SeparatingApplication Server from Central Services

Hi gurus, we need to move our application servers from AIX to Linux and we have NW 7.11, right now our Central Services are in the same instance and server than the first application server, and we need to separate them.
I think we can install another application server point it to existing central servicies and everything will work ok, but I can not figure it out how I can switch off the original application server that is with central services.
I don't know if I can comment start profile line related to dw process and that's all or there is something I'm missing.
Does anybody face this situation before, what do you think?
regards

Dear Effan, we agreed that for PRD where we have a distributed installation and we won't have any problem.
For QAS ad DEV where we have CI (ASCS+DI); we can install additional application servers on Linux.
After we install those application servers, we need to deinstall our original application server on AIX. This appl srv is part of the CI (same system number for ASCS and DI). So we can not deinstall ir, ok?
So, if we can not deinstall appl server, maybe we can avoid to start it up just commenting this section in startup profile
Start application server
DW = dw.sap$(SAPSYSTEMNAME)$(INSTANCE_NAME)
Execute_09 = local rm -f $(_DW)
Execute_10 = local ln -s -f $(DIR_EXECUTABLE)/disp+work$(FT_EXE) $(_DW)
Start_Program_02 = local $(_DW) pf=$(_PF)
this will avoid to launch disp+work process.
Am I right?

Similar Messages

A client is trying to write pdfs to a remote server from Central

A client is trying to write pdfs to a remote server from Central, they can send a dat files from the remote server to Central and they can copy files from the Central Server in Windows Explorer and from a Command prompt, the folder is set to users everyone, read, write, etc. Central gives the cannot find output device in log. Central is installed with a local user ID and local host. Any ideas I am not finding anything on this on devnet forums I am going to check JetForm Alumni next. Thanks. I think it has something to do with the Central account and password but I don't know what to do.

It sounds like the account used to run Central does not have rights to access that remote server/directory.
Try changing the Central user account to use a more privileged account - normally a network account would be used to allow access to all resources across the enterprise - printers and file shares.

How do I remove previous configuration of Essbase Server from Shared Services?

Hi All,
I'm trying to reinstall Essbase Server (on a new server; we've upgraded the Essbase Server hardware) and reload data but the current install believes I've already configured it despite removing EssbaseCluster-1 from Shared Services Application Groups. Is there something else I have to do to get the new install of Essbase Server configured as a new Essbase instance?
Thanks,
Ryan

I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
An error occured during the operation. Detailed Message is - reg.properties notconfigured.

Unable access the server from administration services

Hi Experts,
Can any one please help on the following issue:
I have installed the 9.3.1.3 Hyperion administration services on my PC and when I tried to connect to the server I am getting the following error message:
Could not connect to administration server, client and server are different versions
Server version is 9.3.1 and client version is 9.3.1.3.
I tried to download the 9.3.1 administration services from www.edelivery.oracle.com but I couldn't find the 9.3.1 version.
Are there any other sites available to download the 9.3.1 administration services.
Also, Can we able to connect to the Linux Essbase server from Windows administration services?
Thanks in Advance,
Ram

Atul:
Are you connecting to the essbase at remorte server location?
Looks like Essbase a the C-NOIA131 is not started or not accepting connection request?
check wheather it is started?
if it is started; use IP Address and connect, sometimes server name might not work if DNS at u r network is down or not Defined properly?
I would do a Telnet from the box in which i am trying to fire the connection and connect to the port 1423 which essbase uses to see if u have any firewall issues
This might be a problem where essbase is not started..in my experience.. let me know u r findings...
Thanks,
Sriram

Cannot Add Essbase Server From Admin Services Consol

Hi
I am trying to add a new essbase server to my Admin Services list. I get the following error message:
Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
Can anyone please help me to figure out what exactly is going wrong ?
Thanks
Mandar Joshi

Review the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
For default configurations ensure any firewall has the below ports opened from the client to the server:
TCP/1423
TCP/32768 through TCP/33768
Regards,
John

Error reading job logs of Apps server from Central Instance

Dear Gurus,
We have newly installed system with one CI ( cluster environment) and 2 application Instances.
Systems are recently installed by other team. I am looking into support part after handover.
We have noticed below error while reading failed background job logs from our CI. If suppose any job is failing, we can read respective job log from that application instance but it throws error while reading job log from CI to either of application instance.
I checked /sapmnt/SID/global is shared among all 3 servers and i am successfully able to "Touch a" from applications instances.
Even though i have given "777" permissions to all folders like /sapmnt/SID , /sapmnt/SID/global , /sapmnt/SID/global/400JOB*
I am not able to read job log from CI , for same failed job I can read job log from respective application instance.
Error log :
Error reading job log JOBLGX00080700X39290
Message no. BT167
Diagnosis
The background processing system was unable to read the job log named in the message.
This message suggests that there is a problem with the TEMSE storage system of the SAP system. The TEMSE storage system is a repository for temporary objects, such as job logs and spool requests. Job logs are always stored in the TEMSE as operating system files.
This error occurs if the TEMSE system is not able to find or access the file that contains the text of the job log that you requested. Possible causes for the loss or unavailability of the job log include the following:
Someone deleted the required TEMSE file (from the operating system, not from within the SAP system).
A CRON (or equivalent scheduler) job has deleted the TEMSE file.
The file system in which the TEMSE stores its files is not mounted or is not accessible (NFS problem, disk failure, or similar problem).
The TEMSE reorganize or consistency check functions were used within the SAP system and deleted the job log.
SM21 logs :
Error 2 for write/read access to a file. File = /usr/sap/SID/SYS/global
BP_JOBLOG_SHOW: Failed to display jobs. Reason:
> Error reading job log JOBLGX00080700X39290
Strange this is I can check failed job log on one application instance frfom other application instance but not from CI.
Kindly throw some lights where to check.
Regards,

Hi Shravan,
I guess it is related to permission to /sapmnt/SID/global folder. Please ensure owner is sidadm:sapsys in all the systems viz CI, App servers etc.
Check the mounting options are correctly set with read/write mode.
Hope this helps.
Regards,
Deepak Kori

Removing Database Server from Farm

In my Servers in Farm I have
SHAREPOINT_DB Microsoft SharePoint Foundation Database
SQLCL-SPOINT Microsoft Sharepoint Foundation Database
SHAREPOINT_DB - is the alias configured on all the wfe's to point to the actual database server which used to be
SQLCL-SPOINT\SHAREPOINT. We have recently migrated all the databases off of db server to a different VM SQL-SPDBP and updated all the cliconfg to point to the new server. I am not really sure WHY SLQCL-SPOINT is showing up as a database
server. All of the service applications with the exception of Usage app use the sharepoint_db alias. The Usage app is the only one that has the sqlcl-spoint/sharepoint hardcoded in the config. I will be using powershell to update that pointer
shortly. That being said .. could that cause SQLCL-SPOINT to show up in servers in farm? Is there a way to verify nothing else is looking at that server before I remove server from Central Admin?
Thank you for any replies!

If you have any database configured to use a specific SQL Server/instance/alias, that will show up in Servers in Farm.
You can verify what is being used by running:
Get-SPDatabase | Select Name,Server
If the SQL Server doesn't show up there, it can be removed.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Starting oracle weblogic server as windows Service

hi dear friends,
i am working with oracle Weblogic server 10.3 and oracle Jdeveloper 11g
i have an Ear file and deployed it on weblogic server and that work truly
now,i want to start my server with windows Services
for this goal i read some of the documents and created a windows service for my server
when i started windows Service of the server just console of weblogic is start
when i used debug mode for checking errors
i saw bottom errors:
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
>
<Jul 26, 2009 9:09:32 AM IRDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\NEWORA~1\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<Jul 26, 2009 9:09:32 AM IRDT> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\NEWORA~1\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<Jul 26, 2009 9:09:33 AM IRDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 26, 2009 9:09:33 AM IRDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 26, 2009 9:09:34 AM IRDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'requestEar' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
Truncated. see log file for complete stacktrace
>
how do solve their?

hi
i used your recommendation and set %WL_HOME%\common\bin\*commEnv.cmd to my path
in this case when i am starting service of my server from windows Service console
and then checked Deployment Files on my server
i saw my EAR File could not start and it state was failed
when i started from weblogic console
it had error deploying time
that error was :
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was: Locale not recognized
how do i solve it
regards
aghaluie

Advertisement status differs from Central vs Primary

Hello gentlemen,
As you can see advertisement ID 200BB and 200BC differs from what I have in Primary site server vs. Central site server.
The correct value should be - Disabled (as you can see from Central server).
I have tried to perform preinst /syncchild <primary site code> but it will still not updated.
Any insight on which log file should I check for and how can I fix this issue is greatly appreciated!
My env: Configuration Manager SP2 w. R2, Windows Server 2008, SQL Server 2005 for both servers.
Thank you.
---Pat

I tried to run logman to query the server (from Central Server to the affected Primary Site server):
C:\>logman.exe /query /s TROUBLED-SERVER.TW.COMPANY.ORG
Data Collector Set Type Status
Error:
The RPC server is unavailable.
C:\>
What could be the issue?
(Sorry no PSS support as this option is not viable to me). Thanks!
---Pat

How can I make addons available for enterprise users by an central service and forbid the installation from any other sources

in the company I´m working for it´s not possible to install add-ons by the Users . That´s what I´m going to change.
We use Firefox ESR 17 and Window 7.
I want to make add-ons available for everybody by integrating an internal central service. That is possible by customizing the "extension.webservice.discoverURL" to the server I´m talking about. The Problem is that nobody should be able to install add-ons from any other source, for example addons.mozilla.org, local media,...
Do you have an idea, how this problem can be solved?
Maybe there is a possibility by using the lockPref "xpiinstall.enabled false" in conjunction with a whitelist defining my Server?

Does any of this or similar blogs by the same author help
*http://mike.kaply.com/2012/07/03/customizing-firefox-blocking-add-ons/
Although with many hacks there could be some sort of workaround that advanced users may employ when attempting to circumvent the measures, such as the ability to use Firefox in safe-mode and then install add-ons, or even run a browser from a memory stick.
You may well get a better answer on some other forum. This mozillazine forum deals with some coding issues, not sure but they may consider your sort of question on topic.
* http://forums.mozillazine.org/viewforum.php?f=25

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

How can I using tpcall from one service to another service in the same server

When I using tpforward between two services in one server, it's working ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?
thanks
george

"george" <[email protected]> wrote:
>
When I using tpforward between two services in one server, it's working
ok. However,
when I using tpcall from one service to another service, it's failed?
anybody can tell me why?Basically, tpcall:ing another service in the same server is a no-no, unless you
a) are running a multi-threaded server (requires TUXEDO 7 or newer + compilation
options) or
b) use tpacall() instead of tpcall() and specify the flag TPNOREPLY. This is probably
not what you want to accomplish, though.
The reason is that TUXEDO servers by default (and always in versions before 7)
are single-threaded. If service A and B both reside in server X, server X will
be busy taking care of the call to A. If A makes a call to B, the call will be
put on the queue to X, but X will not look at the queue until it is done with
A, which won't happen until B returns... deadlock!
You can play tricks with starting multiple instances of X, but in the end you
will always face a risk (something lika a race-condition) for a dead-lock.
Solution: Move service B to another server (usually quite easy) OR switch to multi-threading,
if that's possible. Just make sure all code your service calls is MT-safe as well...
thanks
georgeHope this helps you,
/Per

Windows Server Essentials Email Service Won't Start SharedServiceHost.exe Unhandled exception from operation

Gday Everyone,
Two weeks ago we installed a new Server 2012 R2 with the Essentials Experience role. It was fully patched at time of deployment. We enabled O365 integration and password sync was working fine last week. This morning I went to the Dash Board to add a new
user and after clicking the O365 tab all fields show "Not available".
The system event log shows
"The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)."
The application event log shows the following.
System.InvalidOperationException: Nullable object must have a value.
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<GetSubscriptions>b__37(Subscription sub)
   at System.Linq.Enumerable.WhereSelectEnumerableIterator`2.MoveNext()
   at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
   at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.<>c__DisplayClass32.<GetCompanyInfo>b__30(AccountSkuDetails s)
   at System.Linq.Enumerable.WhereSelectArrayIterator`2.MoveNext()
   at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
   at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source)
   at Microsoft.WindowsServerSolutions.O365Integration.BecWebServiceAdapter.GetCompanyInfo()
   at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementCore.QueryO365Information()
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.ProviderBase`1.InvokeOperation[TResult](String operationName, Func`1 func)
   at Microsoft.WindowsServerSolutions.O365Integration.O365ManagementProvider.InvokeOperationWrapperAsyncWithLocalAdminPrivilege[TResult](String operationName, Func`1 func)
   at SyncInvokeQueryO365Information(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker invokeMe, Object instance, Object[] inputs, Object[]& outputs)
Stack:
   at System.Environment.FailFast(System.String, System.Exception)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener._ScreenForExceptions(GeneralInvoker, System.Object, System.Object[], System.Object[] ByRef)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.ExceptionScreener.Invoke(System.Object, System.Object[], System.Object[] ByRef)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(System.ServiceModel.Dispatcher.MessageRpc ByRef)
   at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean)
   at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(System.ServiceModel.Channels.RequestContext, Boolean, System.ServiceModel.OperationContext)
   at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(System.ServiceModel.Channels.RequestContext, System.ServiceModel.OperationContext)
   at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(System.IAsyncResult)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.AsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]].Complete(Boolean, System.Func`1<TryReceiveResult<System.__Canon>>)
   at Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.CoalescingAsyncResult`1[[Microsoft.WindowsServerSolutions.Common.ProviderFramework.Internal.InputChannelRequeuer`1+TryReceiveResult[[System.__Canon, mscorlib, Version=4.0.0.0,
Culture=neutral, PublicKeyToken=b77a5c561934e089]], Sku, Version=6.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]._MyCallback(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.TransportDuplexSessionChannel+TryReceiveAsyncResult.OnReceive(System.IAsyncResult)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.SynchronizedMessageSource+ReceiveAsyncResult.OnReceiveComplete(System.Object)
   at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(System.Object)
   at System.Runtime.Fx+AsyncThunk.UnhandledExceptionFrame(System.IAsyncResult)
   at System.Net.LazyAsyncResult.Complete(IntPtr)
   at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32, Byte[], Int32, Int32, System.Net.AsyncProtocolRequest)
   at System.Net.Security.NegotiateStream.ReadCallback(System.Net.AsyncProtocolRequest)
   at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32)
   at System.Net.FixedSizeReader.ReadCallback(System.IAsyncResult)
   at System.Runtime.AsyncResult.Complete(Boolean)
   at System.ServiceModel.Channels.ConnectionStream+IOAsyncResult.OnAsyncIOComplete(System.Object)
   at System.ServiceModel.Channels.SocketConnection.OnReceiveAsync(System.Object, System.Net.Sockets.SocketAsyncEventArgs)
   at System.Net.Sockets.SocketAsyncEventArgs.FinishOperationSuccess(System.Net.Sockets.SocketError, Int32, System.Net.Sockets.SocketFlags)
   at System.Net.Sockets.SocketAsyncEventArgs.CompletionPortCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
   at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32, UInt32, System.Threading.NativeOverlapped*)
The only thing we did a few days ago was enable the Azure Backup integration. I am not sure if this broke the O365 integration as I didn't go back to the O365 tab in the dashboard after installing the Azure backup.
I have spent a considerable amount of time on google, however, majority of the posts talk about Update 1 which disables the password sync service. I have checked and all services are started with exception of Windows Server Essentials Email Service (WseEmailSvc).
The Azure Backup module is working fine and the registry location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Server\Productivity seems to hold the correct configuration information throughout the various keys.
I am at a loss as to how to proceed with this issue? I have checked but there are no pending updates and I have attempted a server reboot numerous times.
Would appreciate external input if you have seen this issue before or know where we can look to further establish what is going on.
Cheers,
Chiper

I have a similar if not identical situation - I'm currently migrating from WS2012 Essentials to WS2012 R2 Standard w/Essentials role installed. The 'wseemailsvc' service continues to fail over and over, and I am unable to manage O365 accounts from within
the Essentials dashboard on the R2 server.
System Event Log:
Error 7031 - The Windows Server Essentials Email Service service terminated unexpectedly ... [repeats twice]
Error 7034 - The Windows Server Essentials Email Service service terminated unexpectedly. It has done this 3 time(s)
Application Event Log:
Source: .NET Runtime
Date: 2015-04-20 08:27:28
Event ID: 1026
Task Category: None
Level: Error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21137</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>Application: SharedServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.UnauthorizedAccessException
Stack:
at System.DirectoryServices.Interop.UnsafeNativeMethods+IAds.SetInfo()
at System.DirectoryServices.DirectoryEntry.CommitChanges()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper+<>c__DisplayClass3.<SetLocalUserPrincipleName>b__1()
at Microsoft.WindowsServerSolutions.MailService.ActiveDirectoryHelper.InvokeOperationImpersonateWrapper(System.Action)
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.CleanUpMappingData(Microsoft.WindowsServerSolutions.O365Integration.O365User[])
at Microsoft.WindowsServerSolutions.O365Integration.UpdateO365IntegrationDataTask.Run()
at Microsoft.WindowsServerSolutions.O365Integration.BackgroundTask.TimerCallback(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.TimerQueueTimer.CallCallback()
at System.Threading.TimerQueueTimer.Fire()
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
</Data>
</EventData>
</Event>
This error is followed immediately by:
Source: Application Error
Date: 2015-04-20 08:27:28
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-20T14:27:28.000000000Z" />
<EventRecordID>21138</EventRecordID>
<Channel>Application</Channel>
<Computer>redacted</Computer>
<Security />
</System>
<EventData>
<Data>SharedServiceHost.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215ca62</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.3.9600.17415</Data>
<Data>54505737</Data>
<Data>e0434352</Data>
<Data>0000000000008b9c</Data>
<Data>20e4</Data>
<Data>01d07b761ad593b2</Data>
<Data>C:\Windows\System32\Essentials\SharedServiceHost.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>5f028783-e769-11e4-80c4-00155d10040b</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Any assistance with this would be greatly appreciated!
mcbundus

SQL Server Analysis Services not showing in Services on Server on Central Admin

Hi All
We have a Sharepoint 2013 farm set up (2xApp, 2xWeb, 1xSQL) and we have a number of excel powerpivot workbooks deployed and refreshing.
This was all working fine, until recently when our Excel 2013 Tabular workbooks stopped refreshing manually. This had worked fine in the past, but now is giving the following error:
"An error occurred during an attempt to establish a connection to the external data source"
The first thing I wanted to check was that the "SQL Server Analysis Services" was started in Services on Server within Central Admin. However when i navigated to check this, I noticed that the service was no longer listed at all.
I checked the Analysis services for Powerpivot is running on the server and it is registered within Data Models on Excel services.
There was recently some Windows updates that were applied to the servers, but i'm pretty confident that the refresh was working after these, however i cant rule out 100%.
Hoping for any advice on what I can check/do here?
Thanks!

When i try to run that tool i actually get a strange error (we are running Enterprise Edition):
"PowerPivot for SharePoint 2013 Configuration is missing prerequisites: SharePoint 2013 Enterprise Edition is required.
For more information go to http://go.microsoft.com/fwlink/?LinkId=247828.
Please address the validation failures and try again."
Yes it looks like on the server hosting PowerPivot analysis server that a number of windows updates got applied. However
none look to be specifically about for SQL, and the 2 cumulative ones are for IE and Active X for Windows Server.

After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

     After
sql server 2012 installation, I   attached my production db. Because of some reasons, i
changed sql engine account from network service user to system user by means of sql server configuration manager.
     Now , there isn’t
a problem at sql server running system. But
I have doubts that
this can produce problems later. Because sql server database engine account must have privileges that listed below;
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
While sql server installation, setup gives these
privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
privileges.
Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
Log on as a service (SeServiceLogonRight)
     Bypass traverse checking
(SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
Replace a process-level token (
this can be set from user rights assignments)
Adjust memory quotas for a process
(this can be set from user rights assignments)
Permission to start SQL Writer (
? - give advice )
Permission to read the Event Log service (
? - give advice )
Permission to read the Remote Procedure Call service (
? - give advice )

Our server is windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu that is in local security policy settings gui.
And i have seen those permissions below were not granted to system user;
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
So, briefly you say, don't panic ?

SeparatingApplication Server from Central Services

Similar Messages

Maybe you are looking for