Send Back For Correction in Travel Request

Hi All,
I have one issue , Actually I am customizing the standard workflow WS20000050 .
Here all the things are working fine.
But when manager is selecting "Send Back For Correction" , it is going to Requester
And when requester is submitting by correcting it , the work flow status is showing an Error.
And when i am checking the log , Its status is showing Completed.
Its Graph
But in general manner , it should go to Approver but its not.
Please help me. Any kind of help will be admirable.
Thanks & Regards
Gaurav Singh

Hi Gaurav
the message on the last step is quite vague!
In the above, click on the "Container" tab and see if you have any detailed message in the Return container element.
Also, do you see any error in step history of the main workflow (the top level line)? Any entry in the technical log showing a RED Error Icon?
Maybe that error has some more details!
Do give a screen shot of the above two.
Else, try to debug -> Go to SWO1 -> Supply BO BUS2089-> Test -> Click on Instance Button -> supply the same Employee number and Trip Number to instantiate the object and then debug the Method ChangeInteractive. This is the method behind the step above and can give you details of what is happening there.
Regards,
modak

Similar Messages

Send back for Repair? Heat. Firmware. RAM.

Any experienced MacBook Pro users out there who can help me with my situation?
1. Brand new 17" MacBook Pro arrives (after waiting over a month from MacMall) and I install 1GB of EdgeCorpTech RAM, run Software Update, and install Final Cut Studio 5.1 (Universal) and run Software Update again.
2. Start working and during an encode in DVD Studio my brand new expensive Mac crashes. Tried about 7 times over and over again, each time either rebooting or hard locking.
3. The heat! The area above the keys is so hot you could burn yourself. The more it works, the more it heats. I hear no fans trying to cool it down, but then they might be very quiet. (I've heard the fans in an older PowerBook, and they are really loud. Are these supposed to be similar?) I've read a lot about this issue, and thought it might be why my system was crashing. I've also read that it's a "feature" where it acts as a heat sink. When I called Apple, they asked me a bunch of questions like they were taking a police report, and told me I needed to send it in for repair, but I would like to avoid doing that. If it runs this hot and the surface is a heat sink above the keys, I guess I'll just put up with it; when you're cooking you keep your hands off the frying pan! Think different, right?
4. I removed the 1GB of Edge RAM and no more crashes. It successfully encoded and it seems to be working, but the heat issue remains. I'm sending in the RAM for exchange. (Now I'm reading that someone else had this issue and that it may be the system having 2GB installed, regardless of the brand. I'll be able to test this in a few days when I get the new RAM.)
5. I puchased this Mac for a job, so I really don't want to be without it since I lost money waiting for it to arrive. Not only would I have received my order weeks ago had I ordered it from Apple, but Apple tells me they would have sent me a new one since I'm having this type of issue. Since I purchased it from MacMall, however, I was told I needed to contact them about it. I did, and MacMall is horrible. They tell me they have a "no return policy" on this. So they charge me brand-new price for a system that may need to be refirbished? They told me I needed to contact Apple. That's the last time I order from MacMall.
6. Apple sends me a shipping box to send it back for repair. I will be without it for 1-2 weeks. They also tell me I can go in and speak to a tech at one of their retail stores. I call the store to see if there's a tech available and they tell me I would need to come in to find out. Sheesh.
7. I'm hearing that a firmware or SMC update may do the trick. I have the following now:
Boot ROM Version: MBP12.0061.B00
SMC Version: 1.5f8
I called Apple support back 3 times and spoke to 3 different people. So far no one at Apple tech support has been able to tell me if I have the latest version.
To recap, my questions are:
Is this kind of heat normal?
Do I have the latest firmware?
Should I have it repaired?
If so, should I send it in or take it to the Apple Store?
Any help would be appreciated. Thanks!
MacBook Pro 17" Mac OS X (10.4.6)

Thanks, people.
I'm worried about sending it back not just because I'll be without it but also because I've read horror stories about how they ding it up during repairs.
Do firmware updates go through Software Update? I've heard they don't, and if there's a new version my Software Update is not finding one. I can't find any info on the Apple site, and Apple Support reps don't know either.
If the heat is more of an issue with me than it is with the system, I can put up with it. Since the Apple Support reps can't even tell me what the latest firmware version is, perhaps they don't really know how hot the 17" MacBook Pro is supposed to run..?
When I ran the hardware test before, I didn't notice the fans running at full blast. I usually notice that sort of thing. Maybe my fans are not working. I will run the test again and make sure to pay more attention. Does anyone know if the fans on the 17" run more softly than the others? Also, to notice this, would I need to run the full test or just the quick one? I'll try both...
Thanks again for all your help and advice...

Send back for upgrade

Is it possible to send back a laptop for an upgrade - e.g. more ram, faster harddrive, backlit keyboard?
This question was solved.
View Solution.

Hi,
Are you talking about buy a new machine ? The total cost to upgrade RAM, HDD and a backlit keyboard plus labor cost may cost more than buying a new machine IF you sent it back to HP. You can upgrade RAM, faster HDD yourself but just forget about a backlit keyboard at this stage.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Phone doesn't turn on, solid red light, requires send back BUT I have a request.

I've essentially figured out that my Z10 needs to be returned for some sort of warranty / repair, however I'm really hoping that we can request that the data on the phone be saved rather than it just be lost forever. Is this possible? There are many important notes that haven't been backed up.
Symptoms: Phone doesn't turn on, red light comes on solid for a few minutes and then turns off. Connecting it to a computer doesn't result in anything (no computer connection, no change in phone).
I am with Bell, and I even live in Kitchener (I could personally drop into BB to sort this out) I wanted to check here as a last resort before sending it back.
Thanks!

Hi and Welcome to the Community!
I used these steps from Geek Squad and it worked for me.
Restore BB10
When a BlackBerry 10 device is only flashing the red light and refusing to boot up, this indicates that the device’s operating system has become corrupted. The flashing light may follow the pattern of 1, 2 or 3 short blips, with a longer pause between the sets.
In order to fix this, you need to re-install the operating system on the device, which will then set the device back to its original factory state.
Please note: this process will completely wipe your device, so please make sure you have a backup of your personal information available to restore before going through this process.
Download and install the latest version of BlackBerry Link for your computer.
Open BlackBerry Link software.
Plug in the BlackBerry device using your USB cable.
At the bottom left of the program, find the device you're having issues with and select it by clicking on it.
The BlackBerry Link application will then ask to either reconnect or reload the device software. Choose Reload.
Confirm the reload when prompted to do so, which will wipe clean any data previously on the handset.
Allow the reload to complete, which can take some time. Whilst this is underway, the device will have a solid green light. This process of downloading and reinstalling the device can take an hour or more, depending on the speed of your internet connection, soplease don't disconnect the BlackBerry until the process has finished.
Once the restore is complete, simply set up your device again, or restore it from a previous backup stored on your machine. However, if you want to restore a previous backup, remember to sign in to your BlackBerry ID on the device first! If you're not sure how to do this, we have a full guide available.
The good news is, this process is almost identical on both PC and Apple Mac. Simply follow the same process as above. Finally, if you have any questions, please don't hesitate to get in touch with us.
VIA | nakumba
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-dead-red-light-blinks/m-p/2478589/highligh...
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Please send instructions for correct way to UNINSTALL Firefox 5.0 and REINSTALL Firefox 3.6.3 and preserve all my cookies and bookmarks. DPGannon at sbcglobal dot net

Very simple: I do NOT want to use Firefox 5.0. I did not intend for it to be installed on this computer and need to get rid of it and go back to Firefox 3.6.3. Please send instructions on how I can do that without loosing my cookies and bookmarks.
I have been a fan and supporter of Mozilla and Firefox from the very beginning, but this latest release that appears to be a way to look like Google Chrome (that I hate) has me just about ready to hold my nose and go back to IE.
What were you guys thinking?????
Thank you.
DPGannon at sbcglobal dot net

Install the following Add-on until Google releases a new version of their toolbar that is compatible with Firefox 5. Google needs to test their toolbar with Firefox 5 and change one line in their code to make it compatilbe. Most Add-ons that worked with Firefox 4 should still work with Firefox 5, but the developers need to update a line in their Add-on's code to indicate with which versions of Firefox the Add-on is compatible. The following Add-on adds a "Compatibility" button in your Add-ons > Extensions that you may need to click after installing it and restarting Firefox.
*Add-on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/15003

Return For Correction-EIT

Hello All,
We have registered an Extra Information Type and enabled security for Employee self service responsibility.Every thing is working fine except return for correction feature. Approver is able to return the notification for correction but when requester opens the returned notification and clicks on "Continue Action" link, he is not able to see the information type and getting note as "Under your current responsibility, no information types are available for this person"(May be this page is defaulted to some responsibility other than Employee self service ). He is not even able to see "Switch responsibility" list of values.
It seems i have missed something during setup. Kindly share some ideas to fix this issue and let me know if you need more information(Note that i am very new to this forum and this this my first thread)
Thanks
Dileep

In actual it should update only that SIT record which is currently under consideration and not allow other records to modify.Ayaz
this is a very valid question .. and same thing happens with EIT as well. This happens because when you create or update EITs, SITs you can do more than one at a time at the time of creation/ updation. So when approver go to update action or send it back for return for correction you create/ update multiple EITs and SITs as all of that go in single transaction.
Let us know if you find any solution for this one.

How can MDB send back a feedback to the client?

Hi colleagues, I have made a client which sends a text message to a MDB. Before sending, I have created a queue for replay messages and I have this piece of code:
               txtMsg.setJMSReplyTo(replyQueue);
               msgID = txtMsg.getJMSMessageID();
               qReceiver = qs.createReceiver(replyQueue);
               qSender.send(txtMsg);
               qc.start();
               receivedMsg = (TextMessage) qReceiver.receive();
So the question is, how to send back from the MDB to the client a message if I already have this code in the MDB:
String msgID = msg.getJMSMessageID();
               Destination destination = msg.getJMSDestination();
               String txtMsg = ((TextMessage)msg).getText();
               String sender = (String) ((TextMessage)msg).getObjectProperty("JMSSender");
I wanna send back for example, the messages' ID.
thanks in advance!

I thought MDBs did not have clients.An MDB can have pretty much whatever it wants :). Its a very common requirement for an MDB to talk to a database, talk to an EJB or send new messages to some destination or combinations of all of those things.
James
http://logicblaze.com/

Customer not ready to send free of goods back But he wants money back for damaged stock

Dear sd Experts please tell me How To Achieve In SAP
Customer : 120000
Company: AAA
AAA Company offered if customer purchased Material ZZZ For 100 qnty They will Give Free of goods Material XXX 15 For Diwali
: ex: Now customer Purchased 100 qnty and he got 15 Free of goods from the company Now This scenario ok Imagine stock reached just one day before DIWALI suddenly Customer Found some damaged stock Like 10 Items
now he wants to back the stock and he doesn't want the same material 10 Items (zzz) He wants only Money
because Once DIWALI Completed he cant sell the products he will be in loss ( i am giving just example to understand)
so he wants money back .....................For 10 Qnty
But he is not ready To Give back Free of goods Back (XXX) Because He purchased the stock From the company is giving free goods thats way
Yes it is correct point From the customer side because every customer will think like this only no wrong with him ...
Now coming to Company issue .... Company everything calculated material cost and finally decided That 100 Material ZZZ We can give XXX 15 Material As a free of Goods here no loss and no profit
But if customer Is asking Money back for Damaged stock and he doesn't want To give free of goods back ,,, So here from company point of view some loss will be generating definitely..100 % so how we will proceed with FI @MM IN SAP
Because I think another option plz guide me
Thanks a lot

Dear Venu,
As i understood On a purchase of 100 TVs--10 DVD players are free(may be 10+1 offer)
Now after receiving customer found 10TVs damaged
(only TVs got damaged--not the free good DVD players)
So he returned those damaged 10 TVs back to Business and he dont want to take this new 10 TVs based on his sales after his seasonal experiences.
So now the adjustment can happen in the following ways:
(solely depends on your understanding with your customer)
1.Adjust the total amount only for 90 TVs(you can use credit memo else invoice correction request)
2.here the question comes is for 90 TVs only 9 DVDs are free--(here again you can do in two ways charge the customer by a debit memo for additional one piece of DVD player or ask the customer to return that one DVD player)
Hope this helps.
Very Important note:
I just saw somebody asking you to correct your punctuation and there is a like given by Our senior and respected member JP. we have to understand one thing here--always we need to take these comments as positive manner(recently our respected moderator JP cautioned me too through a direct message asking to correct my diction and some spelling mistakes--which i might be doing without any intention)
Remember one thing in life--- all of our respected senior members are here to help us whenever we are facing career threatening issues--even though they dont know us personally --they are helping us & we come out with victory and smiley faces from all these issues--we should respect their comments and say thanks to the people who is correcting you at your career.
To Respected JP: sir--i think you might have observed the change in my approach too
(like ""me too"" at your message)
whenever i am crossing-- requesting you again to correct me.
sorry to give this pain again to you sir.
Regards
Phanikumar

In what all ways travel request can be sent to superior for approval and how?

Hi Guru's,
Greetings for the day!
Could anyone let me know configuration settings about sending travel request to superior for approval.
During research on same learned that i need to have SAP Communication interface set up which i got done, However i am having hard time to know on which screen it gives option to send travel request to superior for approval, If there is anything more there that needs to be done on configuration front please suggest.
Best Regards
Girish

Hi Mathieu,
Thank you for your reply, I am new to this travel management module and moderately aware of process flow, Let me give you as much as information as i can to help you understand better.
First thing first, It is SAPGUI scenario, We have reached configuration settings level where we can create travel request and have integration with travel expense manger, below image talks about sending email to superior for approval, However as instructed in below image once i select travel request from overview area and choose change option, it does not give me mail send option(3rd point on procedure) or rather what should i do to get that option.

Reject Travel Request (Enter and Send Msg Error)

Hi Experts.
I Copied standard workflow for approve travel request, and add a decision control to know whether is national or not. It seems that runs fine, but when the user choose to reject the request, the screen of "Enter and Send Msg seems to open" but in a blink the screen disappear. I checked agents, standar task 20000139 but i can't find any error.
Any Suggestions,
Thanks a lot,
Steve.

What is the Status of the Workflow. Is that particular task TS20000139 got executed?
If it gets completed without any user action then this activity step might have some condition that is activated in the condition Tab of activity step.
Thanks
Arghadip

ABAP Webdynpro component for travel request - customization

Hi All,
In EHP5 ESS Travel Management - Travel expense creation - I want to prevent users from raising the travel expense only after the travel request is approved.
For this requirement , ie to modify the FITV_POWL_TRIPS - In this component either i want to disbale the link create /change in travel expense colum if the travel request is not approved or i want to give a error message on click of travel expense report if the corresponding travel request is not approve.
If any one has done please let me know how this can be done . If with customising the code is there any way through spro config this can be controlled.
Thanks
Thanks & Regards
Shyam

You can use P_TRAVL authorisation check for the status field
Read here
http://help.sap.com/saphelp_46c/helpdata/en/b6/cda0db49e911d189060000e8322f96/content.htm
Please kindly read the note 574467. We deliver the BADI
FITV_PERSNO_AUTH_CHK empty and we provide a documentation on how
this should work. In your case you should modify the BADI to check your
multiple structural profile but on how to do this depends on your
modification.

Populate Error Message while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee

Hi Team,
We have a requirement to "Populate Error Message(Supervisor not Maintained) while submitting Travel Request if Supervisor(A002) relationship is not maintained for employee in ESS.
We are using standard WDA application - FITV_REQUEST and standard travel request workfow - WS20000050.
Please suggest how to do this.
Thanks,
Ravi

Hi Rajesh,
Thanks for the reply...
We created enhancement for FM HRTRV_IF_GET_CUSTOMIZING and written code in that.
So by this if Logged in Employee is not assgned with Line Manager , it will throw error while accessing "Create Travel Request application".
Thanks,
Ravi.

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
http://www.apple.com/contact/
B-rock

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

Send Back For Correction in Travel Request

Similar Messages

Maybe you are looking for