Sequence/Clip Settings and Rendering

Greetings from a new Final Cut user,
Upon placing a new QT movie into my sequence I get the "Attention - This clip does not match....Change sequence settings to match the clip settings ?" message. When I click "Yes" and the clip is placed in the sequence timeline I get a red bar that tells me the clip needs to be rendered. Why is this? If I click "Yes" to change the sequence settings to match the clip settings then why does the clip need to be rendered?
If I click "No" to not change the sequence settings to match the clip settings I get a green bar above the clip and the clip plays back fine without the "Unrendered" text covering the sequence monitor.
I have also rendered a QT movie from Motion with the same settings as my sequence and upon placing this clip into my sequence I get the same message as above with the same results when I click "Yes" or "No".
Can someone please explain to me what's going on? Thanks in advance for any help.
Jeff

Then that isn't normal.
#44: FCP acting weird - Trash Prefs
Shane's Stock Answer #44: FCP acting weird or unusual. Just not like is normally should
If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the Preference Manager from Digital Rebellion: http://www.digitalrebellion.com/pref_man.htm
http://www.kenstone.net/fcphomepage/trashing_fcpprefs.html
2) Open the Disk Utility and Repair Permissions.
3) Shut down for 10 min. Go for a quick walk around the block and get SOME exercise today. Come back, turn on the computer and see how things are.
4) (optional) Do the Hokey Pokey and turn your self about. Results may vary.
Shane

Similar Messages

Matching the sequence clip settings.

Ok so i have a Sony xdcam ex1 and i also have a panasonic dvx 100b, i am making a trailer with both of them in the same timeline and it matches the clip settings to whatever i put in to the timeline first, so the next clip i put in that doesn't match that settin looks real bad. Is there a way to have a timeline that supports both settings or no?
thanks

Start with a DV timeline, and drop the XDCAM footage from the EX1 into that timeline. Downconverting XDCAM 1080 HD to DV is a lot cleaner looking that upconverting DV to 1080 HD.
Oh, and never judge the quality of your footage on the computer monitor...only a broadcast quality monitor connected to the system.
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL NTSC MONITOR, OR AT LEAST A TV.
http://docs.info.apple.com/article.html?artnum=24787
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or NTSC monitor routed thru your camera or deck.
The canvas shows you what happens after the codec you are working with has been applied. The viewer shows you the material in its native format. There are a couple things you can do to make it look better:
1. Disable overlays on the canvas
2. Make sure you've rendered everything (no green bars at the top of the timeline
But still, your computer monitor will not show you a full quality image. For that you need an external monitor and a proper output device, such as those made by Canopus (ADVC 110, 300…only for DV), AJA, Black-Magic or Matrox.
Shane

Match sequence settings to clip settings should avoid rendering, right?

I drag my media to my timeline and that helpful pop-up stops and asks to match the sequence settings to the clip settings. I say yes, and because the two now match perfectly, this should eliminate the need to render --- right??
I've tried to match the squence before dropping in my media, but can't seem to find the right settings myself.
I can't waste time rendering. Please, any help on this is greatly appreciated!

Update:
I downloaded the Pavtube HD Video Converter App (it costs $35, but it seems worth it). It has a setting menu specefic to mediums; one for Finalcut Pro that includes an option for Apple ProRes. I used the ProRes HQ setting and left the size as original (remember I captured in 4:3). When I put into Finalcut, however, I get a message that says it is not optimized for Finalcut and, once again, I have a rendering issue. However, if I go back to Pavtube and export again, this time changing the ProRes options to resize at 1920x1080, I can import into Finalcut with no problem and no rendering. The catch is that in Finalcut, my video is now stretched to fit widescreen and unfortunately the 1920x1080 is the only size I've been able to export as and then import into FCP without any problems. This is resolved when I export using quicktime convesion and set the size back to 4:3 (shown in screen shot), but brings up another problem - squished text.
Just now seeing other posts to my questions...I will try those suggestions. Thank you!

How do I match a clip to sequence settings and sequence presets?

I'm getting the warning: Attention - This clip does not match this sequence's settings or any or our sequence presets.
I'm trying to figure out how to set things up in Compressor so that my clips do match my sequence settings and presets. The issue seems to be with the audio not matching.
Here are the sequence settings:
Audio-2 Outputs
Frame Size- 1920x1080
Vid Rate-24fps
Compressor-Apple ProRes 422 (proxy)
Aud Rate 48.0 KHz
Aud Format 32-bit floating Point
I shot all the footage with a Canon 5D Mark II. I'm using Compressor to convert all my original clips. The only thing I don't seem to be able to match is the Audio. I can't find any way in Compressor to encode clips that have "two outputs" in the Audio column.
The dialogue box for "Sound Settings" in Compressor doesn't offer any sort of options, that I can find anyway, to generate clips with "two outputs."

These are the Compressor settings:
Description: Apple ProRes 422 10-bit video with audio pass-through. Settings based off the source resolution and frame-rate.
File Extension: mov
Estimated size: 16.36 GB/hour of source
Audio Encoder
Apple Lossless, Stereo (L R), 48.000 kHz
Video Encoder
Format: QT
Width: (100% of source)
Height: (100% of source)
Selected: 1920 x 1080
Pixel aspect ratio: Square
Crop: None
Padding: None
Frame rate: (100% of source)
Selected: 24
Frame Controls: Automatically selected: Off
Codec Type: Apple ProRes 422 (Proxy)
Multi-pass: Off, frame reorder: Off
Automatic gamma correction
Progressive
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 0
Temporal quality: 0
Min. temporal quality: 0
These are the sequence settings:
Frame Size: 1920 x 1080
Editing Timebase: 24fps
Field Dominance: None
Pixel Aspect Ration: Square
Anamorphic 16:9: Off
Video Processing YUV allowed (8-bit)
Compressor: Apple ProRes 422 (Proxy)
Millions of Colors (24 bit)
No Data Rate Limit
No Keyframes Set
Quality: 100
Audio Settings:
16-bit 48.000 kHz Stereo
I made screen shots, but don't see how to paste them into this post.

Is there a way to create a sequence automatically from a clips settings?

I know you can go in and look at the settings and manually input them into the sequence, but I wondered if there was a way to ideally cntrl click (or something like that) the imported clip and "create new sequence" using the clip settings rather than doing it manually?
If there's not a way to do this, it would be a really handy feature for those of us dealing with multiple formats.
Thanks in advance.
Steve
G5, G4

About as close as you can get is to right-click on a single clip and Make Multiclip Sequence. Hit OK to make an sequence out of the single clip. Open the sequence made and delete the multiclip and edit the clip you want back into the sequence.

What sequence setting would you use to edit 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in FCP. Experiencing Quality and rendering issues.

What sequence setting would you use to edit both 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in a single timeline in FCP. I'm experiencing quality and rendering issues. I've tried numerous settings but can't seem to figure this one out. Thanks for your assistance.

Although you can combine the avchd 1920x1080 material with prores 1920x1080 in the same timeline, you might land up saving time just converting everything to 1920x1080 prores 422. You'd probably reduce the amount of rendering while you're working and exporting when you're done by a great deal. This workflow will require much more drive space.

"Change sequence settings to match clip settings"

Hi - I seem to have lost this prompt!!
Before when I bring a clip into a sequence with a different codec, FCP would ask me if I would like to change the sequence settings to match the clip settings..
I used to love this feature because it meant I didnt need to render the sequence and i could edit clips with most any codec/compression settings etc.
Anyway now FCP doesnt do it anymore! I send the clip down and it just puts it in the sequence and gives me the big RED BAR on top and I have to render.
I have repaired permissions. I have trashed FCP prefs..etc
I'm using FCP 6.0.4 on Tiger. Any ideas would be super appreciated!

Hey guys,
I found the same problem occurred with my own "weird codec". I'm on FCP 6.0.6 and I was doing some simple testing work with Photobooth's video feature, which records in MPEG-4 640x480 .mov. I tried getting my sequence to auto-conform with both 'ASK' and 'Always' settings, but no dice.
I didn't find a solution, mostly because it was easier to simply batch export them all as DV Pal clips, but I thought you might be interested. I posit the auto conform only works with more conventional video codecs like those listed in the Easy Setup options - of which, MPEG-4 is not.

Changing sequence settings to match clip settings-which settings are right?

I'm using a Canon HF10 camcorder and FCS 2 with a 24" iMac Intel Duo core.
When I bring in a video clip shot on my Canon HF10 (I shoot in its highest-quality mode: FXP and I do not use the 24 fps setting), I take FCP 6's recommendation to set the Sequence Settings to match the clip settings. If I then go to Sequence> Settings, I see that my Sequence Settings are 1920 x 1080 HDTV 1080i (16:9).
If you look at the Canon web page for my camera: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=269&mo delid=16186 , it shows that the camera is "Full HD" and "30p Progressive." So, why is FCP defaulting the Sequence Settings to 1080i? Is this default setting what I should be using?
Also, and perhaps more importantly, if I go into Motion 3 to create things to add to FCP projects that use the footage from my HF10, what settings should I choose in Motion 3's Select Project Preset window?
Thanks!

Hey guys,
I found the same problem occurred with my own "weird codec". I'm on FCP 6.0.6 and I was doing some simple testing work with Photobooth's video feature, which records in MPEG-4 640x480 .mov. I tried getting my sequence to auto-conform with both 'ASK' and 'Always' settings, but no dice.
I didn't find a solution, mostly because it was easier to simply batch export them all as DV Pal clips, but I thought you might be interested. I posit the auto conform only works with more conventional video codecs like those listed in the Easy Setup options - of which, MPEG-4 is not.

Optimal settings for rendering HD720 Sequence ?

Hey,
I have a sequence that made of variety of formats:
few *.mov files ( 1280*720 - rendered by softimage XSI )
few *.tiff files created in photoshop at a size of 1280*720
time is 7:22 min
The final movie is a presentation that will run 24/7 on a Television as a part of some tour
there is alot of delicate light ray effect that can easily be damged because not having best quality output.
so the file shuold be very good quality but not too heavy so it will not stuck when running (I tried render to mov file and it stoped evry 8 sec - 2.5 GIG)
what is the best format and codec for my purpose ?
thaks for reading.and sorry for bad english.

Blue tint? Not sure I can help you with that. Add some yellow maybe....
I'm pretty sure the codec isn't doing this but to make sure render to something else like:
Render an .h264 instead of .mo. Keep the same settings and bitrate.
The file is basically the same as above but it will have an .mp4 extension. It'll play fine as a quicktime an will also play in other player.
If you want to try another codec try to burn a MPEG-2 Bluray. Use one of the project presets for 720 (you may need to change the framerate) and render at the default settings.
This all I can think of. I can't see why the codec would make your footage blue. Rendering to other formats will rule it out. If any of this works gimmi some points, I wanna see what they do.

Sequence settings and export help please

It's been awhile since I've made a movie for dvd, and the last time was in PAL, so my settings are changed.
Now I'm making an NTSC dvd (Best quality possible) for a local historical group, and can't remember the settings!!
Using FCP 5
A Canon Elura 80 videocam, not HD, just ordinary DV.
I captured the video in iMovie and imported into FCP
Created 2 movies: one 4:3, and one 16:9 (filmed it in this format)
1. What 'export movie' settings do I need? Should I export as a QT movie, use DV Stream, or ?
I want to use iDVD to make the dvd, and I'd like it the best quality possible
2. Also, my 'sequence presets' seem different. They're Apple ProRes 422 (HQ) 1280x720 30p 48 kHz. IS this what they should be?
(And I'm far from being a pro,, I just like to have better control than iMovie gives me; i'ld just like to set my settings and leave them for everything i do .... or at least know what they all mean so I can make a decision which to use
Thank you
Elizabeth

I captured the video in iMovie and imported into FCP
Bad step there ... you should capture in the NLE you plan to use for editing. FWIW, iMovie captures DV different than FCE or FCP. You my have lost so quality there, but it depends on which version of iMovie you used.
1. What 'export movie' settings do I need? Should I export as a QT movie, use DV Stream, or ?
File->Export->QuickTime Movie. Do NOT recompress all frames, but do include chapter markers (if needed). You can make the movie self-contained or not. Drop the resulting file into iDVD.
2. Also, my 'sequence presets' seem different. They're Apple ProRes 422 (HQ) 1280x720 30p 48 kHz. IS this what they should be?
No, not if you shot and captured DV.
-DH

Help: Clips rendered in AE turn blue when changing clip speed and exporting in Premiere Pro

Hi
I've been having this problem in Premiere Pro CS5 (I'm just not sure with CS4 & ealier versions).. ok the problem is that in Premiere Pro CS5 when I change the speed of a clip that is rendered in After Effects and export it either in AVI or in MOV, it produces some blue flicker on that clip or sometimes the entire clip turns blue..This only happens when I am using Quicktime Animation codec in AE..I can't find any forum that discusses this problem..And I don't know if others are also experiencing this (except for my friend who is also experiencing this in MacOSX)..by the way my version of Premiere Pro is 5.0.3 and my After Effects is 10.0.2.4 (Windows 7 x64)..I don't know know if this is a bug in PrPro or AE, or if Adobe is aware of this problem..
Here's a video of what I am consulting to you guys for you to better understand what I'm saying.. (sorry, no audio)
P.S. CS5.5 users please tell me if you also experience this..
Thanks in advance!

This only happens when I am using Quicktime Animation codec in AE
So don't do that. It's probably not the best choice for video, anyway. I mean it says right in the name - "animation". There's a reason for that.
On a Windows machine, Lagarith and UT are two free lossless codecs that play well within the Adobe suite. Give them a try.
Or better yet, don't render out of AE at all. Use Dynamic Linking instead.

Clip Settings Audio Log and Capture

Whenever I go to capture video from my AJA connected to our DigiBeta deck using Log and Capture, I have to uncheck 14 of the 16 audio tracks turned on under Clip Settings, as I only need two tracks. This seems to be the default audio capture setting. Is there any way to change it to two tracks as the default?

I have this exact same question, only with a Black Magic Deck Link card.

Sync clip timeline and sequence timeline?

Hi guys,
Dumb question, but here goes...
Can you sync the clip timeline and sequence timeline when you scrub? I want to see the 'edit points' that are in the sequence and sync that to the location in the clip (left window) timeline.
Thanks for the help.
Jason

You can GANG the Source and the Program Monitors. That should do what you want.

Why does ntsc QT file in ntsc QT sequence need to be rendered?

I have a feature in 5 reels. All reels have been converted from PAL to NTSC via Atlantis and imported into FCP. I'm on deadline to deliver a print and thought that since all clips in the timeline are NTSC and the Sequence is NTSC it should not need to be rendered. Unfortunately, they do need rendering and I don't think I will make it. Why is it asking to render? Can someone please help? Here are the settings and info below. Thanks in advance for any help.
Each reel is now an ntsc QT clip.
Clip Properties;
Frame Rate - 29.97
Frame Size -720 X 486
Compressor -DV/DVCPRO - NTSC
Pixel Aspect - NTSC - CCIR 601
Here are the
Sequence Properties
Vid Rate - 29.97
Frame Size - 720 X 480
Compressor - DV/DVCPRO - NTSC
Pixel Aspect - NTSC - CCIR 601
G4 Dual 1GHZ Mac OS X (10.4.5) 1.5 G RAM, FCP HD 4.5

did you change the settings in the: Sequence>Settings menu or in the: Final Cut Pro Menu?
If in the Final Cut Pro menu it will take effect the next time you create a sequence and will not change the current settings.
good luck.
x

Sequence compressor settings XDCAM EX 720p in final cut = render issues

sequence compressor settings set to XDCAM EX 720p in final cut renders a clip and gives an unwanted speedup of clip. I am using XDCAM EX 720p footage. Anyone know what I'm doing wrong?

Try this; duplicate your sequence, select all and delete. Try editing one of your clips into the sequence. Does fcp tell you that your sequence settings do not match your clip settings?
If not, I don't have a clue (not the first time).

Sequence/Clip Settings and Rendering

Similar Messages

Maybe you are looking for