Sending signals with 6280

Greetings!
I wonder why I can't send signals to my friends with Nokia 6280? I can recive mp3, acc and other formats. When I try send I get this message on the display. "It's not possible to send chosen files"
I've been in contact with Halebop the company I use and they say they have no limit on sending tunes to other people. My question is now if the Nokia 6280 got restrictions on sending tunes with mms and how big this limit are?
Regards
User of Nokia 6500 Slide

1) bash uses the # character to start a comment, unlike Java's //, so you would need to change the // in the pidof line to #
2) if you set a variable in a bash script, you'll need to reference that variable with a $ to get its value. So the second line should be kill -2 $a
3) In most modern Linux distributions you can just use the "killall" command that combines these two steps for you, letting you simply Runtime.exec "killall -INT maude.linux", for instance.
Hope this helps!
James
James Manning | Principal Engineer
Porivo Technologies, Inc.
919.806.0566 | [email protected]
http://www.porivo.com/
Measuring end-to-end Web performance.
Register for a FREE Performance appraisal:
http://www.porivo.com/peerReview/eval.html

Similar Messages

Does the Ipod nano 6th gen capable of sending signal to headphones. Us older folks would like to use wireless headphones versus earphones with a wire.

Is the ipod nano 6th gen capable of sending signal to wireless headphones. I am 57 and do not like earphones and wire. Would like to get the nano. I understand the iphone 4 can use wireless headphones, but i can not wear it on my wrist like a watch. Thank you. techie mawmaw.

What is your price range. I know exactly what you are talking about. I always used headphones while mowing and I used to runt he cord through my shirt to prevent it from getting caught on the steering controls of the mower but one day the cord came untucked form my pants pocket ripping the cord straight out of the headphone itself. They were nice Sennheisers to!
I ended up replacing them with these http://en-us.sennheiser.com/wireless-bluetooth-headset-headphone-smart-mobile-phone-stereo-mm-500-x they are pricey at 330 but will last you many years if they are taken care of. Sennheisers are excellent quality. Best Buy oddly doesnt carry the 500 series they have the 450 and 550 but not the 500. Completely ignore the Beats by Dr. Dre they are horrible for the price point they are!
The noise cancellation is great and they are very comfortable. Like you I dont care for earbuds as I have tried many and they all hurt my ears and on-ear style would eventually start hurting my outer ear but these are very comfy!

How to send a ttl signal with a good exactitude less than 10ms?

i have a pci 6013 (8 input channel) and pci 6711 (4 outpout channel).Then i need to send a ttl signal to a camera ccd to take a photo when a waveform sinus is equal at zero (rising), but when i send this TTl signal with dasylab using generator pulse or combi trigger and readind this signal, i have difference between dasylab pulse(that is exactly) and measurement pulse that is approximate 40ms after.But i need to have less than 10ms is it possible?
Frequence rate =1000hz and block size=512 the waveform sinus is 0.2Hz.i have already try to increase the sampling rate but nothing happens.Thank for your help.

Yes, it's possible.
You just have to reduce your block size to 10 !
For more informations, visit Forum Dasylab en français at http://forum.aceboard.net/?login=128657
Frédéric Miqueau
MD Electronic, France
http://www.mdelectronic.fr
French Dasylab Forum : http://www.dasylab-forum.de/forum/index.php?showforum=43

Is it possible to send and recieve audio signal with AI / AO in NI-6229 which is DAQ board.

I'd like to test MP3 Player.
The procedure is below.
1. Send a audio signal of 1kHz from mp3 file in PC through AO in NI-6229.
2. Record it with MP3 player.
3. Play a recorded audio signal with MP3 player.
4. Recieve the signal through AI in NI-6229 and measure frequency and voltage of the signal.
5. Compare the signal with original signal.
Do you think it is possible?

Hello Blue Sky80,
It is possible to measure audio signals using LabVIEW and Sound an Vibration toolset. Please take a look at this Developer Zone article on Audio measurements using LabVIEW to get more information on this subject.I hope this helps!
Regards,
Ima
Applications Engineer
National Instruments
LabVIEW Introduction Course - Six Hours
Getting Started with NI-DAQmx

How do I set up LiveRig or TouchOSC with Mainstage 2.2.2? Both apps send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI?

As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
Thanx in advance.

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

How to get controls of a vi to send signals more than once

Hi,
Recently I designed a rather neat VI that allows the user to quickly switch wiring and ID number characteristics on a certain device. The inside of the VI is an orchestration of sequences and loops that allows user full control through one control loop that cycles through until the user selects a desired function, for which the loop terminates and performs the function. After the function is complete, if the user has not pressed "stop", another loop brings the program back to the control loop.
So the VI works great, but as someone who's been interested in automation, I want to try to take this to the next level.
My next attempt was to put the finished VI as a sub-VI in a new VI that is meant to automate the user control process on the front panel. I've attempted to use both a flat sequence and the state machine template to do this, and they work great for automatically pressing buttons when working with property nodes or local variable. The problem, I've found, is that I don't know how to send signals to the Sub-VI from the connected controls at a constant rate without throwing it into a loop itself, which doesn't work because, of course, the sub-vi runs on it's own set of loops and there will be no iteration increment until the program inside the sub-vi terminates.
Or, if the VI and it's inputs are left on it's own and I try to write values to the controls of the inputs, I can definitely change button positions, but, looking at the signal flows, no signal will be sent from the connected controls to the sub-vi.
A second problem is that, due to my use of a program button that latches when pressed, I'm having a tough time trying to manipulate it will local variables or property nodes. Because of the way it functions, the "value" property nodes shows up as purple and I'm not sure how to make it tap itself to operate how it did in the Sub-VI.
Thanks in advance,
Matt

TeknoAXE wrote:
...The inside of the VI is an orchestration of sequences and loops that allows user full control through one control loop that cycles through until the user selects a desired function, for which the loop terminates and performs the function. After the function is complete, if the user has not pressed "stop", another loop brings the program back to the control loop.
Well, a tight polling loop is typically not a good design. have you tried the event structure instead?
TeknoAXE wrote:
The problem, I've found, is that I don't know how to send signals to the Sub-VI from the connected controls at a constant rate without throwing it into a loop itself, which doesn't work because, of course, the sub-vi runs on it's own set of loops and there will be no iteration increment until the program inside the sub-vi terminates.
You can wire control references to the subVI and then poll the state of the controls on the toplevel VI via value properties.
TeknoAXE wrote:
Or, if the VI and it's inputs are left on it's own and I try to write values to the controls of the inputs, I can definitely change button positions, but, looking at the signal flows, no signal will be sent from the connected controls to the sub-vi.
Of course you need to call the subVI from a parallel loop (for example) so other parts of the code don't get blocked.
TeknoAXE wrote:
A second problem is that, due to my use of a program button that latches when pressed, I'm having a tough time trying to manipulate it will local variables or property nodes. Because of the way it functions, the "value" property nodes shows up as purple and I'm not sure how to make it tap itself to operate how it did in the Sub-VI.
Latch booleans are not compatible with locals and value properties. A latch action boolean turns true until it is read by the code. If you were allowed to read (and reset it) it from multiple locations and via multiple mechanisms, you would get completely unpredictable code. You can always use switch action booleans and simulate latch action as needed using e.g. local variables.
It is difficult to give more specific comments without seeing the code. What are the subVIs doing? Are they interactive too?
If you don't mind attach your code and we will give more specific advice.
LabVIEW Champion . Do more with less code and in less time .

My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
Help!

No, unless you are using a home theatre system already, your only option is to connect to the TV.

MacBook not sending signal to external display - was working fine before.

hi guys, i have a unibody macbook and i've been hooking it up to my tv for almost 2 years now using the mini display port to hdmi adapter and hdmi to my television.
tonight the macbook randomly stopped sending signals to the tv. i tried two tvs with two different display adapters as well as a DVI monitor.
the displays are detected in osx but there is just no signal sending to it. anyone have any ideas? did my mini display port just die? i've tried several cables/adapters.

Hey,
I just experienced a similar problem as the original poster, except that I'm using a minidisplayport - DVI adapter and not HDMI. Been working fine on my external screen for 2 months now and suddenly the external says no signal?
Macbook still flashes a blue screen when plugging in the adapter but does not detect the external. Haven't ruled out that the adapter is busted yet, but worked fine earlier.
I tried resetting the PRAM without any change.
Any kind of software / hardware problems on the macbook?
Any thoughts?

My Mac Pro (2006) has suddenly stopped sending signal to the display monitor.

My Mac Pro (2006) has suddenly stopped sending signal to the display monitor. It coincided with plugging in an Epson printer via usb - while the system was running. Pretty dumb maybe? Could I have damaged the video card? Anyone ideas? Thanks

Howdy Le Batch,
I was looking into the issue you are seeing here, and came across a helpful article for this specific situation. It's named Apple computers: Troubleshooting issues with video on internal or external displays and can be found here:
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
If more than one video adapter is in use—or "daisy-chained"—troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Regards,
Sterling

Commutation with 6280 DAQ Card

Hello,
I want to perform parameter identification of a three phase brushless DC servo motor. Basically I want to obtain mass moment of inertia, viscous damping coefficient and coulomb friction at the bearing. To do so, I plan to apply a step voltage input to the motor terminals and collect the position information with a DAQ card. I know the inductance and resistance values of the motor windings as well as the I want to perform parameter identification of a three phase brushless DC servo motor.
Basically I want to obtain mass moment of inertia, viscous damping coefficient and coulomb friction at the bearing.
To do so, I plan to apply a step voltage input to the motor terminals and collect the position information with a DAQ card.
I know the inductance and resistance values of the motor windings as well as the torque constant of the motor.
So when I apply a step voltage input to the terminals of the motor, I would know the torque that is applied.
And since I know the torque that is applied and also collect the position data I would be able to plot torque vs. position curve and would be able to obtain the necessary parameters from this graph.
My problem is; I don't know how i can apply a step voltage input to a three phase brushless DC motor.
Is it possible to use a DAQ card (I have a PCI 6280 DAQ card) for commutation? If it's possible is there an example about commutation of brushless dc motor?
I don't want to use a motion control card to perform the commutation since I want to observe the motor dynamics only.
Regards.

Hello,
for commutation you need to synchronize the output signals to the absolute rotational position of your motor. Typically this is done by implementing a lookup table to output values according to the motor's angle of rotation. This operation requires deterministic real-time behavior, so you could use a DAQ board with LabVIEW Real-Time, but for your application an FPGA-based R-Series device is probably a much better choice.
Instead of generating analog output signals, with an R-Series device you could directly generate PWM signals with sinusoidal duty cycles to control an external FET amplifier.
Here you can find example code for such a setup.
I hope this helps.
Kind regards,
Jochen Klier
National Instruments

Sending photo with text issue

i, iPhone 4 shows "!" when sending text with photo. But I can send just the text. Have powered off/on. Tried in different locations. Signal good. Ideas?

Has it always done this?
Do you have a MMS plan with your cellular provider?
Does it do this on iMessage messages?

My ordi do not send signal through my Hdmi to tv

I used to have an excellent connexion between my ordi and my tv through my HDMI and suddenly my Tv do not receive the signal anymore?
I was wondering if there is something to do with Mavrick? or other suggestion?
Thank you

when I'm too use my appletv I use my tv's remote to choose the input source
in my case the hdmi 2 port
it of cause can't automatic switch because my sat box and ps2 are also sending signals too it so it don't know that I want it to show the appletv rather then any of the other connected boxes

Aironet 350 AP not sending signals to laptops !

Hi all,
This is the 1st time I use this service...I hope someone / Cisco can help me.
Background
We have Airnonet 350 AP system + PCI adapter + PCMCIA. We live in a 2 story house. The Server (Win XP) is downstairs connected to the Livebox ( France Telecom )for internet conncetion. All PC downstairs connect to this livebox and work very well. But, upstairs the portable PC receive weak signals, so internet is slow or often none at all. We installed the Aironet 350 AP upstair in a central location to receive signals from the Server which is in turn equipped with a PCI adapter to send to the 350 AP on 1st floor. It works beautifuly and efficiently for 4 years already..
NOW
Last week I changed the Server PC to a newer one, also running on Win XP. I transfered the PCI adapter to it, and installed the software for adapter from Cisco website (Win-Client-802.11a-b-Ins-Wizard-v1701). The Associations between the Server / PCI adpter, Airnonet 350 AP, and 2 laptops on 1st floor are excellent. But, the Laptops on 1st floor just could not have access to internet ! I have tried many different manipulations.. but no success.
Has anyone come across this pbs ? Do we need to do something to the 350 AP ? if yes, what is it ? Is there an upgarade of s/w for the AP 350 ? Etc ...
I'd loved to hear from you to help me to solve my pbs, otherwise my 2 daughters just do not have internet connections !
Thank you in advance.
Joseph
email : [email protected]

Tks John for your suggestion.
However, the 2 laptops were working well already while they were connected wirelessly to the old server, except the speed was not so fast.
Seeing the new server giving us connection pbs for upstairs, I have gone backward, and put back the PCI adapter to my old server which sends signals to the Cisco AP upstairs. Now, both laptops upstairs are receiving internet and working correctly. To improve the speed up of this old server, I have removed all unnecessary programs etc ...so the speed is better. The girsl are happy.
The only down side is that I have got this brand new server / PC which is not doing what it is bought for ..
Frankly, I am still at a loss why the new server does not work with the Cisco AP !
Do you still have some other ideas ..?
Thank you in advance.
Joe

Catching POSIX signals with labview

Hi,
is there a way to catch POSIX signals with LabVIEW.
Im building a LabVIEW Client (Linux AND Windows) to a non LV Server
(Linux, C). All works fine except the catching of the interrupts sent
by the server. The server sends interupts using POSIX signals. For full
functionality I should be able to catch this signals. How can I do
that?
Thanks for your help
Ulrich

Interesting project!
I looks like a few people have tackled decoding the data (both WWV and WWVB) using reciever modules that create a digital signal stream and Arduinos to decode the data.
How about GPS based time? Here is reciever/decoder module that provides a decoded serial data stream:
http://www.parallax.com/Portals/0/Downloads/docs/prod/acc/GPSManualV1.1.pdf
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~

Casio CDP-100 not sending signal into Logic Pro...

Hi All,
I'm new at Logic Pro and trying to figure out how I can get my Casio CDP to send signal into my Logic Pro studio. I have an Mbox 2 and have connected the Mbox and Casio with Midi in/out and the Mbox is connected to my Mac through USB chord. What am I missing/doing wrong? Thanks for the help!

trying to figure out how I can get my Casio CDP to send signal into my Logic Pro
Here's something you could try. (These instructions are basically for 10.6; in 10.5 it's similar.) Find this program:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
Launch it. Use the Window menu to show and view the MIDI window (which is probably called "MIDI Studio"). It should look something like this (this screenshot is from 10.5; in 10.6 it's similar):
You should see that icon marked Mbox 2. Do you?

Sending signals with 6280

Similar Messages

Maybe you are looking for