Server 2008 (64); arp, netsh are not working

Hello,
Not sure I'm in the right forum but I did not find a more suitable one.
My server is running windows server 2008 (64) and has
6 Ethernet cards. Using CMD window I have to manually add an arp entry in the arp table with:
arp -s 192.168.2.1 aa-bb-cc-dd-ee-ff
I have only one Ethernet card (out of 6) that has a the following IP address: 192.168.1.3
So I expect arp to add the above entry to arp table of this card.
But if I enter arp -a, it seems the entry is added to another card
which is configured to get IP from DHCP server. I do not have DHCP server so the IP is 169.??.??.??
I also tried :
netsh -c interface ipv4 add neighbors “Network Card Name” “IP Address” “MAC Address”
But this did not add the entry also.
I tried the same on another machine (different hardware) with the same O.S and it worked fine.
Can you help ?
Best regards,
Z.V

Hi Dennis,
Based on your description, I understand that you configure redirected folder via Group Policy. If anything
I misunderstand, please don’t hesitate to let me know.
Please logon the problematic computer by using that user who was redirected My Documents folder, then run
gpupdate /force command and monitor the result.
à
Is there a registry change I can make to redirect the path from the local C' to the UNC path?
Please type
regedit in Run to open Registry Editor and follow the path:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal
HKEY_CURRENT_USER \Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Personal
Please check if Value data was set to correct path.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

Server side mailrules are not working!

Hi,
on my Lion Server the server side mailrules are not working.
I created about 4 different rules via the webmail interface but none of them are applied to incoming mails :-/
They were working back in the days I used 10.5 and 10.6 Server (this was not upgraded!).
Are server side mailrules are working for you?
Any assistance would be appreciated.
Regards,
Eldrik

Nevermind... got it sorted out..
My rules are based on the senders email address and switching from "is equal" to "contains" (sorry only got the translation from German) did the trick!
Greetz
Eldrik

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

Page Break In XML Publisher RTF Templates Are Not Working

Please refer to the Metalink Doc below:
Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
Doc ID:      559111.1
Type:      PROBLEM
Modified Date:      24-MAR-2008
Status:      MODERATED
In this Document
Symptoms
Cause
Solution
References
This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
Applies to:
Oracle XML Publisher - Version: 5.6.3
This problem can occur on any platform.
Symptoms
Using XML Publisher version 5.6.3 in 11.5.10.
Find <?split-by-page-break:?> syntax is ignored.
EXPECTED BEHAVIOR
Expect page breaks to occur at point set by "split-by-page-break:" code.
STEPS
The issue can be reproduced at will with the following steps:
1. Create a template.
2. Call split-by-page-break: inside a loop.
3. Output is not formatted correctly, page break call is ignored,
Cause
Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
Fix is in ScalableStringList.java version 115.4.
This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
Solution
To implement the solution, please execute the following steps:
1. Apply Patch 6165466 when it is released.
2. Test your report.
References
Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
Keywords
XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
Help us improve our service. Please email us your comments for this document. .

Hi JDev,
Check this out:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Hope this might help.
Thanks

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Formula Columns are not working in Reports 10g

Hi,
We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
Please, someone help us in this regard.
Thanks & Rgds,
M T

What version of Reports do you use..???
Greetings...

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

Case statement and Decode function both are not working in Select cursor.

I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. On the other hand both the things work in just select statement.
See the first column in select (PAR_FLAG), I need to have this evaluated along with other fields. Can you please suggest some thing to make this work. And also I would like to
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Author : Amit Juneja
Date : 06/20/2011
Description:
Updates the Diamond MEMBER_MASTER table with the values from
INC.MEM_NJ_HN_MEMBER_XREF table.
declare
rec_cnt number(12) := 0;
commit_cnt number(4) := 0;
cursor select_cur is
Select DECODE(1,
(Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY'))),
'Y',
'N') PAR_FLAG,
H.SEQ_ELIG_HIST,
H.SEQ_MEMB_ID,
H.SEQ_SUBS_ID,
H.SUBSCRIBER_ID,
H.PERSON_NUMBER,
H.EFFECTIVE_DATE,
H.TERM_DATE,
H.TERM_REASON,
H.RELATIONSHIP_CODE,
H.SEQ_GROUP_ID,
H.PLAN_CODE,
H.LINE_OF_BUSINESS,
H.RIDER_CODE_1,
H.RIDER_CODE_2,
H.RIDER_CODE_3,
H.RIDER_CODE_4,
H.RIDER_CODE_5,
H.RIDER_CODE_6,
H.RIDER_CODE_7,
H.RIDER_CODE_8,
H.MEDICARE_STATUS_FLG,
H.OTHER_STATUS_FLAG,
H.HIRE_DATE,
H.ELIG_STATUS,
H.PREM_OVERRIDE_STEP,
H.PREM_OVERRIDE_AMT,
H.PREM_OVERRIDE_CODE,
H.SEQ_PROV_ID,
H.IPA_ID,
H.PANEL_ID,
H.SEQ_PROV_2_ID,
H.SECURITY_CODE,
H.INSERT_DATETIME,
H.INSERT_USER,
H.INSERT_PROCESS,
H.UPDATE_DATETIME,
H.UPDATE_USER,
H.UPDATE_PROCESS,
H.USER_DEFINED_1,
H.SALARY,
H.PEC_END_DATE,
H.REASON_CODE,
H.PEC_WAIVED,
H.BILL_EFFECTIVE_FROM_DATE,
H.BILLED_THRU_DATE,
H.PAID_THRU_DATE,
H.SUBSC_DEPT,
H.SUBSC_LOCATION,
H.USE_EFT_FLG,
H.BENEFIT_START_DATE,
H.SEQ_ENROLLMENT_RULE,
H.MCARE_RISK_ACCRETION_DATE,
H.MCARE_RISK_DELETION_DATE,
H.MCARE_RISK_REFUSED_DATE,
H.COMMENTS,
H.USER_DEFINED_2,
H.USER_DEFINED_3,
H.RATE_TYPE,
H.PCPAA_OCCURRED,
H.PRIVACY_ON,
H.PCP_CHANGE_REASON,
H.SITE_CODE,
H.SEQ_SITE_ADDRESS_ID,
PM.seq_prov_id rendered_prov
from hsd_member_elig_history H,
INC.PCP_REASSIGN_RPRT_DATA P,
hsd_prov_master PM
where P.subscriber_id = H.subscriber_id
and P.rendered_pcp = PM.provider_ID
and H.elig_status = 'Y'
and (H.term_date is NULL or H.term_date >= last_day(sysdate))
order by H.Seq_memb_id;
begin
for C in select_cur loop
rec_cnt := rec_cnt + 1;
update hsd_member_elig_history
set term_date = TRUNC(SYSDATE - 1),
term_reason = 'PCPTR',
update_datetime = SYSDATE,
update_user = USER,
update_process = 'TD33615'
where seq_elig_hist = C.seq_elig_hist
and seq_memb_id = C.seq_memb_id;
INSERT INTO HSD_MEMBER_ELIG_HISTORY
(SEQ_ELIG_HIST,
SEQ_MEMB_ID,
SEQ_SUBS_ID,
SUBSCRIBER_ID,
PERSON_NUMBER,
EFFECTIVE_DATE,
TERM_DATE,
TERM_REASON,
RELATIONSHIP_CODE,
SEQ_GROUP_ID,
PLAN_CODE,
LINE_OF_BUSINESS,
RIDER_CODE_1,
RIDER_CODE_2,
RIDER_CODE_3,
RIDER_CODE_4,
RIDER_CODE_5,
RIDER_CODE_6,
RIDER_CODE_7,
RIDER_CODE_8,
MEDICARE_STATUS_FLG,
OTHER_STATUS_FLAG,
HIRE_DATE,
ELIG_STATUS,
PREM_OVERRIDE_STEP,
PREM_OVERRIDE_AMT,
PREM_OVERRIDE_CODE,
SEQ_PROV_ID,
IPA_ID,
PANEL_ID,
SEQ_PROV_2_ID,
SECURITY_CODE,
INSERT_DATETIME,
INSERT_USER,
INSERT_PROCESS,
UPDATE_DATETIME,
UPDATE_USER,
UPDATE_PROCESS,
USER_DEFINED_1,
SALARY,
PEC_END_DATE,
REASON_CODE,
PEC_WAIVED,
BILL_EFFECTIVE_FROM_DATE,
BILLED_THRU_DATE,
PAID_THRU_DATE,
SUBSC_DEPT,
SUBSC_LOCATION,
USE_EFT_FLG,
BENEFIT_START_DATE,
SEQ_ENROLLMENT_RULE,
MCARE_RISK_ACCRETION_DATE,
MCARE_RISK_DELETION_DATE,
MCARE_RISK_REFUSED_DATE,
COMMENTS,
USER_DEFINED_2,
USER_DEFINED_3,
RATE_TYPE,
PCPAA_OCCURRED,
PRIVACY_ON,
PCP_CHANGE_REASON,
SITE_CODE,
SEQ_SITE_ADDRESS_ID)
values
(hsd_seq_elig_hist.nextval,
C.SEQ_MEMB_ID,
C.SEQ_SUBS_ID,
C.SUBSCRIBER_ID,
C.PERSON_NUMBER,
trunc(SYSDATE),
C.TERM_DATE,
C.TERM_REASON,
C.RELATIONSHIP_CODE,
C.SEQ_GROUP_ID,
C.PLAN_CODE,
C.LINE_OF_BUSINESS,
C.RIDER_CODE_1,
C.RIDER_CODE_2,
C.RIDER_CODE_3,
C.RIDER_CODE_4,
C.RIDER_CODE_5,
C.RIDER_CODE_6,
C.RIDER_CODE_7,
C.RIDER_CODE_8,
C.MEDICARE_STATUS_FLG,
C.OTHER_STATUS_FLAG,
C.HIRE_DATE,
C.ELIG_STATUS,
C.PREM_OVERRIDE_STEP,
C.PREM_OVERRIDE_AMT,
C.PREM_OVERRIDE_CODE,
C.SEQ_PROV_ID,
C.IPA_ID,
C.PANEL_ID,
C.SEQ_PROV_2_ID,
C.SECURITY_CODE,
SYSDATE,
USER,
'TD33615',
SYSDATE,
USER,
'TD33615',
C.USER_DEFINED_1,
C.SALARY,
C.PEC_END_DATE,
C.REASON_CODE,
C.PEC_WAIVED,
C.BILL_EFFECTIVE_FROM_DATE,
C.BILLED_THRU_DATE,
C.PAID_THRU_DATE,
C.SUBSC_DEPT,
C.SUBSC_LOCATION,
C.USE_EFT_FLG,
C.BENEFIT_START_DATE,
C.SEQ_ENROLLMENT_RULE,
C.MCARE_RISK_ACCRETION_DATE,
C.MCARE_RISK_DELETION_DATE,
C.MCARE_RISK_REFUSED_DATE,
C.COMMENTS,
C.USER_DEFINED_2,
C.USER_DEFINED_3,
C.RATE_TYPE,
C.PCPAA_OCCURRED,
C.PRIVACY_ON,
C.PCP_CHANGE_REASON,
C.SITE_CODE,
C.SEQ_SITE_ADDRESS_ID);
commit_cnt := commit_cnt + 1;
if (commit_cnt = 1000) then
dbms_output.put_line('Committed updates for 1000 records.');
commit;
commit_cnt := 0;
end if;
end loop;
commit;
dbms_output.put_line('Total number of MEMBER_ELIG_HISTROY records inserted : ' ||
rec_cnt);
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
end;

user10305724 wrote:
I have tried both the Case statement and Decode function in Select cursor, but both the things are not working. Please define what you mean by not working even if your computer screen is near the internet we can't see it.
You should also look at the FAQ about how to ask a question
SQL and PL/SQL FAQ
Particularly *9) Formatting with {noformat}{noformat} Tags* and posting your version.
know the reason why decode is not working, I heard some where Case statement do not work with 8i.
Does this mean you are using 8i? Then scalar sub queries - selects within the select list, are not supported, along with CASE in PL/SQL.
Select DECODE(1,
* (Select 1
from hsd_prov_contract R
where R.seq_prov_id = PM.seq_prov_id
and R.line_of_business = H.line_of_business
and R.PCP_FLAG = 'Y'
and R.participation_flag = 'P'
and SYSDATE between R.EFFECTIVE_DATE AND
NVL(R.TERM_DATE,
TO_DATE('31-DEC-9999', 'DD-MON-YYYY')))*,
'Y',
'N') PAR_FLAG,
>
exception
when others then
raise_application_error(-20001,
'An error was encountered - ' || sqlcode ||
' -error- ' || sqlerrm);
http://tkyte.blogspot.com/2008/01/why-do-people-do-this.html

"Validation" enabled for the composite and my testsuites are not working

I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Some of the services of ITS 640 are not working

Hi All,
I have implemented SAP NW 04 SR 1 Portal and integrated SRM 4.0(EBP 5.0).I have also implemented Business Package for mySAP SRM 4.0 60.2.
I am using internal ITS for HTML GUI.
Some of the iviews of the business packages are working but some of them are not.
I am getting an error message
"The URL http://g4kwas642.corp.rwdtech.com:8050/sap/bc/gui/sap/its/bbpsc05/! was not called due to an error.
Note
The following error text was processed in the system SRM : Attribute for user PBHONDELE contains errors. Inform system admin.
The error occurred on the application server g4kwas642_SRM_50 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS"
I have published all the services that are under SICF.
I had also published all the services using w3_publish_services and siac_publish_all_int.
It says that all the services are succesfully published.
When I go to SICf to test the service,some of them are not working.
Can you guys tell me what are the steps that I am missing?
Thanks,
Paritosh

I am also getting the same th_res_free error..
I have installed nw04 sr1 and trying to run ESS on it.
My problem is, i have installed sap WAS 6.4 on different machine and R/3 on different machine..
So now.. where i have WAS.. does not have all the services. All services are there on R/3 server..
Now how do i publish the services on WAS 6.4??
Coz that option to publish on INTERNAL site is not coming on my R/3 (4.7) as it does not have WAS 6.4.. its on different machine.
Please tell me what can be done in this case.
I cant create a R/3 transaction iView using webgui because of this. my Web gui service on WAS 6.4 runs fine whne i test it in SICF .. but not in Iview..
Please help me out .. i dont want to install a ITS on another machine which is simple solution..

Oracle 9iAS R2 - reports are not working - JSP Error

dear All
We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
==============
500 Internal Server Error
OracleJSP:
JSP Error:
Request URI:/repdemo/examples/Tools/test.jsp
Exception:
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
     at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
     at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
     at oracle.reports.definition.RWReport.done(RWReport.java:1087)
     at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
     at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
     at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
     at examples.tools._test._jspService(_test.java:292)
     [SRC:/examples/Tools/test.jsp]
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
-=================
please help to resolve this issue.
thanks in advance.
regards

Dear All
Just to share the solution of the problem.
We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
regards

Umlauts are not working in faxes

Hello,
I´m using a smartform to create a customer letter. Normally, I´m converting the output-otf to PDF and send it as attachement by email.
But in one case, I have to send the smartform output-otf as fax. For that I have used the function "CONVERT_OTF_AND_FAX".
Generally, it´s working. but in the fax, the umlauts are not working! In my PDF´s of the same smartform, I can see all umlauts correct!
Does anybody know how to solve that problem?
Regards Michael

Nobody has an idea?
Hmmm, I have to fix that problem tomorrow and don´t know what to do! Maybe it is something like a codepage problem with the fax-server?
I don´t think, that I have to set any special parameter when I call the CONVERT_OTF_AND_FAX function.
The strange thing is, when I use the same table with otf data and convert it to PDF, it´s working with all country specific special characters...
Thank you for Your help!
Regards Michael

Charts are not working in Multiple Presentation Services environment.

Hi ,
I have implemented multiple presentation services enviornment bu follwoing this blog: http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/. It was successfully implemented but charts are not working for any of the Presentation instyance.
Kindly help us in providing the solution for this issue.
Thanks,
Jaishree

thats true , but to how enable the Java host services as its not getting started from the Service Panel>Oracle Java Host Services.

Server 2008 (64); arp, netsh are not working

Similar Messages

Maybe you are looking for