IMessage send is not working on my ipad2. I can receive only.

iMessage send is not working on my ipad2. I can receive only.

make sure you are typing your message in the line BELOW the line with the camera icon, soon as you type in that location the send button will become active.
Regards, Ct

Similar Messages

  • HT4059 ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

    ibook app is not working in my ipad2, i can see stored books but unable to open them. this happened since i hv updated to ios6. ipad wasnt jailbreak. kindly assist me

    Having the same issue, can someone please enlighten us?

  • IMessage send does not work

    Hi,
    a week ago i updated from iPhone 3GS to 5. Everything is working fine. The iPhone was build up from an icloud iOS 6.0.1 backup. But i have trouble with iMessage.
    I configured iMessage to receive/send messages to my phone number.
    Receiving imessages is working so far.
    Sending messages does not work at all. Only if i had a former communication with the receiver, imessage will detect it and send an imessage. if i start the communication, it does not work.
    During the update process i did not change my telephone number. I only get a new Nano-Sim-card. I tried everything including a fresh reinstall of iOS, re-activation of imessage and so on.
    My iPhone 3GS is still available in my registered products. It was also configured with same telephone number under my AppleID. But the SIM-card is deactivated and iPhone is shutdown and resetted after updating to iPhone 5.
    Do you have any suggestions?

    See:
    iOS: Troubleshooting FaceTime
    Are the registered with Messages? You can only Message among iPods, iPhone and iPzads with the messages app.

  • TS2755 iMessage SEND button not working

    I can receive messages in iMessage but cannot send. Any suggestions?

    Thanks.
    Researched a lot of others , but your was the one that worked.
    Appreciate your sharing this great solution/ tip

  • Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

    Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
    After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
    hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
    Any ideas? 

    The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
    And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

  • Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

    Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
    Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
    Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

    Funny how you answer to "troll". (What's your handle on AT&T forums?)
    Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
    I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
    Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
    We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

  • SAP PI FTP sender adapter not working with SAP ECC over Itanium

    Hi,
    We have been running normally SAP PI 7.0 SP14 with no issue for a while.
    We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
    We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
    Does anyone have any idea?
    Thanks a lot for your help
    Diana

    Hi,
    I am using FTP connection and for the receiver it is working fine.
    Thanks
    Diana

  • The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it.  What else is there to do?

    The wireless keyboard is not working with my iPad2.  I turned on bluetooth and paired the device.  What other hidden step is there to do?

    Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off.  Later, when I tried the keyboard again, it worked.  I guess the bluetooth process takes longer than expected.  So thank you for taking the time to help a technically impaired person!!

  • IMessage and FaceTime not working on Mac Pro and message stating to contact Support came on

    iMessage and FaceTime not working on Mac Pro and a message stating to contact Support came on with a verification code.  It was working on 8/29 but stopped on 8/30.  When I called support to even speak with anyone they wanted $19.  I don't want to pay $19 for an Apple problem.  I cleared my key chain, also reset my apple ID password but still not working.  Works fine on my iPhone.

    There is no official public documentation of that error message as far as I know, but according to reports, it can mean (at least sometimes) that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a free service.
    Otherwise, do what the error message tells you to do. According to reports, you won't be charged for the call if you select "Apple ID" as the product you need support for, and cite the customer code in the alert as the "validation code" to the support representative.

  • HTMLDB_MAIL.SEND does not work with 11g

    Hi Guys,
    I have a simple application that uses HTMLDB_MAIL.SEND. I am running APEX 3.0 against an 11g database. When run against a 10g DB all is good. But with 11g I get
    ORA-24247: network access denied by access control list (ACL)
    I looked up the error which recommends altering ACL stuff, which I know nothing about. Is there a simple way to get rid of this error.
    O.

    Hi,
    I have the same problem as you.
    Colud you please explain me how did you resolve it.
    Thanks
    HTMLDB_MAIL.SEND does not work with 11g

  • Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

    Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

    Hi Ciaran19,
    Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
    Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
    It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
    Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
    Best,
    Sara

  • This link is not working. Please if you can access this l...

    this link is not working. Please if you can access this link send me the text from it (as an attachement by email)

    Is the SQL being passed to Access valid for Access:
    SELECT Orders.*, Tickets_detail.OrderID2 AS T2, Tickets_detail.Price, Tickets_detail.ticketname FROM Orders JOIN Tickets_detail ON Orders.OrderID = Tickets_detail.OrderID2 WHERE EventID =24 AND AuthNetCode =1 AND OrderType IS NULL ORDER BY orderID2 DESC
    (that's from your error msg)
    Can you run that on Access?
    I suspect the JOIN syntax might be different.
    Any reason why you're running SQL Server on live, and Access on dev? You're making a bit of a rod for yourself there.
    Adam

  • I am tring to start work I masseg and facetime on my I pod touch  4g on IOS 6 but not work with my apple ID can you help my

    I am tring to start work I masseg and facetime on my I pod touch  4g on IOS 6 but not work with my apple ID can you help my

    Maybe here. You are not really provided much information like what happens when you try.
    iMessage won't work after iOS 6 upgrade: Apple Support Communities

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

    If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem.  I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Maybe you are looking for

  • Open Directory: user authentication and logining takes a lot of time

    We have Mac OS X Server Snow Leopard 10.6.8 with OpenDirectory and some iMacs with Mac OS X Snow Leopard 10.6.8. After adding Network Account Server in iMacs (System Preferences->Accounts->Login Options->Network Account Server Edit) OD works normally

  • Spontaneous Mouse Click

    My T520 will have the cursor left click approximately every 5 seconds.  This occurs inconsistently, and it is hard to tell whether there is a problem with the mouse driver or the physical click sensors on the keyboard.

  • BIP Scheduler Configutartion

    Hi all, When i check scheduler configuration in BIP i am getting an error like could not establish connection . In scheduler diagnostics status Database Connection failed: weblogic.jdbc.extensions.PoolDisabledSQLException: weblogic.common.resourcepoo

  • Why is DPM 2012 R2 splitting this Co-located Protection Group Set across three different tapes?

    I have 10 protection groups that ran Saturday night.  I have put information about them in the following table: I extracted the data in the table using Get-DPMProtectionGroup CmdLet and the job information from the Monitoring page of the DPM admin co

  • How Respond() function knows what NID to use

    Hi, I need to respond a notification from my application, I read a lot of message about it, but I can't see how to get the notification ID (NID) to call respond() function, I saw the following example about it: CREATE OR REPLACE PROCEDURE "RESPOND" (