Sending HL7 Message from ISH system to External System

Hello Friends,
I am trying do configure our SAP ISH system to send HL7 messages to External 3rd party system. I did my research on SAP HCM module.
I am trying to send HL7 message using SAP XI system. Any help on what version of XI is required and SAP ISH is required would be great help to me. If there is any help document on setup required would also be great help to me.
Thanks for the help.

Hello Vasu
What is the format of message your 3rd part system request and on what protocol?
To my knowledge the Healthcare applications and laboratory information systems require HL7 message format over MLLP protocol.
If this is your requirement then you should use SAP PI 7.1 EHP or PI 7.3 and request to SAP for IAH Adapter. To know more about IAH and its usage in healthcare integration please refer to my blog at http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a00aabd6-a7f8-2d10-1c9e-bdaf085ab075.
Good Luck
Vj

Similar Messages

HL7 message to SAP system

Hi all,
What are different ways to send HL7 message to SAP system. I am thinking about conversion agent, java proxies, iway adapter. Please help me what are the different advantages and disadvantages and any other techniques.
Your help is reward able.
Thanks
Deviprasad Pothireddi.

Hi,
Its better u use Conversion Agent,i have done some POC on Conversion Agent,in that HL7 format can be selected it will come with the software defaultly, u can easly convert the HL7 data into XML format.
Regards,
phani
Reward points if Helpful

Not able to create a message from satellite system

Hello Everyone.
We have been working on Solution Manager .We have managed with successfull installation,Uploaded required support packages,configured the system according to SAP Solution Manager Guide.
Faced with some problem regarding support desk,we are not able to create a message from satellite system to Solution Manager.
Note : Error Message related to this problem is ....
"Error in Local Message System : External number assignment, Enter notification num message was not Created."
Thanks in advance.
Regards,
Nimesh V . Master

Hi, you need to check the number ranges for the notifications and make sure they are correct. Look in the IMG of the SAP Solution Manager system for the instructions. You also need to make sure that the Service Desk BC Sets are activated if you are NOT on 4.0 and SP Stack 09+. In the later SPs much of this configuration from the IMG is automated in the wizard.

How to send a message from server to a particular client

Hi all,
I need to send a message from one host to another host which are connected in local domain. Now I'm able to send a message from client to server and vice versa but what I need is the server should route that message which I send through one client to another host(client) .
How can I do that ?
Please give me some ideas how to do that .
Thanks in advance
Edited by: m.parthiban on Mar 5, 2008 1:20 PM

ejp, thanks for your reply . can you please explain me bit more by providing code snippet ?
This is what I have done till now :
MyServer:
package connection;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import java.net.ServerSocket;
import java.net.Socket;
public class MyServer {
      * @param args
     public static void main(String[] args) {
          String ss ="",temp ="";
          Socket clientLink=null;
          try {
                    ServerSocket sockServer = new ServerSocket(6000);
                    while(true) {
                         clientLink = sockServer.accept();
                         System.out.println("Connection Established");
                         InputStreamReader isr = new InputStreamReader(clientLink.getInputStream());
                         BufferedReader bufReader = new BufferedReader(isr);
//                         System.out.println("buf "+bufReader.readLine());
                         try {
                              while ((temp=bufReader.readLine())!=null) {
                                   ss+=temp;
                                   System.out.println("ss   "+ss+"Temp "+temp );
                              System.out.println("Client > "+ss);
                         } catch (IOException e) {
                              System.out.println("while reading");
                              e.printStackTrace();
                         OutputStreamWriter osw = new OutputStreamWriter(clientLink.getOutputStream());
                         PrintWriter pw = new PrintWriter(osw,true);
                         pw.write("Welcome -by Server !!!");
                         pw.flush();
                         clientLink.shutdownOutput();
                         clientLink.close();
          } catch (IOException e) {
               System.out.println("Can't able to connect");
               e.printStackTrace();
}MyClient:
package connection;
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.io.PrintWriter;
import java.net.Socket;
import javax.swing.JOptionPane;
public class MyClient {
      * @param args
     public static void main(String[] args) {
          try {
               String serverMsg="",temp="";
               Socket client = new Socket("127.0.0.1",6000);
               PrintWriter pw = new PrintWriter(client.getOutputStream(),true);
               pw.write("Hi ,Accecpt me");
               pw.flush();
//               pw.close();
               client.shutdownOutput();
               InputStreamReader isr = new InputStreamReader(client.getInputStream());
               BufferedReader bufRead = new BufferedReader(isr);
               while ((temp=bufRead.readLine())!=null) {
                    serverMsg +=temp;
               System.out.println("Server > "+serverMsg);
               JOptionPane.showMessageDialog(null, serverMsg);
               client.shutdownInput();
               client.close();
          } catch (IOException e) {
               System.out.println("Failed to connect");
               e.printStackTrace();
}Once again thanks for the time you spend to reply me.

How to send JMS Message from a BPM Process

Hi All
I have small query regarding sending JMS Message from a bpm process. Is it possible to send JMS message from one bpm process to another bpm process.
I have a scenario in which I need to send a JMS message to a queue where another process is listening on that queue and as soon as the message is received on the queue the process instance is created.
I know how to listen for the JMS message on the queue, but I don't how to send a JMS message from a process.
Also Can I create process by sending the Notification to the process instead of a JMS message. But the process to be created is not a subprocess i.e. Can notification be send accross different processes.
Any information or example in this regard would be helpful.
Thanks in advance
Edited by: user9945154 on Apr 22, 2009 7:46 PM

Hi,
Here's one approach to sending JMS messages from an Oracle BPM process. If you're doing this just to send a message into another process, do not take this approach. It's far easier and quicker if you do this using the OOTB "send notification" logic.
These steps describe how to do this using WebLogic. The steps would be different if you're using another ap server / JMS provider.
1. Guessing you've already done this, but first expose the two required WebLogic jar files for JMS messaging as Java components in the External Resources. The two files for WebLogic are weblogic.jar and wljmsclient.jar” (located in the < WebLogic home directory > /weblogic/server/lib” directory).
AquaLogic BPM JMS Queue Listener for WebLogic 8.1
2. You've probably already done this, but add an External Resource to represent the J2EE container:
• Name: “weblogicJ2EE” - this is important and will be used in the next step
• Supported Type: “GENERIC_J2EE”
• Initial Context Factory: “weblogic.jndi.WLInitialContextFactory”
• URL: “t3://localhost:7001”
• Principal: and Credentials: whatever userid and password you defined to access theWebLogic administrative console.
3. Create the External Resource that represents the send queue configuration. In this example, I'm calling it “WebLogic Send Queue”. This is important - remember what you named it because you will use this name in the logic that sends the JMS message. This new External Resource is configured as:
• J2EE: “weblogicJ2EE” (same name as the second External Resource you created)
• Destination Type: “QUEUE”
• Lookup Name: “weblogic.examples.jms.exampleQueue”
• Connection Factory Lookup Name: “weblogic.examples.jms.QueueConnectionFactory”
4. Here's the logic to send a Message to the Queue
<pre class="jive-pre">msg as String = "Hello World"
jmsMsg as Fuego.Msg.JmsMessage
msg = "<?xml version=\"1.0\"?><Msg>" + msg + "</Msg></xml>"
jmsMsg = JmsMessage(type : JmsMessageType.TEXT)
jmsMsg.textValue = msg
sendMessage DynamicJMS
using configuration = "WebLogic Send Queue",
message = jmsMsg</pre>
Note that the “sendMessage” method uses the configuration parameter “WebLogic Send Queue”. You previously created a JMS messaging service External Resource with this name in the third step.
Again, please don't go this route if you're just using it to send notifications between processes,
Dan

Send a message from a list of emails in lightswitch 2013.4 HTML screen using ajax

Hi There,
any idea how to make a button to send a message from a list of emails in lightswitch 2013.4 HTML.
my idea is to send message to all emails in the details picker (or the drop down menu or a choice list) tat is filled by SQL query (as a data source in lightswitch)
i have read many articles, most of them were written in PHP or VB !
for example:
http://www.devarticles.com/c/a/HTML/Sending-email-with-AJAX-building-a-small-application/1/
http://stackoverflow.com/questions/22442074/how-to-send-email-to-a-list-of-addresses-from-lightswitch
http://lightswitchhelpwebsite.com/Forum/tabid/63/aft/75/Default.aspx
http://maxslabyak.com/c-sharp/using-jquery-to-send-email-with-web-services/
http://www.paulspatterson.com/microsoft-lightswitch-sending-emails-from-the-client/
http://www.quercussolutions.com/blog/index.php/microsoft-lightswitch-sending-emails/
http://www.lightswitchspecial.com/2013/01/7-most-easiest-way-to-send-email-from.html
as far as i know, the HTML screens in lightswitch 2013 can be encoded with ajax only, not vb or C# any more!
my project contains only HTML screens, no desktop screens. i know that i can do the VB programming in the tables actions, but i am looking to have this code in the Browse screen to give me more flexibility depending on my decision to
send or not..
help please :)

Hello Hasan,
I do this using a generic handler(e.g. sendmail.ashx). In the ashx file i use this code:
Imports System.Net.Mail
Imports System.Web
Imports System.Web.Services
Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
Dim str As String = "there was no error "
Dim Recipient As String = Convert.ToString(context.Request.Params("pRecipient"))
Dim strsub As String = Convert.ToString(context.Request.Params("pSubject"))
Dim strmsg As String = Convert.ToString(context.Request.Params("pMessage"))
Dim msg As New MailMessage
Try
' Your mail address and display name.
' This what will appear on the From field.
' If you used another credentials to access
' the SMTP server, the mail message would be
' sent from the mail specified in the From
' field on behalf of the real sender.
msg.From = New MailAddress("[email protected]", "Displayname")
' To addresses
msg.To.Add("[email protected]")
'msg.To.Add(New MailAddress("[email protected]", "Friend B"))
' You can specify CC and BCC addresses also
' Set to high priority
msg.Priority = MailPriority.High
msg.Subject = strsub
' You can specify a plain text or HTML contents
msg.IsBodyHtml = True
msg.Body = strmsg
'msg.Body = _
' "Hello everybody, " & _
' "I found an interesting site called <a href=""http:'JustLikeAMagic.WordPress.com"">" & _
' "Just Like a Magic</a>. Be sure to visit it soon."
' In order for the mail client to interpret message
' body correctly, we mark the body as HTML
' because we set the body to HTML contents.
' Attaching some data
' msg.Attachments.Add(New Attachment("D:\Site.lnk"))
' Connecting to the server and configuring it
Dim client As New SmtpClient()
client.Host = "mail.gmx.com"
client.Port = 25
client.EnableSsl = True
' The server requires user's credentials
' not the default credentials
client.UseDefaultCredentials = False
' Provide your credentials
client.Credentials = New System.Net.NetworkCredential("yourcredentias", "f2f081639ad")
client.DeliveryMethod = SmtpDeliveryMethod.Network
' Use SendAsync to send the message asynchronously
client.Send(msg)
Catch ex As Exception
str = ex.Message
Finally
msg.Dispose()
End Try
context.Response.ContentType = "text/plain"
context.Response.Write(str)
End Sub
When you create the ASHX then replace the ProcessRequest with the above function.
In LS HTML Screen create the function for pressing a button an appen the following text:
$.ajax({
type: 'post',
data: {
pRecipient: Screen.yourdata,
pSubject: Screen.yourdata,
pMessage: Screen.yourdata,
url: '../sendmail.ashx',
success: function success(result) {
alert(result);
This is a way you can do that. In VB and out of your browse Screen.
Hope this helps
Thomas

Send short message from Java application on mobile phone to server; http

Hello!
My question is: can I send short message from Java application on mobile phone to server - with the use of SMS (WMA) or http connection?
I found this topic http://forums.sun.com/thread.jspa?threadID=5405431 about: "how to send data from midlet to servlet using doPost method".
There is also such topic http://forums.sun.com/thread.jspa?threadID=5408046&tstart=0 about: "CLDC and MIDP - sending SMS to server -> Wireless Messaging API (WMA)".
Please, kindly help me.
Code from the topic mentioned above, edited by me so that it can be read easily:
//http://forums.sun.com/thread.jspa?threadID=5405431
//CLDC and MIDP - Re: how to send data from midlet to servlet using doPost method
I want to know how to pass the values .
for examples : this is what i wrote for doGet
String url = setting.getUrl().toString()"/testProServlet/servlet/UpdateCompanyProfile?userId="+loggedInUserId"&svComp="saveCompHex;
userId and svComp has the data which is very long so i wanted to use doPost.
Now i dont know how to do it.
This is what i have done in doGet (midlet)
public void saveCompanyProfile(String saveComp,int flag,String blankFieldNm)
     System.out.println("flag===" flag);
     if (flag==1)
          displayAlert("Company Profile Edit",blankFieldNm+" field cannot be blank.",AlertType.ERROR, edCmpRecForm, true);
     else
          String saveCompHex = helper.encodeHexString(saveComp);
          // String saveCompHex =saveComp;
          HttpConnection httpConn = null;
          serverSettings setting = new serverSettings();
          System.out.println("saveCompHex===" saveCompHex);
          String url = setting.getUrl().toString()"/testProServlet/servlet/UpdateCompanyProfile?userId="loggedInUserId"&svComp="saveCompHex;
          System.out.println("url of save company profile:: "+url);
          InputStream is = null;
          OutputStream os = null;
          try {
               // Open an HTTP Connection object
               httpConn = (HttpConnection) Connector.open(url);
               System.out.println("urlMidlet1 save edited company data===::" url.length());
               // Setup HTTP Request
               httpConn.setRequestMethod(HttpConnection.POST);
               httpConn.setRequestProperty("User-Agent","Profile/MIDP-1.0 Confirguration/CLDC-1.0");
               System.out.println("urlMidlet2===" url);
               int respCode = httpConn.getResponseCode();
               System.out.println("respCode edit company profile=====" respCode);
               if (respCode == httpConn.HTTP_OK)
                    StringBuffer sb = new StringBuffer();
                    os = httpConn.openOutputStream();
                    is = httpConn.openDataInputStream();
                    int chr;
                    while ((chr = is.read()) != -1)
                         sb.append((char) chr);
                    String sResultSvCompanyProfile= sb.toString();
                    System.out.println("+++++++++++++Company sResult+++++++++++++==="sResultSvCompanyProfile);
                    if (resultViewCompanyProfile.trim().equals(""))
                         System.out.println("++++++++++++++If++++++++++++++SaveCompanyProfile===");
                         displayAlert("Login Incorrect","Username and Password incorrect", AlertType.ERROR, mainForm, true);
                    else
                         System.out.println("++++++++++++++Else++++++++++++++SaveCompanyProfile===");
                         //companyProfile();
                         displayAlert1("Information","Company Profile edited successfully", AlertType.INFO, profileMenuScreen, true);
               else
                    System.out.println("Error in opening HTTP Connection. Error#" respCode);
                    //the line below divided into two lines because it was too long
                    displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                    AlertType.ERROR, mainForm, false);
          catch(IOException e)
               e.getMessage();
          finally {
               if(is!= null)
                    try
                         is.close();
                    catch (IOException e)
                         // TODO Auto-generated catch block
                         e.printStackTrace();
                         displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                         AlertType.ERROR, mainForm, false);
               if(os != null)
                    try
                         os.close();
                    catch (IOException e)
                         // TODO Auto-generated catch block
                         e.printStackTrace();
                         displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                         AlertType.ERROR, mainForm, false);
               if(httpConn != null)
                    try
                         httpConn.close();
                    catch (IOException e)
                         // TODO Auto-generated catch block
                         e.printStackTrace();
                         displayAlert("Connection Failed","Cannot connect to server, please contact the Administrator.",
                         AlertType.ERROR, mainForm, false);
          } //end finally
     } //end else (?)
} //end savecompany

hi,
SMS API(WMA) is an optional package. It is not a MIDP1.0 or MIDP2.0 api's.
There are phones which has WMA api with MIDP1.0 support .... Nokia 3650
Seimens has some phone with their own api's to send sms.Check out seimens site for more info
BTW, What do you mean buy sending SMS to Server????
If you want to send message to server you can do it with Http.
HTH
phani

Sending 2 messages from SAP but get 1 message in PI

Hi all,
This is a bit of a strange one but I have the situation where we send two idocs at the same time from a SAP ECC system to PI. The first idoc is processed but the second one just dissapears. Things I have checked:
SMQ1/SMQ2 on both systems - nothing there
Runtime workbench - the successful one is there but no failed messages
Sending two messages from another ECC system - we do get both messages - but this is a different interface (however the one with the problem is just a copy of the one which works)
Any ideas what this could be or what else I should be checking?
Kind regards
Ben

Hi Mark,
Thanks for your quick reply. I have checked idx5 and there is only one message/TID from the sending system.
The other ECC system is owned by a different department so I will ask them to run SM58 to see if anything is stuck in there as well

Sending jms message from bc4j session bean

Hi,
i need to send some message from my bc4j (deployed as session bean).
i have successfully deployed my mdb to listen for these message via Queue. I try to send some message from test client it works well, this the code snippet :
String connectionFactoryName = "java:comp/env/jms/QueueConnectionFactory";
String queueName = "java:comp/env/jms/demoQueue";
JMSSender sender = new JMSSender(connectionFactoryName,queueName);
sender.send("test");
sender.close();
when i move this code to my bc4j(session bean), message is sent, but my mdb doesn't receive it !( onMessage procedure doesn't come out )
Really appreciate for help,
Ricky H.P.

sorry, this is JMSSender class source code:
public class JMSSender{
Context jndiContext;
QueueConnectionFactory connectionFactory;
QueueConnection connection;
QueueSession session;
TextMessage message;
QueueSender queueSender;
Queue queue;
public JMSSender(String connectionFactoryName,String queueName){
init(connectionFactoryName,queueName);
void init(String connectionFactoryName,String queueName){
* Create a JNDI InitialContext object.
try {
jndiContext = new InitialContext();
} catch (NamingException e) {
e.printStackTrace();
* Look up connection factory and queue. If either does
* not exist, exit.
try {
//connectionFactory = (QueueConnectionFactory)jndiContext.lookup("java:comp/env/jms/QueueConnectionFactory");
//queue = (Queue)jndiContext.lookup("java:comp/env/jms/demoQueue");
connectionFactory = (QueueConnectionFactory)jndiContext.lookup(connectionFactoryName);
queue = (Queue)jndiContext.lookup(queueName);
}catch (Exception e) {
e.printStackTrace();
public void send(String strMessage){
try {
connection = connectionFactory.createQueueConnection();
session = connection.createQueueSession(false,Session.AUTO_ACKNOWLEDGE);
String correlationId = Long.toString(System.currentTimeMillis());
message = session.createTextMessage();
message.setText(strMessage);
queueSender = session.createSender(queue);
queueSender.send(message);
} catch (Exception ex) {
ex.printStackTrace();
} finally {
System.out.println("message sent success !!!");
public void close(){
try {
queueSender.close();
session.close();
connection.close();
} catch (Exception ex) {
ex.printStackTrace();
} finally {
public static void main(String args[]){
new JMSSender("java:comp/env/jms/QueueConnectionFactory","java:comp/env/jms/trgBctQueue");
}

Unable to raise Message from Sattelite System to support Desk

Hi Experts,
I am facing issue when i try to raise the message from sattelite system to support desk in solution manager 7.0.For this Below Checks i ahve already performed please suggest i am missing something.
1.RFC in Back Format.
2.addtional RFC authorization to RFC user in solmon system.
3.Sattelite systems entry Maintained in solmon in SMSY and loical clients.
4. No Range Maintained for both internal as well as external.
5.Support Pack level looks fine
Thanks in Advance
Suveer

I have come across this issue. The system was giving the same error message as you got.(error 513 ). But actual problem turned out to be authorization..!!(took some time for debugging that)
Look at the user which <solman>_back RFC uses when logging in from satellite system. Now login to Solution manager and check the authorization of that user. Does it have the following roles assigned..
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
If NO, generate these roles (if not done) and assign them to this user.
Do let me know if it helps...
Regards,
Anish

How do i send sms messages from my mac to a phone

the gurl from apple said i could send sms messages from my imac to a phone. How do i di that?

Hi Lanny,
Actually those two pics don't tell you what you need to know.
The First is correct as it can be from the Messages app but the second goes to no way to tell you how to do and b fact does not even mention SMS messages.
@ 10411
You will need to have an AIM or AIM Valid name that you can add to the Messages > Preferences > Accounts at the + icon below the list.
Next the Mac need to be in the United States.
Go to System Preferences > Language and Text and set the Region to the Untied States.
(In iChat this added SMS items to some of the Menus in iChat)
The iPhone has to be on a Carrier that is in the United States See list
Which in turn means the phone number is a United States one (+1 country code)
This means you add the Cell/mobile number as if it were a Buddy to an AIM list.
So Creating an Address Card for "SMS Test" and adding the mock number +1234567890 to that I get this in Messages (Mousing over the Name to see the "Screen Name" which is the number in this case)
Basically this is a feature that iChat has always had since AIM included a link to SMS to certain Phones.
Messages does everything iChat did/does and this includes SMS Messaging via an AIM Buddy list even though in this case the Menu items has disappeared.
AS has been said there are also other methods.
8:24 PM Saturday; April 6, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Regarding text messaging, if I send a message from my iPhone, the reply goes to my ipad, or mini ipad. How can I fix this?

Regarding text messaging, if I send a message from my iPhone, the reply goes to my ipad, or mini ipad. How can I stop this from happening?

Go to Settings/ Messaging/ Send & Receive on each device to set the contact points to be reached at, and to set the "from" address when you start a new message. It sounds like your iPhone might be sending messages out as one thing (e.g. an iCloud address) but set to not receive replies only to your phone number. Make sure you review settings on each device since you may, or may not, want to have them common.

How can I send a message from database to a J2EE application?

How can I send a message from database to a J2EE application?
If I have a codetable in database that has new or modified values I have to refresh the codetable in my J2EE application.
Most effective way would be send a message to initiate a table reload from J2EE app, but I don't know how to do this.
Now I have a background thread that regular reads the table and looks for changes.

http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

Service Desk - Create Message from Satellite System

Hi Guru,
I'm learning SAP Solution manager service desk tools (on EHP1 SP22). I've managed to activate it and I can create the message from satellite system (with SLFN as default transaction type). Is it possible to change default of transaction type while creating support message from satellite system (e.g. using ZSLF, etc)?
Appreciate for your input.
Thanks and Regards,
Yan

Yes. It is very much possible.
Use transaction - SPPFCADM
select the row - DNO_NOTIF
click on - Define action profile and action
Select the action profile - SLFN0001_STANDARD_DNO
Select the action - SLFN0001_STANDARD_DNO_CRM
in processessing type, change the container value to ZSFN.
Hope this will be helpful.
Regards
K.Kumar

Roles required to create support message from satellite system

Hi Team,
I am trying to create support message from satellite system. i have assigned S_RFC and S_RFCACL to the Zrole. Apart from that, is there any other roles to be assined in satelite system to create support message?
Regards
Kumar

I think that's it.
Of course they roles in the central system too: SAP_SV_FDB_NOTIF_BC_ADMIN and SAP_SUPPDESK_CREATE (or copies thereof).
Regards,
Sean

Sending HL7 Message from ISH system to External System

Similar Messages

Maybe you are looking for