Separate table title autonumbering for two named table styles?
I believe this very same question whizzed by a few weeks ago but I'm having no luck searching for it.
I have two named table styles. I want the autonumbering for the table titles to be separate. More specifically, one will autonumber as "Table t", while the other will autonumber as "Example e".
I have redefined the autonumbering counter for the second of the two TableTitle para style, and if I apply that style while in that table's title, I get the new autonumbering. But I can't transmit (a) selectively update the Table Title style to this format to other tables in the chapter. By extension, I can't copy the wonderful new table format to other chapters in the book.
I next tried creating a new para style "ExampleTitle", then in the Table Designer trying Update All. Nope, other tables of type example do not receive the new title style.
This is fully-patched FM8. The document is structured but I don't (want to) care about that -- I simply need to get the two different named table styles
to autonumber sequentially.
This is probably pretty easy once I learn the "trick"...(?)
Cheers & thanks,
Riley
Arnis:
Thanks. For some reason I couldn't get my table to update, so I went through and manually create a second table title paragraph style, then manually applied that. (I also created a second x-ref format so that I could x-ref to "Example n:" without including the colon in the x-ref, but that's another story...)
So for now I've worked around the problem. After I get this document out I'll revisit the issue. (Why do I have a vague recollection that there's a known idiosyncracy where FM6+ table styles don't update properly...?)
Cheers & thanks 'gain,
Riley
Similar Messages
-
Hi...
3....how to create table maintanence generator for a z table and how to use that for transfering a selected records to one server to another server.
thanks and regards,
k.swaminath reddyHi,
Table maintanance Generator is used to manually
input values using transaction sm30.The Table Maintenance Generator is used to create table maintenance program to add, modify or delete records in the database table. This can be accessed using transaction SE54 or in SE11 using the menu Utilities->Table Maintenance Generator
<b>
Follow below steps</b>
go to se11 check table maintanance check box under
attributes tab
utilities-table maintanance Generator->
create function group and assign it under
function group input box.
also assign authorization group default &NC& .
select standard recording routine radio in table
table mainitainence generator to move table
contents to quality and production by assigning
it to request.
select maintaience type as single step.
maintainence screen as system generated numbers
this dialog box appears when you click on create
button
save and activate table
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
please check the link for getting information about table maintenance generator !
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=use%20of%20table%20maintenance%20generator&cat=sdn_all
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Regards,
Priyanka. -
Reg :-maintain a table maintenance view for the z table.suggest me the code
i have question.i have created a z table related to pp module.the requirement is to maintain {table maintenance view} for this z table.how could this be done.can any one suggest me the code for this?
Hi ,
We have a lots of queries on table maintainance creation in the forum posted and replied to.Pls have a look at it first.
In se11 -> change mode of the ztable -> goto -> utilities -> table maintainance generator -> click on it...
it will give a new screen-> enter the required details like function group , authorisation(use &NC& or leave it blank if you dont know) and screens
2 step and 1 step means=> number of screens displayed in maintainace
if step1 is selected then we have a screen which will be like a table control for data entry.........
for step2 we have a table control screen and a more detailed individual field display as second screen
click on the button 'find screen numbers' so that system automatically proposes the screen numbers
after which click on the "create" button and follow the required instructions/messages
once done go to SM30 enter the table name to check if maintainance has been created properly
Hope it helps,Pls check and revert
Regards
Byju -
Creating 2 table maintainance views for one custom table
Hello All,
I want to create 2 table maintainace views for one custom table.
I know how to create table maintainace but I want to know whether we can create only one maintainance view or we cal also create 2 maintainace views for a single custom table.
Regards
MaheshHello,
You can create as many maintenance views one one table as you want.
Kind regards,
Bart -
Matching data for two internal Table
hi guru's,
i have two internal table that is ITAB and itab1, and both has more than 2000 records, but MATNR is common field in both, so i want to update itab from itab1 according to matnr. can anyone please help me? actually i was using read table but it was not doing correct.
regards Nitin.dear all,
thanx for reply again...but still same problem. actually i m making a report for material price comparison
purchased in current month and same material if purchased in before months. so i need maintain the final ITAB with including same material if purchased in previus months.
ITAB1 : EBELN BLDAT MATNR WRBTR
100023 20080101 abcd 100.00
100025 20080106 xyzr 250.00
100028 20080102 abcd 100.00
100129 20080117 xyzr 150.00
100159 20080126 uvwx 170.00
ITAB2 : EBELN BLDAT1 MATNR WRBTR1
200026 20080201 abcd 105.00
200024 20080206 xyz_r4 250.00
200023 20080201 abcd 100.00
200129 20080217 xyzrw 150.00
200152 20080225 uvwx 190.00
Final record which i need.
ITAB3: EBELN BLDAT MATNR WRBTR WRBTR1
100023 20080101 abcd 100.00 105.00
100023 20080101 abcd 100.00 105.00
100159 20080126 uvwx 170.00 190.00
please suggest me accordingly...
regards nitin. -
"Select" Physical table as LTS for a Fact table
Hi,
I am very new to OBIEE, still in the learning phase.
Scenario 1:
I have a "Select" Physical table which is joined (inner join) to a Fact table in the Physical layer. I have other dimensions joined to this fact table.
In BMM, I created a logical table for the fact table with 2 Logical Table Sources (the fact table & the select physical table). No errors in the consistency check.
When I create an analysis with columns from the fact table and the select table, I don't see any data for the select table column.
Scenario 2:
In this scenario, I created an inner join between "Select" physical table and a Dimension table instead of the Fact table.
In BMM, I created a logical table for the dimension table with 2 Logical Table Sources (the dimension table & the select physical table). No errors in the consistency check.
When I create an analysis with columns from the dimension table and the select table, I see data for all the columns.
What am I missing here? Why is it not working in first scenario?
Any help is greatly appreciated.
Thanks,
SPHi,
If I understand your description correctly, then your materialized view skips some dimensions (infrequent ones). However, when you reference these skipped dimensions in filters, the queries are hitting the materialized view and failing as these values do not exist. In this case, you could resolve it as follows
1. Create dimensional hierarchies for all dimensions.
2. In the fact table's logical sources set the content tabs properly. (Yes, I think this is it).
When you skipped some dimensions, the grain of the new fact source (the materialized view in this case) is changed. For example:
Say a fact is available with the keys for Product, Customer, Promotion dimensions. The grain for this is Product * Customer * Promotion
Say another fact is available with the keys for Product, Customer. The grain for this is Product * Customer (In fact, I would say it is Product * Customer * Promotion Total).
So in the second case, the grain of the table is changed. So setting appropriate content levels for these sources would automatically switch the sources.
So, I request you to try these settings and let me know if it works.
Thank you,
Dhar -
Status control table - 'Perform update for status control table for cube '
Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjunHi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap -
Setup event table cache clear for - Essbase cube table
we have event polling table for clearing the cache now having issues in setting up for essbase physical cube tables.
1. we have structure of hyperion like this for physical cube table "CONSOL"- where schema is empty.
"Hyperion"."CONSOLX".."CONSOL"
2. Event polling table is in different database/connection
When the event table is populated without schema, polling actually looking for the table in the database configured for the event pool connection pool and not "hyperion".
*[55001] The physical table Hyperion:CONSOLX:Event Polling:CONSOL in a cache polled row does not exist.*
When i read in some blogs...I understood its working as expected(when something is null it looks in event polling database)
Has anybody configured event polling for hyperion cubes table cache clear ?
Thanks
Ayapswhat is your insert statement in UET table?
Looks like you are missing one value out of 4 required. Thats why it is considering Event Pooling in between. As you have event pooling table in different physical database, you have to fill DbName,CatalogName,SchemaName and TableName in the UET tables. -
How can I use create/createInsert for two different tables
Hi All,
I am showing different fields in the UI from different tables. I am able to fetch the data from all the tables and able to modify and save the data.
Now, the problem when I want to create/insert some data into those columns(from different tables) I am facing issues.
How can I proceed further??Hi Shay,
Thank you very much for your quick response.
Actually I am totally new in ADF world and I am trying to implement some applications in ADF.
I created an UI based on some 3 tables(there is foreign key relation between them) and some other tables. I am able to modify and save my application if there is any data in all the tables.
My Actual issues are
1) I removed all the data from the tables. There is a submit(CreateInsert) button, what I expected is on click of the button I should see all the fields in editable mode. But I was able to see only few fields and also in readonly mode. So here my issue is how can i create and save these data.
2) Consider on my landing page I have just CommandLink/CommandButton. After clicking that page I should get the above screen in create mode(I mean to say all fields in editable mode). How can achieve this?
Thanks & Regards,
Ravi. -
Table maintenance generator for a custom table
Hi All,
I have a requirement.
I had created a custom table with 5 fields with partner_id as the key field.
I had generated the table maintenance for this.
But, when i maintain via sm30, the maintenance screen should display 7 fields, i.e
for the partnerid, the firstname and the lastname has to be display as the second and third column.
So, in the maintnenace screen sm30, i should have 7 fields display... but actually in real custom table, there will be only five fields (except firstname and lastname of partner).
Please guide me how to do this development.
Do i need to change the code generated via table maintenance and add these two fields in the table control and code to retreive the values for the firstname and lastname.
Please help me.
Thanks,
Jaffer ali.Sit is not a wise idea to add your custom fields in standard sap table maintenance generator screens..
each time you do a re - generate, (in case you added a new field in the table, or changed a data element, ) you will have to regenerate your tabe maintenance generator, and you will lose your code...
in this case, it will be better to create a custom screen with these fields and write code to populate the table..
or to make it easy, create a maintenance view with all fields required, -
How to know how many child tables are present for a parent table
hi all,
i created a table USERS in db user pavan (pavan.users (id primary key) ).
and child tables are may be in the same user pavan or in other users of database also.
for the other users i given relative grant permissions to access this USERS table and maintain relation to it.
now, my requirement is how to check the number of references to pavan.users.id
how many tables are dependent on it.
thanks in advance.
regards
pavanTry this
select a.owner,
a.constraint_name,
a.column_name,
a.table_name,
c.table_name Referenced_table,
d.column_name referenced_column
from
all_cons_columns a,
all_constraints b,
all_constraints c,
all_cons_columns d
where a.table_name=b.table_name
and a.constraint_name=b.constraint_name
and b.constraint_type='R'
and b.r_constraint_name=c.constraint_name
and c.constraint_name=d.constraint_name
and a.owner='PAVAN'
and c.table_name='USERS'
and d.column_name='ID' -
Get Table fields name for an SAP table
hi,
i need to pass SAP table name as a parameter to the selection screen of a Report program.
This prog shud give me the table Fields name along with type and length.
Is there any standard SAP report program for the same or i have to write my own logic?
Please advise.
regards,
ags.Hi,
For your requirement you have to write own program in dynamic manner by using field symbol concept.
Use this FM DDIF_FIELDINFO_GET and get the field information of database table.
call function 'DDIF_FIELDINFO_GET'
exporting
tabname = <master> u201C Table name
Tables
DFIES_TAB = <table_field> u201C here you will get field information of table
exceptions
not_found = 1
internal_error = 2
others = 3.
if sy-subrc <> 0.
message text-005 type 'E' .
endif.
Loop <table_field> assignigng <field>
*---here you have to collect the relevant information that you are going to display in your output.
Endloop.
Use any one of ALV or OOALV and display your records.
Regards,
Peranandam -
Table control program for updating database table
Does anybody have a sample code for a table control program which can insert/delete/update a database table?
I mean like on the output on table control, if the user insert/delete/update the records, the corresponding records will be updated in database table also.
Appreciate your input.
Thanks.hi nuren,
TABLES: kna1,knbk.
DATA: v_kunnr LIKE kna1-kunnr.
DATA: v_check TYPE c.
DATA: BEGIN OF it_knbk OCCURS 0,
banks LIKE knbk-banks,
bankl LIKE knbk-bankl,
bankn LIKE knbk-bankn,
bkont LIKE knbk-bkont,
koinh LIKE knbk-koinh,
chk TYPE c,
END OF it_knbk.
DATA: v_ucomm TYPE sy-ucomm,
v_dynnr TYPE sy-dynnr.
DATA: l_index TYPE sy-index.
data: count type i.
CONTROLS: tc1 TYPE TABLEVIEW USING SCREEN 0200.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ABC'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
v_ucomm = sy-ucomm.
CASE v_ucomm.
WHEN 'DISP' OR 'CHNG'.
IF v_kunnr <> space.
SELECT banks
bankl
bankn
bkont
koinh
FROM knbk
INTO TABLE it_knbk
WHERE kunnr = v_kunnr.
LEAVE TO SCREEN '0200'.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module MOD_KUNNR INPUT
text
MODULE mod_kunnr INPUT.
IF NOT v_kunnr IS INITIAL.
SELECT SINGLE
kunnr
FROM kna1
INTO v_kunnr
WHERE kunnr = v_kunnr.
IF sy-subrc <> 0.
MESSAGE e000(zz) WITH 'INCORRECT CUSTOMER NUMBER'.
ENDIF.
ENDIF.
IF v_kunnr IS INITIAL.
MESSAGE e000(zz) WITH 'PLEASE ENTER A VALUE'.
ENDIF.
ENDMODULE. " MOD_KUNNR INPUT
*& Module STATUS_0200 OUTPUT
text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'ABC1'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module SCREENMOD OUTPUT
text
MODULE screenmod OUTPUT.
IF v_ucomm = 'DISP'.
LOOP AT SCREEN.
screen-input = 0.
MODIFY SCREEN.
ENDLOOP.
ELSE."if v_UCOMM = 'CHNG'.
LOOP AT SCREEN.
IF screen-group1 = 'G1'.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
endif.
if sy-ucomm = 'INSE'.
loop at screen.
IF ( tc1-current_line <> tc1-lines ).
screen-input = 0.
else.
screen-input = 1.
modify screen.
endif.
endloop.
endif.
ENDMODULE. " SCREENMOD OUTPUT
*& Module EXIT2 INPUT
text
MODULE exit2 INPUT.
LEAVE TO SCREEN 0.
ENDMODULE. " EXIT2 INPUT
*& Module modify INPUT
text
MODULE modify INPUT.
IF v_check = 'X'.
it_knbk-chk = 'X'.
MODIFY it_knbk index tc1-current_line.
ELSE.
CLEAR it_knbk-chk .
ENDIF.
ENDMODULE. " modify INPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE user_command_0200 INPUT.
v_ucomm = sy-ucomm.
CASE v_ucomm.
WHEN 'DELE'.
DELETE it_knbk where chk eq 'X'.
DESCRIBE TABLE it_knbk LINES tc1-lines.
WHEN 'INSE'.
CLEAR it_knbk.
APPEND it_knbk.
DESCRIBE TABLE it_knbk LINES tc1-lines.
WHEN 'LIST'.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN '0200'.
WRITE 'Report'.
WHEN 'BACK'.
LEAVE TO SCREEN '0100'.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module validate INPUT
text
module validate input.
IF IT_KNBK IS INITIAL.
MESSAGE E000(ZZ) WITH 'A BLANK LINE CANNOT BE SAVED'.
ENDIF.
endmodule. " validate INPUT -
Two table maintenance generator for one table
Can we created two table maintenance generator for one ztable. if yes then what will be the steps.
Hi Prem,
Why you need two table maintenance generator for a single table?
We can generate only single table maintenance generator for a single table.
you can add modification event in inside table maintenance if you need anything to change or validate in insde your table maintenance generator.
Regards,
Prasenjit -
Lgical table from two physical table
Hi,
I am trying to design a logical fact table from two physical table. One table has transaction data and another has accounting data. The requirement is, I need to merge the rows between these two tables, where were it matches. If the keys are not matching between these two table then also I need to bring those rows from both tables as separate rows. How can i do this? Also can i have a logical table as source for my fact table.You'll need outer joins in your physical layer and you can drag the columns from both physical tables to a single logical table and you will see in the BMM layer it will create the two logical table sources.
Maybe you are looking for
-
Scanning with Yosemite splits multi-page documents into a separate document for each page
I use a Mac Book w/ OSX 10.10.1. I scan docs using the HP Scan utility & both an HP OfficeJet 6700 & an HP Officejet 8600. Everything worked great for a year or more. In about September, 2014, multi-page docs started creating a separate file for eac
-
Besides this script should I start or invoke any other script to make the Apps fully functional. adstrtal.sh Do I need to start startJServ.sh or any other scripts under Apache to start the Oracle Application Server as well? Any help would be apprecia
-
Using iphoto 6 (importing from cd)
I have installed iphoto 6 and all seemed OK. When I imported some old photos from a cd I had made some time ago (sometime last year) I found that I had 2 copies and in one case 3 copies of the same picture and it appears that the only difference is t
-
When install XP in KT4M, I have copy problem when XP copy file to HDD, and I got the Hardware/Hard driver problem at the end. MSI-KT4M (VIA KT400) 256MB DDR266 nVidia Ti4200 8x Maxtor UDMA133 40GB (D740L) AMD XP 2400+ I also try to install the XP in
-
PAX Tactic3D Alpha V1.00
PAX Tactic3D Alpha V.00 Creative all rights be long to Creative and logos. Creative giving me there writing persimmon by Robert McClelland. PAX related logos and software and drivers are own by PAX - Please don't remod my work with out permission you