Sender JDBC Error
Hi,
i am using XI7.0, Sender JDBC error is below;
when i test to connect to Oracle DB in using JAVA Code with ojdbc14.jar which was deployed into XI J2EE, i have no problem with insert update delete in using same code which was used in JDBC adapter in Configuration Time.
but JDBC Adapter on XI(JDBC2JDBC) is not running as well.
please look at the following and please guide.
JDBC Driver : oracle.jdbc.driver.OracleDriver
connection : jdbc:oracle:thin:@60.7.111.211:1577:AACC
S_SSS_MMM_JDBC_MDMALL001CU Sender Adapter v1402 for Party '', Service 'SSS_BS01_TESTBS01_D':
Configured at 12:29:23 2006-07-10
Last message processing started 12:29:55 2006-07-10
Error: Sending message '4299fec0-0fb4-11db-c508-000d604dde82' - failed with unexpected exception - proceed anyway: java.lang.ClassCastException: $Proxy222
last retry interval started 12:29:55 2006-07-10
length 10,000 secs
does anyone know how to fix it?
thanks
venjamin
Hi Venjamin,
Just try the follwing,
1. The Select Query in your Sender JDBC adapter. Try executing the same query on your DB client and check if it works fine and the data returned by it is of valid format?
2. Is any of the datatype being returned a CLOB or BLOB?
Regards,
Bhavesh
Similar Messages
-
Error while executing the stored procedure through sender JDBC adapter
Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Rameshhi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh -
I have a select query as
SELECT * FROM ULIDTA2.F5631505 where QSINTF ='Y'
update query is
Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'
i get the following error in my Adapater .
Sender Adapter v2108 for Party '', Service 'BS_Database_to_RFC_BPM':
Configured at 2006-03-10 12:31:18 GMT+08:00
History:
- 2006-03-10 12:33:06 GMT+08:00: Retry interval started. Length: 60.000 s
- 2006-03-10 12:33:05 GMT+08:00: Error: SQLException during update 'Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'': SQLException: [SQL7008] F5631505 in ULIDTA2 not valid for operation.
- 2006-03-10 12:33:00 GMT+08:00: Processing started
- 2006-03-10 12:32:05 GMT+08:00: Error: SQLException during update 'Update ULIDTA2.F5631505 set QSINTF='Y' where QSINTF ='N'': SQLException: [SQL7008] F5631505 in ULIDTA2 not valid for operation.
- 2006-03-10 12:32:00 GMT+08:00: Processing startedHi Amit,
A JDBC sender adapter has 2 essential fields,
1. SQL Statement
2. Update Statement
Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
But, if you want to insert/update your Database, then you can go for a JDBC receiver adapter.
Multiple insertions are possible for a JDBC receiver, but multiple Selection queries (different select queries) are not possible for a single JDBC sender adapter.
Just check these links to understand how JDBC adapters work,
If you wanna do update/insert you will have to follow the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm">Document Formats for the Receiver JDBC Adapter</a>
For Configuring the Receiver JDBC Adapter refer:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter</a>
For Configuring the Sender JDBC Adapter refer:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
Regards,
Abhy -
Error in calling stored procedure in sender JDBC adapter
Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan -
Error in Sender JDBC communication channel
Dear All,
We have an interface in which we are fetching data from SQL database through sender JDBC communication channel.
Last week SQL server was upgraded from 2000 to 2008 and the communication channel has stopped working and is giving the following error:
Database-level error reported by JDBC driver while executing statement 'SELECT * FROM mstemp_tbl WHERE Active='0''. The JDBC driver returned the following error message: 'java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 1 (""): Data type 0x38 is unknown.'. For details, contact your database server vendor.
Please let me know if any JDBC drivers are to be installed for SQL 2008 or how can we resolve this.
Thanks,
NJHi,
You may need to update your JDBC driver to 1.2 or 2.0. Kindly see supportability matrix on this link (question #2):
http://msdn.microsoft.com/en-us/sqlserver/cc325721
Regards,
Jenny -
Error in communication channel sender JDBC AS400
The communication channel worked ok, but suddenly they began to give the following error:
Error during database connection to the database URL 'jdbc:as400://10.1.0.254/afildat' using the JDBC driver 'com.ibm.as400.access.AS400JDBCDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:as400://10.1.0.254/afildat': java.awt.HeadlessException.
The driver was installed again, but error persist.
ThanskHi,
This issue is due the Sender JDBC Server got restarted or down, check the server connectivity.
If you found still the issue then Stop & Start the communication channgel once, surely your issue will be resolved immediately.
Regards
Venkat -
Error in XI Sender JDBC adapter for AS/400 DB2
We are trying to connect to AS/400 DB2 from XI's Sender JDBC Adapter. we got the driver from DataDirect (connectjdbc.jar) and configured it within XI .The configuration according to the manual for this jar file is
// Register the driver with the driver manager
Class.forName("com.ddtek.jdbc.db2.DB2Driver");
// Establish the Connection
String url = "jdbc:datadirect:db2://corpserver1:50000;LocationName=ACCTNG";
Connection con = DriverManager.getConnection(url, "test04", "test04");
In XI we configured this as:
Driver = com.ddtek.jdbc.db2.DB2Driver
Connection = jdbc:datadirect:db2://servername;LocationName=NBHAGWAT
and specified the user id and password
<b>Note</b>: The Port Number is optional
When this was done in XI, we got the below error in the Adapter Monitoring:
Sender Adapter v2108 for Party '', Service 'JDBCtoFile':
Configured at 2006-12-19 15:45:31 MST
History:
- 2006-12-19 15:45:31 MST: Retry interval started. Length: 10.000 s
- 2006-12-19 15:45:31 MST: Error: Accessing database connection 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT': SAPClassNotFoundException: com.ddtek.jdbc.db2.DB2Driver
- 2006-12-19 15:45:31 MST: Processing started
Is this because there is something wrong because the way the connection string is specified.
Anybody who has configured XI Sender JDBC adapter for AS/400 DB2, please send us some information on this.
Thank you,
Regards,
Balaji> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a> -
Hi all,
We are having an extrange problem. We are trying to read some info from an oracle Database, but we have always this error :
Error: SQLException during query 'SELECT * FROM XX': java.sql.SQLException: ORA-00942: table or view does not exist: SQLException: ORA-00942: table or view does not exist
And WE have checked it, and the table is there. To understand what is happening we try with another table and it works, we have compare both an has the same features.
Any Ideas?Hi,
This is the format in which your Data polled from the DB wiill be created,
<i><resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2>column-value</ column-name2>
<column-name3>column-value</ column-name3>
</row>
</resultset></i>
Resultset is to be replaced by your DT / Message Type name.
In the Sender JDBC adapter, give the Document Name as the Message Type name and the Document Namespace as the Namespace of your Message Type.
Is this how you have created the source structure?
Regards
Bhavesh -
Error at sender JDBC communication channel
Dear All,
While executing JDBC(MS-Access)-PI-RFC interface, we are getting error in sender JDBC communication channel. The error is as following:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=
sappidev\Datatran\Database.mdb' using the JDBC driver 'jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Can not establish connection:: SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'.
I have checked various posts on forums and as per those no drivers installation is required to access MS-Access database and I am not able to find any post which could solve my problem.
Kindly guide me on what might be the problem and how this can be resolved.
Regards,
NJHi Nishu,
That error ALWAYS means your DSN name is incorrect or can't be accessed for some reason (permission). The ODBC part says that the bridge is working.
But that DSN is 100% wrong or cannot be seen by the user account that the server is running as. Make sure you have a system DSN and not a user one.
You can refer these....
http://bytes.com/topic/java/answers/625400-java-sql-sqlexception-microsoft-odbc-driver-manager-data-source-name-not-found
http://www.daniweb.com/forums/thread13092.html#
Hope this will help you....
Regds,
Pinangshuk. -
Can some one help me with the following error please?
I just want to read store column from Oracle database table SA_BO_SALES_TEST and create a Flat File. I have JDBC-XI-FILE scenario. I use the same Data Type for Sender(JDBC) and receiver(FILE) Message Type.
the data type is
DT_STSSales_SA_BO_SALES
resultset
row
STORE
The message type is
MT_STSSales_SA_BO_SALES
resultset
row
STORE
The message mapping is between the same message type(MT_STSSales_SA_BO_SALES) for source interface and destination interface.
The sender JDBC Adapter has
Query SQL Statement -
SELECT STORE FROM SA_BO_SALES_TEST WHERE PROCESS_DATE IS NULL
Update SQL Statement -
UPDATE SA_BO_SALES_TEST SET PROCESS_DATE='01-JAN-2006' WHERE PROCESS_DATE IS NULL
Document Name -
resultset
When i execute this scenario, The payload from any pipeline steps is
<?xml version="1.0" encoding="utf-8" ?>
- <resultset>
- <row>
<STORE>1021</STORE>
</row>
- <row>
<STORE>1021</STORE>
</row>
- <row>
<STORE>1021</STORE>
</row>
</resultset>
and it updates the Oracle table with PROCESS_DATE='01-JAN-2006' . But
One of the pipe line step "Request Message Mapping" is failed with the error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_STSSales_IDOC_BAPI_POSTR_CREATE~</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_STSSales_IDOC_BAPI_POSTR_CREATE~ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi Prasad,
<i>converted into the following XML wihtout any errors</i>
<i><?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_STSSales_SA_BO_SALES xmlns:ns0="http://zalecorp.com/sts_posdm_sales_10"><resultset><row><STORE>1021</STORE></row><row><STORE>1021</STORE></row><row><STORE>1021</STORE></row></resultset></ns0:MT_STSSales_SA_BO_SALES></i>
If you have given the name for your Datatype as "<ns0:MT_STSSales_SA_BO_SALES xmlns:ns0="http://zalecorp.com/sts_posdm_sales_10">", then the RESULTSET tag is not to be used.
You will have to enter this Value <b>MT_STSSales_SA_BO_SALES</b> in the SENDER JDBC ADAPTER > DOCUMENT NAME and <b>http://zalecorp.com/sts_posdm_sales_10</b> in SENDER JDBC ADAPTER> DOCUMENT NAMESPACE and then <b>Remove the Result Set tag.</b>
just take a look at the Document Name part of the JDBC adapter in this link,
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Regards,
Bhavesh -
hello friend ,
my xi-content scenario is oracle -> xi ->sapr/3
i am getting erro message in adapter monitor as following
Sender Adapter v0915 for Party '', Service 'oracle':
Configured at 04:26:46 2006-04-03
Last message processing started 05:17:12 2006-04-03
Error: SQLException during update 'TEST': java.sql.SQLException: ORA-00900: invalid SQL statement
last retry interval started 05:17:12 2006-04-03
length 60,000 secs
but update sql query is running fine on DB. still i am getting invalid SQL statement .
no message in sxmb_moni.
how should i check my jdbc adapter is running fine if it fine then what is error .
thanks friends.
amit ranjanAmit,
You are using a sender JDBC adapter. There are 2 SQL querries you write in a sender adapter(JDBC).
1. Select querry which selects the fields and fetch it to your XI server.
2. Update SQL. This is a crucial one coz you can not process same set of rows again and again. So you may want to maintain a flag. This happens here.
In your case update SQL querry does not seem to work.
Check it.
For more help post us the 2 querries(select & update).
Look into this link for info on config of sender JDBC adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
<i>(P.S: Reward replies that are helpful)</i>
Regards,
Jai Shankar. -
Broken pipe error in Sync Send JDBC Receiver: Extremely Serious issue
Hi forum,
I have a serious error in a JDBC->XI--> JDBC scenario,
Step1: I use a sender JDBC channel to select some distinct values from a table say X, and update the same rows,
Query SQL Statement: select distinct Branch from dbo.X where status = 0
Update SQL statement: update dbo.X set Status = 2 where Status = 0
Step 2: enter BPM
Step 3: enter a loop
Step 4:make a synchronous call to the same table X, to fetch some records,
SQL query: select * from X where status = 0 and Branch = i; Update X set status = 9 where Branch = i
Step 5: close loop, this loop iterates for 5 or 6 times depending on i, which is no. of branches selected by the sender JDBC channel
so all the calls are to the same table, same databsse(SQL Server)
the problem is when this sync calls happens in the loop, it some times gives following error, which i se in RWB:
<b>Error Unable to execute statement for table or stored procedure. 'X' (Structure 'STATEMENT_X') due to com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.transmit operation. Exception:Broken pipe (errno:32). Context:(2217)</b>
i have no way to trace the cause of the error, the database is perfect and the error logs in the SQL server shows no trace of any error,
Note: It works sometimes
i dont know whom to approach, pls help
the issue is very very serious as its in production system,Hi Sudeep,
SAP Note 846079 - XI 3.0 JDBC Receiver: # of Retries on SQL Error w/o Effect
Please check the following SAP note also - 831162
Some info which i found there and can be relevant in to your scenario.....
Q: I am using a JDBC Receiver Adapter in conjunction with the Lotus Domino Driver for JDBC perform an INSERT or UPDATE operation on a database. When sending a message to the receiver, the Adapter Monitoring shows the following error message:
"java.sql.SQLException: [Lotus][Domino Driver for JDBC]Invalid cursor state"
Is there a fix for this issue?
A: To work around this JDBC driver problem, activate the Advanced Mode for the respective JDBC Receiver channel and configure the setting "Number of Retries of Database Transaction on SQL Error" to a value > 0. Additionally, make sure that the setting "Database Auto-Commit Enabled" is also active as the Lotus Domino Driver for JDBC does not support transactions.
Apply note 846079 before configuring this scenario.
Q: The TCP/IP connection to my database host is running over an unreliable network connection, i.e. the connection is sometimes interrupted. Consequently, I sporadically receive an SQLException regarding a closed connection in the system trace or audit log or the connection as well as the JDBC Adapter channel are hanging.
How can I work around this connectivity issue?
A: Enable the "Advanced Mode" for the respective JDBC Adapter channel and select the option "Disconnect from Database After Processing each Message".
Note that this might put additional load on your DBMS due to the creation of a new database connection for each message.
I dont have access to a database right now, so i am not able to check this.
Also check the JDBC driver compatability as mentioned in the above note.
Cheer's -
Mapping Error with Sender JDBC- Idoc scenario
Hi Guru's,
I've got a simple asyncronous sender JDBC to Idoc scenario, and I encounter a strange problem with the mapping.
When I test the mapping it works fine, but when I run the scenario, only the first element (a constant) of the Idoc gets mapped, and mapping stops with no errors.
Does someone know where to find the error?
Thanks,
KarstHi Karst,
There might be several reasons that you do not see the IDOC structures are not created/mapped:
1. Most of the IDOC structures are optional (minOccrs = 0), so you have to make sure the structure itself (not just the fields within that structure) is mapped to something that does exist in the source data.
2. Make sure your JDBC generated source data does have the right namespace as you used in your mapping. I once had a similar problem, but finally found the source data generated in run time is slightly different from the one used in mapping in terms of namespace.
3. Test your mapping with the source data generated in runtime (you can copy it from SXMB_MONI). Then you may be able to find the problem.
Hope this helps.
Hart -
Problem in sender JDBC adapter
hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
SooryaHi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya -
Problem with Sender JDBC adapter using StoredProcedures
Hi All,
I am facing some prblem when i am using StoredProcedure. Please look at the error which i observe in the traces when i try to execute a stored procedure using Sender JDBC channel.
SQLException during query 'execute MAG_C0210.dbo.biz_mag_ubicaciones @data="MAG_C0210" , @idciclovida=" ", @idmaestro=" ", @idtiporeplicacion=" "':com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set
Please help me in this regard ASAP.
Cheers,
SooryaHi Praveen,
It is working fine when i executed the same in the SQL editor but when I use with XI it is failing with error
mentioned earlier. Please check this and help in solving this asap.
Regards,
Soorya
Maybe you are looking for
-
Setting the Home page that is not the Login-Screen
I would like users to see and initial portal page/community before they sign-in. This general information community is what they will see BEFORE they log-in. How do I set which one they see? I defined the default sub-community as this community, but
-
My computer is the Mac OS X Version 10.6.8 and I am unable to install the new iTunes 11.4. After I installed it, it said that once I restarted my computer, the new iTunes would be there. I restarted my computer and it is still the old version of iTun
-
Javac.exe shut down by windows2000
now i am using windows2000. when i trying to compile the .java file with 'javac', windows2000 prompt me a message "java.exe has generated an error and will be closed down by windows. You need to restart the program. A log file has been created." The
-
System Message with Yes or No Button
Hi Techies, I need value or which button pressed(Yes/No) for some validation. If i presses the Yes button only my coding should work. how can we get this. Thanks and Regards, Yadav
-
BC4J Client Data Model Definition Wizard does not dismiss
I'm a newbie trying to learn JDeveloper on my own to advance my career. I am following examples given in the Oracle9i JDeveloper Handbook by Koletzke, Dorsey, and Faderman. Everything has worked great so far until now. With the BC4J Client Data Model