Sensor Accuracy and Ways to Improve?

I know there's been a lot of chatter about accuracy problems since the device came out years ago. What I'm curious about is if anyone has had improved accuracy by going from a lace-attached sensor (using any of the 3rd party ways to do that like runaway or lacelid) or if they went ahead and carved a hole in the sole of their shoe.
I've tried 2 different lace methods and I'm still 1/5 of a mile off which seems huge to me. So I'm tempted to cut a hole in my NEW running shoes and just want to see if its worth it before I go chopping them up.
So basically, is placing the sensor in the sole the most accurate way?
Thanks

Before chopping up your new shoes, you may want to look into the following:
http://www2.yoursole.com/products/footbeds/signature/dk-plus?id=xwwtiCC8

Similar Messages

  • Is there any way of improving compatibility between ipad 4 and windows xp                                                     p

    is there any way of improving compatibility beween ipad and windows xp

    Hi Smokey0422,
    Although iTunes works with Windows XP, iCloud is not supported - so that does limit the functionality somewhat.
    See the resources for your iPad at the following site:
    http://www.apple.com/support/ipad/
    See the setup instructions below:
    http://www.apple.com/icloud/setup/pc.html
    Cheers,
    Judy

  • Is there a way of improving my graphics on my early 2011 macbook pro 13"?

    Does anyone know a way of improving the graphics capability for OpenGL with the Intel 3000 chips in the early 2011 MBP 13"? I bought it not realising the graphics chips had been downgraded and now as a result struggle to do any CGI work that I rely on my computer to do.

    CHRIBAM wrote:
    I'm more inclined to go with Ogelthorpe's advice (if I had the cash).
    I agree with Ogelthorpe as well, the 15" and the 17" MacBook Pro also have dedicated graphics cards which give more performance than the Intel HD 3000 only graphics, which is really of MacBook type performance for consumer user. (playback of video and that's about it)
    Still wondering why Apple went backwards for graphics in the 13", I completely missed the change.
    I'm peeved at Apple for the fact that they didn't make a clear distinction of the disadvantages of the 13" with no dedicated graphics card then lumped it in with the 15" and 17" which do.
    To Apple it's a matter of performance for price, the 13" scores 11 on Cinebench, the 15/17" score 30 and 45, so the  13" doesn't even come close. But it comes in the same silver case, the same "MacBook Pro" name, when in fact it's not so.
    Apple knows people would be attracted to the performance of the MacBook Pro name in a small size factor, the price is also attractive to the younger crowd, the younger crowd are also interested in running 3D games, which need a more powerful video card.
    Your not the first who's complained and feels burned, you trusted Apple was selling you a powerful MacBook Pro machine and you've got a consumer machine instead.
    The 13" Mac laptop should have gotten it's own category, called it a MacBook instead and it should have come with white or black case. But that would have angered Intel most likely, who are trying to push integrated graphics on their CPU's so they own the whole show eventually.
    It's going to take a long time before CPU integrated graphics is ever going to beat dedicated GPU graphics, because 3D game detail is always going to go up until it finally reaches 3D raytracing at 200 fps.
    What Apple is doing is trying to get folks hooked on lessor quality/detail games, the ones you see on iPads and iPhones, and away from wanting rich detail which needs a powerful dedicated video card.
    So Apple lumps the 13" MacBook in with the MacBook Pro line, try to force the issue, next they will try it with the 15", integrated graphics on the low end model. Then again only dedicated graphics on the 17" model and so forth. Eventually developers won't make as many 3D games for Mac's because most people buy laptops, cuts into their potential sales.
    If you really want to run 3D games, you have to go with a Windows 7 desktop where the video card can be swtiched out.
    http://www.cbscores.com/index.php?sort=ogl&order=desc

  • Is There any way to improve the performance on this code

    Hi all can any one tell me how to improve the performance of this below code.
    Actually i need to calculate opening balance of gl account so instead of using bseg am using bsis
    So is there any way to improve this code performance.
    Any help would be appreciated.
    REPORT  ZTEMP5 NO STANDARD PAGE HEADING LINE-SIZE 190.
    data: begin of collect occurs 0,
           MONAT TYPE MONAT,
           HKONT TYPE HKONT,
           BELNR TYPE BELNR_D,
           BUDAT TYPE BUDAT,
           WRBTR TYPE WRBTR,
           SHKZG TYPE SHKZG,
           SGTXT TYPE SGTXT,
           AUFNR TYPE AUFNR_NEU,
           TOT   LIKE BSIS-WRBTR,
    end of collect.
    TYPES: BEGIN OF TY_BSIS,
           MONAT TYPE MONAT,
           HKONT TYPE HKONT,
           BELNR TYPE BELNR_D,
           BUDAT TYPE BUDAT,
           WRBTR TYPE WRBTR,
           SHKZG TYPE SHKZG,
           SGTXT TYPE SGTXT,
           AUFNR TYPE AUFNR_NEU,
    END OF TY_BSIS.
    DATA: IT_BSIS TYPE TABLE OF TY_BSIS,
          WA_BSIS TYPE TY_BSIS.
    DATA: TOT TYPE WRBTR,
          SUMA TYPE WRBTR,
          VALUE TYPE WRBTR,
          VALUE1 TYPE WRBTR.
    SELECTION-SCREEN: BEGIN OF BLOCK B1.
    PARAMETERS:  S_HKONT LIKE WA_BSIS-HKONT DEFAULT '0001460002' .
    SELECT-OPTIONS: S_BUDAT FOR WA_BSIS-BUDAT,
                    S_AUFNR FOR WA_BSIS-AUFNR DEFAULT '200020',
                    S_BELNR FOR WA_BSIS-BELNR.
    SELECTION-SCREEN: END OF BLOCK B1.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-NAME = 'S_HKONT'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    START-OF-SELECTION.
      SELECT MONAT
             HKONT
             BELNR
             BUDAT
             WRBTR
             SHKZG
             SGTXT
             AUFNR
             FROM BSIS
             INTO TABLE IT_BSIS
             WHERE HKONT EQ S_HKONT
             AND   BELNR IN S_BELNR
             AND   BUDAT IN S_BUDAT
             AND   AUFNR IN S_AUFNR.
    *  if sy-subrc <> 0.
    *    message 'No Data' type 'I'.
    *  endif.
      SELECT SUM( WRBTR )
             FROM BSIS
             INTO COLLECT-TOT
             WHERE HKONT EQ S_HKONT
             AND BUDAT < S_BUDAT-LOW
             AND AUFNR IN S_AUFNR.
    END-OF-SELECTION.
      CLEAR: S_BUDAT, S_AUFNR, S_BELNR, S_HKONT.
      LOOP AT IT_BSIS INTO WA_BSIS.
    IF wa_bsis-SHKZG = 'H'.
       wa_bsis-WRBTR = 0 - wa_bsis-WRBTR.
    ENDIF.
        collect-MONAT  = wa_bsis-monat.
        collect-HKONT  = wa_bsis-hkont.
        collect-BELNR  = wa_bsis-belnr.
        collect-BUDAT  = wa_bsis-budat.
        collect-WRBTR  = wa_bsis-wrbtr.
        collect-SHKZG  = wa_bsis-shkzg.
        collect-SGTXT  = wa_bsis-sgtxt.
        collect-AUFNR  = wa_bsis-aufnr.
        collect collect into  collect.
        CLEAR: COLLECT, WA_BSIS.
      ENDLOOP.
      LOOP AT COLLECT.
        AT end of HKONT.
          WRITE:/65 'OpeningBalance',
                 85  collect-tot.
          skip 1.
        ENDAT.
        WRITE:/06 COLLECT-BELNR,
               22 COLLECT-BUDAT,
               32 COLLECT-WRBTR,
               54 COLLECT-SGTXT.
        AT end of MONAT.
          SUM.
          WRITE:/ COLLECT-MONAT COLOR 1.
          WRITE:32 COLLECT-WRBTR COLOR 1.
          VALUE = COLLECT-WRBTR.
          SKIP 1.
        ENDAT.
        VALUE1 = COLLECT-TOT +  VALUE.
        AT end of MONAT.
          WRITE:85 VALUE1.
        ENDAT.
      endloop.
      CLEAR: COLLECT, SUMA, VALUE, VALUE1.
    TOP-OF-PAGE.
      WRITE:/06 'Doc No',
             22 'Post Date',
             39 'Amount',
             54 'Text'.
    Moderator message : See the Sticky threads (related for performance tuning) in this forum. Thread locked.
    Edited by: Vinod Kumar on Oct 13, 2011 11:12 AM

    Hi Ben,
    both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
    If you have no table index with HKONT as 1st field it's a full database access.
    If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
    Regards,
    Klaus

  • Is there a way to improve a photocopied picture?

    Hi,
    I would appreciate some help here.
    Is there a simple way to improve the look of photocopies of family pictures? Scanning did't happen and now I don't have possesion of the family album. I have started to scan in the photocopies and they look Ok, but I wondered if there was a program or something easy and inexpensive to improve the look of them at this point. If not, then they will be alright. But if there is a solution out there, please let me know.
    Thank you for your help.

    If you're planning a DVD slide show, the good news is that TV is pretty low resolution and you can get away with images that look terrible if they were printed. Some options:
    - whoever has the album, have them take pictures of the photos with a digital camera (strong light, but no glare; don't use the flash; lens parallel to the print, fill the frame).
    - smaller pictures hide defects, so put a border around the photo copies with a program like Photoshop Elements (I like it a lot, but it can take some learning).
    - make the pictures artsy and hide defects (color shifts; high contrast, copy sections of the photos and make a collage against a black background...).
    John

  • Is there a way to improve the performance of a report group?

    Hi gurus,
    Is there a way to improve the performance of a report group? 
    Points will be given later....
    Thanks!

    Hi there,
    Thank you for your response. I thought there's no answer for this issue and planning to change it to ALV.
    I looked at the codes and debugged it. After the select statement from ZZUWT table (customized), there's a loop that takes much time (10-12mins) for 1000 records. and several nested perform routines. It's a standard program so I'm hesitant to edit it.
    I'll be checking on the primary keys. If it's ok, may I ask for your assistance in this part? Though I'm not that familiar and haven't tried creating a report painter before.
    Thanks anyway...:D

  • Any way to improve response time with iPhoto 8.1.2 using Mountain Lion ?

    Any way to improve response time with iPhoto 8.1.2 using Mountain Lion ?  Can you store photos on a separate hard drive and use a smaller file for openning iphoto?

    How did you move your iPhoto library to the new system?  the recommended way is Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • My Published Pieces: Eight ways to improve your SAP supply chain operations

    Hello everyone,
    Fulfilling my promise to start sharing and contributing more towards the wonderful SAP SCN community, I've decided to share some of my widely-read and appreciated pieces, published over a period of time on SearchSAP.com website. These are collection of eight different published pieces to help improve your SAP logistics and supply chain operations.
    You can also register for Free on SearchSAP.com website, and immediately start reading some or all of my published pieces on:
    Eight ways to improve your SAP supply chain operations
    Now, here's the link: http://bit.ly/17ohtsQ
    Also, I wish to take this opportunity let you know all that I am indeed honored and humbled to see the massive popularity, appreciation and demand of my just-published book “Production Planning and Control with SAP ERP” – STILL ranked among the TOP 10 best selling books on SAP PRESS website: http://bit.ly/19t87Gg
    You can download the free reading sample (over 100 pages) of the book from this link:http://bit.ly/15BrXPl
    Until next time,
    Jawad Akhtar

    Hi Mohan,
    Good wishes become SAP Consultant.
    You have chosen right module for you and also you can check SAP CRM Sales too.
    Domain knowledge only gives you to understand easily when you learn SAP processes but it does not count your experience in IT field.  They will always ask relevant IT experience, so domain experience gives knowledge to understand SAP SD fast.
    Moreover, SAP authorized training institutes 30 days classroom training only and you can do certification immediately.  If you want to read through online then SAP offers wide range of online training to acquire certification.
    SAP SD Professional Certification - https://training.sap.com/shop/certification/p_sd_65-sap-certified-application-professional---order-fulfillment-with-sap-…
    SAP SD Associate Certification - https://training.sap.com/shop/certification/c_tscm62_65-sap-certified-application-associate---order-fulfillment-with-sap-erp-60-ehp5-g/
    SAP E Academy - https://training.sap.com/shop/course/tscm6e-sap-eacademy-scm---order-fulfillment-e-academies-095-nz-en/
    Best of luck.
    Regards
    GGOPII

  • HT201822 Is there a way to improve Apple's default "ignore accidental trackpad input" function?

    I find I frequently end up typing in the wrong place and/or deleting text because the size of the trackpad leads me to touch it accidentally, usually with my right hand below the thumb. Is there any way to improve on the built in function in Lion?

    http://www.apple.com/feedback/macosx.html

  • HT201335 Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

    Why the transmition to the tv from my iPad is slow cutting off ... Is there a way to improve connectivity ?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • HT5429 Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

    Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

    Hi Ben,
    both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
    If you have no table index with HKONT as 1st field it's a full database access.
    If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
    Regards,
    Klaus

  • Disable\Remove "Check for Update" "Lightroom online" and "Adobe Product Improvement Program"

    Hi,
    I wanted to confirm if it is possible to remove\Disbale the options like  "Check for Update" "Lightroom online" and "Adobe Product Improvement Program"
    under help menu in adobe lightroom 5.3? I intend to deply this application and want these options to be unavailable for the User.
    Kindly suggest, Thanks.

    So far as I know, the only way to make these features non-functioning is to detach the computer from the internet.

  • Measuring the one sensor above and one sensor below

    Hi
    Cn somebody help me in measuring one sensor above and one sensor below and if thy are almost equal must stop.
    I tried doing so, but i dont knw whr it is going wrong. I hv attached the program with this query.
    In a large cryogenic storage system,  we need to find the level of cryogenic fluids. For ths we a immersed PCB consisting of multiplexers and sensors into the storage system. We need to find the level by passing current to the PCB & measuring voltage at each sensor. We can conform the liquid level by measuring one sensor above and one sensor below the actual level.
    Thanks in Advance.
    Regards,
    Sujeep. 
    Attachments:
    liquidlevel1.vi ‏358 KB

    sujeep wrote:
    Hi
    Can somebody help me in measuring one sensor above and one sensor below and if they are almost equal must stop.
    I tried doing so, but i don't know where it is going wrong. I have attached the program with this query.
    In a large cryogenic storage system,  we need to find the level of cryogenic fluids. For this we a immersed PCB consisting of multiplexers and sensors into the storage system. We need to find the level by passing current to the PCB & measuring voltage at each sensor. We can conform the liquid level by measuring one sensor above and one sensor below the actual level.
    Thanks in Advance.
    Regards,
    Sujeep. 
    You should submit a little more detail as to what is going wrong.  Also, what do V1 through V6 represent?  They seem to be read from the same analog input channel.  You should try passing those value through with wires rather than using local variables.  If so, you could eliminate a large number of your sequence frames.
    In the 4th frame of your sequence structure, you could have a race condition.  You are reading V4 as a local variable around the same time you are assigning a value to V4 through the DaqMX read.  You don't know whether it is using the latest V4 value or the one from the previous iteration. 
    I would also recommend not using the STOP sign VI.  If you have a case where the program should end, you should wire the boolean out of the case structures and to the condition node of the while loop.  It will allow the code to end much more cleanly.  In your situation, the DaxMX close will never execute because the only way the program ends is through the STOP sign which is the equivalent of hitting the ABORT button.

  • Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

    Is it possible to hook a USB external hard drive to an iPad?.....the HD has video on it that I wanna watch on my iPad but don't wanna store it on iPad or iTunes....and way format does the video need to be in to watch on iPad?

    There are some wireless external hard drives that can be used with the iPad.
    The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
    Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
    Another option:
    Expand your iPad's storage capacity with HyperDrive
    http://www.macworld.com/article/1153935/hyperdrive.html
    On the road with a camera, an iPad, and a Hyperdrive
    http://www.macworld.com/article/1160231/ipadhyperdrive.html
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

  • I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2 . I do the normal steps of lens filter and choose dji, phantom2 , and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert

    I am trying to apply a lens filter in CS6 to a mp4 movie from the phantom 2+. I do the normal steps of lens filter and choose dji, phantom2+, and I click ok and the picture improves and there is less curve etc. What I don't know is why it seems to revert back to the old movie when I come back later on. I know I saved it but I must be doing something wrong. Here are my steps:
    Open an Mp4 movie
    Choose filter, lens correction
    Choose dii
    choose Phantom FC200
    click ok and the image improves.
    I then save as a name.psd and close the file.
    I reopen the file and it looks good. When I play the movie it just jumps back to the old curved horizon.
    What am I doing wrong? If you can help me I would be very grateful.
    Marc

    AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

Maybe you are looking for