Sender File adapter_MessageTransformBean_File not picked up

Hello SDN,
               While simulating a jms testing scenario i am using a file adapter with MeassageTransformBean but my issue is that the file is not getting picked up from AL11.
Here is my settings:-
Number    Module Name                                       Module Type     Key
1             AF_Modules/MessagesTransformBean         L                Plain2xml
2             CallSapAdapter                                           L                   0
Module Configuration:-
MessageBody.fieldFixedLenghts               1,1,.......
MessageBody.fieldNames                         AA,BB,CCC,....
MessageHeader.fieldFixedLengths             9,2,2,8,8,7
MessageHeader.fieldNames                       DD,EE,GG,HH....
keyFieldName                                           XXXXX
recordsetStructure                                     MessageHeader,1,MessageBody,*
can anyone suggest why my file is not getting picked from AL11 ?
Regards,
Anirban.

Hello Stefan/Aaron,
The file is read and i can see in cc monitor now.
But i get the error that :-
Transform: failed to configure the transformation object com.sap.aii.messaging.adapter.Conversion; com.sap.aii.messaging.adapter.trans.TransformException: Error initializing conversion routine: conversionType not set
But in my module configuration i have given them as
xml.conversionType SimplePlain2XML
Any ideas on it please.
Regards,
Anirban.

Similar Messages

Sender File Adapter Not Picking Any File

Dear Expert,
I am newbie in PI. Just tried to create File Content Conversion Scenario. Details as follow :
1. Source Directory ..\file\log\test_q.txt
2. Target Directory ..\file\log\xml\test_q.xml
Transport Protocol : NFS
Message Protocol : File Content Conversion
Adapter Engine : Integration Engine
I have completed all the design and configuration in IR and ID. However, when I produce the log file in the directory, nothing happen.
Hacing checked in the RWB as well, I could not find any clue. simply nothing happen.
Would you please advise me on how to trigger the interface? As per my understanding, sender file adapter will be activated directly once the file is created.
Thank you very much in advance.
Best Regards,
Y

Hi Yonisiwa,
Things you should check here are:
1) If the sender file adapter is active or not.
2) If the source directory is correctly spelt or not. (Check if you are using the correct slash \ or /)
3) The file name/mask is correct or not.
4) The polling interval is too long.
Alternatively, you can check the message monitoring in RWB at the adapter level and go into the audit log if the message.
There you can see the reason for the file not being picked up.
Also check the Communication Channel status in the Component Monitoring link in RWB.
Regards,
Ravi Kanth Talagana

Sender File Adapter not picking up the file

Hello Experts,
I have configured a sender file (FTP) adapter. All the configurations are right. The name of the file is given exactly as it is. The processing mode is Delete.
The scenario was running fine till today. I only made changes to the path from which it has to pick the file. I have checked the path numerously and it is correct.
But the file is not being picked up.
Monitoring the communication channel shows no errors. It has the green indicator. No idea what is happening.
Please Help,
Regards,
Merrilly

Hi
try to make some changes anf then again save and cativte the adapter. may be the adapter is not being activated.
also check whether the cache is refreshed or not.
or u can also check in the communication channel monitoring the channel is start or stop. if stop then start the channel and then try again.
if u still face the problem please reply me back.
Thanks
Rinku

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

Text File is not picking with data

Hi Experts,
I am doing file to file scenario without IR as file will be generated by the ECC system and places in SAP FTP App Server.
My job is to pick up the file and send it to the Third Party Application Server.
But when i am picking up the Text file the data in the file is converting into special characters like below format.
ÅÁÄÅÙ@ððððððâÖÕÄÅçöôðð@@@@@@òððùð÷ñ÷ðñ%@@@@@@@@@@@@@@òððùð÷ñ÷%ÄÅãÁÉÓ@ðððð
I have tested with other Application server with same file its working fine, but when i send the file from SAP FTP Appl server the data is converting in the above format.
Right now when i open file zilla it is opening with 3 FTP Appl Server in that suppose lets say the FTP are APP1, APP2, APP3.
1.When i send the file from APP1 through Transport Protocol NFS System the file is picking up and placing successfully in the Third Party APP3 App Server fiolder but the data in the file is converting into special charaters.
2.when i send the same file from APP2 through Transport Protocal FTP the file is picking up and placing successfully in the third party APP3 App server and here the same data is coming in the text file, there is no data conversion.
I am not getting here, when i send the file from APP1 the data is converting but when i send the same file from APP2 App srever the data is posting correctly.
And also i can give you one more info.. if i try with puting the Transport Protocal as FTP in APP1 then i am getting error in sender comm channel as 'log on attempt by User JOHN rejected' : contact your FTP server vendor.
But i think for sending the file from SAP Appl Server we can use TP as NFS rather than FTP.
And also i can give one more info: The Version is the ECC system is using the 4.6c for which there is no compatability for unicodes.
Can anyone please advise what would be the wrong.
Appreciate your inputs
Thanks,
Bhaskar

Hi,
Reason because file is not picked up.
>'log on attempt by User JOHN rejected' : contact your FTP server vendor.
clearly user/password for this FTP server or system is not correct. Get correct userid/password for your Application server where you are trying to poll.
>The Version is the ECC system is using the 4.6c for which there is no compatability for unicodes
File transfer is nothing to unicode here.
Regards,
Gourav

File Adapetr: File is not picking from File directory

Hello,
Issue: we are facing issue with file sender adapter like file is not picking from source file directory.
Scenario: FTP1>PI>FTP2
1. SAP PI sender communication channel will pick the file from FTP1 and process to PI file server (NFS)
2. from PI file server (NFS), file will process again to FTP2
So while picking the file, it shows following error:
Could not process due to error: java.lang.IllegalStateException: Error during RETR epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 451 Transfer aborted. Broken pipe
Conversion of file content to XML failed at position 0: sun.io.MalformedInputException
Processing started
this issue occur after we migrate the PI server from hpunix to aixunix.
Best Regards,SARAN

Hi,
check the FCC parameters, fieldfixedlength option would be used when the exact length of field is constant in the Sender, In the FCC the fieldfixedlength parameter carries the length of the each.
Check out Michal's blog on content conversion for all your doubts :The specified item was not found.
Kindly check the below links for further assistance.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
regards,
ganesh.

File Adapter not picking the file

Hi Experts,
I am trying to create a Legacy-XI-R/3 scenario. I am using a file adapter as the sender communication channel and a ABAP proxy at the receiver end. I have given the path of my input file in the legacy system, but the file is not picked up by the adapter. Can any one tell me where I might have gone wrong?

Hi,
Just want to add one more suggestion.
Check the Host name, where the File is kept and try to use the directory path as
<HostName>\<DirName>.
Hope this help.
Aj.

File is not picked up through NFS.

hi guruz ,
iam doing a simple file to file scenerio .
sender file (.txt file tab delimeted) NFS file adapter.
reciver file (.txt file tab delimeted) NFS file adapter.
i putted the file in xi server c:\sender\file.txt.
and for reciever i made c:\reciver.
but the file is not picked up .
i checked in (RWB).mssges showing sucess ,but no mssg id.
pls guide me .
warm regards

Hi Pawan,
As you are using Transport protocol as File System(NFS) in the comm channel you need to upload your local file in the XI server, just execute SE37 in your XI server then put the module name : ARCHIVFILE_CLIENT_TO_SERVER and execute it. there you give your local file path\name and the target server path(e.g /usr,/tmp etc.)
after successfully executing you can see the uploaded file by going to AL11 transaction.
in the sender comm channel give the server path where you uploaded the file as the source directory. activate.
now start your sender comm channel in RWB.
--Sankar Choudhury

JMS sender adapter is not picking up message from MQ

Hi Experts,
I have configured the JMS sender adapter for getting message from Websphere MQ. In RWB the adapter and the communicaiton channel all looking good. The trace file tells me the connection to the queue has been established.
But the problem is this JMS sender adapter is not picking up message from the Queue defined on the MQ site.
Any Idea what could be wrong?
Thanks!
Jason
Jason

Hi,
1) Can you activate the JMS adapter again ( edit save and activate it )
2) Check whether the right Queue is addressed.
Regards
Agasthuri Doss

Files were not picked by channel

Hi experts,
Some files are not picked by communication channel , generally restarting the channel in channel monitoring is also not use full in this case.
Communication channel is stating as green color and in adapter setting archive path also correct , file name also matched with coming files from sender system..but files are not processed by channel and file adapter.
we requested basis people to restart the services....
why it happens some time....like this way..any specific reason behind this types errors..
can some one proved description about this .

Hi,
    1. Did you try stopping and starting the communication channel from runtime workbench--> adapter monitoring --> communication     cahnnel monitoring for your sender communication channel.
Also you can give a try by inactivating and activating the file sender communication channel in ID.
    2. The File Service alone can be restarted from Visual Admin or Netweaver Administrator. It could be done in seconds.
            to start and stop the service in visual administration. Login into visual administrator --> system id --> services --> SAP XI Adapter File --> right click on it and you have stop and start options. Stop it from there and restart it.
        PI 7.1 AF Messaging System successful asynchronous message audit log persistence
     3.your communication channel might be locked and which needs to be unlocked. thatu2019s why it is showing polling but not actually picking any file..
in your case also it might be the same case try to check that there is no communication channel locked. you may need to contact basis or PI administrator..
if any lock .. remove the lock then stop and start your communication channel and it should work properly.
regards,
ganesh.

File is not picking from the source location.

Hi all,
File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
Thanks to all.
Korean

Hi Majin,
Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
Thanks,
Ranjeeth.

File is not picking in delete mode.

Hi All,
I have created a file to BAPI scenario using content conversion parameters .
my file is getting picked and successfull when i give processing mode to test and archive.
It is failing if i give the processing mode to delete.
Can you please suggest.
Thanks in advance,
Radhika.

Hi Radhika,
Please check the same Thread replies in the Morning which is raised By U
File is not picking in delete mode.
Regards
Seshagiri

Sender File Adapter - Not Running

Hi,
I have developed a very simple scenario which uses the File adapter within the sender communication channel. I have done this sort of thing before and it always worked as expected. All that should happen is the file is picked up via FTP and turned to XML using Content Conversion. Easy stuff.
However, the adapter never appears to run. If an FTP adapter finds a file then you will see an entry in SXI_MONI. If an FTP adapter doesn't find a file then you see nothing. At the moment I am seeing nothing. However, I should be seeing something because all of my Connection/Access parameters are correct. There is a file there but it's not picking it up.
The question I have is this. Is there somewhere in SAP that I can see the adapter attempting to run. As the adapter polls every 60 seconds to see if a file is in place then surely this poll is logged somewhere in SAP. I would like to find out if the adapter simply isn't running at all or it is and is having issues. Only way to do this is to find a log/screen in SAP which details the adapter polling the sending server. Is this possible ?
Cheers,
PaulC.
Edited by: paul clements on Jun 9, 2011 12:58 PM

● You have started the Runtime Workbench, are in component monitoring, and have selected an Adapter Engine as your component.
● On the Status tab page, you have chosen Communication Channel Monitoring to call the communication channel monitor.
Regards
Pothana

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

Sender File adapter_MessageTransformBean_File not picked up

Similar Messages

Maybe you are looking for