Send Results Not Working

Here is my php code:
I am not getting the emails!!
<?php
$subject = 'Results from Contact form';
$emailadd = '[email protected]';
$url = 'http://www.xxxxxxxx.net/thankyou.html';
$req = '1';
$text = "Results from form:\n\n";
$space = ' ';
$line = '
foreach ($_POST as $key => $value)
if ($req == '1')
if ($value == '')
{echo "$key is empty";die;}
$j = strlen($key);
if ($j >= 20)
{echo "Name of form element $key cannot be longer than 20 characters";die;}
$j = 20 - $j;
for ($i = 1; $i <= $j; $i++)
{$space .= ' ';}
$value = str_replace('\n', "$line", $value);
$conc = "{$key}:$space{$value}$line";
$text .= $conc;
$space = ' ';
mail($emailadd, $subject, $text, 'From: '.$emailadd.'');
echo '<META HTTP-EQUIV=Refresh CONTENT="0; URL='.$url.'">';
?>
Here is the page it is going on:
http://www.heapwebdesign.net16.net/contact.html
I have used this code before and it works fine. The only difference is this time I have it in a sliced photoshop image.
ANY ideas???

Test the ability to send an email by using the following simple test script:
<?php
$to = '[email protected]'; // use you own email address here
$subject = 'Test of email function';
$message = 'This is a test of the mail() function on my website.';
$success = mail($to, $subject, $message, 'From: '. $to);
if ($success) {
  echo 'The email was sent';
} else {
  echo 'Mail failed';
?>
Just put that script in a PHP page, upload it to your server, and load it into a browser. If you see that the message was sent, but nothing still arrives, it's likely that the server requires a fifth argument to mail(). This normally consists of '-f' followed by an email address of the same domain as the website.
mail($to, $subject, $message, 'From: '. $to, '[email protected]');

Similar Messages

  • Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

    Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
    After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
    hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
    Any ideas? 

    The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
    And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

  • Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

    Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
    Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
    Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

    Funny how you answer to "troll". (What's your handle on AT&T forums?)
    Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
    I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
    Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
    We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

  • SAP PI FTP sender adapter not working with SAP ECC over Itanium

    Hi,
    We have been running normally SAP PI 7.0 SP14 with no issue for a while.
    We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
    We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
    Does anyone have any idea?
    Thanks a lot for your help
    Diana

    Hi,
    I am using FTP connection and for the receiver it is working fine.
    Thanks
    Diana

  • HTMLDB_MAIL.SEND does not work with 11g

    Hi Guys,
    I have a simple application that uses HTMLDB_MAIL.SEND. I am running APEX 3.0 against an 11g database. When run against a 10g DB all is good. But with 11g I get
    ORA-24247: network access denied by access control list (ACL)
    I looked up the error which recommends altering ACL stuff, which I know nothing about. Is there a simple way to get rid of this error.
    O.

    Hi,
    I have the same problem as you.
    Colud you please explain me how did you resolve it.
    Thanks
    HTMLDB_MAIL.SEND does not work with 11g

  • IMessage send is not working on my ipad2. I can receive only.

    iMessage send is not working on my ipad2. I can receive only.

    make sure you are typing your message in the line BELOW the line with the camera icon, soon as you type in that location the send button will become active.
    Regards, Ct

  • Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

    Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

    Hi Ciaran19,
    Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
    Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
    It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
    Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
    Best,
    Sara

  • Send As not working with cached mode enabled

    Hi
    I am having some issues using Send As. We are running Exchange 2010 Version 14.2 (Build 247.5) and Outlook 2013.
    I have done the following:
    1. created a mailbox user
    2. created a security group and added my own account
    3. added the security group with Send As permission through ADUC on the mailbox user
    4. Waited a day and tried to send as the mailbox user, but it fails
    If I disable cached mode or use OWA it works perfectly. The mailbox is NOT hidden in the address list.
    I have seen this behavior before, but can't remember the "fix"?
    Lasse
    /Lasse

    Hi,
    From your description, the send as permission works well via OWA or Exchange online mode, the send as permission is configured successfully. The issue is related to Outlook side, in your case, I recommend you create a new profile and check the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Powershell Script Send-zip not working when running in cmd

    I found there is powershell send-zip script available in technet.  I tested it and found that it works when the script is running under powershell env, but when it is calling in cmd env, I can see the zip file, but there is nothing in it.  If
    I add the "-noexit" switch it runs normally.  Anyone have ideas what might be happening?
    The orig codes is as following:
    function global:SEND-ZIP ($zipfilename, $filename) { 
    # The $zipHeader variable contains all the data that needs to sit on the top of the 
    # Binary file for a standard .ZIP file
    $zipHeader=[char]80 + [char]75 + [char]5 + [char]6 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0 + [char]0
    # Check to see if the Zip file exists, if not create a blank one
    If ( (TEST-PATH $zipfilename) -eq $FALSE ) { Add-Content $zipfilename -value $zipHeader }
    # Create an instance to Windows Explorer's Shell comObject
    $ExplorerShell=NEW-OBJECT -comobject 'Shell.Application'
    # Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename
    $SendToZip=$ExplorerShell.Namespace($zipfilename.tostring()).CopyHere($filename.ToString())
    SEND-ZIP C:\abc\a.ZIP C:\a\a.bak

    I've had the same problem with similar code found on another web site.
    The reason the zip file ends up being empty is that the temporary $ExplorerShell object you created is deleted when the send-zip function returns,
    and any incomplete copy operation that may still be ongoing at that time is aborted. (The copy operation is asynchronous, and continues after the CopyHere() function returns.)
    To work around this, you need to add a delay loop before you return, waiting for the copied object to appear in the zip.
    (Note that adding a fixed delay, like I've seen on other web sites, does not work: Small files appear almost immediately, whereas large file or worse still large subdirectory trees can take a long time to appear.)
    Try changing the end of your routine to something like...
    # Create an instance to Windows Explorer's Shell comObject 
    $ExplorerShell=NEW-OBJECT -comobject 'Shell.Application' 
    # Open the zip file object
    $zipFile = $ExplorerShell.Namespace($zipfilename.tostring())
    # Count how many objects were in the zip file initially
    $count = $zipFile.Items().Count
    # Send whatever file / Folder is specified in $filename to the Zipped folder $zipfilename 
    $SendToZip=$zipFile.CopyHere($filename.ToString())
    # Wait until the file / folder appears in the zip file
    $count += 1 # We expect one more object to be there eventually
    while ($zipFile.Items().Count -lt $count) {
        Write-Debug "$filename not in the zip file yet. Sleeping 100ms"
        Start-Sleep -milliseconds 100
    # Return deletes the $zipFile object, and aborts incomplete copy operations.

  • IProcurement - new VO for search results not working properly?

    Greetings
    There is a requirement for the project I´m working, where the search results on iProcurement must be filtered depending on some profiles setted for the user.
    So, basically the search shouldn´t look into ICX_CAT_ITEM_PRICES, but on a custom view that works on that table, but filtering results.
    Unfortunately, that´s not working. I extended the VO (which seems to be SearchResultsVO and ItemDetailParametersVO), so the queries are now pointing to the view. But once the search is performed, the results are not filtered. It´s the very same results as before.
    Am I doing something wrong? There is some cache that works even after the Apache server is restarted? Please I could really use some help on the subject! Thanks!
    Best Regards,
    Thiago

    Thiago,
    Why don't you use a local Jdev setup for substitution process so that testing and debugging is easier.
    Follow these steps for testing locally:
    1. Add your VO to AM.
    2. After extending VO, do the following,
    Right-click on your project in the Navigator pane, and select Edit Business Components Project (or right-click on the project's .jpx and select Edit <project>).
    a. Select the Substitutions section.
    b. From the Available list, select the base object that you want to replace and press ok.
    3. Normally, the BC4J runtime does not read a project's .jpx file. To override this default behavior in JDeveloper so you substitutions can be used, you must do the following to ensure that the classpath contains the .jpx file.
    a. Right-click on your project and select Project Settings.
    b. Then in Configurations | Development | Runner, add -Djbo.project=Name to the Java Options. Note that the Name value is the .jpx file name without the .jpx extension (for example, ExtendLabSolutions). Be sure to include a space between any existing options and the new option.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • JMS-send operation not working in a SessionBean [OC4J10.1.3.1.0-standalone]

    Salut,
    i am envisaged with a nasty problem calling a message-send operation from
    a method (transaction-type="required") inside a session bean (transaction-type="container").
    This problem occured in OC4J 10.1.3.1 and may fail also in 10.1.3.0. The same
    code run under OC4J 10.1.2.x without any problems.
    The adressed JMS type is a OEMS JMS and fails to work regardless if the JMS ressource
    is using a file-persistence or is running in-memory. Anyway the factory is a
    jms/XAQueueConnectionFactory, so the created queue must support XA transactions.
    Another test with an advanced-queue JMS provider succeeded.
    As a consequence of this, i believe that the OEMS provider shall cause the problem.
    The original code is quite unspectaculary:
    * The non-surprising thing is, that the QueueConnectionFactory
    * is a XAQueueConnectionFactory.
    QueueConnectionFactory qcf = (QueueConnectionFactory) (jndiContext.lookup(MY_QFAC));
    Queue q = (Queue) (new InitialContext().lookup(MY_QUE));
    c = qcf.createQueueConnection() ;
    QueueSession s = c.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
    [... create a message ]
    QueueSender qs = s.createSender(q)
    qs.send(m);
    qs.close()
    s.close();
    c.close()
    The funny thing is, that the queue-session behaves as it is working outside
    of a transaction context. Inside the JMX-Console you will notice the
    arrival of a message and ... a cancellation of it. This would not surprise
    me, if this code sequence would have been called outside of
    a Session bean, cause the absence of a queue-session.commit does not
    fix the send message in the jms ressource.
    As a matter of fact the code is executed inside a Session bean and
    the connection.createQueueSession will notice this and forget both
    given parameters, and let the covering transaction take over of the
    JMS ressource. But this does not happen (completly).
    The acknowledge-mode has been modified (SESSION_TRANSACTED)
    but the code still does not work!
    After i recognized that the enlist-ment did not work, i
    decided to enfore the use of XA transaction by using the
    XA classes and methods of JMS.
    I startet to cast the jndi-references and:
    XAQueueConnectionFactory qcf = (XAQueueConnectionFactory) (jndiContext.lookup(MY_QFAC));
    Queue q = (Queue) (new InitialContext().lookup(MY_QUE));
    XAQueueConnection c = qcf.createXAQueueConnection() ;
    XAQueueSession s = c.createXAQueueSession();
    [... create a message ]
    QueueSender qs = s.createSender(q)
    qs.send(m);
    qs.close()
    s.close();
    c.close()
    The funny thing is ... the code worked without any problem until
    the send operation, where i received an JMSException, containing
    the text:
    Oc4jJMS.Session.hpcl057.4e9c06e4:1112674930d:-7fff.41,true,SESSION_TRANSACTED]: An attempt was made to perform work in a XA-backed session without being enlisted. Either the session must be enlisted (using the JMS Connector or JMS Adapter) to participate in the global transaction, or a non-XA connection and a non-XA session should be used to not participate in the global transaction.
    How bizarre, i thought the enlistment has been taken place by invoking
    the c.createXAQueueSession or c.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
    How bizarre how bizarre
    any clues ????

    OC4J JMS was changed to not auto-enlist in XA transactions.
    In releases prior to 10.1.3 XA usage was not actually supported. (It did not meet all of the XA requirements when used with OC4J.)
    Auto-enlisting by the JMS provider was also a spec violation, which was causing trouble for people who needed to do out-of-transaction work and had no way to do it.
    In 10.1.3 XA usage is fully supported, but only when you use the JMS Connector. You can find the JMS Connector ("Oracle's Generic JMS Resource Adapter") demos here:
    http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/index.html#JMS
    The JMS Connector is documented in the OC4J Services Guide, OEMS/JMS chapter.
    -Jeff

  • "Send" button not working in Mail

    Picked up Leopard on an iMac two days ago. Some of the time when I compose a new email, Mail works fine--I click "send" once I'm through typing and out it goes.
    Other times--like this morning--I try to send an email and the "send" button is transparent and does not click. This is not a server issue. I tried adding the recipients to my address book in case there was some weird thing where that had to be done first. But to no avail--the "send" button won't click, nor will the "send" command within the toolbar or drop-down menus--and so I have no clue how I'm supposed to send this email if the button to do it is not working. Help!

    Unfortunately, the SMTP and outgoing mail settings aren't the issue. The issue is that the "send" button is visible but un-clickable. I tested sending mail from all of my accounts and it works just fine--sometimes. Other times, I try to reply to an email or send out a new one and the "send" button does not allow me to send anything at all.

  • Subtraction of two key figures normalized to result not working as expected

    Hello SAP Community!
    I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
    In order to explain the problem I am facing please analyze below text:
    1) Let's assume I have below data:
    LOAD MONTH  PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
    200805         PLANT-A  MAT-1            200805         510,235.00
    200805         PLANT-B  MAT-1           200805          74,240.00
    200805         PLANT-A  MAT-1           200806         438,721.00
    200805         PLANT-B  MAT-1           200806          74,240.00
    200805         PLANT-A  MAT-1           200807         356,981.00
    200805         PLANT-B  MAT-1           200807          74,240.00
    200806         PLANT-A  MAT-1           200805               0.00
    200806         PLANT-B  MAT-1           200805               0.00
    200806         PLANT-A  MAT-1           200806         510,235.00
    200806         PLANT-B  MAT-1           200806          74,240.00
    200806         PLANT-A  MAT-1           200807         438,721.00
    200806         PLANT-B  MAT-1           200807          74,240.00
    2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Comparison Units (June 2008) 510,235.00  438,721.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Comparison Units (June 2008)  74,240.00   74,240.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
    we normalize forecats to results an we get the below report:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
    units, for both number of units and %. The report now look as below:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  1.77%       2.74%
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %  -1.77%      -2.74%
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    5) PROBLEM:
    In my report, the "Delta base vs. comp. units %" is not working as expected and
    calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
    So my report looks as follows:
    Material  Plant                                 2008/06     2008/07
    ===================================================================
    MAT1      PLANT-A  
                       Base Units (May 2008)        438,721.00  356,981.00
                       Base Units % (May 2008)      85.527%     85.527%
                       Comparison Units (June 2008) 510,235.00  438,721.00
                       Comparison Units %(Jun 2008) 87.298%     82.784%
                       Delta base vs. comp. units %  71,514.00  81,740.00 <<<WRONG!!
                       Delta base vs. comp. units    71,514.00  81,740.00
              PLANT-B  
                       Base Units (May 2008)         74,240.00   74,240.00
                       Base Units % (May 2008)       14.473%     15.702%
                       Comparison Units (June 2008)  74,240.00   74,240.00
                       Comparison Units %(Jun 2008)  12.702%     17.216%
                       Delta base vs. comp. units %       0.00        0.00
                       Delta base vs. comp. units         0.00        0.00
              TOTALS   Base Units                   512,961.00  431,221.00
                       Comparison Units             584,475.00  512,961.00
    The formulas are:
    a) Delta base vs. comp. units %
      Delta base vs. comp. units % = Comparison Units % - Base Units %
    b) Delta base vs. comp. units
      Delta base vs. comp. units = Comparison Units - Base Units
    The KFs
    - Comparison Units %
    - Base Units %
    Are RESTRICTED key figures (restricted to Base and comparison month variables) which
    are setup as:
    1) Calculate Result As:  Summation of Rounded Values
    2) Calculate Single Value as: Normalization of result
    3) Calculate Along the Rows
    The KFs
    - Delta base vs. comp. units %
    - Delta base vs. comp. units
    are FORMULAS setup to:
    1) Calculate Result As:  Nothing defined
    2) Calculate Single Value as: Nothing defined
    3) Calculate Along the Rows: user default direction (grayed out)
    Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
    Any help is highly appreciated.
    Thank you.
    Mario

    Hi,
    The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
    I hope this will solve your issue.
    Regards,
    S P.

  • Send button not working on sms after upgrade

    My send is no longer working on sms after i upgraded. I have done factory setting and still not working . Any ideas of anything else i can try ? frustrated

    I have same problem. Can open message. As if keyboard is frozen.
    Unable to type then send. Also, tried shutting off preview.

  • Send button not working on Droid

    I have a customer trying to sign a document using a Droid. They can fill in the signature but the Send button is not working.

    Hi,
    Please can you contact support , https://echosign.zendesk.com/hc/requests, and provide them with as much detail on the issue as possible including any screenshots. They can then investigate this for you.
    Thanks,
    Jat

Maybe you are looking for