Sending a signal to 1 of 2 different pins on a DAQ device

I am trying to make a VI that simply sends a digital signal to 1 of 2 pins on my DAQ device. Is there an easier way to differenciate between the two pins then using two different virtual channels?
Attachments:
test1.vi ‏12 KB

Here you go in 8.6. Also, please note to read two lines you will have something like this in the channel constant: Dev1/port0/line0:1
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies
Attachments:
test_modified.vi ‏11 KB

Similar Messages

  • How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

    How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
    What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
    Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

    FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

  • Apple TV is not sending a signal to the tv, how do i fix this?

    There is no signal coming from the Apple TV, according to the two television sets that I have connected it to.  I have tried using different HDMI cords as well.  I have also tried to plug it in to different HDMI ports on the the television sets.  I have also reset the Apple TV box.  Was there a recent update to the software? I have had the Apple TV for three months now and it was working until today, 9/14/13. How can I get the Apple TV to send a signal to the tv?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • Mac mini, isn't sending the signal to my LG flatron L204WS monitor

    Hi
    Suddenly tonight my mac mini is not sending the signal to my LG flatron TV (it's worked fine for the past year).
    The troubleshooting I have done so far with positive results is:
    1. installed the mac mini on a 32" tv using a DVI to HDMI cable - works fine
    2. installed the mac mini on a 32" tv using the existing VGA-VGA/DVI adapter (same configuration used on LG) - works fine.
    3. use the LG flatron to connect VGA-VGA with my laptop - works fine.
    ??????? any ideas?????
    thanks
    L

    HI
    Thanks for replying, in pure desperation I opened her up and blowed away the dust and tried it with the top off. Hey presto she booted up to the flatron no problems.
    thanks

  • By entering App store I get a message that a software update, but this software I have never installed on my computer if I want to upgrade what message he sends me a says this with a different account to mine, will not let me update. If I install this sof

    By entering App store I get a message that a software update, but this software I have never installed on my computer if I want to upgrade what message he sends me a says this with a different account to mine, will not let me update. If Iinstall this software (FACEBOOK), I put as account user account that is not mine, if you change to my account, send an error and will not let medesacragarlo.As I can remove the software actaulización notice?

    Hi...
    I replied to you here > https://discussions.apple.com/thread/3851006?tstart=0

  • I need information about sending a signal to Flexmotion board

    how can I create a VI which will send a signal (like sine wave)to Flexmotion board

    Could you please be a bit more specific? Do you want to send a sine wave to an analog output of the board? Which board are you using? Do you want a motor move with a sine wave formed velocity profile?
    Regards,
    Jochen Klier
    Application Engineering Group Leader
    NI-Germany

  • Sending a signal to an exec'ed process

    I have wrtitten java code to Runtime.exec the dbx debugger on solaris and I am happily interacting with it thru the Process input/output objects.
    What I now need to is send the signal SIGINT to that process to cause the dbx interrupt.
    What is the best way of sending signals to processes from a java app ?
    Thanks,
    Neil

    What is the best way of sending signals to processes from a java app ?
    Runtime.getRuntime().exec("kill -2 " + pid);Oh, wait, you say: how to get the PID? Now that gets a bit more complicated. You'll have to either exec "ps" and read the output, or resort to some other trickery, like having your child process write its PID to stdout and reading that into the parent.
    (The latter can be done by wrapping the child in a shell process which echoes $$ and then exec's your real process).
    All grotty, I know, but then Java only exposes functionality that can be portably implemented on all OSes, and you can't do any of this stuff on Windows (no concept of "child" or "parent" processes, or interrupt signals, or dbx, or anything..)

  • Airport Time Capsule stop send wireless signal, Airport Time Capsule stop send wireless signal

    After instaling several times, alway after a while the wireless router stop sending the signal, or does not start up like in the morning, especially from a windown computer.
    Out house have several computers in Windows and Mac, iphones and ipads and itouch mac book pro,
    How come the router will not start up after a "night of rest"

    Unfortunately, a solid amber is light is not a good sign.
    Try a complete Factory Default Reset on the Time Capsule using the steps below. This procedure will not affect any of the data that you have stored on the internal hard drive.
    Power off the Time Capsule for 15-20 minutes or longer
    Hold in the reset button on the back of the Time Capsule first, and keep holding for an additional 9-10 seconds while you simultaneously plug the power back in to the Time Capsule
    Release the reset button after the 9-10 hold period and allow a full minute for the Time Capsule to restart
    The Time Capsule light should normally stay solid amber for about 30 seconds and then change to a slow, blinking amber light, indicating that the Time Capsule has been reset and it can now be reconfigured.
    If you try the Factory Default Reset a few times and the light stays solid amber, unfortunately the hard drive has failed, or there is an internal power supply issue with the Time Capsule.
    You should take the Time Capsule to an Apple Store.....if you have one in your area.....or contact Apple Support directly to discuss your options. 
    http://www.apple.com/support/contact/
    If the Time Capsule is out of warranty or not covered by AppleCare, Apple will not offer repairs but there are some shops that specialize in this type of repair. See this link for more details:
    Apple Time Capsule Repairers

  • I have a power mac G5, when starting up doesnt  send no signal to the screen at all

    My name is Emilio1991 and I have problems starting it up, I hit the power button and it start great but it have a problem it doesnt send not signal to the screen at all, I thought it was the video card and buyed a new one and it still with thet same problem I try to find solutios and nothing about that can some one help me with that/???

    Couple of more ideas...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    See which one your G5 has...
    http://eshop.macsales.com/item/Newer%20Technology/CR2032/ 
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 

  • Failed to send start signal for complete cluster, SLD may still be stopped.

    Hello,
    I am trying to create technical systems in the SLD on the portal (http://host:port/sld). It prompts me to start the SLD server by going to Administration.
    When I click the button "Start Server" under Administration, I get this following error message:
    "Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
    Can you please tell me what has to be done to successfully start the SLD server so that I can go ahead and add technical systems.
    Thanks
    Srinivas

    Hi Siddarth,
    I checked MMC. There is only one instance running.
    Here is the structure in MMC.
    Database
    Instance 0
    Instance 1
    Instances are green and running.
    Here is log on the server:
    #28 12/12/2008 07:43:44.413 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More...
    #27 12/12/2008 07:43:44.397 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More...
    #26 12/12/2008 07:43:44.382 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
    #25 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.webui.CimIO: Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.
    #24 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
    What could be the problem.

  • How connect to device that sends Midi-Signals via USB?

    Hello,
    does anybody know how to communicate with a device that sends Midi-Signals via USB? I am working with Windows XP. I would appreciate any kind of hint.

    rothencharl wrote:
    Hello,
    does anybody know how to communicate with a device that sends Midi-Signals via USB? I am working with Windows XP. I would appreciate any kind of hint.You need a bit of hardware that converts USB to ordinary RS232; you can use RXTX then to get the data in; there you can do with it whatever you want.
    kind regards,
    Jos

  • Sending POSIX signal to an external subprocess from a java program

    I'm programing in forte for java under linux-mandrake, I've execute an external subprocess with the runtime and Process clases, I need to send the 2� POSIX signal to this external subprocess, I mean de SIGINT signal, I know that you can send a signal from a shell just doing:
    Kill -2 pid // the SIGINT signal is the 2 POSIX signal
    I know that there is another system-call like : kill(int signal, int pid) that any one can send from a c program.
    Althought I don't know how can I get the pid of a suprocess, because I Know that there is the systemcall in c like:
    int getpid() wich gives the pid of the current process, but I need to have the pid of a subprocess not the current one.
    The thing is that I do not know how can I do it from a java program, I mean that to send a signal to a subprocess it will work using system-calls, but I do not know if I can insert system call in a java program, I've been thinking about doing it using a linux script like:
    #!bin/bash
    $a = pidof /home/maude-linux/bin/maude.linux
    # this is the path of the process wich is running
    kill -2 a$
    and the run this script from a java program doing an exec(sh script.bin)
    but by the moment I must be doing something wrong in the script because I find mistake in it, it gives me mistake in the assign sentence , I mean:
    $a = pidof /home/maude-linux/bin/maude.linux
    # this is the path of the process wich is running
    I'm not used to program shell scripts, perhaps I'm doing something wrong, is there something wrong in this sentence?.
    I would aprecciate some help about this, or if somebody have some idea how to do it in java, I repeat I need to send a signal to a external subprocess wich is launched from a java program by the process and runtime clases, and I need to send a SIGINT signal to the subprocess, I hope that some body can give some suggestion or some code explaining the situation

    Are the portions of bash-code verbatim in your post?
    When yes, they look suspicious!
    Instead of
    #!bin/bash
    #!/bin/bash
    would be better.
    $a = pidof /home/maude-linux/bin/maude.linux
    does not look good either.
    If you have command "pidof" telling the pid based on the path name of the executable passed to it as its argument, you can have the output of this program in a shell script like this:
    a=$( pidof /home/maude-linux/bin/maude.linux )
    Then through $a you will refer to the value of the variable "a":
    kill -SIGINT $a
    A pidof script could look like this (apart from error handling):
    ps -ef|awk '{if (NF>=8 && $8=="'"$1"'") print $2;}'
    This works for me; your mileage may vary.

  • How I can send a signal to a process

    I use a Process.start() to run a extenal program, then I want to send a signal, such as ^C etc to this program.
    The process class is too simple to do this.
    How can I do this?
    thank

    I use a Process.start() to run a extenal program,
    then I want to send a signal, such as ^C etc tothis
    program.
    The process class is too simple to do this.
    How can I do this?If Process is too simple: JNIThanks first.
    I tried to use JNI. But I can't get the native Output/Error output.
    How can I get the native's Output? Or is there a method like Process.getInputStream()/getErrorStream()?
    thanks

  • Thank you. Ok, that was a surprise. Thought that almost every fm-transmitter just could send the signal by air to the antenna of the car.

    Thank you.
    Ok, that was a surprise. Thought that almost every fm-transmitter just could send the signal by air to the antenna of the car.

    Not sure what your post is a reply to but that is what they do

Maybe you are looking for