Sending e mails after Spell Check

My e mails do not send after spell check is complete. The e mail goes through spell check and when I am done and close the spell check window it doesn't automatically send. I then have to click the send button again. Any suggestions?

It is working as I wanted now. In Mail I did the following: Mail>Preferences>Composing, then in the top dialogue box Composing I chose Check Spelling> When I click Send. Not a very complicated solution but it works for me. When I finish an e mail and click send it now goes through the spell check and then automatically sends once I finish the spell check. I hope that is what you were asking.
B

Similar Messages

  • How I fixed the "can't send e-mail after upgrade to 10.5.6" problem

    Like many of you I couldn't send e-mail after the upgrade. After trying everything including re-install combo update, delete and resetting profile, etc. the thing that made it work was:
    1. custom set the outgoing server port number to 25 (for Verizon, ask your ISP the output port number)
    2. ensure the password authentication is set for outgoing e-mail.
    Goto account setting, "Outgoing Mail Server (SMTP)", select "Edit Server list"
    Under "Account Information" make sure "Description" is blank (as suggested in other posts)
    Under "Advance Information", select Use Custom Port: type in the port number
    On Authentication, select password, type in user name and password as in "incoming Mail Server"
    Save it and test if it works.
    It seems selection of the default outgoing port has some problems, even though 15 is one of the three defaults.
    Scott

    I just switched to Roadrunner and am having the same "can't send email" problem. I have done what you suggested, but the problem persists. I did note that in my outgoing mail server box it says: smtp-server.wi.rr.com:jzelinger3 (Offline). I'm not sure where the "Offline" is coming from or why it is there. Any suggestions? I performed the following Terminal tests with a tech. support person from Roadrunner:
    Last login: Wed Jan 21 19:36:52 on console
    CPE-75-86-226-41:~ joan$ telnet pop-server.wi.rr.com 110
    Trying 71.74.56.78...
    Connected to pop-server.wi.rr.com.
    Escape character is '^]'.
    +OK POP3 server ready.
    user [email protected]
    +OK please send PASS command
    pass laikatess
    +OK [email protected] is welcome here
    telnet smtp-server.wi.rr.com 25
    -ERR Invalid command; valid commands: CAPA, DELE, LIST, LAST, NOOP, RETR, RSET, STAT, TOP, UIDL or QUIT
    This is very frustrating.
    J. A. Zelinger

  • Mail sends pre-maturely BEFORE spell check completes!

    Recently upgraded to 10.8.5 on an iMac and am experiencing premature SENDING when using the "check spelling when I hit Send" option in my mail account. I am using a gmail account.
    If I move the curser into the body of the email to manually correct something, WHILE spellcheck is running, the email just FLIES out and gets sent prematurely! I do not hit "send," because the spell check is NOT FINISHED conducting its check. It sends prematurely.
    This is a bizarre development. Since i have used the Mail program on this same imac for years,
    Started seeing this regularly with the OS upgrade to 10.8.5.
    I was told elsewhere to look for a ".plist" file in my Library. I have located NUMEROUS .plist files but I am not sure what to do with them.
    Needless to say, far too many of my emails are being sent without proper editing! Problem is embarrassing!
    Please HELP!   

    From the Mail menu bar, select
    Mail ▹ Preferences... ▹ Accounts
    Select one of your IMAP accounts in the list on the left, then open the Mailbox Behaviors tab, Uncheck the box marked
    Store draft messages on the server
    Do the same in your other IMAP accounts. Save the changes when prompted.

  • How do I stop Mail from spell checking URLs and re: text

    I send and receive emails with urls a lot and Mac Mail 2.0.5 spell check consistently asks for corrections to the urls. Is there some way to tell Mail not to spell check words with a /, @ or other symbols?
    When I reply to someone elses email it allways tries to correct the orginal email also which I'd like to avoid.
    Occasionally it catches words like "Thanks!!!" and I can't get rid of the spell check window untill I remove all the "!" symbols.
    Any help appreciated!!!
    Thanks,
    DAN
    PowerBook G4   Mac OS X (10.4.4)   Mail 2.0.5

    Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
    Rebuild mailbox
    If that doesn't work, try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
    Reindex messages      Mavericks/Yosemite

  • Fatal, unrecoverable error in FM and RH after spell-checking

    I have TCS 2.5. Last month, a few hours before our product release, I was spell-checking my RoboHelp HTML 8 project and had FrameMaker 9 open at the same time. Suddenly, Frame crashed with the dreaded internal error message, and I could not get it to start again. Soon after, RH also crashed and I couldn't get it to run again, either. Fighting back panic as I tried uninstalling and reinstalling to no avail, I finally installed trial versions of Frame 10 and RH 9, and I was able to at least get my docs out for the release. But it wasn't until today that I finally figured out what was causing the problem. I noticed that the programs were crashing after loading the fonts and right when it got to the localization part, so I figured it had something to do with my dictionaries, but I couldn't find any files in my TCS folder that been updated that day. Finally, I found files here: C:\Users\myUserName\AppData\Roaming\Adobe\Linguistics\Dictionaries. I found an "added.clam" file that was last updated right before the crash. I deleted all the directories in the Dictionaries directory, and now Frame and RH are working again.
    Hopefully this will save someone the stress I endured, as I couldn't find anything about this on the forums at the time, and it was only by chance that I finally found these folders.

    Solved

  • Since 2.1 I cant use Mail after having checked mail with iPhone

    This is totally weird.
    My Mail OS X application is working just fine. So is my iPhone mail app. However,
    If I check my mails with iphone (Everything works fine) and then open Mail OS X within the next 3 minutes when I try to check for mail all accounts besides Mobile turn gray and I cannot do anything till after about 3 minutes.

    Update...
    If I open mail right after having checked my mail with the bugphone I get the grayed out mail boxes. However, if I go in and toggle SSL on advanced, save the account settings and then toggle back to SSL and then save again then everything is fine.
    Looks like this is a bug... Just yet another in the mile long BUT SHORT history of Apple's iPhone 3G.
    Spoke with german telekom today. They told me and you can quote me on this:
    "Since the 3G iPhone and all it's bugs we dont even try to help out customers but direct them directly to Apple - Free of charge"
    Then you wait a minute and then Apple Care appear on the phone but DO NOT represent themselves by "Apple Care Hello" but only state their name... After asking MANY questions the poor guy finally admitted that I was at Apple Care and that Telekom were not able to handle all the problems.

  • Mail's spell-checking set automatically to British English in Snow Leopard

    Upon upgrading to Snow Leopard, the system wide spell checker is set to British English. Any ideas how to change it to American English?

    Try going to the "language & text" preferences, select the "text" tab and look for U.S. English.
    I always thought "U.S. English" was an oxymoron.

  • Can't send e-mail after upgrading to Leopard

    I recently upgraded my OSX from Tiger to Leopard. When I log into my Mail account, everything appears to be working fine; I can receive mail, compose messages, etc. But the "Send" button is grayed out. I don't get any prompts asking for permission to send -- it's simply not an available option. Is this fixable, or do I need to re-install?

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • Send e-mail after change document status solar02

    Hi...
    How is possible to send an e-mail for someone or a group, when a especific document status is changed to a new value?
    Thanks in advance,
    Warlei Figueiredo

    Hi Federico,
    Thanks for your tip about how to send an email. So, I am trying to send email in my scenario and I don't know if I am choosing the correct type status. I have two questions:
    1 - In SE16 transaction, into table TJ30 I dont know what transaction type to select?
    2 - Is necessary choose "Depend Partner"? I don't know what kind "Depend Partner" is possible to choose.
    Reminder, my necessity is to send an email to someone (doesn't matter in this moment, could be an especific user your choose) after an specific document into solar02 changed status from "A" to "B".
    Thank you if possible to help me.

  • Send a mail after Post Document

    Hi,
    My proiblem is : I have a Parked document wich it has to be posted  in FBV0 or MIR7 ... after that an Specific user Should receive a mail..
    Somebody knows a exit/badi/BTE  for solving my problem?
    Thanks

    Hi
    For MIR7, see SAP Note 1156325 - BAdIs in the Logistics Invoice Verification environment and check the possibilities to do it.
    I hope this helps you
    Regards
    Eduardo

  • Can not send e-mails after iOS5 upgrade

    I upgraded my wifes iPhone to iOS 5. After the upgrade she can receive e-mails but can not send them. All the composed e-mails end up in her outbox. I click on the error and it says "The connection to the outgoing server "smtp.***.com" failed. Additional Outgoing Mail Servers can be configured in Setting>Mail, Contacts, Calenders."
    Anyone have any suggestions?

    Go to Settings => Mail,Contacts,Calenders => select the account and may have to click account again => should be viewing username and password, Scroll down and Select - Outgoing Server => Tap on Primary Server => try entering Username and Password in there even though it says optional... Also try port 25 if that doesn't work and try toggling SSL on/off if that doesn't work.

  • OIM stopped sending notification mails after patch

    Hi all,
    We're currently developing an OIM system for a client. We patched the system using patch #8484010 from 9.1.0.1 to 9.1.0.2, after which the system wasn't able to send any task assignment notification mails to the assignee. I'm not 100% sure that it has something to do with the patch, but it seems like it has. There is nothing significant in the logs, even with relevant logging levels set to ALL. Did anyone else stumble upon such an issue? If not, does anyone have a clue?

    Try following the instructions in the below thread to fix the issue.
    https://discussions.apple.com/message/18170959#18170959

  • Cannot send internal mail after basic setup

    I have setup Exchange 2013 SP1 on Server 2012R2 from scratch. I have added AD users and setup all the mailboxes for them.
    However, when I try to send email from OWA to internal mail accounts, other users cannot receive and mail at all.
    I have tried to send a email to my own account and I still cannot receive anything.
    There is no other setting I have done at all.
    Please let me know what information I need to provide to solve the issue.

    Hi,
    From your description, I recommend you follow the steps below for troubleshooting:
    1. Enable "Basic Authentication" on the properties of Receive Connector.
    2. Use the Test-ServiceHealth cmdlet to check if all the Windows services that Exchange server requires are running. Especially the Exchange Transport service and Mailbox transport service.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Cannot send msn-mail after the update

    After the update of OS X, I cannot send email (via httpmail) using my "old" msn account through Mail (prior to the update, I had no problems). Getting the mailbox updated, reading mails etc. is not a problem.
    Tried reinstalling httpmail.
    Tried changing the Server Port to 587.
    Hints would be highly appreciated.
    Lars

    Mail.app is short for the Mail application that I assume you are using as your email client to receive and send messages with your email accounts.
    If this is correct and to confirm, you are accessing an email account provided by your ISP (which is Verizon) with the Mail.app in addition to your Hotmail account and you are able to send messages with your Verizon account but not with your Hotmail account.
    If correct, go to Mail > Preferences > Accounts and under the Account Information tab for your Hotmail account preferences at the SMTP server selection, select the Verizon SMTP server to send messages with your Hotmail account and when quitting Preferences, select OK to save the changed setting when prompted.

  • Cannot send Yahoo mail after IOS 4 upgrade iPod touch 3G

    Hi,
    Using a free Yahoo account configured by entering username & password. Can receive mails OK but fail to send with the error "A copy has been placed in your Outbox. The sender address "<[email protected]>" was rejected by the server". Was working perfectly for months prior to upgrade. Any thoughts?
    Thanks

    Having the same problems with my "PTD" email account. Before iOS 4 it worked fine, now I can receive emails with no issues but I cannot send them, they will not go through.

Maybe you are looking for

  • How to change the text in default selection screen

    Hi,   I have created the default selection screen(using PNP Logical database) ,In that I wants to display 'Data Selection Period' instead of 'Period'. Please send me the related code. Thanks in advace mohan

  • Javac command line problem

    Why might the javac.exe, java.exe, and javaw.exe command lines not stay open? When I open these files, the command line flashes open and immediately disappears. I tried opening these files using "Run as..." and unchecking the "Protect my computer fro

  • Why can't I add an image to my new project in adobe premiere elements 11?

    It keeps coming up with the same error no matter what image I try to add to my project. Error Message:"The importer reported a generic error."

  • Lion installed, forgot username and password!

    I bought a macbook pro for a school in the Philippines, and they just downloaded & installed Lion, and just restarted. They're telling me they forgot their username and password and have gone through every password they used. Maybe a kid changed it b

  • OWSM SSL Configuation using Gateway

    Hi, Can anybody tell about configuring SSL using OWSM Gateway? Regards, Govind