4012] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Engine: processEvents: Exit
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.setPollingInterval: polling time 60
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] SMTPReceiver.init() completed.
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] [IPT_SmtpRecPollingStatus] IMAPMonitor is up polling at 60 sec interval ...
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.run shutdown is false, continuing
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Total number of messages = 2
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Number of new messages =0
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Number of unread messages =0
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Number of messages to be processed by IMAPMonitor = 2
[2013-03-18T19:03:34.259-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.convertMailToTransport(): Converting message ...
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.convertMailToTransport(): Message Type = BINARY
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Importance - High
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Subject - Inventory Quantity On Hand Update for 266219 as of 20130318 at 18:54
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Auto-Submitted - auto-generated
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers To - [email protected]
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Message-ID - <[email protected]>
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Sender - [email protected]
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Date - Mon, 18 Mar 2013 18:54:35 -0500
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers X-MIMETrack - Serialize by IMAP Server on abcAPP1/abc(Release 8.5.1|September 28, 2009) at[[
03/18/2013 19:03:33
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers MIME-Version - 1.0
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Content-type - multipart/mixed; [[
Boundary="0__=09BBF1A1DF10DC2F8f9e8a93df938690918c09BBF1A1DF10DC2F"
[2013-03-18T19:03:34.446-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Content-Disposition - inline
[2013-03-18T19:03:34.509-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] COntentHandler backcompat: true
[2013-03-18T19:03:34.509-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: MultiPart Message
[2013-03-18T19:03:34.509-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] COntentHandler backcompat: true
[2013-03-18T19:03:34.509-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] COntentHandler backcompat: true
[2013-03-18T19:03:34.556-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@169d2b1] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-52575d59:13d7daec7d5:-8000-000000000000d14d,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.saveAttachment(): PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID8+DQo8SW52ZW50b3J5VXBkYXRl[[
IHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiDQp4
c2k6c2NoZW1hTG9jYXRpb249Imh0dHA6Ly93d3cuZXhhbXBsZS5vcmcgSW52ZW50b3J5VXBkYXRl
LnhzZCINCnhtbG5zPSJodHRwOi8vd3d3LmV4YW1wbGUub3JnIj4NCjxEYXRlPjIwMTMtMDMtMTg8
L0RhdGU+DQo8VGltZT4xODo1NDo0NDwvVGltZT4NCjxUeXBlPiBGdWxsIDwvVHlwZT4NCjxWZW5k
b3JJRD4yNjYyMTk8L1ZlbmRvcklEPg0KPEl0ZW0+DQo8U2t1PjQ8L1NrdT4NCjxRdWFudGl0eT4w
PC9RdWFudGl0eT4NCjxDb3N0PjE1LjU8L0Nvc3Q+DQo8TmV3Q29zdD4xNS41PC9OZXdDb3N0Pg0K
PE5ld0Nvc3RFZmZEYXRlPjIwMTMtMDMtMTg8L05ld0Nvc3RFZmZEYXRlPg0KPFN0YXR1cz4NCjxT
Caused by: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)Thanks Anuj,
After setting the property, I am no longer receiving the error, however, still fails with a different error, "Exception occurs in conversion from mail to TransportMessage. Please make sure the message sent is in correct format." and "TransportMessage cannot be created from mail. Skip this mail."
The error appears after / while, executing, IMAPMonitor.saveAttachment():
Is this a problem with the attachment or the email?
here is the log,
[2013-03-19T09:16:23.264-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.run(): IMAPMonitor goes to sleep for 60 secs ...
[2013-03-19T09:17:23.266-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.run: wake up. shutdown_ = false
[2013-03-19T09:17:23.266-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.run shutdown is false, continuing
[2013-03-19T09:17:23.313-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Total number of messages = 1
[2013-03-19T09:17:23.313-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Number of new messages =0
[2013-03-19T09:17:23.329-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Number of unread messages =0
[2013-03-19T09:17:23.329-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] Number of messages to be processed by IMAPMonitor = 1
[2013-03-19T09:17:23.329-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.convertMailToTransport(): Converting message ...
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.convertMailToTransport(): Message Type = BINARY
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Subject - Inventory Quantity On Hand Update for 266219 as of 20130319 at 09:07
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers To - [email protected]
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Message-ID - <[email protected]main>
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Date - Tue, 19 Mar 2013 09:07:29 -0500
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Sender - [email protected]
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers From - [email protected]
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Content-type - multipart/mixed; [[
Boundary="0__=09BBF1A0DFDE15CA8f9e8a93df938690918c09BBF1A0DFDE15CA"
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Content-Disposition - inline
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers MIME-Version - 1.0
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers Auto-Submitted - auto-generated
[2013-03-19T09:17:23.516-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: Headers X-MIMETrack - Itemize by Agent Manager on abcAPP1/abc(Release 8.5.1|September 28, 2009) at[[
03/19/2013 09:07:29,CD-MIME by IMAP Server on abcAPP1/abc(Release 8.5.1|September 28, 2009) at
03/19/2013 09:17:21,CD-MIME complete at 03/19/2013 09:17:21,Itemize by IMAP Server on abcAPP1/abc(Release 8.5.1|September 28, 2009) at
03/19/2013 09:17:22
[2013-03-19T09:17:23.563-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] COntentHandler backcompat: true
[2013-03-19T09:17:23.563-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: MultiPart Message
[2013-03-19T09:17:23.563-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] COntentHandler backcompat: true
[2013-03-19T09:17:23.563-05:00] [AdminServer] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] COntentHandler backcompat: true
*[2013-03-19T09:17:23.563-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.saveAttachment(): AttachDir=C:\Oracle\Middleware\home_11gR1\user_projects\domains\mysoa_domain\servers\AdminServer\AttachmentHandler*
*[2013-03-19T09:17:23.563-05:00] [AdminServer] [ERROR] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [APP: soa-infra] [IPT_SmtpRecConversionError] Exception occurs in conversion from mail to TransportMessage. Please make sure the message sent is in correct format.*
*[2013-03-19T09:17:23.563-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor: TransportMessage cannot be created from mail. Skip this mail.*
*[2013-03-19T09:17:23.579-05:00] [AdminServer] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@11c2050] [userId: <anonymous>] [ecid: 54ec404c68bbfb80:-67aaafb8:13d82f27adb:-8000-0000000000000204,1:26833] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] IMAPMonitor.run(): IMAPMonitor goes to sleep for 60 secs ...*
Thanks,
Venkatesh -
Problem to send out attachment
Hi all,
This is urgent. Any advice is appreciated. I have java class to send out attachement. The program was working fine without any issues until last Friday. Suddenly, it could not send any attachment email out. I was able to send out a simple email without attachment. I did not know what changed. I ran out of resources for troubleshooting it.
Here is my code:
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
public class SendAttachment {
public void Send (String MailHost, String AddFrom, String AddTo, String FileAttName)
throws Exception {
String host = MailHost;
String from = AddFrom;
String to = AddTo;
String fileAttachment = FileAttName;
// Get system properties
Properties props = System.getProperties();
// Setup mail server
props.put("mail.smtp.host", host);
// Get session
Session session =
Session.getInstance(props, null);
// Define message
Message message =
new MimeMessage(session);
message.setFrom(
new InternetAddress(from));
message.addRecipient(
Message.RecipientType.TO,
new InternetAddress(to));
message.setSubject(
"Hello JavaMail Attachment");
// create the message part
BodyPart messageBodyPart =
new MimeBodyPart();
//fill message
messageBodyPart.setText("Hi");
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
// Part two is attachment
messageBodyPart = new MimeBodyPart();
DataSource source =
new FileDataSource(fileAttachment);
messageBodyPart.setDataHandler(
new DataHandler(source));
messageBodyPart.setFileName(fileAttachment);
multipart.addBodyPart(messageBodyPart);
// Put parts in message
message.setContent(multipart);
// Send the message
Transport.send( message );
my test program:
import java.io.File;
import java.io.IOException;
import java.io.OutputStream;
public class TestJavaMail {
public static void main(String[] args) {
String myhost =args[0];
String from =args[1];
String to = args[2];
String filename = args[3];
try {
System.out.println("Start .....");
System.out.println("Preparing...");
SendAttachment app = new SendAttachment();
app.Send(myhost, from, to, filename);
System.out.println("Success!");
} catch (Exception e) {
//System.err.println(ExceptionUtil.printStackTrace(e));
System.exit(-1);
After successful compilation, here is how I ran the class:
java TestJavaMail mymaihost.com [email protected] [email protected] /tmp/test.txt
It stops just before it calls Transport.send( message );
Any ideas are greatly appreciated.Hello,
This could help you.
http://exchangeserverpro.com/how-to-configure-a-relay-connector-for-exchange-server-2010
if the reply help you mark it as your answer.
Free Managed .NET
Word Component(Create, Modify, Convert & Print) -
Mail Sender to Abap Proxy Receiver with Attachements
Hi All,
Scenario: I need to create a ticket in Solman from a mail. I intend to do the scenario as Mail sender to Abap Proxy receiver asynchronous.
I have configured my sender mail adapter and am able to get the mails in XI. The attachements also appear in Inbound payload as MailAttachement-1, MailAttachement-2 etc. I have checked use mail packege and keep attachements in sender adapter.
Transport Protocol: IMAP4
Message Protocol: XIPAYLOAD
Queries:
1. My Inbound Data Type is the mail Package -- ximail30_xsd. Here in sxmb_moni I can see the mail attributes like from, to and the mail body in content. But How can I read the attachements in my message mapping.
2. How can I pass these attachements to Abap Proxy ( I do not need to alter attachments only pass to proxy ). These attachements have to be attached to the Solman ticket in SOLMAN server.
Appreciate your kind response to my above queries.
Thanks.
Regards,
Siddhesh S.Tawate
PS: I have tried using PayloadSwapBean in adapter module but still the content at source remains same.Hi,
Please find below the part of code that might help you. I have given code only responsible for attachements part of the ticket.
loop at lt_attach into l_attachment.
count = count + 1.
if count = 1.
first_line = 1.
endif.
l_type = l_attachment->GET_CONTENT_TYPE( ).
split l_type at '"' into l_type
file_name
l_name.
l_name = file_name.
split file_name at '.' into file_name
file_type.
l_xstring = l_attachment->GET_BINARY_DATA( ).
strlen = xstrlen( l_xstring ).
Compute int = ( strlen div 255 ).
Compute rem = ( strlen mod 255 ).
if rem <> 0.
int = int + 1.
endif.
count1 = int.
if count = 1.
last_line = count1.
else.
if int = 1.
first_line = last_line.
else.
last_line = first_line + count1.
endif.
endif.
wa_APPX_HEADERS-APPXNO = count.
wa_APPX_HEADERS-DESCR = l_name.
wa_APPX_HEADERS-FILETYP = file_type.
wa_APPX_HEADERS-FILENAM = l_name.
wa_APPX_HEADERS-FILEFM_UL = 'BIN'.
wa_APPX_HEADERS-FIRSTL = first_line.
wa_APPX_HEADERS-LASTL = last_line.
wa_APPX_HEADERS-FILELEN = strlen.
wa_APPX_HEADERS-LAST_USR = sy-uname.
GET TIME STAMP FIELD wa_appx_headers-TIMESTAMP.
append wa_APPX_HEADERS to it_APPX_HEADERS.
while count1 <> 0.
count1 = count1 - 1.
if count1 <> 0.
wa_APPX_LINES_bin-LINE = l_xstring+0(255).
shift l_xstring left by 255 places in BYTE MODE.
ELSE.
wa_APPX_LINES_bin-LINE = l_xstring.
endif.
append wa_APPX_LINES_bin to it_APPX_LINES_bin.
clear: wa_APPX_LINES_bin, wa_APPX_LINES.
endwhile.
first_line = last_line + 1.
clear: strlen, count1, file_name, file_type, l_type, int, rem, l_xstring, l_attachment.
endloop.
CALL FUNCTION 'BAPI_NOTIFICATION_CREATE'
EXPORTING
NOTIF_EXT = wa_NOTIF_EXT
NOTIF_CRM = wa_NOTIF_CRM
IBASE_DATA =
IMPORTING
NUMBER = Refnum
NUMB = Numb
REFNUM = Ticket_No
SYSID = SYSID
TABLES
NOTIF_PARTNERS = it_NOTIF_PARTNERS
NOTIF_NOTES = it_NOTIF_N_EXT
NOTIF_SAP_DATA = it_NOTIF_SAP_DATA
NOTIF_TEXT_HEADERS = it_NOTIF_TEXT_HEADERS
NOTIF_TEXT_LINES = it_NOTIF_TEXT_LINES
APPX_HEADERS = it_APPX_HEADERS
APPX_LINES = it_APPX_LINES
APPX_LINES_BIN = it_APPX_LINES_BIN
RETURN = RETURN
Please observe how first and last line of attachement is calculated. That is what created problem for me initially.
Hope this helps.
Regards,
Siddhesh S.Tawate -
How to send soap attachment without SAAJ
I have to send XML or text file as an attachment in the web service, just like email attachment. Currently I am intercepting the SOAP message (sent from web service client) and then adding an attachment using SAAJ. Can we send an attachment without intercepting and SAAJ in netbeans just like how we send other data (with basic datatypes ) as parameters to the web service operation ?
TIA.Soap is a protocol that runs over TCP (sockets.) You can build the entire soap message by hand if you want to.
That said adding something is dependent on the fact that the other side will consume it.
Maybe you are looking for
-
Read only access for a Database!
Hi All, I need to create a user for my database who can have readonly access to the database and can work as *"Read Only Apps".* Senario:-* I want to give access to development team through TOAD/ SQL* but that user can not delete/update any thing fro
-
Sharing multiple external hard drives running multiple OS's on AEBSn
Hi, I was hoping someone on this forum can help with this. I've been primarily a PC user but have converted to Mac thru a MBP. I purchased the AEBSn with the hope of having a networked storage solution for this mixed OS setup. The plan was to have mu
-
What should we call the new iMac G5 ?
The first G5's are referred to as Rev. A The next were Rev. B I like what OWC calls the new iMac's, "iMac Slim" Any other good names?
-
Help.... how can i see who is connected to my itunes
Hey, i am more then happy to allow people to connect to my playlist but i want to know how is it possible to know who is actually connected not just how manny people. Thank You
-
X121e bios does not save changes any more
I wanted to boot with a USB drive but did not succeed (system configuration see below). The ThinkPad showed me the USB drive but did not boot. I tried changing the BIOS boot order but the BIOS does not save any changes :-( Changing the boot order and