Sending in Progress

We are using iplanet MS 5.2 under solaris 8. Every thing was working OK, suddenly no user can send any mail and on Web-client getting Message "Sending in Progress". SMTP is OK (checked thru telnet from client as well as sitting on Server connecting mx1.mail.yahoo.com 25). There was some problem in File System- made ok by fsck. Any help?

It is likely that something was broken by the filesystem problem. FSCK will not fix a database or other problem with a file that's been compromised.
things I would need to help you:
1. Actual version of iMS 5.2 Please run
imsimta version
and report the results.
2. Configuration. DId you configure Direct LDAP, per the documentation, or are you running Dirsync? If you're running Dirsync, you should not be. Your symptoms do rather look like a hung dirsync.
3. You say SMTP is ok, but how far did you check it? Have you actually sent a message out?

Similar Messages

Outlook hangs up on Send/Received Progress while sync with iTunes.

My Microsoft Office 2007 Outlook gets hung up on "Send/Receive" Progress (Status 75%) while syncing with iTunes.
I am syncing my iPhone 3Gs with iOS 4.3.3 with my computer.
What is causing this?
Thank you.

I ended up setting the iPhone back to factory settings and then setting it up as a new iPhone rather than trying to use things from my first generation iPhone in iTunes to set up the iPhone 4s. That worked, but the language was Finnish (I think) and it took a while to find the settings by "guessing" what the menu buttons read.

Send/Receive progress bar is not shown in Outlook 2010

Hi friends,
when ever i press send and receive option or F9, am not getting the send and receive progress bar in the bottom of the corner side. kindly help me

Hi,
If you click the "Update Folder" button, will the Send/receive status bar appear?
Please browse to: %userprofile%\AppData\Roaming\Microsoft\Outlook, rename the .srs file to ".old", then start Outlook again to check if the problem persists. The .srs file stores the send/receive
settings and a new copy of it resets the send/receive settings, check if then the problem is gone.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

E-mail sending with progress bar

OK so I have a application that allows the user to send an e-mail with multiple attachments. It works fine but I want to add a progress bar - when the user clicks SEND, a new window should pop-up with a progress bar and a OK button after the mail has been successfuly sent.
Any ideas how to accomplish this?
Mail sending is handled by this class and is called from a frame:
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.FileDataSource;
import javax.activation.DataHandler;
import java.util.Properties;
import java.util.Calendar;
import java.util.Date;
import java.util.Vector;
import java.io.File;
import java.io.*;
public class Mailer implements Runnable {
boolean success = false;
String sendToAddress, ccAddress, sendFromAddress,
subject, messageText, filename, smtpServer;
mainFrame2 frame;
public Mailer(String sendToAddress, String ccAddress, String sendFromAddress, String subject, String messageText, String filename,
String smtpServer, mainFrame2 frame)
this.sendToAddress = sendToAddress;
this.ccAddress = ccAddress ;
this.sendFromAddress = sendFromAddress;
this.subject = subject;
this.messageText = messageText ;
this.filename = filename;
this.smtpServer = smtpServer ;
this.frame = frame;
public void run() {
sendMail();
public void sendMail() {
Properties props = System.getProperties();
props.put("mail.smtp.host", smtpServer);
Session session = Session.getInstance(props, null);
MimeMessage msg = new MimeMessage(session);
Multipart mp = new MimeMultipart();
BodyPart body = new MimeBodyPart();
BodyPart attachment = new MimeBodyPart();
try {
msg.setFrom(new InternetAddress(sendFromAddress));
msg.setRecipient(javax.mail.Message.RecipientType.TO,
new InternetAddress(sendToAddress));
if(ccAddress.length()>3)
msg.setRecipient(javax.mail.Message.RecipientType.CC, new InternetAddress(ccAddress));
msg.setSubject(subject);
msg.setSentDate(new Date());
msg.addHeaderLine("MIME-Version: 1.0");
msg.addHeaderLine("Content-type: text/html; charset=\"windows-1251\"");
body.setText(messageText);
FileDataSource fds = new FileDataSource(new File(filename));
DataHandler dh = new DataHandler(fds);
attachment.setDataHandler(dh);
attachment.setFileName(filename.substring(filename.lastIndexOf("\\", filename.length())+1));
mp.addBodyPart(body);
mp.addBodyPart(attachment);
// this here is for the attachments, I've already collected them into a Vector
for(int i=0; i < frame.attachedFiles.files.size(); i++)
int chertichka = frame.attachedFiles.files.get(i).toString().lastIndexOf("\\");
String ime = frame.attachedFiles.files.get(i).toString().substring(chertichka+1);
BodyPart attachment1 = new MimeBodyPart();
FileDataSource fds1 = new FileDataSource(new File(frame.attachedFiles.files.get(i).toString()));
DataHandler dh1 = new DataHandler(fds1);
attachment1.setDataHandler(dh1);
attachment1.setFileName(ime);
mp.addBodyPart(attachment1);
turgData.doc_to_attach = "";
msg.setContent(mp);
Transport.send(msg);
} catch (MessagingException e) {
e.printStackTrace();
success = true;
public static boolean isEmailAddress(String text)
if(text.indexOf(" ")>-1) return false;
int kliomba = text.indexOf("@");
int dotCom = text.lastIndexOf(".");
if(kliomba < 2 || kliomba >(text.length()-4)) return false;
else if(dotCom > (text.length()-2)) return false;
else return true;
public boolean isSent()
return success;
Please provide some code on how to put a progress bar in a pop-up window after the user clicks SEND. Also, the send button should be disabled until the mail has been sent.
PLZ help me out ;)))

Hi,
Check the links for Email Adapter,If u want to send the Attachment then give me ur mail id i will send you one doc which will explain u how to send Email in Attachment.
Receiver Mail Adapter.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
eMail Reporting
/people/community.user/blog/2006/09/07/email-reporting
Regards,
Phani
Reward points if Helpful

Can Any One Send Calendar & Progress Bar sample Form fmb

Any one have calendar and progress bar form code pls send on
[email protected]

HI!
Unfortunately I not on work, I would send you the form.....
but:
Example of construction of a tree in manual
---(new_node parent, l_node children):
new_node := Ftree.Add_Tree_Node(htree, Ftree.ROOT_NODE, Ftree.PARENT_OFFSET,
Ftree.LAST_CHILD, Ftree.EXPANDED_NODE,
               c2.firm_name, NULL, c2.firm_name);
l_node :=Ftree.Add_Tree_Node('B.T', new_node, Ftree.PARENT_OFFSET,
               ftree.last_child, ftree.leaf_node, c4.MODEL,
               NULL, c4.MODEL);
next exemple:
In properties of a tree " query of data " we write query on which our tree (for example) is under construction :
SELECT -1
,LEVEL
,Comment
,NULL
,OBJECT_ID
FROM adm_object
CONNECT BY PRIOR object_id = object_object_id
START WITH object_object_id IS NULL
and then in trigger
WHEN-NEW-FORM-INSTANCE :
---it is important to not forget if your populate from tree:
Ftree.Set_Tree_Property(id_tree, Ftree.RECORD_GROUP, REC_GR);
v_ignore := Populate_Group(REC_GR);
Ftree.Populate_Tree(id_tree);
or use this procedure:
PROCEDURE pop_tree (NBT VARCHAR2, REC_GR VARCHAR2, p_val number) IS
v_ignore NUMBER;
find_node ftree.NODE;
ID_tree ITEM;
BEGIN
ID_tree := Find_Item(NBT);
Ftree.Set_Tree_Property(ID_tree, Ftree.RECORD_GROUP, REC_GR);
v_ignore := Populate_Group(REC_GR);
Ftree.Populate_Tree(ID_tree);
--find root
find_node := Ftree.Find_Tree_Node(ID_tree, p_val, Ftree.FIND_NEXT,
Ftree.NODE_value, Ftree.ROOT_NODE, Ftree.ROOT_NODE);
if find_node = 0 then
     find_node := 1;
end if;
Ftree.Set_tree_selection(ID_tree, find_node, Ftree.SELECT_ON);
end;

Maximum File Size? How can I stop a "Send" in progress?

What is the Maximum File size you can send?
(Can't find it indicated anywhere on the Adobe site. Just says "large" files. I hope Adobe's definition of Large matches my needs.)
Is there a way to stop the process of a "send" ?
I am in the middle of sending a large zipped file to an email address (around 6GB, note: apparently JPEG's don't actually get smaller when you compress them) and it's taking a long time. I'd like to stop this and send a smaller zipped file first, but the "Cancel" button did not stop the process. Anyone know?
Thank you

Hi mariehill,
[Mosaicriver, I believe I saw that your questions were answered by Bob on a separate thread; let me know if you need any further assistance.]
At the moment, the Adobe Send team is working hard to improve the service's functionality with very large files. Mariehill, how large is the file you're trying to send? You may also want to check your upload speed, as that could affect the success of the sending process. If you continue to have trouble, we recommend trying the following:
1. First, try uploading the file you'd like to share to your Acrobat.com file storage, and then sharing the file from there. Let me know if you need more detailed info on how to do that.
2. If you've got a subscription to Adobe Send, you can also use the old SendNow service for the time being; the two products will coexist for a while longer until SendNow is retired later this year.
We apologize for any inconvenience; we'll post to this forum when we have updates from the team about changes and improvements to the Adobe Send service. Let me know if there's anything else I can help you with!
Best,
Rebecca

How to monitor a writeObject() to send its progress to a JProgressBar

The thing is I have to write an object to a stream, but the size of the object can go up to 5 mb so I would like to give some feedback to the user.
I have a JProgressBar but don't know how to figure out the progress made by the writeObject() method. I don't know if this is possible...

hello,
I have never thought of this before, but the obvious simple solution is a costum FilterOutputStream that counts the data. Construct the ObjectOutputStream on this filter stream.
acid

Can't send or download messages after 31.4.0 update

Auto-update to 31.4.0 on/about Jan 14, 2015 has caused my install to fail sending and receiving messages. Initial program load and subsequent Get Messages requests go nowhere: The progress display in the page footer shows "[acct name]: Connecting to [host name]..." and nothing else happens. When attempting to send a new message, the Sending Message progress box appears, followed by the Send Message Error box containing the warning "Sending of message failed. The message could not be sent because connecting to SMTP server [smtp host] failed. etc."
No changes to my Thunderbird configuration have been made prior to or since the auto-upgrade. When the upgrade occurred I noticed a momentary balloon message in the lower right corner of my display which vanished before I could read it.
I have tried deleting the signon password for the mail server, but on re-try Thunderbird does not ask for a new password. It is going south sooner than that.
Examination of the Error Console shows that, after a series of ordinary start-up entries, two final entries look fishy: (1) "mutating the [[Prototype]] of an object will cause your code to run very slowly; instead create the object... etc." followed by (2) "Could not read chrome manifest 'file:///C:/Program%20(x86)/Mozilla%20Thunderbird/chrome.manifest'." The latter file is indeed absent.
Note: My system is configured to read its profile info from portable drive X:\ instead of the C:\ drive.
I have accessed my mail server via webmail and there are indeed incoming files available to download.

I'm having the same problem as you with really similar symptoms. I'm linking my post here for reference in case it helps. [https://support.mozilla.org/en-US/questions/1041448 Receiving emails doesn't attempt to log in. No errors output.]

Can't send large emails with dial-up

I have a new iMac. The new ones do not have an internal modem so I am using a USB Apple modem to connect to my ISP. When trying to send a large email, either a lot of text or with an attachment, the send stalls and will not complete. I can not send a 500KB file as I could on my Windows machine. If I zip the 500KB down to 30KB it works just fine. The sending blue progress bar extends about 3/8inch and just stalls there. Finally times out and I get an error.
Any help is appreciated.
Thanks
Rich

It's probably an issue with your ISP--you should contact them first. Also, it could be an issue with your email provider--maybe they have size limits on emails. But if you are connected to the internet, and everything else is working as it should, it's probably not the iMac.

Trouble sending email since iCloud was introduced

when i try to reply to an email, and i add a small attachment (pdf) it never completes sending. the progress bar just hangs at about 1/3 completed. i am still using my .mac mail account and i am wondering if this has anything to do with my problem. i have mountain lion os.

Did you migrate your MobileMe account to iCloud before 1 August?
If you did, you can sign into it in System Preferences (or Settings)>iCloud - Lion 10.7.2. or iOS5 minimum required. Then enable Mail in the checklist there.
If you didn't, the contents of your account have been deleted and are not recoverable by any means. You can reactivate the address - though not its previous contents - by signing in as above.

Can't send mail while send/receive process is ongoing

I'm Using Microsoft office 2013 std.
Problem with my outlook 2013, Can't Send an email while the outlook is downloading the emails(send/recieve process is on going) and just stuck to my to my outbox.
Appreciate for help regarding this issue.
thanks..

Hi,
Was the email been delivered after the send/receive progress finished? Based on my testing, seems it's the default behavior of Outlook email to stay in Outbox when the send/recieve process is on going.
If the email still stuck in Outbox after the send/receive progress is finished, you can treat this issue as the "email stuck in Outbox" issue and troubleshoot it according to the steps below:
http://support.microsoft.com/kb/2663435
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Outlook not sending or receiving any emails

I start my outlook and everything seems to be working fine for some time. Then all of a sudden the Outlook icon in the notification area shows a loading symbol and a message saying "Requesting data from the server". When I check for the
send/receive progress it seems to be still with no errors. Also the synchronisation status at the bottom of the Outlook windows reads "All folders up to date, Connected to Microsoft Exchange"
When this situation occurs, new emails are neither received nor sent; unless I restart the outlook application. I currently have 4 email accounts setup in the Outlook (2 Microsoft Exchange accounts and 2 Gmail accounts). I see this issue with only
the exchange email accounts.
I have been facing this issue for almost a month now and also I am not able to find the exact issue in any of the forums. Can someone please help me with this issue!!

Hi,
If the 4 email accounts use one profile, I suggest creating them in separate for testing.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Fax from computer to photosmart 7525 gets cancelled after spooling

I can fax directly from printer, but when I use the HP software or print function on the computer to set up fax and send, the progress goes from spooling to cancelled without any error notices. I have a Dell XPS 8500 running 8.1 and Photosmart 7525 connected by USB and wirelessly. They communicate just fine with the scan and print functions. Both are current on updates using the check for updates utility. I have a dedicated Voip phone line from Comcast and ther most current modem that I have slowed through the fax settings. I've spent hours reading forums on HP and Microsoft searching for exactly this issue. Please help

Hi @xskilledtrades
The truth is, I don't know what is causing the fax from computer function to fail. I understand from your description that the fax is cancelling after spooling, but that you can print and scan just fine as well as fax directly from the printer. I suspect the issue has something to do with the driver, thus I suggest we remove the driver and reload it.
Please use the following steps to delete the printer/fax from device and printers, and the driver from the server properties.
1. In the ‘Devices and Printers’ folder
2. Choose ‘Print server properties’.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only'
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
The Setup and software screen will open and you can click on Connect a new printer.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Error while generating Work Order

I have a problem while generating Work orders in SNC.
I set the configuration as belows.
<General setting for Work Order generation>
1.Granularity -> Work Order per Purchase Order Item
2.Create WOs with Report -> Check
3.Publish Work Order Upon Creation and PO change -> check
4.Send Work Order Information -> Upon Agreement and when a Phase Is Completed
5.Send Production Progress Notification -> When a Phase Is Completed
<Phase Structure>
1.Comp. from SC Order -> Use SC Comp. as Input, Product and Co-Products as Output
<Master Data Assignment>
1.MD Used for WO -> Phase Structure
2.Active -> Check
When I use the program /SCA/WO_CREATE for generate Work Orders, Run time error occurs with below messages.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Except.                CX_SY_REF_IS_INITIAL
<Error analysis>
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in
procedure "GET_PIO_LCTYPE" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LS_NODEREF-R_NODE").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
<Missing RAISING Clause in Interface>
Program                                 /SCA/CL_WO_PHASE==============CP
Include                                 /SCA/CL_WO_PHASE==============CM00V
Row                                     1
Module type                             (METHOD)
Module Name                             GET_PIO_LCTYPE
<Trigger Location of Exception>
Program                                 /SCA/CL_WO_PHASE==============CP
Include                                 /SCA/CL_WO_PHASE==============CM00V
Row                                     45
Module type                             (METHOD)
Module Name                             GET_PIO_LCTYPE
Please let me know what I have to do for this error.
Thanks and Regards
JT

Hi JT
Clearly the problem is with the method GET_PIO_LCTYPE of interface /SCA/CL_WO_PHASE
Check whether note 1363834 should be implemented
It could be because of some corrupted WO entries in database
or some customizing entry it is expecting
suggest you to debug the method and try to check what it is expecting
Best Regards
Vinod

Sending in Progress

Similar Messages

Maybe you are looking for