Serious problem with belle update FP2 and 3.75G si...
Hi, I update my Nokia 603 belle to FP2 then when its restarted just after Nokia logo my mobile restarted 3 time and turned off! Even when I turn it on the problem repeated again!! when I removed my 3.75G sim card it worked! how can I resolve this problem?!
before Update it working correctly!!
Have you tried with other 3.75G SIM?
I suggest you to turn off the phone, remove the battery and sim, clean the sim, wait for five minutes and put the sim back in and start the phone.
It should work fine.
If this doesn't work,
Use old 2G sim card, start the phone and in network settings, switch the network mode to gsm instead of dual or 3G.
Now remove your old sim and insert your 3.75G sim and turn on the phone and try switching mode back to 3G.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------
Similar Messages
-
Seriously!?! Serious problems with the customer support and AppleCare.
I have a macbook pro. I've had it since Aug 2007, so it's old, i get it. But I'm a poor starving student and I bought the computer with the idea that it was a quality product that would last me though my studies. However, it has been the shop for repairs literally, every year, often multiple times per year, since I bought it. Everything from DVD (twice failed, more than two visits), to hard drive failure, to replacing the motherboard. That's just what I remember. The thing is a lemon.
Fortunately I bought apple care, great idea right? It was for the first year or two. However over a year before AppleCare was set to expire it started having problems over heating, freezing, and subsequently giving me that scary roll down 'restart your computer immediately screen'. It gets so hot you can't set it on your lap - it burns. I repeatedly brought it into the shop for help (the flagship one on Regents Street in London), and they couldn't seem to do anything. When I explained time was of the essence because I wanted it covered under AppleCare, they seemed unbothered, it seeed they were clearly waiting for it to expire first. Dodgy.
During the appointments they couldn't seem to replicate the issue in the shop (it take about 30 minutes to an hour to really scorch, and seems to not be related to how hard the CPU works). And said because they could see it do it, they were not able to help. Really, in the whole history of apple, I'm the only one to have a computer over heat? Really? Instead, they sent me away asking me to come back later "when it starts doing it again". Okay, as I said, it always overheats, it just takes a while to start, so unless we sit together in quiet awkwardness waiting, and waiting, it's not going to happen. And as the appointments take about three days to get so it's not like I can just pop round when it starts to happen and say, feel, it's really hot now, will you please, for the love of God, find a solution now? And it's a bit of a walk to the store, and there are no internet cafe's near by for me to go heat it up at, so it's always going to cool before I arrive. Duh.
And why is the burden of proof on me? It's like they are insinuating that I just love popping round the apple store every few months, all the vain hope that I can have a ...free part?
Still I persevered, taking it in when the problem seemed to exacerbate, and making sure I used it a bit first to get it warmed up. All the while with the warranty getting closer and closer to expiration. Finally, we got it to do it in the shop. But for a fix, they just sprayed it with air, and told me to "see if that works". It didn't. And I ask you, why is it in no other visit, they could not have come to this ground breaking solution? Did they really have to feel it get hot to realize overheating may have something to do with a clogged fan?
I should also note that they then proceeded to put it back together wrong, and I was unable to open it because a misplaced screw caused it to lock shut. It took two days to get a new appointment to get it fixed, even when I called to explain that it was their error, and I really, really, needed my laptop.
Anyway, as I said, it didn't fix the problem. So I had to go back yet again, at this point I can't remember if I was still under applecare or if it had just expired. It doesn't matter, because, again, without being able to make it get hot on their own (even though they had case history where it was clear that it had, and this was not just in my imagination, and even more case history showing it had a history of instability), they couldn't offer me any solutions. All they could do, they said, was suggest that I leave it with them for "about a week" to check it over. A week!! Who goes without a computer for a week?!?! I'm not a student in 1985.
So now, I'm sitting here writing you am email from my laptop which is sitting on a towel in my lap to protect my thighs from mac burn. The warranty has now long passed, but the problem has now finally progressed to the point that it takes much less than 30 to reach scalding point, so I could prove it if there were any point. But there isn't, because now when I call the apple people, they assure me that it must be a hardware issue (and furthermore that the apple employees should have been able to tell me this over a year ago), and unless I want to buy parts there just isn't anything that they can do. Which leads me to my next point, if the problem started while under warranty, and you have documentation of this, why do I - a poor starving student - have to pay for this just because it took you, Apple, a year and half to finally figure out the problem?
So to recap, I decided to pay the exorbitant apple costs and make the switch from PC because I thought that the stability of the machines, the so touted excellent customer service, and the superior programs were worth the cost. And to be fair, the programs are fabulous, the apps integrate smoothly, and it starts up with a flash. Unfortunately I can't enjoy any of this with my laptop on my lap without risking burning through my pants. I can only enjoy these benefits for about 30 minutes before it starts freezing due to the heat. And, a few times a year I have to make multiple journeys to the apple store (which is, to be fair, really quite a nice store) to get the latest hardware problem fixed, which means I'm often without it for days to over a week at a time. All in all, it's not worth the money to me - one of those young, hip, cutting edge media types you are trying so hard to market to - until you can fix your customer service issues, put knowledgable people in positions to help, and have the internal support systems to get it done with at least enought efficiency to keep up with the technology demands of the modern world.It sounds as if this is coming back to Norton Security...
"LiveUpdate_solved" in "Norton 360"
The article by author "rab60" contains detailed instructions on the Live Update solution.
You might try a more thorough search of the Norton community forum... I do not use Norton and cannot comment on whether any of the solutions work.
Kind Regards,
Dragon-Fur -
IDEACENTRE A720 serious problem with noisy hdmi in and brightness control
First of all, excuse my English. (And after initial posting i recognized that i have selected the false category for this post, should be in "ideacentre"....)
A few days before i buyed a used VBT1YGE from Amazon Warehouse Deals. It was important to me to use the A720 as a external monitor for my Lenovo Notebook and my MacBook.
As soon as i connected the Notebook or MacBook with a HDMI-Cable (tried four different cables!) plugged in to HDMI in, there was an annoying noise.
Furthermore, if i adjust the brightness with plugged in HDMI-Cable, there was a new loud noise, it becomes louder by decreasing brightness. Sound works fine from the Lenovo Notebook through HDMI but there is always a noise and if i decrease brightness this results in louder noise.
If i use the VBT1YGE only as AIO PC, everything works fine, no noises.
As i said the VBT1YGE was used, so i thought it has a defect and i sent it back to Amazon.
Now i have buyed a new VDT2DGE from Lenovo Shop and i have exactly the same problems.
Please, is there any solution for this problem? If not, i will sent the VDT2DGE back in a few days...I am running Windows 8, which came with the system. I decided to "Remove everything and reinstall Windows" and this is the specs that I see now. Windows 8, Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz 2.50 GHz, 6.00 GB RAM, 64-bit Operating System, x64-based processor.
By chance I found out that if I force my screen to sit up right, by pushing the backbone of the screen backwards, the noise becomes smaller. I also now changed my refresh rate to 50Hz to make the noise a little bit lower in tone. I was hoping that this is fixable with an update with graphics card or with a lenovo diagnostic software, but I could not find anything online similar to it. The problem still exists, although now it is more acceptable. Still hope that it can be solved.
Thank you very much for replying!
Joey Ma -
Serious problems with latest update
Done the latest software updates and my phone is in a terrible starte!! Does not fully charge 80-85% onlyBattery last 2/3 hours before needing charging (sitting on my desk at work, not in use)Back of phone get really hot, even when not in use (never used to happen)Phone shuts down for no reason (either when sitting idal or inuse)Phone freezes (normally while inuse)Can't open all apps and then either freezes or shuts downCan't read SD cardLoaded every telephone number and email address I have ever sent an email to, into my contacts list and won't allow me to remove them.What I've done Charged phone over night while turned off (as other post recommend)Forced Stop most appsShut down and restarted phoneRe-installed appsFactory Reset and re-installed updatesStopped myself from smashing it with a hammer!!!It's that bad I've got my old iPhone out and using that!!! HELPPPPPPP before the hammer wins
Since upgrading to build 23.4.A.0.546 my phone has had a few serious issues that it has never had before. It could be related to my screen because I had to have a replacement fitted a few days before the update came out, but I can't be sure which is causing the problems. I mostly notice it in messaging apps (the default Messaging app, Facebook Messenger, InstaMessage and WhatsApp) but it happens in the Music app and Google Play as well. It looks like the app keeps refreshing itself, there is a very fast wiping and redrawing of the screen. If I'm in a messaging app it is very noticable because it causes the keyboard to disappear (I've tried a few different keyboards and the result is the same). *edit* It is far more pronounced in WhatsApp, which over the last 2 days has started acting like I am pressing the screen all over, opening menus, calling people, trying to take photos etc, all without me touching the screen at all! *edit* In the Music app and Google Play it makes opening the side bar menu almost impossible, because even before the side bar has slid out, the screen refreshes and it disappears. Can someone who knows tell me if all this refreshing could possibly be a screen related hardware issue, or is it software/firmware based? A colleague with a Z3 compact said he had noticed similar issues since the latest firmware update. Any help would be appreciated
-
Problems with Live Update 3 and Core Center
Hi All
I have just put together the system listed below. On the first boot-up screen "Live Update 2" is displayed on the top right of screen. I installed "Live Update 3" from the Drivers & Utilities CD supplied with the Mobo. On rebooting, the computer crashes straight after loading Windows. The problem occurs even after I downloaded the latest version.
I also installed Core Center from the same CD. This works fine until I try to switch user. It then comes up with the error "No Hardware Monitor Found" and crashes. The same thing happens after downloading the latest version.
What could be causing this?
Many thanks.Upgrade BIOS and see what happens...
-
MOVED: Serious problem with Asrock k7vt6 mobo and MSI fx5700le-td128!!!
This topic has been moved to VGA products.
https://forum-en.msi.com/index.php?topic=117270.0alathgr,
Downoad the latest VIA (KT600) chipset Hyperion driver from http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1070
Put the ATI card back in. Run the uninstall of the ATI card and run Driver Cleaner.
Install the VIA chipset driver.
Install the FX5700 card.
Install the nvidia VGA driver, its this one http://www.nvidia.com/object/winxp_175.16_whql.html -
Why Apple don't fix half year serious problem with HD3000 drivers, Lion and Adobe products? Doesn't Apple really care about advanced users?
I have Mac mini and Macbook Pro 13". Bouth with HD3000. And I can't work at all. With Snow Lepard I had no problems. It's tiny problem in code. And such pain for lots of users!If you have a problem with Adobe products, voice your issues with them.
It is the software developers responsibility to maintain compatability
with any operating system, beit OSX or Windows. -
I cant cant use mail merge feature in Winword in conjunction with Abobe Acrobat 10 (pdfmaker add-in) after the recent Office April Windows and Office Updates.
Here is a quick note from the event viewer:
The program WINWORD.EXE version 14.0.7134.5000 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1138
Start Time: 01d07dcede19c458
Termination Time: 15
Application Path: C:\Program (file:///C:/Program) Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Report Id:
Microsoft Word: Accepted Safe Mode action : Word experienced a serious problem with the 'acrobat pdfmaker office com addin' add-in. If you have seen this message multiple times, you should disable
this add-in and check to see if an update is available. Do you want to disable this add-in?.
I do not wish to disable the pdfmaker add-in as I use it to run mail merge on WORD and send 10s and 1000s of pdfs via email to external users. I am not sure what are my options here and I wish
someone could help me get to the root cause of the matter.
My environment is as follows:
Windows 7 x64 SP1
Office 2010 v 14.0.7128.5000
Adobe Reader MUI X and Adobe Acrobat X
FerozeHi,
As the event log indicated, this is due to acrobat pdfmaker office com addin doesn't work well with Microsoft Word.
I would suggest you go ahead and try to upgrade your Adobe product to the latest version and see if issue persists.
Or contact the support of Adobe and see if there is a known compatibility issue or not.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!
Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and -
Serious problems with Adobe and Mavericks 10.9.3
Serious problems with Adobe, crashes, no video export, video deteriorated by a line of pixels.
Video card error from when turning computer on. Overheat when exporting from Premiere or encoder.
Issues also with davinci resolve, output corrupted...
Anybody has a solution?The issue is now solved. I closed all open apps, and then tried once more to reinstall OS X after restart apple key + R and now everything is fine again.
TUVVH4 wrote:
TUVVH4 wrote:
I have an issue with the Mavericks 10.9.3 update. After restarting it didn't finish the update, but were just running with the grey Apple screen. I was forced to shot down, since my iMac got very hot. Then I needed to reload everything from my Timecapsule. I have tried several times, and everytime I needed to reload reload etc. from Timecapsule. After my lateste reload Safari, Time Machine and System Settings are missing and are replaced by a "?" i the program bar!!! Help anybody!
I have an issue with the Mavericks 10.9.3 update. After restarting it didn't finish the update, but were just running with the grey Apple screen. I was forced to shot down, since my iMac got very hot. Then I needed to reload everything from my Timecapsule. I have tried several times, and everytime I needed to reload reload etc. from Timecapsule. After my lateste reload Safari, Time Machine and System Settings are missing and are replaced by a "?" i the program bar!!! Help anybody! -
I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!
The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more. -
?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.
Error 1402 | Error 1406 | Acrobat, Reader
-
Dear Blackberry Authorities,
It is really a horrible experience with the handset of blackberry for me. I have purchased blackberry Curve handset 9300 on 22nd April from a "Phone Store”, Shop No.78,79,community centre, New friends colony, New Delhi, The Invoice No. is 319,The details of the handset are as follows:
Handset: Blackberry Curve 9300 1256-India Qwerty-Pink
Name: Blackberry 9300: ETA-716/2010/WRLO
Model: RDA71UW
It has been more than just three months ,when i purchased this handset ,It worked fine for about only fifty days from the date of purchase and from the second month ,to my shock, serious problem started in the handset and some time it was getting hanged ,sometime some keys in the keypad did not work ,some time it was getting hanged the moment I receive incoming call., sometime sms sending problem, some time some other problem ..Every time I used to switch off the phone and start again, then it used to work but after some days again there were some other problem occurring in the handset.
The phone was not getting connected to PC from the starting, and i have tried so many times but i fail to get success.
Many a times when I used t send sms the entire alphabet typed on sms has gone separately as a single alphabet in a particular sms to the recipient, causing embarrassment for me in my organization. I would blame the black berry for this embarrassment as this has caused due to faulty phone they have sold me,
I am service class person and i get occupied with my work at office in the day hours and doesn’t have time to go to the service centre of blackberry every time the problem occurs, as there are only one service centre available in Delhi at Lajpat Nagar.The service centre is about 20 Kilometers away from the area my office is situated, I managed to keep the phone running by switching off and switching on after one or two minutes, every time the problem occurs but in the first week of last month ,when the problem started continuing after switching off and switching on also ,I was bound to go to service centre at noida since it is close to my place (about 14 Km) in comparison of Lajpat nagar at new delhi,the service engineer at blackberry service centre saw my phone and said there is some software problem which can be rectified by reinstalling the software, and there are some hardware problem also (some keys on the keypad is not et. all working) ,for which i have to surrender my phone to them and they will send it to the Blackberry Office (they did not give address) and it would take 15 days at least ,thus since I had no back up phone and my each and every contact no. was there in phone it was difficult for me to give them handset at that time ,so I requested them to rectify the software problem by re installing the same.
I asked the service manager to get the backup of all the data and contact no saved into the phone, but they refused to do so and they asked me to go to some other shop nearby to get the data backup, I went to that shop and they asked 250 Rupees for data backup of my phone. I was bound to say yes to them for the amount the charge for backup .I gave them my handset and after 20-30 minutes they came back to me by saying, we cannot store your data backup as it is not connecting to PC. It was a highly disappointing reply for me.
Then i again went to your service centre and written down some important contact no.(the number which was stored on phone book) on piece of paper and taken out my SD card ,and gave them handset for re installing the same.
They gave me my handset after one and half hour and said" now it would work fine except hardware problem.".I came back and to my utter shock again after two three days handset was into its old condition ,then also I tried to manage with handset and when i could spare sometime I went to your service centre again on 24th July at Noida,
they took the phone and said it would take 12-15 days to return the handset after rectifying the problem,when i requested them to change the handset with a new handset which is at least in good working condition , they clarified that if the hardware problem is not manageable or repairable ,i would get new handset had no option except to give them handset for rectifying the problem.
Now,It is the time for a biggest shock from blackberry people-Today on 3rd August ,i have received a call from noida blackberry service centre to inform me that my handset cannot get repaired under standard warranty conditions of blackberry as there are some moisture into the phone and there is no warranty if there is a moisture inside the phone.
Thus now i wish to inform all the concerned ,Blackberry/Research in Motion ,managers/authorities ,that i have explained above ,all the things ,happened to me in last three months of my purchase of handset, in detail ,so i would again request to Blackberry/Research in Motion ,managers/authorities, to rectify the problem of my handset or change the entire handset so that I can use the same peacefully and should not roam around the service center of blackberry.
Giving this lame excuse that "there is a moisture inside the handset and thus it can’t get repaired or changed under warranty " is a clear case of cheating and harassing the customer, I have bought the handset to use it for my communication purpose not to roam around the blackberry service center nor to put water or moisture inside the handset and play with the handset and fight with all of you.
If there were some moisture inside the handset then that should have been seen by the noida service centre people also during my First visit itself by them and they would have refused taking the handset for repair. They did not refuse but accepted handset and reinstalled software also, If there was some moisture that would have been seen by them that time only.
In my second visit also the took my phone and seen the inside condition also of handset in front of me ,they did not see any moisture, that time also ,and now after 10 odd days ,there are some moisture inside the phone??????.
I have no idea how blackberry keeps its handset ,which has come to them for repairing ,but if there is any trace of moisture into my handset ,that would have come into the handset ,during these 10 days only when phone was with blackberry authorized service engineers for repair purpose. What I know is that My Blackberry handset is under warranty and it is not working properly thus it should be replaced by Blackberry.
On the keypad if some key are not working that is a hardware problem which was there in the handset and it has no connection with the moisture.
If this is the way blackberry is treating its customer, i would say it is harassing its customer, and does not want to rectify the problem .in this case, I would have no option left except to go to the consumer court in Indian judiciary system. And moreover i would inform my and other friends, organizational employee also not to use services/or buy blackberry handset if this is the way BB is treating its customer.
I would request all the concerned persons/managers/authorities of Blackberry/Research in Motion, take action into my case urgently and rectify the core problem into my handset instead of giving lame excuses, and change the faulty handset of mine with a new properly working handset under warranty condition.
Best Regards
Asim
Edit: Personal information removed. At no time should you provide any personal information to any other community member. Please review the Community Terms & Conditions and Support Community Guidelines for additional information.dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Help me please : Serious problems with collection-mapping, list-mapping and map-mappi
Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.Have you tried a restore in iTunes?
-
Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.
how can i find out what the fix is that works..please
Maybe you are looking for
-
No email recipient selection when sending an alarm notification in iCal
Hi! I apologize if this question has been previously asked within this forum but a user here in the office is experiencing a particular problem with email alarm notifications in iCal 3.0.8. This particular user is using version 3.0.8 of iCal and has
-
Is it possible to create hyperlink in java. If so please give me some suggestions
-
It says i have arrer when i restore my ipod wat do i do
i need to restore my ipod touch and when i do it says there is an erra
-
Thinkpad W520 WEI processor sub-score only 4.6
Thinkpad W520 WEI processor sub-score only 4.6 Running a Core i7-2720QM CPU @ 2.20GHz with the latest BIOS - v1.33, power set to maximum turbo. Any thoughts? Other scores: Memory (RAM) 12.0 GB 7.1 Graphics Intel(R) HD Graphics Family
-
How to use SNRO to create daily number range?
Dear all, I would like to know how to use SNRO to create a daily number range. We would like to have the following sequence. The first 8 digits are date and the last 2 digits are number sequence. Each day, the last 2 digits will start from 01 again.