Sending Notification to Multiple Users in Multiple Language.

Hi,
In our Apps (R12) environment, workflow is installed in multiple languages. I have a requirement where User can choosed their preferred email language and all notification should be sent to that user only in the preferred language.
Below is the logic that I am using:
1) Creating adhoc users for the email addresses and passing user preferred language as 'language' parameter. This language is different for different users.
2) creating adhoc role and attaching all previosuly created adhoc users to this role.
Here is where problem comes...
Notification is going only in the language that is specified while creating adhoc role. This is overwriting languages that are being specified while creating adhoc users !! I even tried not to pass any language while creating role but in that case it is taking language for that session...
Is there any way to achieve this functionality?
Thanks,
Sumit

Hi,
Are you expanding the role in the definition?
I would expect that if you are notifying a role, then the language of the role is used, unless you expand the roles - in which case the language for the users which are part of the role would be used.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Similar Messages

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • Send notifications to the users whenever a template is ready or an approval

    Is it possible to send notifications to the users whenever a template is ready or an approval is recorded when we use the work status.  Is there any SAP "How to"  documentation available on this ?  What are the limitations of this process ?

    Hi Sumit
    Yes it is possible.
    In BPC Microsoft Version we can design Business Process Flow (BPF) with the required Start date and time.
    Through BPF (using step 1) we can also send E-mail Notifications for Start and closure of the Planning cycle.
    To make this E-mail notification thing work:
    1. Assign E-mail ids to the Owner/ Reviewer property in dimension with Hierarchy structure.
    2. Assign Server info in the Application Set Parameter section from BPC Admin domain.
    Using WorkStatus
    This initiates emails to both the planner and the approver for any change in data for a work state change.
    This is available in link: http://help.sap.com/saphelp_bpc70sp02/helpdata/en/a1/532226947C49A5B2E2BD32450CB2D1/frameset.htm
    Hope this answers your question.
    Regards
    Abhishek

  • Send notification to all users of specific responsibility in 11i

    Hi All,
    Is there anyway to send notification to all users of specific responsibility in 11i ?
    I have a setup form for hierarchy level (e.g level 1 - 5) by which each level will be notified either by responsibility or user?
    If its setup by responsibility, notification will be sent to all users under that responsibility.
    Do i have to create role using WF_DIRECTORY.CreateAdHocRole and add all users for specific responsibility to the role?
    Also if the responsibility setup changed, how to maintain the existing notification with the old resp.
    eg. level 1 is set to resp X then later on set to resp Y.
    Regards,
    Fendy

    Use 'Expand Roles' to achieve this. Please check the WF Developers Guide to see how it works.
    Yes, you may use wf_directory.createadhocrole for this purpose too.
    What do you mean when you say the responsibility has changed? It it is end-dated no notification should be sent to any of its members. It depends on the assignments of the role/user. if the assignment is used then the user will get it. If the assignment is end-dated then the user will not get the notification.
    You can always use wf_local_synch.Propagate_user_role to change the assignment of a user/role. If you want to end-date it, you can use it. Or you can add another user to the role, etc.
    Hope this helps,
    Alejandro

  • How to send notifications to different user groups based on payload value

    Hi Gurus,
    I have a scenario in BPM where i have to send notifications to different user groups based on the payload value.
    ex:
    Payload sample:
    <employees>
    <emp1>
    <state>TX</state>
    </emp1>
    <emp2>
    <state>AZ</state>
    </emp2>
    </employees>
    Requirement: I have to send notification through Humantask to users of TX and AZ as mentioned in payload.
    Can you please help me out in achieving this in BPM?
    Thanks,
    Raju
    Edited by: user0808 on Mar 1, 2013 12:58 PM
    Edited by: user080811 on Mar 4, 2013 11:06 AM
    Edited by: user080811 on Mar 4, 2013 11:07 AM

    Hi Daniel,
    thanks a lot for your quick response.
    I went through your blog and tried implementing the same.
    But in my case i have to send parallel notifications to both the states.
    Please correct me if i am wrong, using if conditions in rules is allowing me to send to only one state.
    I also tried the following approach
    1) setting the organization units in bpm workspace
    2) passing values using human task parametric roles
    3) and looping the subprocess that has the humantask for the count of states.
    I am able to loop the subprocess but i am not able to change the parametric role value for the next iteration of the subprocess.
    Can you please help me in resolving this?
    thanks,
    Raju

  • Is there way send notifications  to portal users within weblogic portal

    Is there way send notifications to portal users within weblogic portal or we need
    to use Message broker channel or JMS for this purpose

    venks wrote:
    Is there way send notifications to portal users within weblogic portal or we need
    to use Message broker channel or JMS for this purposeI think you could do it using the portal event framework....subscribe
    the user to a custom event on login and then just raise the
    event...should be examples in the samples app....check the javadocs for
    com.bea.p13n.events.Event
    Martin

  • Multiple users on multiple macs sharing iPhoto Library

    How can different family members (using personal logins) all access the same iPhoto library, regardless of which of our two iMacs they happen to be logged into?
    I thought the solution would be as simple as:
    Plug an external hard drive into the Airport Time Capsule.
    Copy our iPhoto library onto the external hard drive.
    Log in as each user, open iPhoto and point to the iPhoto library on the external hard drive.
    I've searched the support forums and can't find a successful example of this. Does it work? If not, is there another elegant solution?
    I'd also be interested in how to back up the 'networked' iPhoto library. I plan to use iPhoto's "publish to Flickr" capability for this as it also solves how to share photos with our family's many iOS devices.
    Ps. I'm new to the Mac environment so am still learning my way with OSX (be gentle please).
    Equipment
    x2 iMacs (<12 months old) running the latest OSX and iPhoto software versions
    2TB Airport Time Capsule (brand new) with a 1TB USB external hard drive plugged-in (not sure of the formatting).

    How can different family members (using personal logins) all access the same iPhoto library, regardless of which of our two iMacs they happen to be logged into?
    I thought the solution would be as simple as:
    Plug an external hard drive into the Airport Time Capsule.
    Copy our iPhoto library onto the external hard drive.
    Log in as each user, open iPhoto and point to the iPhoto library on the external hard drive.
    This cannot work, unfortunately, for several reasons:
    iPhoto is strictly a single user database. Only one user at a time can open it.
    An iPhoto library needs to be on a locally mounted volume. It cannot be on a network share.
    The file system of the drive needs to be MacOS Extended (Journaled).
    Apple's only recommendation to share an iPhoto library is this:    iPhoto: Sharing libraries among multiple users
    If you want to share photos and not the library, see this:   iCloud: iCloud Photo Sharing FAQ
    Trying to put the iPhoto or Aperture library on a network volume, will result in library corruption or data loss:
    Use locally mounted Mac OS X Extended volumes for your Aperture library

  • Multiple user accounts, multiple Ipods, One computer, One Itunes library

    Here's my problem, I have my main music library on my Mac Mini (Intel 1.5 solo) its too big to fit on the hard drive with everything else, so I added a Mini pal drive. This has my music, photos and all the other junk I cant fit on the mini's hard drive. I want to create multiple accounts so my kids can each have their own, but we all have Ipods that we want connected to our own accounts. I want to keep all the music in one library, and share it accross all the accounts. I dont want to have to log on when my kids want a song from my library. Itunes dosent seam to like the library being on the seperate drive. Mabe I am just dooing something wrong.
    Ps: I'm running Itunes 7.3 on all my machines

    Apple really doesn't quite do multi-user well yet, at least as far as the iPod goes (IMHO.)
    We've taken your approach. 3 users with iTunes for each pointing to a single library on an external storage device. That way there's no problem with having to go to other libraries to import (and not question about 'copying files'... big waste of space.)
    Our problem is having multiple iPods plugged into the same machine. I'm about to buy one of the new models for wife and daughter, but I'm not sure how we all can be plugged in (as I'm sure will happen.)
    Right now, when I plug in just my own Nano, it appears in iTunes for each of the other users. In fact I sometimes can't even eject because iTunes for another user thinks the iPod its attached to it.
    To expand this thread, anyone have pointers on use of multiple iPods on the same machine with multiple users? The existing links to Apple support articles are not relevant.

  • Add-MailboxPermission for multiple users on multiple mailboxes

    I have a need to grant a large number of users full access to an equally large number of mailboxes. I've previously been able to do this easily in the management shell where I have multiple users for one mailbox (or vice-versa; one user for multiple mailboxes)
    by using one of the following 2 commands:
    get-content c:\xxxx.txt | foreach { Add-MailboxPermission $_ -User user.name -AccessRights FullAccess}
    or
    get-content c:\xxxx.txt | foreach { Add-MailboxPermission examplemailbox -User $_ -AccessRights FullAccess}
    This works fine for when there are only multiple entries on one side of the equation, but using this method, I would need to run the command multiple times to get all of the accesses set up as requested. So I've been looking to see if there is a way of writing
    one command that could achieve it all in one go.
    What I've been looking at doing is creating a .csv file, filled as such;
    name,mail
    user.name1,mailbox1
    user.name2,mailbox2
    And then writing a shell command like the below:
    import-csv c:\xxxx.csv | foreach { Add-MailboxPermission $_.mail -User $_.name -AccessRights FullAccess}
    Will this achieve the result that I'm aiming for? or is it going to be easier to just go with the more time-consuming method of just having the multiple entries on one side of the equation?

    Hi,
    I have a test in my environment, you can use the following cmdlet to grant multiple users full access to multiple mailboxes.
    Import-csv c:\test1.csv | foreach { Add-MailboxPermission $_.mail -User $_.name -AccessRights FullAccess}
    For example, if I want to grant amy02, amy03 full access permission to amy01; grant amy01, amy02 full access permission to amy03, the test1.csv file should be:
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Sending Notification to a User (common box) without attaching an employee..

    Dear all,
    I expect all of yours help on this doubt.
    I have created custom notification using wf_notification.send based on my logic, now I want to send these notification to common inbox in the Oracle. For this purpose i have created a user and attached the responsibility which includes notification inbox. I don’t want to attach an employee to this common user id because more than 5 people will be accessing this account. Because not attaching an employee, notification are not going to this common box, is there any way to solve this problem. When I am sending this notification to a user where employee already attached, it is working fine.
    Regards,
    Jojo George

    Dear Jojo,
    Can you please provide the details and procedure to create custom notifications. I need to create for oracle self service HR. i need to send the notifications of certain actions like termination, absence etc for particular persons
    Thnak you,.

  • Best way to manage multiple users and multiple devices?

    I would like some advice on the best way to manage iTunes and devices synced to it for multiple users -- Here's the scenario: I have 2 grade-school aged kids, who each have an iPod Nano and are going to get my old iPhone 3G to use as an iTouch after I upgrade my phone to the iPhone 4. In addition to my iPhone, I have a MacBook, a 30GB iPod, and a iMac. We are also looking into buying an iPad that we'll want to use (among other things) to watch movies while traveling. All music/apps/movies are currently located in my iTunes account on the iMac, and we sync via my personal @mac.com account.
    I don't want to simply set up separate iTunes accounts for each kid, as I'd like to be able to control what music & apps they buy/download, and I've already got a fair amount of "their" music/apps/movies in my account, and don't want to have to try and move it from my account to theirs. Any advice on how to best set up an iTunes sharing arrangement that allows me to control their accounts, and sync all of the above devices would be most appreciated. Thanks in advance.

    turingtest2 wrote:
    Wow, I'd forgotten that one...
    as I said in the thread, that post did find it's way into my database
    great stuff, tt2 !

  • Using Messages with Multiple Users and Multiple Computers

    I have two users who share two different computers, switching between them during the day.
    I'd like to use messages on them for us to send text messages in the office, however, it asks them on logging in (most, but not everytime) to re-enter their apple id password.  It seems that using icloud for messages among multiple computers like this isn't good.  its like it wants each computers to be linked with a particular user, and doesn't like it that the users are moving around from computer to computer
    Options to avoid this nuisance?
    1.  Would bonjour messaging work, and then just remove the icloud account from messages?
    2.  How about setting up the message server on my ML Server, would that avoid this problem?

    I'd say probably make sure that in the advanced tab under edit>preferences you should make sure they both point to the same file.
    My turn now, how to i post a thread, there's no button.

  • How do you setup multiple users with multiple devices on itunes?

    I'm trying to find the easiest solution to our family music situation.  4 users, 4 devices (ipods, ipad, imac, pc laptops), and 4 different musical song interests.  I'm sure there are millions of households that have the same exact situation.  I want to be able to pull up only my musical library, not my kid's music, and then easily synch it to my ipod.  Everyone in the family wants to do this same thing.  I have spent alot of time trying to search the forums/internet and there does not seem to be one "most popular" solution.  I did setup iCloud for each family member using a different Apple ID than my main Apple ID, and I'm happy that ALL the music shows up on my ipad.  But between iCloud, MobileMe, Home Sharing it all gets very confusing.  Some say to setup multiple computer login accounts, and others say to setup 1 playlist for each family member and synch from that playlist.
    I would think 1 itunes account allows you to easily share a purchased song with 4 users, instead of buying songs twice.
    So here are a few of my questions-
    1-Is it best to have only 1 itunes account and then synch all devices off of 1 main computer? 
    2-Or since we each have iCloud accounts, will they be able to synch their ipods from their own pc laptop?
    3-And when they synch, what is the easiest way to exclude other users music in itunes? (other than unchecking hundreds of artists)
    4-Or setup 4 separate computer login accounts on the imac and then keep 1 itunes account?  If so, how does this work when they open itunes?
    Again, I'm hoping for a straightforward simple solution.  I don't want to move & create libraries, download 3rd party software, etc. etc.  Please reply if you found something that works for your family.  Thanks in advance.

    Richmaster wrote:
    turingtest, I do have a couple questions. 
    Number one, does everyone in your family only sych their ipods from only 1 computer?  If everyone only uses itunes from 1 computer I can see how that will work.  But what if kids want to use itunes for windows?  Will "Home Sharing" allow all their music purchased on the MAC, to be also displayed on their itunes for windows laptop?  I noticed you have PCs and also an ipad.  How do you manage your family's music on these devices?
    Also, how did you first get everyone's music library into their own library?  Drag & drop?  Is the "grouping field" you mentioned under "view", then "view options"?  What does this do? 
    Thanks.
    Sorry I missed your post earlier. Normally I follow up on any replies. This one must have fallen off the page on a busy day.
    As my kids have left home I have created for them a complete clone of the familiy library, then deleted the tracks from it they don't want. Over time their libraries will divirge, but if needs be they can still update their devices using the library at home. Handy when eldest's kit was stolen.
    Grouping is just another property, useful because it isn't generally overwritten by other software but is stored in the tags, so preserved when you copy files from one place to another. You can make the column visible and edit for multiple tracks in Get Info. Some software calls the same field "mood" or "sub-genre". iTunes has a specialist purpose for it generally used with classical music, but it doesn't seem to work very well for that and I don't use it that way.
    tt2

  • Multiple users and multiple select options

    Hi,
    First of all, let me congratulate Oracle HTML DB team for this great product! This is extremely powerful and useful.
    I have multiple selection item on the form to generate report for the selected multiple schools. I have two critical questions.
    1) Currently I am deleting all records from database tables for multiples selects and similarly selecting all records from these tables to populate dependent LOVs and so on. This is a major issue when multiple people use this application at the same time. I looked at couple of examples to create, delete and select records based on IDs (unique) and it is not clear to me if I need to create parameter/hidden params on the reports side or on the HTML DB side or .. how do they communicate etc. Could any one clarify this process of checking for unique IDs please.
    2) Is there any way to give an option to the user to treat multiple selected item as just one single and to treat them separate? For example, if we let the user count number of students at two schools, how can we let the user count two schools separate as well as both schools together? This should also further ask for the possible options separate for both schools separate if they were to run separate.
    This is very important for me and appreciate any help from you. Thanks in advance.

    Hi,
    Could any one point me in the right direction, please!
    Thanks,

  • Sending notifications to offline users when new emails arrive

    Hi,
    I need to develop and application that would send a notification via SMS to users whenever new mail arrives to their inboxes.
    One way to do that would be to periodically check each subscriber's account for new mail.
    Are there any other options?
    Thanks.
    Laith

    using IMAP folder can add a listener for notifying new mail arrival.

Maybe you are looking for