Sequence of Transformation Call

I am working on the Mapping where one procedure is called three times with different parameters. I want to execute the procedures one after other in the required sequence which we are not able to do so. What is the solution for this

Inside a mapping there is no guarantee on the execution order of the mapping activities (although, the order usually follows the order of how the operators were dragged and dropped into the mapping editor canvas).
Therefore, one of the possibilities is to divide the mapping into three different mappings and control the execution of the mappings by including them into a process flow.
Regards:
Igor

Similar Messages

Is it possible to check to see if a sequence has been called, or is run by a user?

I'd like a subsequence to be called, but I'd like the Sequence to run differently if it is called versus run by a user.
What statement should I use and is this even possible?
Thanks.

How would the user run the sequence by itself? Are talking about interactive mode?
If Runstate.Caller returns NULL, or Nothing in TestStand. Then you have an interactive execution, i.e. the sequence was not called by anything.
Thanks,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Sequence of Methods Calls

Hi
I still need more clarity on sequence of method calls. I have 2 views within an Application which uses a component controller. I have mapped the I/O plugs to navigate from View 1 to View 2. User clicks on a button on view 1 and navigates to View 2. User again clicks on a button in view 2 to navigate to View 1.
Now I need to know thge sequence of method calls starting from init() for component controller, init() of view 1 , user clicking a button, firing of plug methods, calling of init() methods of views, doModify() and so on.. I hope I made myself clear.
Regards,
Murali.

Hi Murli
      When you first call the view 2 by clicking on a button the init method will be called and then modifyView will be called and then you navigate to view 1 again and if again you click to navigate to view 2 at that time only modifyView will be called.
      In the particular session with a client init method is called only once in that particular session. for that view for that client.
      If you have any confusion tell me.
Ninad

Sequence of classes called in a badi

Hi guys,
I have a problem on the sequence of the classes called in a standard BADI occuring in different system.
In the DEV system, the sequence called is A, B, C (Just to illustrate). But, in the QA and PROD system, the sequence called is B, C, A. Versions of each objects have been compared and found to be the same.
Any ideas how to solve this?
Thanks!

Hi guys,
I have a problem on the sequence of the classes called in a standard BADI occuring in different system.
In the DEV system, the sequence called is A, B, C (Just to illustrate). But, in the QA and PROD system, the sequence called is B, C, A. Versions of each objects have been compared and found to be the same.
Any ideas how to solve this?
Thanks!

Find if in sequence editor API call

I swear I found this somewhere once but can't find it now. What is the API call (or other mechanism) to determine if I'm running from the sequence editor versus a UI?
What I want to do is if running from sequence editor, make one call, but if running from UI, make another.
Thanks.
Solved!
Go to Solution.

RunState.IsEditor
Thanks,
PH

BOBJ DI 12.2.2.1| SQL Transform call stored procedure on MSSQL 2008 FAIL

Hello everyone!
Sorry for my bad english.
in my job is one dataflow with sql transform, query and target table (LOG).
SQL Text is :
EXEC dbo.ProcName
in this SP next content:
BEGIN TRY
CREATE TABLE #t(...)
INSERT INTO #t SELECT (...)
INSERT INTO Table1
SELECT(...) FROM #t
ENDTRY
BEGIN CATCH
SELECT (row with error number, error message)
END CATH
IF NOERROR SELECT (row with no error and rows affected)
When I run it from Management Studio all is OK. Data is successfully inserted into Table1and rRow with rowcount was inserteg into LOG.
But When I run it in Job on JobServer exact row inserting into LOG BUT! no data inserting into Table1. and rowcount is equal in both cases.
What's happening?
Help please.

for calling a stored procedure from DI, SQL Transform is not the correct way of doing it, the better option is to import the stored procedure in SQL Server Datastore and calling in a script or in a mapping depending on what that SP is doing
to import a stored procedure in a DataStore, expand the Datastore select function node and click Import by name, in the type select function and enter the stored procedure or function name
for DI both Stored Procedure and Functions are treated as Functions

Sequence creating and calling

Hi
I want to use ODI sequence capability for generating my Primary Key.
Please help me as to how can I create the same and call it into my interface.
Its a File to Oracle transfer.LKM used :- File to Oracle
CKM used :- CKM ORACLE
IKM used :- Oracle Incremental Update.
I need the solution asap.Please help me.
Thanks
Prashant.

You could modify your process model to dynamically call a sequence run it and then and dynamically load another sequence and so on.... until all of your sequences have been run. you would need to add control into the process model that decides which sequence gets run when, and also when to finish looping a terminate.
Take a look at 'Engine.GetSequenceFileEx' and 'Execution.ClientFile' methods if this sounds like the sort of thing you need.
Regards
Steve
Message Edited by SercoSteve on 05-30-2006 05:55 AM
There are 10 types of people in the world that understand binary, those that do and those that don't.

Hide sequence from being called by external test sequences

In TestStand, is there any way to hide a sequence so that it can't be called by a test sequence in another sequence file?
Thanks,
Melissa

Hi,
No.
You could do something similar thats done in the process model sequence file, SequentialModel.seq. That is to check if its been run from valid sequence or sequence file. The SequentialModel.seq entry points, Test UUTs and Single Pass, do a check to see if they have been run from a client file. They terminate the execution if it hasn't
Regards
Ray Farmer
Regards
Ray Farmer

Transform call returns the xslt??

I have a strange problem. After executing a transform, my result is the original template and not the transformed output. I tested the xslt using Altova and it worked fine. When I try making the transform in my java code, I get the problem.
My code is fairly simple...
TransformerFactory tf = TransformerFactory.newInstance();
Templates tmps = tf.newTemplates(auditTemplate); //auditTemple is DOMSource containing the xslt
ByteArrayOutputStream baos = new ByteArrayOutputStream();
StreamResult sr = new StreamResult(baos);
DOMSource src = new DOMSource(resultNode); //result node is my XML Document
Transformer trans = tmps.newTransformer();
trans.transform(src, sr);
return baos.toByteArray(); //this returns the original xslt???Has anyone seen a problem like this? It must be something dumb.

I ran into this problem myself and it took me a while to figure it out:
You need to read the xslt xml with a documentBuilderFactory that is namespace aware;
if not, it will still read the xslt file but without namespaces. When using such
an xslt for transformations, it will no longer act as an xsl transformation, but instead result
in an echo of itself (why it does not throw an error instead I don't know).
DocumentBuilderFactory documentBuilderFactory = DocumentBuilderFactory.newInstance();
-> documentBuilderFactory.setNamespaceAware(true);
DocumentBuilder parser = documentBuilderFactory.newDocumentBuilder();
Document documentWithNamespaces = parser.parse(uri);
The xml file you want to transform can usually still be read by a non-namespace-aware parser, if
it does not depend on namespaces like xslt does.

Detect "terminated" status of sequence call

Hello,
I am using TestStand 2012 and one of my sequences is a bunch of sequence calls to other sequences.
Each call is being made using the "Use New Execution", and waiting for the execution to finish before the next step.
I am using this option because I like having different reports for each sequence.
However, I still would like to capture which call succeeded or failed in my main sequence.
For this, after each call, I have a statement whose status expression is:
( Find( RunState.PreviousStep.ResultStatus, "Passed", 0, True, False ) >= 0 ) ) ? "Passed" : "Failed".
The problem I'm finding is that when one of the sequences I'm calling is terminated in the middle due to an error in the UUT which doesn't allow me to continue testing, the main sequence gets the status as "Passed".
So, when I see "Passed" in my main sequence report, I still have to open the individual reports to make sure it really passed.
Would anyone know a way around this?
I tried changing the status expression of the sequence call step but it's a read only field.
Thank you in advance,
Leandro
Solved!
Go to Solution.

Hello,
Sorry for the confusion... let me try to be more clear...
So, my test campaign for a specific UUT is composed of about a dozen sequences, which can be run independently. But I created another sequence, to work as a "batch", calling all these dozen sequences.
Pretty much what it does is:
1) Call first sequence in new execution
2) Wait for execution to finish
3) Check results of execution
4) Add results to report
5) Wait 10 seconds
6) Call second sequence in new execution
7) So on...
So, for each new execution, I have a dedicated report, which is exaclty what I want. But for my "batch" sequence, I would like to be able to get a report saying which executions passed or failed, so I don't have to open the reports for each execution individually.
The way I'm doing this (in step 3 above) is with the following expression:
( Find( RunState.PreviousStep.ResultStatus, "Passed", 0, True, False ) >= 0 ) ) ? "Passed" : "Failed"
This way, anything different than "Passed" would give me a "Failed" result for that execution, and that's fine. The problem is that when one of the executions is terminated before it's finished, the PreviousStep.ResultStatus is giving me "Passed".
I didn't know about the GetStates() method... Looks promissing! I'll give it a try.

Call Transformation Problem

Hi All,
Our SAP system is recently upgraded to ECC 6.0 from 4.7. I am getting a runtime error while executing a program. I debugged the code and came to know that the runtime error is because of the following statement.
            CALL TRANSFORMATION (`Z_XSLT_QUERY_RESULT`)
            SOURCE XML w_xml_out
            RESULT     outtab = <outtab>.
Please see below for more info on the runtime error.
Runtime Errors         TRANSFORMATION_NOT_FOUND
Except.                CX_INVALID_TRANSFORMATION
Date and Time          07/17/2007 10:32:11
Short text
     No load could be found for transformation "Z_XSLT_QUERY_RESULT".
What happened?
     A load was searched for transformation "Z_XSLT_QUERY_RESULT". This action
      failed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_INVALID_TRANSFORMATION', was not
      caught in
     procedure "PROCESS_FM" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     A load was searched for transformation "Z_XSLT_QUERY_RESULT". This action was
      unsuccessful
     . Either the transformation does not exist or it contains syntax errors.
I checked executing the same program in 4.7 and it works fine.
Any info on this is appreciated.
Thanks,
Naga

Hi,
If the transformation is named Z_XSLT_QUERY_RESULT, the call transformation must be called as CALL TRANSFORMATION Z_XSLT_QUERY_RESULT (No parentheses or quotes are needed). If it is a dynamic transformation call, the it must be called as CALL TRANSFORMATION (Z_XSLT_QUERY_RESULT) (No quotes). You can use one of these contructions according to the type of the transformation call.
Regards,
Sükrü

CALL TRANSFORMATION - XSLT encoding not settable?

Hello fellow ABAPer,
I have a problem creating an XML file from an simple itab, using XSLT transformation (CALL TRANSFORMATION).
Here's what I'm doing: I have a simple itab it_person type tt_person:
TYPES: BEGIN OF tt_person,
id(4) TYPE n,
firstname(20) TYPE c,
lastname(20) TYPE c,
END OF tt_person.
I'm filling it_person with test-data:
gs_person-id   = '1'.
gs_person-firstname = 'John'.
gs_person-lastname = 'Smith'.
APPEND wa_person TO it_person.
Now I'm getting the reference of my itab for the CALL TRANSFORMATION command and I'm finally doing the actual transformation like this:
CALL TRANSFORMATION z_test_transformation
    SOURCE (it_source_tab)
    RESULT XML it_xml.
The Transformation (XSLT Program) looks like this:
http://uploading.com/files/775c1d31/trans.txt/
(sorry, I tried to post the transformation's code here, but that's not working, it screws the whole formating of this posting, that's why I had to upload it)
When I'm gui_downloading the XML file it looks like this:
<?xml version="1.0" encoding="iso-8859-1"?>
<CUSTOMERS>
<item>
    <id>1</id>
    <first_name>John</first_name>
    <last_name>Smith</last_name>
</item>
</CUSTOMERS>
So everything is fine, until now: I need a different encoding, the other system's parser is not able to read ISO-8859-1 encoded files. So I need the first line of my XML to look like this:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
... and this is where I'm stuck right now, I can't get that to work.
I can change the line in my transformation to:
<xsl:output encoding="uft-8" indent="yes" method="xml" version="1.0" standalone="no"/>
but the resulting XML file is still ISO-8859-1. The "standalone" tag, that I need as well, doesn't work either.
So, what am I doing wrong? Is it not possible to create other XMLs than ISO-8859-1 with the XSLT-Transformation?
Thanks alot, any help would be highly appreciated.
AJ

I guess it_xml is an internal table cotaining chars?
i'm using
xxml                    TYPE xstring,
and
CALL TRANSFORMATION z_abap_to_xml_root
      PARAMETERS mestyp = c_mestyp nsuri = c_namespace
      SOURCE filename = fname table = it_out
      RESULT XML xxml.
and i'm getting the xml encoding like
<?xml version="1.0" encoding="utf-8" ?>
Directly after your transformation insert the following call if your report can run interactively:
CALL FUNCTION 'DISPLAY_XML_STRING'
      EXPORTING
        xml_string            = xxml
*         TITLE                 =
*         STARTING_X            = 5
*         STARTING_Y            = 5
      EXCEPTIONS
        no_xml_document       = 1
        OTHERS                = 2.
This displays the XML so you can check the encoding to be sure that the data is not tempered elsewhere.
Downloading the XML String even if its xstring should be no problem.

How to run SequenceFilePostStepFailure model callback after step failing with nested sequence calls

Hi,
I would like to pop up a message box immediately on any test failures. I had thought I could use the SequenceFilePostStepFailure model callback to achieve this,but when I modify the process model callback to achieve this, I've found that the callback code is executed only for step failures of the top level sequence file.
My test code has mutiple sequence files being called before getting down to the granularity of the basic numeric limit test that will pass or fail, so I'd like to execute the SequenceFilePostStepFailure callback immediately at that level. I can achieve this by adding a SequenceFilePostStepFailure callback override in the sequence file in question, but I'd prefer to use the default model callback implementation so I don't have to find all the places where numeric limit tests are executed and cause the DUT to pass/fail.
I've attached some example sequences that I hope illustrate the problem.
Thanks for the help,
Daniel
Solved!
Go to Solution.
Attachments:
TestCode.zip ‏55 KB

My fault, I see now that the model callback I should have modified is the ProcessModelPostStepFailure. Problem solved.

Calling IP planning sequence several times

Hi Experts,
we are trying to start a IP planning sequence n-times throughout an ABAP report which is located in a process chain.
In the planning sequence a function from type distribution is located which should distribute line of business nodes to their line of business key.
Both values ( from and to ) will be represented by variables. This variables has to be folled during run time.
The values for this variables are located in a table.
When the sequence will be called the first time a function module : u2026 OLAP_VAR delivers the first value for this variables automatically .
When the sequence will be called the second time the function module wonu2019t be called again to delivers the next value for the variables.
Do you have any suggestions how to get the next values for the variables in the second and further calls .
Regards Michael

Hello Marc,
thank you for responding so soon and for the information about the note.
Meanwhile we figured out how to call a planning sequence n-times.
We just called the function module with the destination u2018NONEu2019
CALL FUNCTION 'RSPLPPMRFC_PLSEQ_EXECUTE'
    Destination 'NONE'
u2026
and closed the destination after the sequence has ran.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
   EXPORTING
     DESTINATION                = 'NONE'
    TASKNAME                   =
   EXCEPTIONS
     DESTINATION_NOT_OPEN       = 1
     OTHERS                     = 2.
This caused the system to reload all needed variables.
Regards Michael

Determining Sequence Call information

When handling TS_UIMsg_Trace message in operator interface and executing step in subsequence, how to obtain handle of step, which call this subsequence.
For example:
MainSequence:
Step1
Step2(Call Sequence2)
Step3(Call Sequence1)
Step4(Call Sequence2)
Sequence1:
Step1_1
Step1_2(Call Sequence2)
Sequence2:
Step2_1
Step2_2
During handling TS_UIMsg_Trace event from Step2_2 of Sequence2, how to know that Sequence2 itself was called by Step2 of MainSequence(for example), and neither by Step4 of MainSequence nor by Step1_2 of Sequence1, and so on?

You will need to use the TestStand API to get the SequenceContext of the Execution that generated the trace UIMsg, and then you can simply obtain things like the "CallStackName" of the calling sequence to the subsequence, or the Sequence name and Step name of the calling sequence. More specifically once you have the SequenceContext that generate the UIMsg, you can use the TS API to retrieve the CallStackName of the calling sequence through the "RunState.Caller.CallStackName" property path. The same is true for the calling sequence's sequence name and step name with the "RunState.Caller.RunState.Sequence" and "RunState.Caller.Step" property paths respectively.
I have included an example sequence file that illustrates the scenario you posed, so that you can
see the API objects and methods to manipulate to obtain this information. Note though that you will need to adapt this to code in your UI that starts with the UIMsg object you receive in a trace event, to obtain the Execution the event occurred in and then the SequenceContext belonging to that Execution. For more information on using the TestStand API, reference the TestStand Programmer Help (Sequence Editor Help >> TestStand Programmer Help).
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask
Attachments:
FindCaller.seq ‏30 KB

Sequence of Transformation Call

Similar Messages

Maybe you are looking for