Send connectors question

Hi There,
we have the 2 Ad sites and each site has the exchange server 2010 sp2 (HUB.MDB,UM and CAS). i want to route the messages based on Sites via each separate send connector. I would like to know send connectors use exchange cost routing to route the messages
Many thanks
David

Under the send connector properties, scope it and then set the smarthost on each send connector to what you want. I assume that is what you are referring to.
Note that there is *no* native source based routing in 2010.
If you need source-based routing:
If you want to use sender based routing in Exchange 2010, use an agent:
http://routingruleagent.codeplex.com/
or 3rd party software:
http://ivasoft.com/routebysender.shtml
http://grahamhosking.blogspot.com/2011/05/exchange-2007-2010-sender-based-routing.html
http://technet.microsoft.com/en-us/library/aa997285(v=exchg.141).aspx
Scoped send connector By default, all Send connectors that you create can be used by all the Hub Transport servers in your Exchange organization. However, you can limit the scope of any Send connector so that it can be used only by other
Hub Transport servers that exist in the same Active Directory site. To limit the scope of this Send connector, select
Scoped send connector.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

What are the correct Send Connectors settings in Exchange 2013

Hi
I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles. I am trying to set the send connectors settings, because I've not been able to send nor receive external email via owa. Since I'm separating the exchange roles, my mailbox
servers only use internal IP settings and cannot resolve external DNS. I'm thinking I need to tick, proxy through CAS for it to work? any suggestions?

Hi
Can you please let us know what version of Exchange that you are using
"I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles"
- Because Exchange 2013 does not hold hub role.
" I am trying to set the send connectors settings, because I've not been able to send
nor receive external email via owa."
It would be great if you could answer few questions so that people can help you out here
Are you able to send emails internally without any issues with Outlook ? If not can you paste the errors.
What error you are getting while trying to send emails through owa . Can you paste the errors.
If you are looking for steps to create new send connector please follow below technet article
http://technet.microsoft.com/en-us/library/aa998936(v=exchg.150).aspxFeel free to post your comments/errors you received to proceed
further
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Exchange 2007 Smarthost send connector backing up

I have seen some similar posts to this but none have had any good answers.
We route all outbound mail through an Barracuda spam/virus appliance. We are a busy college campus with roughly 2k staff banging away at our mail gateways with mass mailings to our students, homework assignments, class schedules, blah blah blah..
At no time is our outbound mail queue empty. The trouble is, is that at any given time the most "Active" delivery status messages I see in queue viewer is 6 messages. Whether there are 30 or 5000 messages stuck in there it never try's to send
more than 6 at a time.
Sometimes the queue viewer shows no "Active" connections just all "Ready's". I never see the status change to "Retry" or anything else other than "Ready" or "Active".
We often have delivery delays of 3 or 4 hours when mass mailing messages that do not exceed more than 10 to 20k.
Here is what we've tried so far:
In Powershell use: get-transportserver | fl   (to view these)
and use: set-transportserver -ConfiguratorName (to change the values)
updated MaxConcurrentMailboxDeliveries to 50
updated MaxConcurrentMailboxSubmissions to 50
updated PickupDirectoryMaxMessagesPerMinute to 200
MaxConnectionRatePerMinute 1200
MaxOutboundConnections 1000
MaxPerDomainOutboundConnections 1000
"...MaxMessageAttachSize" 100MB (For testing only)
use: get-sendconnector | fl    to verify the value of "MaxMessageSize". Ours is set to unlimited.
use: get-transportconfig   to check all the "Max" settings in there particularly the MaxDumpsterSizePerStorageGroup setting. Ours is 125MB.
Protocol logging is set to Verbose on the send connector. There are no error messages in the send or connectivity logs. The "Microsoft MailFlow Troubleshooter" is a joke.
We have no throttling turned on at the Barracuda level, so says their tech support. I of course have no way of verifying this as I do not have access to it.
I guess my question is. Does anyone know how or where we can increase the number of "Active" messages in the queue to more than 6 messages?

On Thu, 16 May 2013 20:19:55 +0000, Elvis P. Johnson wrote:
>We route all outbound mail through an Barracuda spam/virus appliance. We are a busy college campus with roughly 2k staff banging away at our mail gateways with mass mailings to our students, homework assignments, class schedules, blah blah blah..
>
>
>
>At no time is our outbound mail queue empty. The trouble is, is that at any given time the most "Active" delivery status messages I see in queue viewer is 6 messages. Whether there are 30 or 5000 messages stuck in there it never try's to send more than
6 at a time.
You're sending all mail to a single smart host? I'd be looking at that
machine's configuration.
>Sometimes the queue viewer shows no "Active" connections just all "Ready's". I never see the status change to "Retry" or anything else other than "Ready" or "Active".
You have only one queue, for the smart host, right? Is there a "Last
error" value for it?
Are there any "back-pressure" events in the server's application event
log?
>We often have delivery delays of 3 or 4 hours when mass mailing messages that do not exceed more than 10 to 20k.
[ snip ]
>Protocol logging is set to Verbose on the send connector. There are no error messages in the send or connectivity logs. The "Microsoft MailFlow Troubleshooter" is a joke.
>
>We have no throttling turned on at the Barracuda level, so says their tech support. I of course have no way of verifying this as I do not have access to it.
The barracuda has DOS protection. I *think* the default is to limit
the number of "parrallel connections" to 5, but that may be different
on different models. There are probably other "rate limiting"
settings, too.
>I guess my question is. Does anyone know how or where we can increase the number of "Active" messages in the queue to more than 6 messages?
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

Send connector in different costs

Hi,
All my exchange 2010 servers are in 1 single AD site.
It seems not working when I configured item no 2.
1. address => *, source server => hub A, cost => 1
2. address => *, source server => hub B, cost => 100
It is working if I joined Hub A & Hub B under send connector source server. This configuration will send via HUB A or HUB B.
My objective is to send to cost 1 as 1st proity. Any additon configurations are needed?
P/S: I was using this following for DR MBX and DR HUB
Set-MailboxServer -Id: mbxserverA-SubmissionServerOverrideList: htserverB,htserverC
Question: is it for all send and recived connectors?
Please advise. Thanks.
Kelvin Teang

Hi,
Exchange must bind the send connector to a specific hub transport server in your Exchange organization. By default, Exchange chooses the server that you are creating the connector on, but you do have the option of specifying a different hub transport server.
To meet your requirement, you should join both Hub A and Hub B under source server.
About SubmissionServerOverrideList, Exchange Hub transport Server will be automatically load balanced within the Active Directory Site. Hub Transport Servers are load balanced in Round robin fashion within the Site. If you want to force Exchange Mailbox
server to use specific Hub Server you need to make use of SUBMISSIONSERVEROVERRIDELIST.
"Set-MailboxServer -Id: mbxserverA-SubmissionServerOverrideList: htserverB,htserverC"
The command above will set Mailbox Server mbxserverA to use htserverB and htserverC for mailsubmission.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange send connector

might be i am going to ask funny question , i am creating new send connector ,use domain name system(DNS)''MX records to route mail automatically .....it seems hidden i am not able to select

Hi LUV.P,
As Robert suggests, would you please let us know more details for this issue?
Based on your description, I just understand that the
Use domain name system (DNS) "MX" records to route mail automatically
option can be selected. I’m a little confused with “Hidden” that you descript.
By the way, if you use Set-SendConnector cmdlet, can configure successfully?
If any update, please feel free to let us know.
Best regards,
Justin Gu

Exchange 2007 Send Connectors

Hello,
I'm relatively new to administering Exchange and I had some questions on Send Connectors. We send mail to a few different domains that usually 75% of the time will generate a message saying:
Delivery is delayed to these recipients or distribution lists:
This message has not yet been delivered. Microsoft Exchange will continue to try delivering the message on your behalf.
Delivery of this message will be attempted until 1/9/2014 9:31:13 AM (GMT-05:00) Eastern Time (US & Canada). Microsoft Exchange will notify you if the message can't be delivered
by that time.
Sometimes messages will make it to the intended recipients and other times not. Most of the time they are just regular emails without any attachments on them. I'm not exactly sure how connectors work, but I'm thinking that I can set one up to tell exchange
that it should route these certain emails to that domain. Is this the correct thought process on how a send connector would work and are there any ramifications I need to worry about if I set up a second or third send connector?
I apologize if this is naïve or doesn't make sense. Please let me know if you need more information. We run Exchange 2007 on Windows SBS 2008.
Thank you.

Hi,
It seems that it could be a reverse DNS lookup issue. I recommend you check if the reverse DNS record is configured correctly.
If it is ok, I suggest you enable logging at your send connector. Then check the log to see if you could find some clues.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2007 send connector does nor respect Maximum message size (sometimes...)

Hi to all
We have 9 email server, 5 Mailboxes, 2 CAS and 2 HT, We began to have problems to send and receive from internet; so I checked the queues and I discovered that some users are sending messages with a size greater than 16 MB, althought internally can send
until 40MB, if they send externally, only until 16MB.
I revised all the configuration:
Organization Configuration/Hub Transport/Global Settings/ Maximum send size (KB):40960
Server Configuration/Hub Transport/HT01/Receive Connectors/Default HT01/Maximum message size(KB): 40960 (only this server can send outside, the other server is in spare)
Organization Configuration/Hub Transport/Send Connector/SendMailOuside/Maximum message size(KB) 16386
We send by an Smart host that is used only by the HT01 to a Symantec server.
With this, we have this situations:
In the queue, I see some users are sending emails with a size more than 16MB outside the organization, I revised their configuration and the "maximun send size" is clear the checkbox (just like my account), the weir is if I try to send an email
with a size more than 16MB, I got the message: "#550 5.3.4 ROUTING.SizeLimit; message size exceeds fixed maximum size for route ##", this is not sense because their account configuration is the same like mine, so the Exchange must not let
them to put the email in the queue...
If between internal users try to send an email with size more than 16MB, this is allowed and it's send without any problem
So I don't know where is the misconfiguration, is permited to send mails with size less than 40MB internally, but externally only until to 16MB, but I din't know why the Exchange system let some users to send (or at least put in the queue) this kind of messages,
my account is in the same DB like the other users...
I hope to be clear in the description of the situation, maybe a patch or some thing, the HT server has the January patch and in april will be applied the last patchs.
Doc MX

Hi DocMX,
Thank you for your question.
We could run the following command:
Get-TransportConfig | FL max*size
Then, we could check the send connector by the following command:
Get-SendConnector | FL Identity,MaxMessageSize
We could run the following command to check an individual user maximum size.
Get-Mailbox <username> | FL Name,Max*size
In my solution, we could rebuild the user profile that those users could send emails more than 16MB to check if the issue persist.
We could also restart the service of “Microsoft Exchange Transport”.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Exchange 2010 - Send Connector High Availability

Hi All,
I performed a successful migration a few years back from a single node Exchange 2003 server to a two node Exchange 2010 organisation with a DAG and Kemp load balanced CAS array. The solution works well and when we simulate a site failure
I am able to get the second node to handle all mail functions.
The one problem I have though is that I have to manually disable the send connector on the primary server in order for the one on the secondary server to be in use. I should explain that I have two send connectors as I do not want the secondary server
to be used unless the primary server is down or the route is unavailable. I realise that Exchange 2010 does not know whether the SMTP route is down or not so will just continue trying to use the send connector from the primary server (until I tell it
not to by disabling it).
My question is how do I get this to happen automatically? Does anyone else have an example of how this could be done or use a PowerShell script to achieve this? I guess a script could check the route and disable the send connector on the primary
server if necessary, but how would one do this?
Any help greatly appreciated.
Rob

Hi,
According to your description, your secondary send connector cannot be automatically used when the first one is down. If I misunderstand your meaning, please feel free to let me know.
If yes, I’d like to confirm if the settings of the secondary one is same with the first one and we can check the connectivity logs including diagnostic information for Healthy Server Selector.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff634392(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

Send connector for forwarded emails not being used by Exchange 2013

Hi we have 3 Exchange 2013 CU5 servers in a DAG setup and need to forward emails for some of the users to another domain. The problem is our outgoing spam filter seems to quarantine a lot of these emails which are not spam. The problem is that I
created a send connector for the domain we are forwarding to (say contonso.com for illustrative purposes). Gave the send connector the name contonso.com, selected use MX record (didn't select Use the external DNS lookup settings on servers with transport
roles) and added contonso.com in the address space gave it cost of 1. Added all the exchnage servers under source server. And clicked save. I then changed the cost to 2 on the main send connector with the domain as * which goes trhough our oput bound spam
filter yet email I send to one of the recipients with a forward inplace still go through that connector. Can anyone tell what i'm doing wrong or explain why this wouldn't work as expected ?

Easy question, did you enable the connector? :)
Do you have more than one site in your org?
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Send connector from exchange 2007

Currently since I have both environments up, I see that Exchange 2013 is using the send connector that was created in my exchange 2007 environment. Will this send connector go away once I bring down my exchange 2007 environment? Shoould I create
a new one for Exchange 2013?

Hi
From what i have seen running ex2010 and upgrading to 2013 it stayed (exchange 2013 is clever :-)). you can just modify your send connector and make sure that the settings are for your exchange 2013 server.

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

How to create send connectors for multiple sites in the same domain?

Current Scenario:
We have 2 offices, 1 in London and 1 in India. Both are in the same domain and are connected via VPN. Both have their own separate Exchange 2003 server. Each location sends out their mail via the Default SMTP Virtual Server on their exchange server through
their local ISP. There are no Send connectors created currently.
We have now installed an additional Exchange 2010 server with Hub, CAS and Mailbox roles at the London site. Internal mail flow between the sites seems to be working fine.
I believe the Exchange 2010 needs a Send connector to send out mail to the internet. However as soon as we create a Send connector on Exchange 2010, mail from the older 2003 servers at both sites start to flow out from the exchange 2010 server. This is not
optimal for our India site since their outgoing mail now has to flow via the VPN to London and out via the new server.
How can we configure it so that each server sends outgoing mail independently?
Thanks

Hi,
In India site, you can create a SMTP connector which point to the local ISP.
Thanks.
Niko Cheng
TechNet Community Support

Hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail

hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail
New mail that I want is [email protected]
Alternative to the Old one

From King Penguin
If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

Configure send connector for exchange online protection

Hello Forum members,
I am trying to configure send and receive connectors for Exchange 2010 to route
on-premises mailboxes to Exchange OnLine Protection. The "help" info MS provides
is for Ex 2013 - and the EAC GUI and config does not lend a close fit to using the 2010
Exch Management Console. How can I configure connectors to properly connect to the Exchange Online Protection?
I have seen where the ip addresses are posted, etc. I am unclear how to configure the properties on the SBS 2011/EX 2010 server.
Any tips will help,
Thanks,
Eric H.
Network and Server Installs

Hello Wesleyhe,
You cannot use AD anything with EOP - if you mean exchange on-line protection.
you have to set a smart host on the SBS server to connect to EOP, you may need to add the EOP server ips to your network config
on the SBS server. the smart host line (for the send connector on SBS server) is something like: yourdomainname-com.mail.protection.outlook.com.
Then you need to configure the outside ip for your SBS server access in the EOP admin area.
Hope this helps.
eholz
Network and Server Installs

Send connector and recieve connector

i recently figure out that send connector and reciece connector are not at the same level in EMC, why should it like this
if it is different, then please point me out some known issues about configuration about them

Hi,
In order to resolve the problem more efficiently, could you please explain in more detail?
If there is any update, please feel free to let me know. I'll be glad to help.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Send connectors question

Similar Messages

Maybe you are looking for