Sequence Settings message when adding LT clip

I was one who took the plunge with QT 7.4.5.
I'm running FCP 6.0 on OS 10.5.2
I found upon importing a rendered Livetype clip that when adding to timeline it shows this message:
<Warning This clip does not match this sequence's settings or any of your sequence presets
For best performance your sequence and External Video should be set to the format of the clips you are editing.
Change sequence settings to match the clip settings.?>
If I say no, it needs to be rendered. If I say yes it adds to the timeline without needing rendering.
BUT...THen any other previous clips added from the project force the above message.
I am wondering what in my preferences are being affected and what is a good workaround?
Perhaps just adding and re-rendering in FCP?
Thanks!

Duh..I was looking in preferences, and now I vaguely remember this menu.
Thanks ThrillCat!!

Similar Messages

Premiere Pro CS6 switching sequence settings from previously edited video clips

When importing my video clips into Premiere Pro, which are currently set at 1920 x 1080 both from the video clip and sequence settings, it switches to 720 x 480 (says file has mismatch - keep or change settings, I've done both results the same) when I export and when I put clip on timeline it switches it to 1440 x 1020. The video clips were done on a earlier version of Premiere Pro at another facility, where we put the audio and video together to make a complete video clip We shot the footage using a Canon DSLR at 24 ups and are MOV files, done on a Mac
If anyone else has had this problem and found a solution, plese pass on.
Carl A.

Take your imported footage and create the sequence by dropping one of the video files on to the "New Item" button.
If your footage is actually showing in the project panel as 1920X1080, the sequence that will be created will match that. Guaranteed.

Inconsistent Conditional Text Settings Message When Making a PDF

I'm working in FM 11 and get a "Use Condition Indicators setting is inconsistent" error message when printing my book as a PDF. I have two child books in a parent book, so my book structure looks like this:
I've been trying to fix this all day and tried mif washing to delete the stuff shown below, but it didn't work:
So I started from scratch: I opened each .fm file separately (not from within the book, but the file itself) and deleted all conditions. Sometimes I had to delete them from the Master Page in order for them to stay deleted. (Not sure why, because those conditions were not on my Master Page, but it was the only way the conditions would stay deleted.) Then I updated each of my child books. The child books print to PDF without errors. I clicked on each child book and selected all files in the book, and no conditions were present. Good.
Then I made a new book and added the front cover, checked the parent book for conditions and there were still none. Good. As I added each child book and finally the back cover, I kept checking the parent book for conditions are there were none.
I then told the parent book to read page numbers from the files, and updated my parent book. That's when I got these conditions:
But as soon as I click on the parent book window again, those conditions go away. I think those conditions have something to do with the TOCs???
Anyway, I then printed to a PDF and I got the Use Conditions error message. When I show conditions for the parent book, nothing shows up, so why am I getting this message?
Thanks for your help.

Thanks for your reply, Arnis.
I must be missing something because there are no conditions in either child book or the parent book.
I don't understand why I'm getting the warning when I'm not seeing ANY conditions.

Error Message when adding Expired Bidder

Good Day Experts!
I would like to know if there is a way to restrict adding of expired contact persons in an RFx.
Thank you!

If the system allows you to add expired bidders, you could implement the BBP_DOC_CHECK_BADI to throw an error message when that happens.

How to Given the Message when Adding the Marketing Documents

Hello Experts,
I have Required only Message for when Adding the Markeing Documents that times
I want give the message for " Please Check the Control Account"
Is IT Possibal in SAP
Dixit Patel

Hello Dixit Patel,
It is possible but that need SDK coding.
Thanks,
Gordon

Final cut Express HD sound splits when adding video clips

this have been happening recently. I set up my music and start add video and photos. Im new to FCE. Anway now when I add a clip the music bar splits seperating to the width of the clip.
Whats causeing this and what is the fix.
thank you

Hi
A. I don't know
B. BUT it happens to me to and my strategy is
- to add new material beyond the end of all material in TimeLine
- then move it into place.
This also happens to me when adding Video to another track ==> all splits - but by first add it beyond the end and move it into place always works.
But to be able to put it (Video, Photos and Audio) into right place directly would have been great.
Yours Bengt W

Clips splitting when adding more clips

i have one main movie in my project and then I'm adding more clips on top of it on other video tracks.
the only problem is, whenever i do that, my main clips splits into two, right in the place where i'm adding a new clip. is there any way to disable that?

sounds like you are insert editing the new clips and you want to do an overwrite edit.
if you are doing it by drag and drop, take note of an arrow that appears when you drag the clip to the timeline. if you hover the mouse in the top third of the clip you are editing to, the arrow will point right - meaning it will 'insert' the new clip, and therefore move everything to accommodate. If you hover the mouse in the bottom two thirds, you will see the arrow point down - this means it will be an overwrite edit, and it won't move the other clips..
cheers
hugh

Change sequence frame rate when there are clips in it.

Hi,
I finished a three minute video (1444x1080, 29.97fps), then I had to do a slightly different version (first was for corporate clients, 2nd for regular clients). I opened a new sequence, then selected all of the clips in the first timeline, copied, then pasted them into the second timeline. As I started to make the changes I noticed that some of the clips had moved around and the lengths were slightly different. Since I had to make changes anyways, I didn't worry about it too much. Then, just as I finished, I realized the problem. The new sequence was 23.98fps. Ah!
I've already learned that you can't change the timebase of a sequence that has clips in it. I tried creating a third sequence (making sure the settings were correct) and then copying and pasting the clips from sequence 2. However, they go completely wonky in the new timeline. The various tracks don't line up and the in and out points of the clips have changed.
Is there a way to get my 24fps sequence into a 30fps sequence without having to fix or redo most of it.
Thanks.

Ha. Thanks. That's good to know. I won't waste my time trying.

Zoom settings change when adding pages

Hi
When adding a page to a document with this code:
app.activeDocument.pages.add(LocationOptions.AT_END);
InDesign automatically reverts the zoom setting to FIT_TO_PAGE
Is there a way to prevent this from happening?
I would like that it should stay at whatever it was.
Help will be much appreciated!
Thanks,
Davey

Davey_Doo wrote:
1) is there a difference between what I wrote "layoutWindows[0]" and what you wrote "windows[0]"?
Yup, "layoutWindows" refer to just the layout windows -- the ones one is normally working in. The other kind is "storyWindows", which is what you get when you open a text in the "Story Editor". There are vast differences between the two, such as "zoom" (you cannot zoom in on the story editor window).
Using "windows", without specifying the kind, you get a list containing both types; and using "windows[0]", you get the very first one, whether it is a story window or a layout window. Then, if it happens to be a story window, csm_phil's script will Crash & Burn because you cannot zoom in on a story window.
Your version will work correctly, and just in case you might have a story editor window open, it's best to stick to "layoutWindows" if you want to change a layout window property.
2) Although this does help, is there a way to prevent it from happening?
The reason I ask is because in a script which adds many pages, (e.g., MultiPageImporter script), the script needs to do this after adding each page.
No, you cannot prevent it in any way. It's just ID's default built-in behavior (although it seems strange that this only happens when using a script!).
But I disagree with your assessment it needs to be done "after adding each page". ID does not store the zoom percentage for each separate page and so it is enough to read the current zoom, add as much pages as you like, then set the zoom.

Error message when adding values to another table

hi i have a situation where am adding values from a view to a bean,my use case is i have a list of user in my view where am adding them to my bean by clicking the button,but now i what to validate when adding a user in such a way that if i added a use in my bean and i try to add that user again in current selection i must have validating error saying the user have been added already my code is
Edited by: adf0994 on 2012/12/13 2:19 PM

looks like you should have asked this in the ADF-forum...
JDeveloper and ADF
Why don't you simply configure the user name beeing unique in your entity?
ADF would raise an exeption for you.
public String onRowCreate( Row currentRow ) {
return null;
}Don't do that.
returning a literal null is almost ever a mistake! In this certain case you should declare you methods return type as void and ommit the return statement.
bye
TPD

Crashes when adding a clip to the sequence!

When i try to drag a clip into the sequence, a prompt comes up saying Adobe Premiere Pro has stopped working!
Help! i have a project due in a few weeks and i cant rely on windows movie maker!
I am running it on a HP Probook 450 with Windows 8.1 64 bit
Thanks

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575

Settings changing when adding to another movie

Each time I attach a new chapter (mini movie) PROJECT to the already existing main movie PROJECT the settings change. I have tried adding on the front with the new chapter as well as trying to add the main movie to the mini movie. Is there a way to lock all settings on a movie so when it is added to another movie the setting won't change oon either clip. The chapter movie is approximately 1 1/2 minutes long and the main clip is approximately 9 Minutes long. There are several transitions, and scrolls included in both clips.
Message was edited by: jimfromdenver

Hi Luis, thanks for the reply. I first made a video approximately 8 minutes long. I used digitized video, still images, sound tracks, titles and numerous transitions between the clips. I then opened a new project and made a movie of one of the last letters sent home by the veteran prior to his death. I also used transitions, movie clips, titles and various images. So far I have three of these last letters completed. I was able to copy and pasted two of the letter clips in front of the main generic movie. However, when I attempted to paste the third clip at the beginning of the main movie and two letters - it causes some of the titles, scrolls to overlap.

In-app purchase: Error message when adding a test storekit user

Hi, I'm running into the "The email address you entered already belongs to an existing Apple account. Please try again." when I try to add a test user for in-app purchases. I used an email associated with an existing Apple-id.
I'm running into "Could not convert Apple ID account to iTunes store account." when trying to add a test user with an email-id that doesn't have an Apple-id with it.
I have enabled "in app" purchases and added an in-app-purchasable product id using itunesconnect.
Using the programmer-portal, I've also configured the app-id of the app to enable store kit in-app purchases
I'm assuming that I need to signin with the test-user account for the code to receive the storekit productsRequest:disReceiveResponse callback. However, I haven't been able to create the test user
Does anyone know why both scenarios (described on top) are resulting in an error message ?

If I try to login from Settings->Store, it asks for my credit info which I'm sure is not necessary.
Apple had this to say about that on 8.28.09:
"Setting up Test Accounts for Testing In App Purchase
Before testing In App Purchase in your application, you need to create an In App Test User in iTunes Connect—you should not use other accounts as doing so will result in prompts to enter your credit card number and other information.
Here is how to properly set up your test user for testing In App Purchase..."
Please read all the latest info at the link and good luck w/your app.

Error message when adding video to premiere pro, please help!

Hi there,
Every time I try and add a video to premiere pro I get an error message "There was an error decompressing audio or video." I made the video in After effects and it plays just fine but I wanted to add sound to it in premiere pro. The file is mpeg movie, I can get more info if needed, just let me know. I am not very experienced at all in adobe but i'm learning so if someone could please help, that'd be awesome? P.S i'm using a MAC

You're welcome.
I've never visited Paris but it is on my list.
I don't believe the 10.4.4 Update had anything to do with this. I also have a .Mac account and I didn't experience any problems sending with any of my accounts and different SMTP servers after installing the Update.
Something to try.
Go to the SMTP server settings for the .Mac SMTP server and in the Server Port field, enter 587 in place of 25 and when finished, select OK to save the changed setting.
Test if this resolves the problem.
Having the SSL warning message is odd if Use SSL is not selected for the SMTP server and if using 587 as the server port doesn't resolve the problem, this may be a Mail.app preference file problem which is the file that stores all account settings.

Error Message when adding a Purchase Order

Hi,
When i enter a new Purchase Order and click on Add, it gives the message as "No Matching records found G/L Accounts (OACT) (ODBC 2028) [Message 131-183]

Hi Manzoor,
This is because in the purchase order there is one or more items that have no set G/L account. I suggest you allow to visualize the "G/L account" Column in the Form Settings/TableFormat in the purchase order, and then go to the G/L account and set a VALID G/L account.
It is not very logical to put that information in an order, but however you must do that way.
Hope it helps.

Sequence Settings message when adding LT clip

Similar Messages

Maybe you are looking for