Separate videos

can i organize my videos better on the ipod, like in a folder like i do my music.
example ( once im in the video section i would like to be able to see folders or playlists of lets say family videos, tv shows, music videos and so forth.
if i can please explain thank you

Yep. it works same way as it did with music. when creating the playlist identify videos by select file by: Kind and selecting Video. add whatever other criteria you want and you'll have a playlist.

Similar Messages

How do I move a downloaded file (from YouTube) to GarageBand so as to separate video from audio, then send audio to iTunes?

How do I move a downloaded file (from You Tube) to Garagband - so as to separate video from audio (which I will send to iTunes)

Create a new GarageBand "Movie" project, then import your movie into GarageBand, by dragging it from the "Movies" tab of the Media Browser into the Timeline. GarageBand will split the movie into a video channel and an audio channel. Delete the video/movie channel and use the "Share" menu to send the audio channel to iTunes (assuming you have iLife '11 GarageBand)
Regards
Léonie

Time code finder to auto sync separate video and audio

Hi All,
Trying to see if FCP has a tool that would allow me to type in the time code from my digital slate to instantly sync separate video & audio. Shot a low budget feature on a RED and digitally recorded audio. We did setup the RED to get reference audio but now I need to sync each scene and take up to the primo audio.
As far as I know, FCP doesn't have any such option but I hope someone proves me wrong.
~reicko

This is kind of off the top of my head, since I usually sync using the "dumb" part of the slate, but here's a workflow I'd try. I'm assuming here that the timecode from your digital slate matches the audio timecode.
1. Select an audio clip in the bin. Choose from the menu Modify/Timecode...
2. Copy the Source TC value into the Aux TC 1 row. You might have to turn on some checkboxes on the left side. Make sure the format and the rate are the same for both.
3. Open the video clip in the viewer and find a frame where you can see the smart slate clearly.
4. Select Modify/Timecode... and enter the timecode value you see in that frame in the Aux TC 1 row. Again, be sure you're using the right format and rate.
5. Select the two audio and video clips that you want to sync. Choose Modify/Merge Clips... and synchronize using Aux Timecode 1.
You should then have a new merged clip with the audio and video in sync. The scratch audio that came with the video file will be there too, so pay attention to your audio patching and be careful about which tracks you actually cut into the timeline.
I can't say for sure if this is faster than just marking inpoints at the clap on each clip. Typing in all that timecode could be hazardous to one's health.

Batch processing audio for separate video clips?

Hi there, new to the forums. I have roughly 100 separate video clips that either I have edited and exported out of PPro or collected from other outside sources. The video clips were recorded in a wide range of environments, producing widely varied audio levels and sound quality. The videos are for a blog.
I am hoping to create a batch process preset in Premiere Pro or Audition to normalize the audio in all of the video clips. My goal is to have the audio play back at the same volume level in all of them without having to edit the audio individually in each clip. I have been searching the forums for a while for help with a batch process solution like this. Running CS6 so have full access to all Adobe apps.
I have played around with running the clip audio through batch processing in Adobe Audition CS6. Haven't had any success thus far -- the audio doesn't save within the same video file it was pulled into Audition from. I really would like to normalize the audio without having to re-import/-re-export each separate video.
PPro group might be the wrong place to start, but figured I would start here. Is there a missing manual out there for doing something that seems relatively simple?

Premiere Pro can't do this. If Audition can't either, then you're probably stuck doing it manually. Or at least, using non-Adobe software. Possibly VirtualDub, depending on your source media.

Applying effects to multiple clips or an entire sequence on a separate video track

I'm looking for an easy way to apply effects on a separate video track. In AVID I would just drag and drop the effect preset onto a blank layer. Or if I wanted the clip to affect just a few clips, I would add two edits (similar to razor blade) on a separate video track and drag the effect preset between those edit points. Is there a way to do this in Premiere Pro? Running CS 5.0.4. Thanks for the help!

Well, depending on what you want to do, you might actually be able to use a clip instance of one sort or another.
One option is Transparent Video (File > New > Transparent Video); by itself, Trans. Video doesn't do anything, but some effects can be applied to it and will generate an output. This doesn't work with all effects, so you'll have to experiment. Check here for more: Create a transparent video clip
Another option would be to use a Color Matte (File > New > Color Matte) or Black Video (File > New > Black Video) clip. These do have an effect by themselves, so you could apply any effect you wanted to them, and then possibly use a Blending Mode to apply it. Black Video is common for this purpose, with something like the Add mode. Again, not perfect, but it will depend on the effect you're trying to achieve.
Unfortunately, we don't have anything like AE's adjustment layers in Premiere Pro. That would solve your problem, quickly.

Do i need separate videos to enable a user to 'Play All' (From start to end) and select certain sequences (e.g. Ceremony, Reception Speeches that start at the chosen sequence and end at the end of the rest of the video and not the sequence)?

Hi - I am obviously new to Encore but this is what I want to do.
In a wedding video I want them to be able to:
1. Play the movie from start to finish.
2. Select a sequence (say Speeches) that plays from the start of the sequence until the END of the whole video.
So do I need 1 video for the play all one, as well as the 4 sequences - Reception, Cake, Speeches, Dancing?
Colin

You can use separate videos, or a single video. The single video is easier for your desired navigation. You will find more people asking how to get the "chapter" or scene video to back to a menu when it ends, and also have a play all. So ignore the advice on those.
Single video:
Your single video goes on one Encore timeline. "Play all" is a button to the timeline, and the timeline has an end action of "last menu."
Chapter menu has 4 buttons (plus a fifth to go back to the main menu), going to each respective chapter marker. There are no end actions on the chapter markers, so when another chapter is reached, it keeps playing through just like the play all.
Multiple videos:
Each video goes on its own timeline. The end action of video one timeline is video two timeline etc. Play all is a button that goes to timeline one. The chapter menu also has a button going to chapter one, and it works the same as the play all. Each of the chapter buttons go to their respective chapter timelines.
Encore can have some issues with lags, but I don't think they affect either of these workflows. Do not rely on the Encore preview; burn a test disk and play on a DVD player.

Upgrade RAM or Separate Video Card

I'm looking to buy a 21.5" iMac. I do some photo editing with photoshop elements and iphoto. I also use iMovie but don't do intense graphics or video work.
So I have two considerations:
1. Should I purchase the iMac with a separate NVIDIA graphics card?
2. Should I upgrade to 16GB of RAM
Doing both would be a bit too expensive so I need to know if the base model will likely be fine for me or if I should consider upgrading the ram or video card.
Thoughts?

Can I ask what you determine the difference to be between professional use and home movie use? I once made a home movie that was over an hour long.
Basically I would like to purchase a new 15" MacBook Pro and am wondering if I should get the more expensive one with the Nvidia Graphics Card or without. I like to do a lot of video editing on iMovie and have thousands and thousands of photos on iPhoto that I like to edit.
Do I need the Nvidia graphics card or should I get the standard 15" model and up the memory/processor/hard drive?
Thank you!

Separate video from music

Updated to IOS 8 podcast app.
Problem 1: Still cannot separate synced podcast on the device vs podcasts in the cloud when using stations.
            Say that I make a great station. The app includes podcasts not on device and needs to be download.
           The app stops playing and all I hear is silence while the podcasts gets downloaded slowly. Bad user experience!
           There should be away to play exclude podcasts that have not been downloaded.
Problem 2. Podcast app no longer understands the following smart playlist categories when syncing from itunes:
               Kind
               Composer
                Group
               Category
               Comments
               etc...
i use those categories to separate out video and music podcasts.
I want a playlist of only music and a playlist of only video. I don't want interruptions and wait for podcasts to be downloaded when it is already on the device.
In IOS 7 and previous, I have "Kind contains video" in the smart playlist to separate out video from music.
Now the Podcasts app sends that playlist to the music app. Because the smart playlist says also includes "Media kind is podcasts", the music app does not have anything in the playlist.
I created a video only station. But due to problem 1, it was a bad user experience.
I have the following in the smart playlist:
Match all
Media kind is podcasts
Kind contains video
Plays = 0

In iTunes, right click on a movie (or video), select "get info" then select "video" and choose the correct category from the "video kind" box. Then click "ok".
When you've done this for all the videos/movies that are labelled wrongly, re-sync the iPod to reflect the changes.

Losing audio when merging separate video & audio tracks. (fcp 5.14)

I am merging separate audio and video tracks. When I go to Modify >Merge, the resultant merged clip is missing the last 25% of the audio track. So it plays correctly and is synched correctly, but the audio just disappears 75% into the video. This shouldn't be the case as the audio takes are all longer than the video takes.
When I pull the audio track into the sequence and sync it up to the video track in the sequence editor, it plays fine. I'm not sure what could be causing this problem, as it has only cropped recently. I've had no problems merging clips by using Modify > Merge before. I tried changing the audio from 44.1 khz to 48.0 khz and back again, but i run into the same problem in both.

Try this ridiculous workaround. I don't know why it works this way.
These "---" are the extra steps.
To get a good merged subclip.
Open the audio file and add the 'in point' to the slate.
---Drag audio clip to the timeline.
---Drag the audio clip from the timeline to the browser window.
Merge with video.
Viola. Audio won't drop out. But the waveforms are completely off with the sound.
Next step is to open the merged clips and Make Subclip so you don't have that extra media in the beginning and end. And the waveform seem normal.

Keynote insists on separate video from audio on exporting.

Hi, friends.
I've searched a while this forum and I found a couple of friends sharing my problem but neither of them have received a sound solution. I'm trying to export a keynote presentation to QT, high res, mixed audio, autoplay. However, every time I export the presentation, no matter what options I choose, Keynote insists on separate audio from video into two mov files. Is this a Keynote normal behavior? If so, how am I supposed to mix both files and which App can help me to do that. QTPlayer has no options to the user to mix video and audio and this is an extra task that Keynote should address from the export function, right?
Thank you in advance for your help.

Ok. I spent some hours more on this problem and the only option that mixes both video and audio in one mov file when exporting to QT movie is this:
Sorry for pasting and Spanish version, it's the only I use.
I was avoiding the option "Fixed Time" (Tiempos Fijos) from the beginning of my tests because its name is misleading: it states that all compositions will last the same fixed length of time; worse yet, every slide will last also the same fixed length of time that you specify in the text boxes. I don't want standardized intervals between compositions because that would ruin my work; my presentation has different intervals between slides and among compositions for the viewer to have time to read the slides.
After reading the Keynote PDF manual, I learned that such option doesn't apply to EVERY slide or composition, BUT only to those ones which are set to "after mouse click" to transit to the next slide, whereas the slides which are set to a length of seconds after what to transit to the next slide, are honored.
So, I used "Fixes Times" option to export my presentation and both video and audio where mixed in the same mov file. I must assume, then, that separating video from audio is a normal Keynote behavior, except when "Fixes Times" option is set.
I hope this can help to someone.

Combining Separate Video and Audio tracks

Hi, what's the best way to combine a video and audio tracks into a single file? We will be given the video and audio from 13 volleyball games, and each game will be coming as a file.mpg (mpeg2) video and an mp3 file.
We're looking for a way to either manually bring it in, or bulk automate a way of combining the two tracks for each game to have one file that is in a format that doesn't need to be rendered in FCP.
Thanks!

Seems like there should be some way to combine clips somewhere though? < </div>
Not if they're form separate devices or in different codecs. the MPEG2 files are the big problem, next time, have your people shoot conventional DV and use the audio interface to bring in a feed from your announce booth or radio station or whatever so it's in sync.
bogiesan

How can I combine two separate video projects onto one DVD with a common menu?

In PE 3 I have a finished video project and a separate slideshow that I want to include together on the same DVD with a common menu. I would like the slide show to be accessible from the main menu of the DVD, something like: "Play Movie" and "Play Slideshow". How do I do it?

You can download my free Steve's Tips article on DVD markers from the Muvipix.com products page.
http://muvipix.com/products.php?subcat_id=41
Http://muvipix.com is a great site for learning and mastering this program. Set up by a community of veterans from this site, it offers tutorials, tips, media and the world's most helpful forum. Many of the downloads are free with registration and, for a low annual subscription, you can have unlimited downloads from the ever-growing library of tutorials, articles, music, motion backgrounds, custom-created DVD menus and other media. If you really want to master this program, you ought to check it out!

Since installing the latest update, whenever I try to play purchased videos, they open in the separate video window and immediately causes iTunes to crash and close.

Ever since installing the latest iTunes 10.4 update, I've been having trouble playing purchsased videos. When I try to play them, they open in an unseen new window and after a couple of seconds of audio, iTunes crashes and has to close. There isn't something wrong with the videos as they play fine on my iPod and I have played most of them before, but they just won't play in iTunes suddenly.
Can anyone help?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

How can I do a separate video in and out on my 21.5" iMac, and only have 1 thunderbolt port?

The set up that I have is one 21.5" iMac using the thunderbolt port I am sending a feed to a projector and a couple monitors for our worship service (To display the lyrics). Now I am ready for video broadcasting online, I have a camcorder connected to a Blackmagic Design Intensity Extreme which has a thunderbolt port to connect to my iMac. But I have a problem, the 21.5" iMac only has one thunderbolt port and it's already in use (For the worship service lyrics). Is there any way to receive the HD video feed from the camcorder/Blackmagic set up into the FireWire port? Or use the thunderbolt for the camcorder set up and use the FireWire port to send the video feed for the worship service?

Hello all those who took the time to help me with my problem. Thank you all. Yes I do have the option of sending it back to my camera I have found again since I went into iMovie.
My problem was I did the slide show in Iphoto because I wanted to use the Burns effect and the only option was to put it into iDVD (not iMovie) from there.
By putting the shots in iMovie I can send it back to my camera BUT cannot use the Burns effect so I am left with the black side on each side of the picture in the postcard. Guess you can't have everything.
THanks again you have all been very patient and helpful.
Stella
P.S.
re: It's in iMovie HD 7 that the Share menu appeared. .......No, it's in 6.0.3 on mine but only in iMovie not in the iDVD where I was trying to work.

Two separate videos in the same frame, and large format video.

Hello.
I'm very new to this program.
I've only done basic editing, such as this video where I took scenes from 3 different computer game replays and spliced them together.
I own an eyefinity system (triple monitor) and record replays from games.
The replays are half-size, but still 3008x600 pixels. Here's a sample of one reduced to fit in a 1920 pixel width.
I want to get two of these in to one 16:10 or 16:9 frame.
So two questions:
1. Each time I try importing these avi's in to my Premier Project, they get cropped. The largest i've been able to make the sequence is 1280x1080. (sequence preset "DVCPROHD")
I assume i'm missing something obvious...or there's a limitation of how many pixels wide Premier can deal with. If it's a width issue...I can resize the avi's first. Although I haven't seen a way to resize in Media Encoder without the upper and lower black bars...which I believe will create a problem. (see "Here's a sample" video above)
2. I want to put two of these long rectangular replays in the same frame. Not overlapping, but one at the top of the frame...and the other at the bottom. Is this possible?
The only thing I could find that came close was "multi-camera monitor". I was unable to figure that out. Is that what I have to learn about...in order to do this?
Thanks very much.

How do I choose the right sequence settings?
Picture-in-picture (PIP) and split screen
Multi-camera sequences are for real time switching between different sources.
Multi‑camera sequences

Is there a way to separate video and audio?

I'm new to iMovie 08 because I've always used FCP. But for this particular project I'm working on, I think FCP would be overkill and I've always wanted to try iMovie anyway. So I'm use to having two different timelines for the audio and the video. iMovie only gives me one for both. Is there a way to unlink the audio and video channels? I would have thought this concept would be pretty universal for all video editors. What if you want to drop an insert clip over the audio or unsync the audio and video altogether?

Scroll down here: http://www.apple.com/ilife/tutorials/#imovie ..to "Advanced Techniques" at lower-left, in particular "Working with Audio Clips" and "Working with Background Audio"..
..all you need to know is there in the Tutorials..

Separate videos

Similar Messages

Maybe you are looking for