Server 2012 freezes during setup at the "installing updates" step

I'm trying to install server 2012 standard on an IBM blade HS22V "7871". Server has SAN attached storage. Server freezes during installation setup at the "installing updates" step. I have tried install booting off of
a USB drive and DVD drive with the same results.

Im unable to boot in safemode because windows has not completed the OS install. The install is stuck in the setup at the installing updates step. It will sit there for days or until you crash the server. This is what I have done so far:
installed 2008r2 on the same LUN/SAN without issue
Updated Blade to the latest BIOS/Firmware.
Using the most current IBM ServerGuide "9.51" for hardware drivers.
Attempted install in both UEFI and Legacy mode
Attempted 3 separate install medias "cd and usb"made from ISO not cd copy
Verified we only have 1 LUN 1 Volume Group and 1 Path
Attempted 4 different blades and 3 different chassis. Same results.
We have a HP/3Par T400 SAN that I can successfully install server 2012 on. This is our old Test SAN. We have our new 3par 7400 SAN that is now our production SAN that we are unable to build server2012 on.

Similar Messages

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

SQL 2012 sp1 EE setup disappears when installing Setup Support files ( Error: sqm does not have active session)

HI Folks,
WIndows : 2008 R2
SQL : 2012 sp1 EE
Setup disappears when installing setup support files On passiive node ( 2 node cluster), sql is runing on active node without any issue
Error : SQM does not active session ( In summary detail txt file)
blog is suggesting . Save the following in a .reg file and merge to populate the registry: (
here i am confusing how to save and where to save , how to merge and how to populate)
http://blogs.msdn.com/b/sqljourney/archive/2012/05/07/sql-2008-2008-r2-setup-disappears-fails-when-installing-setup-support-files.aspx
Can you share your views, if you need any information for clarification. pls let us know for resolution.
Thanks in Advance.

Sorry but there is already released SP2 for SQL Server 2012. Start installation on the passive node first
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Exchange 2013 Windows Server 2012 NLB and DAG on the same server

Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

Windows Server 2012 - Direct Access clients and the Windows 8 firewall

Hi,
We're running a simple proof-of-concept for Server 2012 Direct Access, we have a single DA server behind a firewall using NAT. We have a number of client devices setup for DA and running Windows 8.
Our issue is that we can only get the Windows 8 direct access clients to connect (when outside the corporate network) and work with the windows firewall disabled (public network profile).
With the windows firewall disabled everything works exactly as expected. When outside the corporate network the client detects the network state (public network profile), connects via DA and all internal resources can be accessed successfully...fantastic.
Is there some specific guidance on manually configuring the windows 8 firewall for Direct Access ? We've tried the obvious TCP:443 with edge traversal enabled but without success.
Much of the information we have found relates to UAG rather than Windows 2012 DA.
Any assistance is appreciated.

Hi,
There isn’t any specific configuration on the firewall.
Just confirm that port 443 can be forwarded to DirectAccess server.
Of course, make sure you are using IPsec first.
Check the links:
STEP 6: Test DirectAccess Client Connectivity from Behind a NAT Device
http://technet.microsoft.com/en-us/library/hh831524.aspx#TeredoCLIENT1
DirectAccess for Windows Server 2012 Installation & Configuration Guide
http://syscomlab.blog.com/2012/09/directaccess-for-windows-server-2012-guide/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server 2012 AlwaysOn for Multi-subnet geographical HA solution steps -- NON-Shared storage,standalone servers

1.Can any one provide the detailed steps for multi-subnet HA for Always ON Groups.
--SQL Server 2012 AlwaysOn for Multi-subnet geographical HA solution steps
2.Do we need VLAN or not for SQL Server 2012 on win 2012 ? provide details for this VLAN required or not.
--I read MS links, sql server 2012 and above VLAN not required.
Env:
SQL Server 2012
Windows 2012 R2(2 servers different location)
Non-Shared storage (stand-alone servers)
Always ON Availability Group
I have seen white papers,but did not have detail step by steps.
Thanks

Hi SQLDBA321,
As your post, SQL Server 2012 or higher version has removed that requirement of virtual local area network (VLAN). For more details, please review this similar blog:
What you need for a Multi Subnet Configuration for AlwaysOn FCI in SQL Server 2012.
And you can perform the steps in the following similar blog to set up an AlwaysOn Availability Group with multiple subnets.
http://www.patrickkeisler.com/2013/07/setup-availability-group-with-multiple.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Error installing Office 2013 on Server 2012 R2 RDS - Error 25004: the product key you entered cannot be used on this machine

Hi there,
I really hope someone can help me as I am tearing my hair out trying to get this resolved!
I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
likely due to previous Office 2013 trials being installed on the system."
In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
Where or what file does the installer look at to see that a previous version was installed?
I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
Really really appreciate anyone that can help me on this,
Thanks

Hi,
I have definitely heard your frustration, and I’ll try my best to help you.
Since Office 2010 installed on it before, you need to remove Office 2010 completely.
KB about this error:
http://support2.microsoft.com/kb/2792178
A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

RDL Reports are not working after installing SQL Server 2012 Service Pack 2 in the SharePoint integration Mode

I am using Reporting Service Integration mode with SharePoint. SSRS is installed on separated machine of SharePoint stacks in Integration Mode. Everything was working properly and I could create/edit/modify RDL reports(parameters, Datasource, Subscription)
inside SharePoint and Document Libraries.
But after installing SQL Server 2012 Service Pack 2, on opening RDL reports inside SharePoint I receive this error message.
The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation
I should mention that SSRS is installed in the SharePoint integration Mode and there is no SSRS management console.

Hi Hedayat-Abedijoo,
According to your description, you are using Reporting Services in SharePoint Integrated mode, and everything worked fine before you install SQL Server 2012 Service Pack 2. After the package is installed, when you open RDL reports, the error occurred: The
permissions granted to user 'i:0#.f|membership|username' are insufficient for performing this operation.
According to my search, there may be two reasons for the problem:
This is caused when the application pool account that runs the SharePoint Web application you are on in IIS and the application pool account that SharePoint believes is running the site differ. This happens if the application pool account is changed directly
in IIS instead of through SharePoint (using the approved method).
This error can be caused when Kerberos authentication has been set up correctly and delegation in a double hop scenario will succeed, but Reporting Services integration has been set up for Trusted Account rather than Windows Authentication. This causes
SharePoint to continue to impersonate the logged-on user when contacting Reporting Services; when Reporting Services compares the application pool account to the user account making the request, they are not equal.
In this case, we can solve the problem by changing the application pool account in IIS back to the previous account and set AuthenticationTypes to RSWindowsNTLM only. For detail information, please refer to 8.3 “The permissions granted to user 'Domain\User'
are insufficient for performing this operation” in the document:http://msdn.microsoft.com/en-us/library/ee384252(SQL.100).aspx
If you have any questions, please feel free to let me know.
Thanks,
Wendy Fu

Microsoft // Winlogon 4005 (The Windows logon process has unexpectedly terminated) on one Windows Server 2012 VM with working RDS roles installed

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here?

Server 2012 CDP PKI Setup on Subordinate CA - Active Directory Certificate Services could not create an encryption certificate

Hi,
When I check pkiview.msc on my 2012 Subordinate CA I get the error shown in the first picture below. I'm also getting errors similar to below in the event log:
"Active Directory Certificate Services could not create an encryption certificate. Requested by contoso\admin1. The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613 CRYPT_E_REVOCATION_OFFLINE)."
I'm assisting in setting up a 2 tier PKI infrastructure using Windows 2012. The root CA looks good, but we're getting errors on the subordinate. The server was working, but we discovered that the server would only issue certificates with a maximum of a 1
year expiry date - obviously no good, so we decided to run through the following commands on the root CA (as recommended byhttp://www.techieshelp.com/subordinate-ca-increase-certificate-validity/)
certutil -setreg ca\ValidityPeriodunits "Years"
certutil -setreg ca\ValidityPeriod "5"
restarted AD certificate services on the root and subordinate CA.Then did the following on the subordinate CA:
1.On the Subordinate CA create a new CA request by right clicking the server in ADCS and select New Request.
2.Supplied the original request file from the subordinate CA (I couldn't find a way of generating a new request file)
3.Issued the certificate using the Root CA.
4.On the Subordinate CA ADCS installed new CA cert.
However, I keep on getting CDP or AIA errors on my subordinate CA.Also I'm missing a CDP field value when I look at the certificate listed in the personal and trusted certification authority store on my subordinate CA.
In addition, when I look at my CDP locations in Certificate Authority, I see a lot of CDPs, but I'm not sure if I need them all - I suspect I could just get away with LDAP, the C:\windows path and a single http:// path.
I've tried renewing the existing certificate and CRL on my subordinate CA, but that didn't work either.
Please advise.
Thanks

Ok, the process to renew the subordinate CA is incorrect. Once the registry setting to change the validity period was made on the root CA, the root CA ADCS service needs to be restarted. That is the only time those keys are read. Then:
1) On the subordinate CA, open the CA tool, right click the CA and select Renew CA Certificate. You can use the same key, no need to create a new one. It will create a NEW certificate request file
2) Copy that to the Root CA and submit like you would have done during the initial install
3) Approve the request and export the issued certificate
4) On the subordinate CA, in the CA tool, right click the CA and choose Install CA Certificate.
You can not reuse request files.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

SQL Server 2012 Evaluation (x64 bit) does not install

Hi
I downloaded the following files from the site:
http://www.microsoft.com/download/en/details.aspx?id=29066
SQLFULL_x64_ENU_Core.box
SQLFULL_x64_ENU_Install.exe
SQLFULL_x64_ENU_Lang.box
i have double-clicking the executable to SQLFULL_x64_ENU_Install.exe ,i got error popup box as below
popup box name :Unloading the box
error message:The application cannot find one of its required files,possibly it was unable to create it in the folder.please make sure that
the folder in which application was downloaded is accessible and not read-only
os : windows 7 home basic
i am the adminstator in the machine and tried to copy the files to diffeent drives and click the exe
but still its stays same error message
can some one please suggest on next steps
Thanks

Hi sai sudeep,
I know that you have downloaded the SQL Server 2012, but it wasn’t successful because the entire application contains more files and folders and not just three files (setup.exe, .box files). So, as Alberto Morillo said, you could download an ISO file for installing.
Please pay attention to that a Service Pack 1 or higher is required on windows 7 for installing the SQL Server 2012.
please refer to:
Download Windows 7 Service Pack 1:
http://www.microsoft.com/en-us/download/details.aspx?id=5842 .
Hardware and Software Requirements for Installing SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx.
How to install SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143219.aspx.
Regards,
Amy Peng
Please remember to click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Server 2012 R2 RDS- Only want the Session Host, Connection Broker and Licensing Server!

Hi all,
Wondering if anyone has experience with implementing Remote Desktop Services (RDS) on Windows Server 2012 R2.
I am doing an RDS design for a platform where we only need an RDS Session Host, Licensing Server and Connection Broker. We do not need web access as these servers will simply be jump boxes internally!
However, implementing this correctly in our test environment has proved to be tricky. The options are:
Use the Server Manager and do a traditional install via Roles and Features ( specifically add the Session Host, Licensing Server and Connection Broker). The installation process seems to go through ok in this scenario but when I head over to the Remote
Desktop Services section of the Server Manager I simply get the message 'An RDS Deployment does not exist in the server pool. To create a deployment head to Roles and Features'.
Use the specific ‘Remote Desktop Services installation’ option on the Server Manager and do a Session Based Desktop deployment and Quick Start. This installation process seems to go through correctly and the Remote Desktop Section seems to be working
correctly via the Server Manager. However this process is ‘hard locked’ i.e. it installs the session host, web access and connection broker. I can then remove the web access component later from Roles/ Features.
Is there a best practice (if any) for installation? i.e. Will there be any issues down the line if I remove RDS Web Access from my server while following method 2?
There is a complete lack of documentation from Microsoft here so not sure what to do! Just need a basic RDS session based deployment.

Hi,
As I know from server 2012\R2 the best deployment skill is to perform via “Remote Desktop Services” installation mode with Standard deployment and don’t let single role to install. Because when we install through RDS mode, there are specific extra tools and
services activated along with that deployment which you can’t find with single role installation. And that is for sure, when we install RDS role as of this, by default we will get install RDCB, RDSH and RDWA role installed.
Sorry don’t have any option to try to remove that role as that role basically needed for RemoteApp and Desktop purpose. But if you want then you can try it with help of “Remove-RDServer”Powershell command.
https://technet.microsoft.com/en-us/library/jj215506.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Server 2012 (not R2) RODC fails to install Windows Updates

Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8gen

The error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected]

SCORM (flash Player Content) not working on Windows Server 2012 R2 which has IE11 integrated installed on it.

Hi Everyone,
I have website which contains SCORM package, installed on Windows Server 2012 R2 which has IE11 installed on it.
Flash Player is also embedded with IE.
IE Version: 11.0.9600.17278.
Updated Version: 11.0.12 (KB2977629)
When I launch SCORM (flash Player Content) from my application, it is not working. It just displays a blank page however the Title of IE is set to the text from the SCORM content.
However if I access the same URL from any other machine which has previous version of Windows OS (i.e. previous to Windows 8 OS), it is working as expected on IE9, IE10 and IE11.
While trying to find out the cause, I came across some forum which says we have to install the “Desktop Experience” on the server to enable the inbuilt flash player. After doing that also, My SCORM contents are not getting displayed.
To find out more details, I have uploaded the SCORM Package on SCORM Cloud to check if it is working there. Here again the same problem, it doesn’t work and displays
error message saying that “Member is not found” and when I tried to find out the location of the error then it is coming at
Windows.document.myFlash.setVariable(…) method on the Windows Server 2012 R2 with IE11.
When I performed “Addwatch”, it is saying that Windows.document.myFlash doesn’t have setVariable(…) method.
However if access the same cloud URL from other machine (Having OS previous to Windows 8 OS), it is working as expected.
I have attached the screenshot of the error.
Any help would be appreciated.
Thanks

Hello,
I'd ask the SCORM package provider or in Microsoft's ASP.Net forums:
http://forums.asp.net/
As Microsoft's ASP.Net forums are on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Server 2012 freezes during setup at the "installing updates" step

Similar Messages

Maybe you are looking for