Send e-mail to Vendors when Close Bid Invitation

I have a issue with SRM.
In Process BID Invitation, when the Bid is close by the button action "Close", Is possible to send an e-mail to the selected vendors, advising them about the closure of the BID invitation? Can I do this thru any BADI or another solution?
I think that in Auction, when I CLOSE them, an email is send to the vendors. Am I correct about this?
Can anyone please tell me how I can solve this problem?
This problem can be the Configuration? Is a SRM Problem or ABAP Problem?
Modaration Please, if this question is an incorrect forum, check and move to the appropriate.
Regards and tks a lot!
Edited by: Edgard Henrique Balam on Oct 29, 2008 8:21 PM

Hi Henri,
This blog may be useful for you.
I think it is possible if you have event which you desired
Bidder Alert Notifications
You can try.
Muthu
Edited by: Muthuraman Govindasamy on Oct 31, 2008 5:55 AM

Similar Messages

Need an enhancement after releasing a PO Need to send a mail to vendor

Hi all,
I am having a requirement that, need to send a mail and attachment whenever a PO get released.
Can anyone help to find the enhancement for to write the code to send a mail to vendor.
Regards.
Ranganadh.

Hi,
To send a mail when a new PO is created.
can be achievd by using class cl_bcs and BADI method
IF_EX_ME_PROCESS_PO_CUST~POST of BADI ME_PEOCESS_PO_CUST.
We can aslo configure the OUTPUT TYPE as MAIL in transaction NACE. This is usually doen by the Functional consultant.
Pls look into these exapmles which clearly explains abt the process of sending a mail-
Sending Mail using class cl_bcs
Re: Mail sending program
Re: SCOT and FM 'SO_NEW_DOCUMENT_ATT_SEND_API1'
Reward if helpful.
Best Wishes,
Chandralekha

How to send e-mail notification automatically when a record is inserted?

Dear All,
Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
Regards,
Ridwan.

Hi,
If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
http://www.quest-pipelines.com/newsletter-v2/smtp.htm
Thanks,
Sharmila

BADI for Vendor Invoice after Posting to send a mail to vendor

Hi,
My requirement Is like this.
I have to send a mail to vendor after the Invoice for vendor is Posted.
For dat I am searching for a badi to implement after the invoice is successfully posted.
Please give some solution about this.
Regards,
Jyoti..

if it is F-43 . check out the following
BAdI Definition      Description
AC_QUANTITY_GET      Transfer of Quantities to Accounting - Customer Exit
BADI_ENJ_ALT_ADR     Go to alternative vendor/customer data
BADI_F040_SCREEN_600 Screen Enhancement on F040 0600 Document Header
BADI_FDCB_SUBBAS01   Screen Enhancement 1 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS02   Screen Enhancement 2 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS03   Screen Enhancement 3 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS04   Screen Enhancement 4 on FDCB Basic Data Screen (010, 510)
BADI_FDCB_SUBBAS05   Screen Enhancement 5 on FDCB Basic Data Screen (010, 510)
BADI_PRKNG_NO_UPDATE BAdI for Deactivating Update of Parked Documents
F050S008             FIDCC1, FIDCC2 Inbound IDoc: Update Comparison Ledger
FBAS_CIN_LTAX1F02    Tax interface
FBAS_CIN_MF05AFA0    EWT - Downpayment Clearing - Tax transfer for CIN
FI_AUTHORITY_ITEM    Extended Authorization Check for Document Display (FB03)
FI_GET_INV_PYMT_AMT BAdI for determining the payment amount for an invoice
FI_HEADER_SUB_1300   Screen Enhancement for Document Header SAPMF05A
FI_PAYREF_BADI_010   BAdI: Payment Reference Number
FI_TRANS_DATE_DERIVE Derive BKPF-WWERT from Other Document Header Data
INVOIC_FI_INBOUND    BADIs for Inbound IDoc INVOIC FI (Vendor Invoice)
RFESR000_BADI_001    BAdI for Own Processing of POR Item
otherwise - find out the package of the program of the transaction.
go to se84 - enhancements- business add ins - definitions - enter package and execute - you will see all the definations.

Error when creating Bid Invitation

Hi all,
I am getting RABAX_STATE error when posting bid invitation shown below
What has happened?
The following error text was processed in the system SRM : An exception that could not be caught occurred.
The error occurred on the application server xxxxxxxx and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: EXECUTE of program CL_ACTION_BID_PUB_OUTPUT_BBP==CP
Form: PROCESS of program CL_ACTION_BASE_BBP============CP
Form: ON_SAVE of program CL_EVENT_HANDLER_BBP==========CP
Form: FIRE_SAVE_EVENT of program CL_EVENTS_BBP=================CP
Form: ACTIONS_ON_SAVE of program SAPLBBP_PD
Form: PROCDOC_SAVE of program SAPLBBP_PD
Function: BBP_PROCDOC_SAVE of program SAPLBBP_PD
Function: BBP_PD_BID_SAVE of program SAPLBBP_PD_BID
Form: DOCUMENT_SAVE of program SAPLBBP_BID_INV
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server xxxxxxx in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server xxxxxxxx. In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 300 -u: STPURCHASER -l: E -s: SRM -i: XXXXXXXX -w: 1 -d: 20070305 -t: 155508 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me now what could be the reson for this.
Regards,
Ravi

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Text in automatic e-mail for vendor when PO creation

Hello experts,
I have customized a message type that sends an email to the vendor when saving a purchase order and it works correctly, but I have some questions about characteristics of this email:
- Is it possible to include a text in the body of the message? I have seen that in "mail title and texts" when output types customizing there is an option for a long text but I do not know how to make this text appear in the email.
- Is it possible to send the email to more that one vendor? If in the vendor master data I include two different email addresses, is it possible to send the email to both of them?
- Is there any way to automatize this message just for one user?
Thanks in advance
Laura

Hi,
In standard not possible to have covering text of a mail which include a text in the body of the e- mail message but only you can send with PO as attachment with subject in as "PO number"
Only possible :you can send PO by e-mail to vendor to single e-mail ID. If you want to send multiple (e-mail) ID, you can go for development with ABAPer with group e-mail concept.
Regards,
Biju K

PO number in title in automatic e-mail for vendor when PO creation

Hello experts,
I have customized a message type that sends an email to the vendor when saving a purchase order and it works correctly, the problem is that in the title of the email I want to put the number of the purchase orde and I do not know how to do it.
I have seen that in the tab page for general data in the customizing of the message type, I can include a program and a form routine, but I do not know how to use them.
Can anybody tell me how I can show this information?
Thanks in advance
Laura

HI,
Goto NACE .
u2022 Select EF and click on OUTPUT TYPES.
u2022 Then select Output Type NEU and click on processing routines .
u2022 In that you have to add a new entry - medium 5 .
u2022 Then you need to assign a program, form routine and form.
u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
u2022 Now the subject will be PO No. 1800004202 for e.g.
u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
u2022 Now while creating a new purchase order , change the medium to External Send .
u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
u2022 Goto tcode ME9F .
u2022 Execute.
Regards,
Pardeep Malik

PO Automtica Sending E-mail to Vendor and sender

When sending purchase order via E-mail to vendor,
SAP only take E-mail adress of vendor.
What can do to send the purchase order to all E-mail adresses defined for a vendor?
I already read OSS note 786847. But I didn`t yet know how to define Z* table. and
where to change program logic to in place of ADRC* table.
thanks
Shi Chun Qing
Edited by: SHI CHUN QING on Jul 2, 2008 10:27 AM

Hi
First you need to Create a New program Copying the Standard Program used for Printing SAPFM06P, make the Changes as per your requiremnt.
If the Vendor has 10 mail addresses , retreive the same from the Address tables & Create a Z table which is a copy of NAST, Table NAST stores the First message, make a copy of that in ZNAST & replicate the same with the Different mai Id's
All the Logic should be included in the Print Program.
Create a Copy of the ME_PRINT_PO & maintain the logic.
Thanks & Regards
Kishore
Edited by: Kishore Kumar Chiluka on Jul 2, 2008 11:11 AM

RFQ send by mail to vendor automatically

I have got the requirement for sending the RFQs to vendors. RFQS
to be sent to vendors with attachment through mails.RFQs needs be
converted to PDF, after converting to PDF it has to be sent to the vendors as an attachment through E-maiil.
So, Can you please tell me the procedure to send RFQS as an attatchment through E-mail.

Hi raguveer,
Hope this link will help you RFQ send by mail through SAP server
Regards,
Pravin

Error when create bid invitation (Tax code CN in procedure TAXD is invalid)

Dear All ,
We have issue in our PDP scenario, when creating a bid invitation from a PR (from R/3), an error occured with message" Tax code CN in procedure TAXD is invalid".
I already raise an oss message and the reply is because the system take different company code that's not active in R/3 system. Its because TAXD procedure is assign to country DE (German) and company 0001 country is "DE".
BE_STGE_LOC 9114
BE_PLANT 7008
BE_BATCH
BE_VAL_TYPE
BE_MOVE_REAS 0000
BE_EXPERYDATE
BE_PUR_GROUP
BE_PUR_ORG
BE_CO_CODE 0001 --> supposed the Correct company code is "8008"
CALL FUNCTION 'FI_COMPANY_CODE_DATA'
EXPORTING
I_BUKRS = BUCHUNGSKREIS
IMPORTING
E_T001 = T001.
We wonder how the system assign company code 0001 with plant 7008, since in R/3 Plant 7008 is assign to company code 8008.
The company code 0001 is not active in our R/3 system.
And also its not happen for all document , so just for several document, and not just in this plant (7008).
The OSS reply also mention that the company chages is because this badi
implementation ZBBP_DOC_CHANGE_BADI with object type 'BUS2121' method 'BBP_SC_CHANGE' 'Method for Changing Shopping Carts'
======================================================
Assign the appropriate company code and modify the ET_ITEM table
ls_item-be_co_code = ls_locmap-company_code.
MODIFY et_item FROM ls_item.
======================================================
But we already use this badi for several years, and we're not sure that this badi id the root cause,and until now there still no solution for this issue.
Please kindly advise.
Regards,
Darwin

Hi SG,
In SPRO > IMG > SRM > SRM Server > Cross Application Basic Settings > Tax Calculation
1.Determine system for tax caluclation : Choose either no tax calculation or Tax calculation occurs in back end.
2. Enter Tax code : Mention Tax indicator as I0 and tax description Zero Tax, Check the No Tax check box and make it default based on your requirement.
Please follow the above steps based on your requirement which will definitely resolve your issue.
This issue comes when the tax calculation happens in the SRM system and the tax code I0 is not defined in tax procedure TAXD.
Hope this makes you more clear. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Multiple Insert in Doc Save Badi when publishing Bid Invitation

Hi to all experts,
Currently i need to track changes in bid invitation. What i did is using doc save badi to get the value (bbp_bd_bid_getdetail) and compare them with the value i save in a cutom table.
Then the problem come in. Even if there is no changes, the badi will still cause an insert into my custom table. I used the debugger to go through the code and it never go to my insert statement.
However once i finishing running the dubugger, my custom table will have a new entry...
Why is this happening? IS it due to the different GUID in the bid invitaion?
Points will be awarded generaously, thanks again for reading.

Hi Disha and Marcin,
Thank you so much for your prompt replies. I have awarded points. We are using SRM 5.5.
Correct me if I am wrong, I have thought of using the doc_change badi but how do I confirm the changes should user cancel the transaction?
Hi Marcin,
I am new to this term LUW, please elaborate more on this.I have checked and confirm no other program or badi called my function modules.
I have suspected that the badi was called n-times and insert a line into my custom tables. I tried using modify in place of insert so that such problem can be avoided but this was not successful with saving longtext.
What I notice is after the system undergo a patch, the doc save badi started to behave in this way?
Please kindly advise, all SAP experts! Thank you!

Send Auto mail to Vendors for Pending Delivery of Purchase orders

Hi Gurus,
I want to send an Auto Mail to my vendors according to their products as a reminder for the delivery of items of Purchase Order .
Please give the configuration changes required for the same
Thanks a lot in Advance
Sam

the message determination has to be customized, and the purchasing value key should have reminder days.
everything else is master data maintenance (material master, info record, message conditions)
http://help.sap.com/saphelp_erp60_sp/helpdata/en/6a/c1041badb111d1b6120000e8a738dc/frameset.htm

Automatic send a mail to vendor

Dear SRM community,

I can not send automatic a mail to the vendor. I use SRM 7.0 andprocess-controlled workflows with automatic approval.
But I can send manuel over my purchase order in the portal to the vendor
Please, can you help me?
Thank advance.

Can't seem to be able to send .mac mail or Maps when on Edge

Has anyone else seen this:
I seem to be able to RECEIVE .mac mail when on Edge, but not sent it (cannot connect to server). Messages head into the outbox, and then get sent once I am back on Wifi.
Maps too does not seem to work on Edge (cannot contact server) ?!
Now, Edge is working for YouTube, Safari etc, so I know the connection is 'up'.
Once I am back on Wifi, messages get send (from the outbox), but is this normal ?
Thanks,
Dan

I'm unsure how normal or abnormal it really is, but I had the same problem yesterday while walking around campus. I was able to receive .Mac mail messages over EDGE but could not send. I tried different areas around the building and even stood still (thinking maybe that was the issue) but everytime the message would get stopped in my Outbox.
I tried it again about 15-minutes later, ironically from the same spot and all my messages went out and recipients confirmed delivery.
Fluke? Hard to say... but it's certainly not a hardware or configurations issue. This morning I sent several more test messages from the same area and all of them went out immediately.

Payment Advice needs to be send as mail to Vendor through SAP.

Hi,
There is a requirement in my businees related to payment advice mail. After running T-Code: F110, spool getting generated with all the payment advice (lets say 20 advice at a time for different vendor). now we want to mail each advice to respective mail through SAP itself. Could you please provide me some idea through which i can achieve this functionality.
Thank you,
Manya.

Please search SDN, you will find all the information already existing on this feature, e.g.:-
[F110 payment advice by e-mail;
Basically BTE event 2040 and 2050 is used for it.
Regards,
Gaurav

Send e-mail to Vendors when Close Bid Invitation

Similar Messages

Maybe you are looking for