Sending to a dedicatede to Queu in PI
Hi,
We have an important inteface sending data to PI which sends data further to R3.
When PI recieves data related to the interface we want data to be put on dedicated output queu (smq2) used only by this interface. We want to name the queu ourselves? Anybody who know how to do that.
Regards.
Ugur E
There is a concept called Queue Prioritization which you can check out:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6?quicklink=index&overridelayout=true
More information is available on SDN...you can search for it, if needed.
Regards,
Abhishek.
Similar Messages
-
Program sending queries to a RFC Queue
Hi experts!
I have a program that is sending queries to outbound RFC queue ( T/ smq1). How can i know the name of this program and how can i stop the queries?
Thanks to all.Hi,
Double Click on the Queue Name and check all the columns in Next screen.
Second last column is for Program Name.
Regards,
Ranjit Thakur.
<b>Please Mark The Helpful Answer.</b> -
Sending messages concurrently to JMS queue
Hi,
I am using Weblogic 10.3 JMS. I have a .NET producer sending messages to a JMS queue using a threadpool. A Java consumer will be consuming the messages. Is it possible to pool the conections/sessions from the producer side to send messages concurrently from the threadpool. Please help.You can use standard .NET threading to produce messages in different threads.
Keep in mind that producers and session instances themselves must not be multi-threaded, although they can all share the same connection.
When you code, each thread could have a dedicated session and producer.
Alternately, you could write a very simple pool that the threads share to cache producers. On the other hand, sessions and producers are light-weight once they've been created, so there's often little need to go through this trouble.
Tom -
Unable to send message in Service bus queue through Webrole which are connected to Azure VPN
I have created two Azure VPN and two cloud services(deployed webrole) and one service bus queue
First Azure VPN and cloud service(deployed webrole) is created in same affinity group.
Second Azure VPN and cloud service is created in West US
Service bus queue is also created in West US.
When I send message in service bus queue from first cloud service (same affinity group) then message sends successfuly
but when I send message in same service bus queue from second service(West US- Webrole) then unable to send message and not throwing any exception.
I don't know, whats happening?
Its very urgent..... client is waiting.
Please help me... Thanks.
hemaThanks for reply. Got the cause but still looking for solution.
Actually we have created Azure VPN using Express route and
all are configured for Private Peering.
Try to access service bus queue from Web role which is attached to Express route network.
I am unable to access service bus queue and send message...because cloud services deployed in virtual networks are supported over the private peering path.
There are 3 types: public, private and default route (forced tunneling).
How can be configured for all 3 which will force all traffic through the tunnel except for Azure public service?
Do you have any idea on this scenario?
Thanks.
hema -
Error while sending the messages to JMS Queue
Hi ,
I am trying to pick the file from JMS Queue and send the response xml as outbound message to JMS Queue again using XAI Sender
I Created XAI Sender, Outbound Message Type(DM-RCVRESP) and configured these two with External System.
I am able to pick the file from JMS Queue but unable to send the message through XAI Sender (Real-time)
Plz find below the error trace getting.
[Wed Jun 15 16:12:09 IST 2011] Error while processing sender "UPLOADSTG" : Unable to update response in staging table: Row id not given.
com.splwg.mpl.sending.SameThreadSendingManager$ProcessException
at com.splwg.mpl.sending.SameThreadSendingManager.processDestination(SameThreadSendingManager.java:341)
at com.splwg.mpl.sending.SameThreadSendingManager.sendResponse(SameThreadSendingManager.java:293)
at com.splwg.mpl.sending.SameThreadSendingManager.doSend(SameThreadSendingManager.java:249)
at com.splwg.mpl.server.async.ExecSendRequestProcessor.ProcessRequest(ExecSendRequestProcessor.java:61)
at com.splwg.mpl.server.async.RequestProcessingThreadAdapter.run(RequestProcessingThreadAdapter.java:46)
at com.splwg.mpl.server.PooledThread.run(PooledThread.java:91)
at java.lang.Thread.run(Thread.java:662)
Please guide me in this regard..
Thanks,
sukumarWhat have you configured for the response tab for the sender? Are you using the MPL or the MDB?
Take a look at:
MPL Best Practices (Doc Id 1308165.1)
Oracle WebLogic JMS Integration (Doc Id: 1308181.1) -
Application fault for Sync Send holds up the ccBPM queues
Hello Experts,
I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
Any thoughts on how i can achieve this?
Thanks in adv.
DipteeHello Experts,
I have the following scenario which I have realized using a ccBPM in SAP PI 7.31.
I receive a nomination idoc from ECC from which I create a nomination request to be sent in Sync manner to a web service. The response received from the web service is sent through another idoc, back to ECC. In case of any failure during this, an ALEAUD idoc is sent back to ECC to convey the failure. This web service returns an application fault in case any data in the request is improper and there is no fault message in the WSDL for the web service.
I have used a ccBPM to receive the nomination idoc from ECC, transform it to web service request and send it using a Sync Send step. In case an application fault occurs, the SOAP receiver channel shows the error as application fault and my Sync Send step does not receive the expected response. However, a SOAP message with envelope is received from the web service which leads to the BPM queue land in error 'Permanent error in BPE inbound processing'.
However, in case of the application fault I want to make the Sync Send step trigger an exception so that the ALEAUD idoc is sent back to ECC system.
Any thoughts on how i can achieve this?
Thanks in adv.
Diptee -
Integration Broker : Sending peoplesoft Data into JMS queues using IB
Hi All,
I am working on integration of peoplesoft and SOA middleware. I am basically SOA middleware developer. So not much aware at peoplesoft side.
My requirement is that need to extract information from peoplesoft and send it to third party systems(through JMS queues) and also i explored that Integration broker is going to help in such cases.
Could you please answer my some of the questions.
1)How can i extract information of peoplesoft. lets say i need to extract customer data from peoplesoft.
2) steps to send above extracted customer info to third party system using integration broker.
It would be sending information to JMS topics.
So please let me know how we can handle JMS queues in peoplesoft.
Please refer the related documents for outbound interface strategies.
Thanks inadvance.
Edited by: PraveenT2 on Jun 3, 2009 4:06 AMMike,
Biztalk do have Peoplesoft Adapter. Just configure it and use appropriate Component Interface to push or pull the data.
Thanks, -
Sending BUPA_MAIN into the RFC queue
Hello,
I would like to send BDoc <b>BUPA_MAIN</b> into the RFC queue
(must be default for Business Partner), for selected BP from my report.
I know how to send bupa_main direct to the site, but it is not the same.
Can anyone help me with this ?
Regards, RobertHi Vikash,
thanks for the answer.
Unfortunately this tx has sent BP <b>direct to the site</b> not to the queue.
Flow context (smw01) shows MO4 (mBDoc Direct Send) for Bupa_Main.
And for test I stopped all queues in tx: SMQ2.
And maybe there is a problem with the RFC configuration ?
In transaction after BP is selected new window "SELECT SITE" shows,
and what I can see is one line where :
RFC Destination = NONE
# = empty
Log.System = empty
Site Type ID = CDB
Site ID = some guid
What do you think ?
Best Regards,
Robert -
Howt to Send XML file to JMS Queue instead of text string.
HI,
I am doing a project on JbossSeam.
I am using JMS. I am sending/adding plain text to the JMS queue
and geting it back from the JMS queue as
I wanted to send/add an xml file to the JMS queue and wanted to recieve the same xml file from the JMS Queue .Never mind... I see you cross-posted this question all over the place. Maybe it will get answered somewhere else.
-
Sending message to a JMS queue and making DB update through a single container managed transaction
Can we use container managed transactions to send message to JMS queue and make DB updates in a sigle transaction. If yes then do we need 2pC license. I am using weblogic 6.0 SP2 and my database driver do not supports XA
If your JMS provider is XA compliant, you can.
If you are using WebLogic 6.0 JMS, it supports 2PC.
The JDBC resource that does not support XA can participate in the global transaction
creating a TXDataSource and setting "enable two-phase commit"=true in the Configuration
panel.
About the JMSConnectionFactory, on the console, in WebLogic 6.0, in the "Transaction"
tab folder, set "User Transactions Enabled"=true.
In your code, use non-transacted sessions.
For 2pc protocol, you need a license or you'll get an exception.
Sergi
Manoj Bansal <[email protected]> wrote:
Can we use container managed transactions to send message to JMS queue and
make DB updates in a sigle transaction. If yes then do we need 2pC license.
I am using weblogic 6.0 SP2 and my database driver do not supports XA -
Transport rule exchange 2010 not sending reply gets stuck in Queue
I am trying to set up a transport rule in exchange 2010 that will auto reply to a email address that is no longer valid. One of our exec passed away and they want a reply setup to send an automatic message. I read somewhere that the auto reply may not be
the right way to go about this so I was trying to setup a transport rule. I used the wizard to make the rule for conditions 1 all outside email addresses 2 sent to the internal email address specified. Actions 3 Send rejections message to sender with enhanced
status code
Created the message in the rule and gave it a status code 5.7.228 no exceptions and created the rule
Went to an outside email account and sent to the internal users account. It was reported that it was delivered from our mail filter I verified that it did not get delivered to the user then a few min later the reply appears in the queue viewer on exchange
a few min later it is gone I figured it worked but when I checked it did not get delivered to the outside email address or seen going through the mail filter. I'm missing something I know its right there somewhere just looking to long and I cant see it.
This is baffling me as to what happened? What account is it sent from? The user, administrator or do I need to create a postmaster account for it to work? I am a one man shop and it get kind of baffling some times
Thanks in advance for any help I will keep looking for the answer
John R
John RHi John,
From your description, I would like to verify the following things for troubleshooting:
1. Please verify if users can send messages to external email addresses.
2. Please check if internal users can receive the rejection messages.
Best regards,
Amy Wang
TechNet Community Support
Yes users can send to external address and internal users receive NDR rejection messages
The system has been in production for 2 years. I'm just trying to find the best way to setup a auto reply for users that are no longer with us or have moved on.
Thanks for your help
John R -
Sending multipart-SOAP to JMS-queue
Hello,
we have SAP -> IDoc -> XI -> JMS -> Sonic MS scenario.
On JMS-receiver adapter, we are sending the XML-message with a SOAP-envelope. We do that by selecting Entire Message = JMS Payload. XI creates so called a multipart SOAP-message, where the XML-message is linked to the SOAP-body.
content-type: Multipart/Related;
<SOAP:Envelope xmlns:SOAP...
<SOAP:Header xmls:...
</SOAP:Header>
<SOAP:Body><s
<sap:Payload xlink:type='simple' xlink:href='cid:payload-17790B480DD1D407E10000000A202638
</SOAP:Body></SOAP:Envelope>
--SAP_c0c85c80-0fb0-11dd-a5e9-0017a4772420_END
content-type: application/xml
content-length: 4077
content-id: payload-17790B480DD1D407E10000000A202638
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ZQMTBASE01 xmlns:ns0="urn:kone:com:elias"><IDOC BEGIN...
</IDOC></ns0:ZQMTBASE01>
First, is this possible or are we doing something totally wrong? Since the people at Sonic-side complain that our SOAP message is not a real SOAP-message. They would want the XML-message inside the SOAP-body message.
Br, JuhaYou can easily create a SOAP message with an XSLT mapping.
There are some examples in the forum.
Regards
Stefan -
Sending calls to a second queue?
It seems like i could do this a couple different ways, just trying to find a best practice...
2 support desks (support desk Chicago and support desk Denver)
Support desk Denver is already up and running on it's own script and CSQ
Support desk Chicago is new, it will have it's own CSQ and script (same UCCX server). However, we want to make sure that in the event of issues at Chicago, calls would be redirected to Denver (no agents logged in, wait times in excess of 10min, etc).
My Chicago script currently has all those contigencies pointing to a "goto:denver_redirect"
The question is what to do from that label (denver_redirect) onward...
Do i just create a second queue in Chicago's script that mirrors the same queue environment as Denver's? Is there anything to be concerned about having two scripts(Chicago and Denver) pump calls into a single CSQ (Denver)?
Or do i just do a call redirect to Denver's Unified CM Trigger from the Chicago script?
Thanks!Given that we usually serve more than one master when designing call-flows (Call Routing, Reporting, Workforce Management), I would at least consider the impact it would have on call-type and SLA reporting. To name a couple of things off the top of my best practice list:
1. Consider primary and secondary skills (this will allow for load-balancing as well)
2. Having a seperate script will allow more flexibility in sovling for business requirements around call-routing
3. The more CSQ's, the more reporting
Peace,
Michael Clendening
CCIE #6487 (ISP-Dial) -
How to send message from one project queue to another project queue
Hi ,
In my scenarion I have project where y destination is queue viz queTest.
In the second project my input is JMS queue . where I to point this project input queue is queTest(first project queue).
Please suggest me on this as I am working first time in Java CAPS
Thanks in advance.Hi Bolla,
If I understand correct all you would need to do is in your connectivity map, publish the data to that queue.
example high level hierarchy
prj1Data1
-Indata1 svc
-Indata1 topic
-Indata1Translation svc
-Outdata1Delivery svc
-queOutdata1
prj2Data2
-Indata2 svc
-Indata2 topic
-Indata2Translation svc
-Indata2Delivery svc
cmData2Out Indata2Delivery publishes to queOutdata1
Hope this helps and does not add any additional confustion. -
How to send to Weblogic 9.1 JMS queue from EJB running in Glassfish?
Hi.
I hope this is the correct forum.
I need to send a message to a jms queue on a remote weblogic 9.1 server. To this end I believe I will have to:
1) Install one or more weblogic client libraries/jar files on my glassfish application server. The weblogic server expects communication in the "t3" protocol, which I believe tunnels iiop, jms etc. inside their own proprietary protocol
2) Define the jms queue in my glassfish application server with a queue connection factory that creates the queue using classes from the weblogic jars?
3) Otherwise code the EJB methods sending messages as I would code and send messages to any jms queue
It's the first two steps that have me baffled. The more I dig in glassfish administrator's manual, the more confused I become.
Anybody have any idea if/how this can be accomplished?
Some reference to where I may find information as to how to accomplish this?
Thank you,
Jacob.Jacob,
I suggest you try, either a GlassFish forum (http://forums.java.net/jive/forum.jspa?forumID=56), or perhaps the GenericJMSRA project https://genericjmsra.dev.java.net .This forum is primarily about the Sun JMS provider, Java MQ or Open MQ -- or the JMS Specification.
-- Ed Bratt
Maybe you are looking for
-
i have the photo library and then another album and i transfered pics from the stream to the other album and when i do to belete them from the original stream it say do u want to delete everywhere but i only want to delete on copy .. how do i do that
-
UGH. many problems, after 3 replacements during the summer
So, during summer i got 3 replacements, about 7 days apart, after first getting it. A few months ago it started being ridiculous again. Problems: 1) I've used the DVD drive (it's a burner too) 4 times. 2 of those times i had to reinstall the OS; I th
-
How to install printer which is not listed in the software list
I just bought Canon MX372 and I am having a hard time installing it. I have installed the software that came with it and yet I can't add it as printer? It is always giving me a msg to update the software and when I accept to update it takes a minute
-
Bad ithmb files preventing PhotoLibrary backup
I am having problems backing up my iPhoto Library. I have tried various methods, to two different destinations, and get a message about a bad ithmb file which aborts the copy. When I tried to discard that ithmb file, I get the same message for anothe
-
MobileMe photos stored in Aperture from other computer
I have two computers, I shot photos on my laptop and posted them to MobileMe, when I opened up the desktop it picked up the MobileMe photos when it synced with the site. Are those photos stored in my library? How do I make sure they stay in my Libr