Sending email from webmail adds a www to from address

So the subject says it all...when I send an email from webmail it sends as:
[email protected]
Normally it's:
[email protected]
Is this a DNS or webmail issue? Thanks.
James

It's a configuration issue. By default, Squirrelmail tries to substitute the web server name for the domain name. You can change this on an Squirrel mail level by running:
sudo /usr/share/squirrelmail/config/conf.pl
Go in to 2. Server Settings and change the Domain. By default, it tries to just use the domain that you loaded webmail over, so if you do virtual hosting and have webmail running at multiple hostnames, you can use this to your advantage.
Any user can override what's set here in their Squirrel mail Options -> Personal Information.

Similar Messages

  • TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

    Restating my issue / question...
    When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
    Hence, I have ruled out the issue is a yahoo mail matter.
    Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
    Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
    Any ideas?
    GMc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • "Sender Name is Invalid" (can't send email from POP account) iPhone 2.1

    I updated from V2.0.2 to V2.1 today. I also swapped out my original iPhone EDGE for a new iPhone EDGE due to unrelated problems with the speaker.
    Upon testing things after restoring from backup to the new phone I discovered that I could no longer SEND email from my POP account. I could receive email just fine on that account. Sending and receiving email on my MobilMe account also worked, as did sending and receiving email via the POP account while on the Mac computer I use to sync with this iPhone.
    After digging into this with AppleCare we discovered that somehow the Port Address for the Outgoing Mail Server for that POP account had been changed from 25 to 587 on the iPhone.
    Changing it back to 25 fixed my problem.
    We don't know whether the problem was due to the 2.1 upgrade or due to something in the restore process after swapping the phones.
    If you get the error message "Sender Name is Invalid" while trying to send email from a POP account on your iPhone, go to Settings > Mail, Contacts, Calendars and select the line for your POP account.
    Now scroll down to the Outgoing Mail Server entry which should show "SMTP" and the name of the outgoing mail server for that POP account. Select that line. This will display a list of servers with your POP account server showing at the top as the Primary Server. Select that line.
    In the panel that displays, check the Server Port. If it is something odd like 587, that may be your problem. Select the line and you can edit it to something more normal like 25. Touch the "SMTP" button at the top left of the number entry screen to accept that new value.
    We discovered that after correcting that value on the iPhone it STAYS corrected even after doing a new Sync with iTunes, or after MobileMe syncs.
    --Bob

    Sorry you had problems Bob.
    Depending on the mail service you are using, Port 25 or Port 587 are usually acceptable for outgoing
    SMTP mail. Many cafes will block the customary port 25 to prevent spammers from using their
    wireless access.
    There is a superb tutorial posted here:
    http://www.webmail.us/docs/support/Macintosh-OSX-Mail.pdf
    Also be sure for each mail account to turn ON the secondary AT&T server shown at the bottom
    of the SMTP server list for each account -- it will make your transition from wireless to Edge
    to 3G networks much more reliable.
    Thanks for sharing what you've learned. Hope this helps.

  • Unable to send email from iPhone or ipad, Unable to send email from iPhone or ipad

    Recently, I have become unable to send emails from my comcast email account.  I tried uninstalling and reinstalling the account, but get an error (Cannot send. Username or password for Comcast invalid).  The username and password are correct, though, as my email works fine on my non-Mac laptop. Any suggestions?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • Cannot send email from outbox

    Why can't i send email from my outbox? Mail is blocked from coming in also.

    Check your settings, maybe the mail index is at fault.
    Setup Wizard and troubleshooting tips:
    http://www.apple.com/support/mail
    Also has a link to Mail community section.

  • Cannot send email from my iPad

    The last few days I cannot send email from my iPad. I can receive normaly.
    Here is an image of the error I get. I get this error with every receipent... Please help

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Unable to send emails from any Apple devices

    Since BT made the changes to Yahoo mail i have had problems with sending emails from my ipad and iphone (IOS8). The only way that i can successfully send an email is to log onto my laptop and send from a windows platform. I have checked all of the settings which are correct and im stumped. I am continuing to receive mail so why cant i send mail? I have contacted the BT customer support to be told that they are not trained on ios platforms so they cant help! pretty gobsmacked with that reposnse tbh, anyone have any ideas?

    You may want to delete the email account and try setting it up again. Once you have deleted it, re-start your phone.
    Set it up manually and do not use the wizard.
    It is best to go through settings >mail contacts, calendars > add account… > don’t choose the BT or BTYahoo option, tap the ‘other’ option from the bottom of the list > Add Mail Account and enter the following details:
    Name – it can be anything you want, but usually your real name is preferable
    Address – your full BT Internet email address
    Password – your email account password
    Description – this can be used if you have more than one email account on the device but put something like ‘work’ or  ‘BT Internet
    Press “Next” and allow the verification (this may take a few minutes)
    On the next screen it will want you to input incoming and outgoing mail server details:
    Tap ‘IMAP’ at the top,
    Incoming mail server settings:
    Host name: mail.btinternet.com
    Username: your full  BT Internet email address
    Password: your email account password
    Outgoing mail server settings:
    Host name: mail.btinternet.com
    Username: your full BT Internet email address
    Password: your email account password
    Press ‘next’
    Slide the notes and mail to be ‘on’ and press ‘save’ in the top-right
    Check your email on the device and see if it is working. Try sending yourself a message and see if it arrives. If messages are not able to send do the following:
    Additional setting changes
    Go to Settings > Mail, Contacts, Calendars > tap your BT email account > a window will appear, tap on your email address > scroll down to the bottom of the window and tap where it says ‘SMTP’ > tap the primary server (which should be mail.btinternet.com) >make sure the following is on or enabled:
    ‘Use SSL’ should be ‘ON’
    Authentication should be ‘password’
    Server port should be ‘465’
    Press ‘done’ in the top-right

  • Can not send email from Mac, iPhone, or iPad using mail using iCloud.

    I can send email from the icloud web page but I get error messages that the icloud outgoing server is not recongized when I send email from my iphone, ipad and Mac mail.  I can receive icloud email okay on all devices.  I have manully setup a icloud server per instructions on icloud support page for mail's outgoing server name.  It still is not recongized.

    I found a work around that works.   Got to Settings...Icloud....account......advanced....outgoing mail server.....
    Add an "other" server.
    Host Name p01-smtp.mail.me.com
    Put in your me.com email address as username and your Apple ID password
    SSL is on
    Authentication is password
    Server port 587
    This worked for me.....I will use this until the bug is fixed.     Don't make this server your primary.   Leave it in "on" status in the other category.
    Good luck

  • Cannot send emails from my new ipad but can receive them. iPhone 5 ok. Both iOS 6

    Can't send emails from my new ipad but can receive them. I've checked the settings and username and password are setup correctly. My email account is with tiscali. My iPhone 5 is setup the same but works ok.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Cannot send emails from my Ipad

    I am able to receive email on my IPad and Iphone 4s, but I am unable to send emails from these devices.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • TS3899 cannot send email from one of my email accounts on my iPad

    I am able to receive email on one of my email accounts on my iPad but I cannot send email from that account.  I've obviously missed a step in the set up process but do not know what that step might be.  Can anyone help?  Thanks

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.htmlhttp://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.htmlhttp://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I can not send email from my iPad . Says SMTP is incorrect

    Why can't I send email from my iPad ?  It says my SMTP is incorrect but it will not let me correct it

    Hey Me520,
    Thanks for using Apple Support Communities.
    This article provides troubleshooting steps for Mail issues.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    Have a nice day,
    Mario

  • How do I fix Mail in Snow Leopard where I cannot send emails from my account to another account I've set up in Mail, but the reverse works fine?

    I have a problem with Mail in Snow Leopard in that I cannot set up two email accounts for myself and my wife with the same ISP and have them operate properly.  I've set up the accounts in strict accordance with my ISP's instructions for setting up email accounts on Mac Mail but I cannot send an email from my account to my wife's without a drop-down message appearing that Mail 'cannot send the email from this server.  Please edit the server list'.  No amount of tweaking appears to work.  Applecare consultants have so far been unable to get it to work and a recent visit to the local Genius Bar in the Apple Store was fruitless also.  My ISP's help line was unable to solve the problem even with a supervisor level consultant.  The ISP concluded it was some kind of 'bug' in Mail.
    I could send emails from my wife's account to mine, but not vice versa; I could send emails to other addresees without any problem and I can send emails from my account to my wife's using the ISP's webmail.
    Does anyone please have a solution to my problem?  At the moment we're operating one account (mine) on my Macbook and my wife's is set up on her iPad2.  As we prefer to use the Macbook for storage and (using Time Machine) for back-up of our data, the two accounts on separate machines is a nuisance.
    Another factor is that I prefer to control when I download emails and set my preferences accordingly.  One of the so-called 'fixes' that were tried wound up downloading emails regardless of settings, even after removing my wife's account; the matter was remedied only after I had removed all accounts form Mail and started afresh from scratch.

    You'll have to pardon my ignorance of some  computer terminology; I'm a retired manager and not a computer technician, hence my muddling up of client and server terminology.
    Re your comment about Port 339: I did qualify this with (?).  As I wrote, it all happened at lightining speed and the guy at the Genius Bar didn't bother explaining what he was doing.  Port designation contained 3s and 9s to the best of my recollection.
    That said, you seem to be spot on re setting up a 'dummy' client in Mail.  I set it up as you suggested and I can send to and receive from this client without a problem.  You appear to have identified the solution, notwithstanding the claims of the ISP's 'experts'.
    The next problem I have now is sorting out my wife's mailbox that is so troublesome whenever I set it up on Mail.
    All the other set-up advice to date yielded a similar result; inability to send from my account to her inbox.  Perhaps deleting her details from the account altogether and setting them up again from scratch may be the solution and I shall try that in due course.  The impediment that I have with this at the moment is that my ISP admits that it has 'a technical problem with its email servers' and some of its related web pages that prevent my doing this myself.  I will have to go through the telephone 'help' line and ask the technician to set it up at their end on my instructions.  This has some disadvantages in that I have to divulge the password to the account to the operator rather than keeping it anonymous by doing it on-line.   You may have solved the problem, but until I can successfully sort out a working mailbox for my wife i cannot definitively say so.
    Many thanks for your perseverance.  You've made more sense than anyone else so far and that deserves some points, surely?

  • TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

    Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • TS4069 Can't send email from msn hotmail account on iPad or iPhone.

    Having trouble sending email from msn account on iPad 2 and iPhone 4. Can receive email just can't send it. Keeps saying the password or account name are incorrect when they are not. Can send and receive email when enter msn through safari.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Cannot send emails from mac email address

    Over the past 24hrs I am unable to send emails from my ibook and sporadically from my iphone. Please advice what the settings should be for SMTP and port. I think this might be the problem but I am unsure. I have a mac email address. I can send emails from my icloud account. Any help would be appreciated. Thanks

    Wow, after research I can't believe what a problem BT is!???
    This post by vanessa seems to have gelped many that could not send...
    Just set up my macmail with the help of the BT guys after a year of struggling! Hopefully this could work for others for whom the emails will receive but NOT send....
    Set up your 3rd party domain names via the mail relay system and confirmed via BT. Then try these settings.....
    In your @btconnect.com email set its up using these:
    incoming mail server: pop3.btconnect.com
    username: the bt email
    password: the bt email password you supplied
    outgoing mail: we'll come to this!
    on the drop down box next to Outgong mail server (SMTP) select 'edit SMTP server list'
    press '+'  button and add these details....
    In the Account information tab:
    Description: mail.btconnect.com
    Server Name: mail.btconnect.com
    In the advanced tab:
    Select 'Use default ports'
    Authentication: Password
    username: the bt email
    password: the bt email password you supplied
    NOW The next bit, the 'second' server....
    press '+' fro a new server add these details....
    In the Account information tab:
    Description: second server (or any name you want)
    Server Name: mail.btconnect.com
    In the advanced tab:
    Select 'Use default ports'
    Authentication: NONE!
    Now on all your email addresses back in the accounts section, set the SMTP server to 'second server' (or whater you hae called it) NOT mail.btconnect.com and select Use only this server.
    http://business.forums.bt.com/t5/Email/How-to-Set-Up-Mac-Mail-OSX-Lion-inc-mail- relay-Message/td-p/30323

Maybe you are looking for

  • SetTnxNoSync: No disk access before a sync

    Hello, I try to use Berkeley DB to store a lot of KV.The software must index a lot of data (put/get) and then wait for resquest from user (get) or new information for the index (put/get). During the big indexing phase, It should be great if Berkeley

  • Help! Trying to add bridge photo gallery to web page in CS4

    I am new to this and have created a photogallery in bridge.  I uploaded the files to my server and they don't appear anywhere.  How do I save them and then add to the page using dreamweaver cs4?   All of the tutorials I find show how to create them n

  • Reinstall Generates Error

    I have a 2008 Mac Pro that I'm trying to re-install the original software on. I run the Install program, and while it's loading from the disc the computer locks and generates an error stating that states I need to restart the computer. I've tried thi

  • P2/MXF Footage in Premiere Pro CS6 constantly losing its linkage.

    P2/MXF Footage in CS6 constantly losing its linkage.  I'll relink the clips as the 'locate footage' box pops up, then a couple of minutes later, all the clips in the bin are showing the question mark and asking me to locate the clips again. It does t

  • Can I cancel mail job from SOST queue and make its status to be error or red

    Do you have any idea to cancel mail job from SOST queue and make its status to be error or red (msgno = 806) by using coding ??