Sequential use of CR 11 and CR 13 is impossible - probably libraries locked
Hi All,
I have a problem with my application.
This application is written in VB6 and references CRViewer.dll v11.0.
I have added new code to my application written in WPF which references CrystalReportViewer v13.0.2000.0.
Problem is that when I run old code which uses CR 11 and show report and close report and then I want to open different report with new code which uses WPF and CR 13, I get an error:
Retrieving the COM class factory for componet with CLSID {F734A321-8381-4FFD-A614-139E8906EC83} failed due to the following error: 80000003 One or more arguments are invalid (Eception from HRESULT: 0x80000003).
But when I restart my application and open Report by WPF it works flawlessly but then I'm unable to use my old CR13 components, during opening same report as was opened before, it shows error:
Invalid TLV record. Error number -2147206429...
Unfortunately leaving behind CR11 is not an option...
I have checked my application with ProcMon from SysInternals but without success, it seams that opening of both reports in different viewers doesn't call same library directly and after closing I dispose these viewer objects.
I don't really know what to do next,....
Could you please help me?
Thank you in advance...
Honza
Hello Ludek,
Yes, you're right.
But still, different errors appears when these actions are swapped, first .NET and then VB6.
To clarify it:
.NET code is part of that application writtten in VB6.
It happens only when run only within one instance of application, when run from two instances and each uses different viewer, it is OK.
Thank you for your ideas,
Honza
Similar Messages
-
I've tried going on my computer and backing it up, and it starts to work, but after a little while it will say Unable to connect to this iPad. Enter the passcode and then try backing up. There's a little problem though... I CAN'T REMEMBER IT! I'm getting very frustrated at this point because i've been trying so many different ways to make it work, and it never does. Please help.
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Where do I find a tutorial on how to use photoshop elements 11 and premier elements 11?
Where do I find a tutorial on how to use photoshop elements 11 and premier elements 11?
The tutorial courses that got me going were on lynda.com. Both the PE and PrE courses are taught by instructors that know the software and how to teach on line.
The difference between random turtorials and a course is organization. A course has a beginning, or foundation and builds skills one at a time. Random tutorials like on Adobe TV or YouTube can be very good but they don't have the sequential skill building process.
Many of the Adobe TV tutorials are chapters provided by lynda.com as part of their marketing program. If you like them, you can pay the $25 a month for the full course work. -
I am using the mac QQ and when I login it said login timeout.
I am using the mac QQ and when I login it said login timeout.
If you are missing using google maps - try the Nokia map app called "here"
-
I want to enable us to share all apps, music, videos and photos, but enable each phone to keep its contacts and history separate. If I use 1 ID, all new purchases will go on the same credit card, which I'm not sure is ideal, but not horrible. Since we use the same computer and iTunes using only 1 appleID, and the phones are new to the equation since it was only iPods before, what is the best way to handle a family with 3 phones that can share all entertainment content, but not all phone-related stuff? I saw that you can use one AppleID for purchases, but another for iCloud. That may be the best solution, but I don't know enough about this yet to move forward yet- migrating from Android...
Appreciate the help.Thanks for the help, but a follow up question now.
My iPhone won't arrive for a little while, but my wife already got hers and she wants to set it up now. Using my Apple ID for the purchases, if she starts setting hers up, can she change her iCloud ID to something else quickly? It keeps telling us that we have to sign in with the AppleID first.
Should we just set up an iCloud account via normal internet before trying all this via iPhone? -
I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id
There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons, -
My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years
answered in your other thread LR 4 suddenly no longer recognizes files.
-
Hi!
I hav just got a macbook pro and am used to using a HP pc and am a newbie! I have backed up my macbook with my elements external hardrive and was wondering if i can transfer the music i have purchased and is now on my external hard-drive back onto my other laptop purely because i use both laptops for different things and want to use my music on both. how do i do this? and do i need a particular software to do so?
Any tips would be greatly appreciated
thanks
alex xxxWelcome to Apple Support Communities
You can do it, but it's not recommended to use a Time Machine volume to store other files. In this case, you can create a second volume on the external drive, so you will be able to use it to store data and transfer it to other PCs.
As you are going to use the external drive with other PCs, you can make the volume and format it in "MS-DOS (FAT)" with Disk Utility > http://pondini.org/OSX/DU3.html Finally, you will be able to copy files to the external drive.
If you copy files to a Time Machine disk, you may damage the Time Machine file structure, so you shouldn't do it. It may not happen, but it's better not to try that. Also, you won't be able to read the Time Machine drive in a PC -
I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?
Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.
-
I have been using itunes all day and then it wanted me to install a newer version. When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error. How do I get itunes back the way it was or to work?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.Go to the menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience. -
I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks
Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks. -
Adobe Fonts used in logo design and copyright laws
Hi, if you are using an Adobe design software such as Illustrator, Flash or Fireworks to create a logo or banner for use as print and or web where it includes Adobe font in the logo and the characters create words ie; the trading name of the business do you need to approach Adobe for permission to use the fonts or is it expected considering the software is for graphical creations?
Why are we now saying that Photoshop can be used for logos? And what is wrong with CorelDraw? For someone who does not want to argue, it seems odd that an argument is happening within their own posts. :)
The ideal logo design tool offers versatile vector path editing tools and spot color swatch capability. Logo designers generally use Freehand, Illustrator, or CorelDraw... which all offer these abilities.
More info... -
Idoc DEBCOR - Extend use to Business Partners and customise
I am writing a high level technical design document on a new interface for my current client. We are currently in the scoping/blueprint phase.
We will be implementing CRM(?), ECC 6.0 and PI7.0
I have been tasked with writing/creating an outbound interface from CRM/ECC to send Business Partners from ECC to an external application via PI. Preferably using standard SAP functions/transactions!
Can I use the DEBCOR Idoc and customise/add the additional segments I require for the additional fields for this interface?
I was hoping to use BD12 (send Customers - Master Data Distribution) as well, but unfortunately, I do not have a sandpit/development system to use yet as we are still "blueprinting", therefore I am unable to test my assumptions before finalising the HTD document.
If DEBCOR cannot be used is there any logic in use the ADRMAS anc customising this?
I was hoping to use change pointers as well, but I guess once I have the Idoc configured, I can work out the distribution model in BD64..
Has anyone sent Business Partners from ECC and if so, what methods were used?I am going to try and see if BusinessPartnerDataManagementBusinessPartnerEventOut.informBusinessPartnerAsBulk fits my requirements.
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?applytx=&id=86162F8CD62011DB2B24000F20DAC9EF&fragID=&packageid=DBBB6D8AA3B382F191E0000F20F64781&iv= -
What the difference and use between of TABLES and SY-REPID?
Hi,
Experts,
I have came accross 2 cases that i can't able understand
EX1:
TABLES: VBAP -
>( Here also Appplication Server(AS) creates Wrokarea of Structure VBAP but, by
data: v_vbeln like vbap-vbeln. double clicking on variable v_vbeln AS taking me to DDIC VBAP table VBELN field then what the using declaring tables. )
( and )
DATA: VBAP TYPE VBAP -->( Here also Appplication Server(AS) creates Wrokarea of Structure VBAP data: v_vbeln like vbap-vbeln. but,double clicking on variable v_vbeln AS taking me to user declared VBAP
i.e., above DATA declaration statement )
Then Which one is better in Functionality wise as well as Performance wise or when we have to go for TABLES and when we have to go for DATA declaration of DDIC objects.
EX2:
what the difference between
I know that SY_REPID is not a system variable. And also that
Data: vrepid type SY_REPID.--> Predefined data type in ABAP
and
Data: vrepid like SY_REPID.-> Predefined Constatnt in ABAP( it is a constant it allowing with out VALUE
attribute)
what difference between them and when we have to go Data: vrepid type SY_REPID and when we have to go Data: vrepid like SY_REPID.
Thank U,
Shabeer Ahmed.Hi Ahmed,
TABLES:
VBAP. " DDIC
DATA:
v_vbeln like vbap-vbeln.
*Here you are using the DDIC VBAP
DATA:
VBAP TYPE VBAP.
DATA:
vbeln like vbap-vbeln.
*Here you are using the local data object as your data type so it will always
* take you to user declared VBAP which is declared by you.
DATA:
T_VBAP TYPE VBAP.
DATA:
vbeln like vbap-vbeln.
* here its using T_VBAP not DDIC VBAP
And for performance always the second option is better, use Data instead of tables, declare your own local structure.
Data:
vrepid type SY_REPID. thereis nop redefined data type in ABAP as SY_REPID
* its SY-REPID which is a system variable.
Data:
vrepid type SY-REPID.
Also refer to the links:
Difference between tables statement and by using type statement
for type and like:
Re: LIKE and Type in abap statements
With luck,
Pritam.
Maybe you are looking for
-
Its abt 18 mnths old....The screen freezes at times...n shows all signs of an old phone..Jus wna know if the apple service centre cd do anything abt it...
-
From which table do i fetch cost center????
Hi.. i have material and plant as selection screen parameters.. CSKS table has plant and cost center.. but when i checked the contents of the table...there is no value for plant.. so plz suggest me smeother table wherein i can fetch cost center detai
-
Unicode String in JFrame's Title Bar / why is java a non-Unicode pgm in XP?
My big question: Why is Java detected as a non-Unicode program by Windows XP? I need to do the following before I can write Japanese characters on the JFrame's title bar on Window XP: From the Control Panel -> Regional Settings and Languages -> Set t
-
Using the retouch tool, how do you make it change color? The old iPhoto one did, this one seems to be flesh-tone only, which is not how I need it to be. In old iPhoto, used the local color to blend, it was great.
-
I have downloaded and installed the Software Updater. However, while running it, it wanted to download a 73mb firmware upgrade. My problem is that because I have a slow connection, 73mb can take up to 3 days to download so I had to cancel it. Is it t