Sending SNMP traps using JDMK from a SunOS 5.8 workstation
Hi,
We are using JDMK 5.1 for sending traps. This works when I run my java application (sending the traps) on my Windows desktop, where I have installed the JDMK.
I want to run my application on a Sun workstation . For this I copied the JDMK libraries and traps are not received by the SNMP Manager. I would like to know the procedure for using JDMK from Sun OS. Do I have to install the Agent on Sun workstation rather than just copying the libraries?
Thank you for the help.
-Rejani
There is a big difference between an app that isn't sending traps and one that isn't receiving them.
You aren't eating exceptions in your code are you? If not then that means the traps are being sent. And if so then it means it has nothing to do with your application and probably nothing to do with the box and probably does have something to do with the network.
Similar Messages
-
Cisco WLC 5508 not sending SNMP Traps
Hello Everyone.
I'm having a weird error on our WLC environment. We have an HA with two cisco WLC 5508 and i cannot get SNMP Traps working on a Windows PC running Kiwi Syslog server (free ed.).
I can receive correctly Syslog messages, but not traps.
I Tried also to send SNMP Traps from WLC to a different PC using Linux with snmptrapd and it works fine.
I tried then to send from my Linux box a snmp trap to my Windows PC, and it works fine, but i still cannot receive anything from WLC.
Using Wireshark to detect traffic, i cannot see any packet on udp port 162.
I cannot figure out any problem with my scenario, but i can see the following errors on syslog:
*rmgrTrasport: Mar 30 16:08:22.602: #RMGR-3-INVALID_PING_RESPONSE: rmgr_utils.c:270 Ping response from <my_windows_PC> is invalid. Ip address do not match.
My WLC Version is 7.6.130.0
Thank you for your support.I have gone through your query and found the following fruitful links ,please let me know if it helps and mark it correct answer if it is.
https://www.manageengine.com/network-monitoring/help/userguide/processing_traps.html
https://rscciew.wordpress.com/2014/10/12/snmp-configuration-on-wlc/
Thanks :) -
Experiences with sending SNMP-Traps to 3rd party (Nagios)
Hello Colleagues,
i'm working on a project where we would like to monitor our databases additionally sending SNMP-Traps to Nagios.
At the moment i'm using net-snmp-utils and snmptt. The snmptt-traphandler is running in daemon-mode and passes incoming SNMP-Traps to Nagtrap.
Now i want to create passive service checks. For example a passive service check for TBS_Usage for database 'exdb' which returns the values from the incoming SNMP-Trap.
Has anyone experiences by implementing the SNMP Notifications (to Nagios)? Is there an easier way to implement this than using snmptt?
Does anyone know, how the MIB (snmptt.conf) must be configured for the passive service check?
I'm looking forward hearing from you soon!
Best regards,
SönkeHi Nikhil!
Basically I am trying to set trap forwarding to a
a NNM on the network from sunMC 3.5 Update 1.
I have followed all the directions in sunMC snmp FAQ
and other threads on this forum but I am not able to
set the trap destinations.<snip>
Other thread having same question is
http://forum.sun.com/thread.jspa?threadID=15625&tstart
=0Have you reviewed the options in the other thread? (i.e. Halcyon SNMP integration or HP integration packages). Both are off-the-shelf and if you can understand SunMC SNMP infrastructure you certainly wouldn't have trouble configuring either. If you've looked at both packages, what parts made you decide not to use them? Note: I work for Halcyon.
Building your own custom integration with direct traps may be difficult: the generic snmp faq doens't have all the info you need to do so (i.e. how to get NNM to go backwards to an Agent to request the details of an event like "Warning /op is 95% full" or "Critical: Power Supply 2 is Offline"). I'm not even sure how I'd go about it, and I've been using SunMC for years :)
Regards,
Mike
([email protected]) -
Enterprise Manager Grid Control can send SNMP Traps to third-party?
GC 11.1
It looks like a simple config, but I've got into a confusion about it.
I'm trying to figure out the configuration to send SNMP traps to a third party server.
My scenario is:
Node A (managed, monitored) ---- GC box------ SNMP box (final destination).
My understanding is that the traps (notification methods) configured on GC box are generated by the Agent on Node A, then received by the GC and distributed as e-mails.
What is the config to set the traps from A to reach SNMP box?
There is the help page from the GC page (confused about interpretation):
"Add SNMP Trap pageThe Add SNMP Trap page enables you to provide the name of the host (machine) on which the SNMP Master Agent is running and other details so that SNMP traps can be sent through Notification Rules.
An example is shown below.
Name HP OpenView Console
Description Notification method to send trap to HP openview console
SNMP Trap Host Name litleguy.us.oracle.com
SNMP Host Port 162
SNMP Community public
This SNMP host will receive your SNMP traps.
Note: A Test Trap button exists for you to test your setup."
Any suggestions are highly appreciated.
Thx,Please reply with the specific questions around this.
11.1
EM can send SNMP traps to specific designated receivers. You create an advanced notification method (of type SNMP Trap) with the appropriate details about the receiver.
(See Setup->Notification Methods)
In the notification rules UI, you specify the alerts you are interested in forwarding and select the SNMP trap advanced notification method you created earlier.
The SNMP receiver should be provided the correct MIB that defines the SNMP trap. There were some bugs with the MIB definition in one of the releases (don't recall which one off hand), so if the traps you are receiving don't match what the receiver expects - please let us know and we can point to the right one.
regards -
Can SOA suite send SNMP traps?
Hi!
I've looked in a lot documentation to find whether the SOA suite supports sending SNMP traps or not.
It can be done in Oracle Enterprise Manager 10.2.0.3 10g Release 3, but can it be done in EM 10.1.3.1.0 10g Application Manager Control?
(I can't find it there anyway)
/PerIMHO the SOA Suite itseld is not able to send SNMP traps. You could implement it in for example in BPEL, with sensors. You call a java class that performs the SNMP trap. Or you make a generic BPEL process that sends SNMP traps based on the incoming payload via embedded java, and call this process from ESB or BPEL whenever you want to send a SNMP trap.
-
We keep getting thousands of entries in the CAM event log like this:
SNMP trap is received from switch [<ip address>] which is NOT in our database.
apparently, these aren't NAC'd switches. Why does the CAM see these and how can they be eliminated from the Event Log?
Thanks,Matt,
Do you switches have the CAM as a host where they are sending traps? Check the running-config of the servers and see if you spot the CAM IP address as one of the snmp-servers.
HTH,
Faisal -
Hi All,
I want to use Snmp Traps for SSIS packages.If any error in Package,
I want to send notifications to main server.
How can we implement in SSIS.Can we implement in SSIS?
If anybody knows please tell me it is very urgent.
Thanks in Advance.I've not used it
But you may try code like below within script task in SSIS
http://www.c-sharpcorner.com/forums/thread/59866/sending-snmp-traps.aspx
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
How do I send a text using messages from my macbook to an iPhone phone?
How do I send a text using messages from my macbook to an iPhone ?
I tried to send it to their phone number, but it said they were offline. And they downloaded iMessage for the iPhone but it still wasn't sending from my computer. Is there some kind of trick?
-
i've got my box sending general traps, but i've noticed Sun Volume Manager requires separate configuration for this using /etc/snmp/conf/mdlogd.acl. How can i now verify that i will get traps if my internal drives (mirrored using meta commands) have issues or fail? is there a meta or md command i can issue as a check?
thanksHi Rolf,
Thanks for the information. It helped me.
I have configured the trigger event to use the track instead insted of the syslog. And it send the traps to the server.
sysUpTime.0 = 1805405563
snmpTrapOID.0 = cEventMgrMIB.0.2
ceemHistoryEventEntry.2.3 = 211
ceemHistoryEventEntry.3.3 = 0
ceemHistoryEventEntry.4.3 = 0
ceemHistoryEventEntry.5.3 = 0
ceemHistoryEventEntry.6.3 =
ceemHistoryEventEntry.7.3 = applet: TRACK_SNMP_TRAP
ceemHistoryEventEntry.9.3 = 0
ceemHistoryEventEntry.10.3 = 0
ceemHistoryEventEntry.11.3 = DOWN
Cheers!
Win -
Hi all
i am using Oracle Weblogic Server ,Please help me to send user authentication log traps through snmp ,like Successful authentication ,authentication failure ,etc
i have configured the followings
1.I have configured DefaultAuditor for my Realm and log are written to DefaultAuditRecorder.log.
2.Configured SNMP Log Filter for the SUCCES and FAILURE severities. but no lucks
Thanks in AdvanceHi,
Could you please follow the below Doc id:-
SNMP How To Get WLS Server Health State On SNMP Trap (Doc ID 1559331.1)
Sample Code to Verify That SNMP Trap Notifications are Being Created (Doc ID 1278408.1)
Regards,
Prakash. -
I can't send a text using imessage from my iphone to an ipad
I can't send or receive a text using imessage from my iphone to an ipad
The Ipdas are using IOS 6 and can text to other iphones by phone number or apple id. I have tried hard resets and did a full restore and still no success. I am using IOS 6.0.1 and have had the phone checked at our local Apple dealer and I took it to the local ATT store to be sure my phone plan was not an issue.
-
Can send to SMTP using SSL from everywhere but home!
Hi all,
This is a very very peculiar problem and god knows I have had my share of strange problems with computers but I think this one tops them all. The situation is the following:
I would like to be able to send email using my work SMTP server which requires a secured SSL connection. I have the correct configuration in Mail. When I am at work, I am able to send emails with no problems. When I am anywhere else (free wifi at mcDonalds, friend's home,..) I can send no problem....But I CAN'T SEND FROM HOME!!
I get an error message telling me to try another server. I have tried pinging the server from home and there is no problem there. I have also tried Outlook Express running on Parallels on the same machine and from home and there is also no problem: the emails go through!
If anyone has any suggestions, I would really appreciate it as I am about to go crazy!
Thanks!K.,
Try a test by creating a New User Account, and as that New User launch Mail and try setting up this work related account, and then test sending. See the following if not familiar with adding a new user account:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
The reason for doing this is to test the Mail app itself, and not to permanently switch to a new user account. If this account is a POP account, be sure to select for it to leave messages on the server after download. That would not be an issue with type IMAP.
Ernie -
When sending iMessages using iPad mini an old photo that I've deleted from my MacBookPro in 'System Preferences/User&Groups' pops up with each iMessage I send. Genius Bar said iMessage was pulling this from iCloud and they recommended I change the photo inmy iCloud account, which I did. This did not help. Where could iMessage be gathering an old photo that's been deleted? Has anyone experienced this? and if so, is there a solution/fix?
I don't follow where this picture is appearing. You have to go to some trouble to add a picture to an iMessage. Might it be popping up from a contact name you are using that happens to have a picture associated with it in your contacts list?
-
Sending an Email using JavaMail from the Net Work of my company not workin
Hi,
If any body would reply to this issue as soon as possible..
I have developed a simple java mail program which sends an email to gmail (smtp.gmail.com) and works fine at home , So when i sent the same
from my office(at company) it did not work and exception was reported saying ...... could not connect to host .smtp.gmail.com... port .. .
I think it's a network problem.
So If any body has a suggestion ?
If so can any body give a simple code for this issue.
Regards,No, I don't mean the msgshow.java demo program. I mean the [JavaMail FAQ|http://java.sun.com/products/javamail/FAQ.html].
In particular, the section about debugging connection problems and the section
about connecting to Gmail.
Find it yet? -
How to send php email using email from recordset?
Hi
I know the headers to use for php mail(), and I use it for
the contact form for my viewers in order to contact the directory
listing's email address ( of which I have hidden by using the words
'Email Us' and use the id to carry through to the form).
I have sucessfully used the $to = [email protected] but when I
want to use the $row_?['email'] it will not send.
Any suggestions? I use a recordset to retrieve the id of the
listing to the contact form.
I will want to follow the same procedure for my jobseekers to
contact employers job adverts.
Thanks
TheresaHi,
There are many sms gateways that have their own api to send sms. You can use them for sms. (They will charge you for the sms!!!)
Moderator edit: Link removed
Thanks
Edited by: PhHein on 20.10.2010 16:11
Maybe you are looking for
-
Problem in loading oracle 8.1.5
I have loaded oracle 9.0.1 database on my server successfully. since my application is in oracle 8.1.5, I tried to load oracle 8.1.5 but it gives a message saying error occurred during loading with the options of either stoping all components or that
-
Up to the period : Fiscal year period Exit variable is not working
Hi Experts, I have the following code to get the upto the Fiscal year period variable .It shoudl fetch the Values From the starting of the Fiscal period like 2009001 whatever the period user enters.But currnelty it is not woking.Please let me know
-
Sub:To change a vendor - reg.,
Hi guru's can we change a vendor after creation of a p.o. through me22 and what can we change in a p.o. thanks in advance tulja singh
-
Are there other podcasting tools besides iTunes?
When I listen to a podcast with iTunes, I always have to let the individual item download to my computer. There are podcasting tools available for Windows that allow for either streaming right from the server OR downloading. If I were to purchase a
-
After upgrade to iOS5, 1/3 of app icons are blank.
The buttons with title are there but no logo picture.