Server Group

In SM14 under the TAB Server groups, how does SAP use this information with regrads to updates?
We have 18 servers, one of which is the DIA UPD ENQ BTC SPO ther rest are DIA UPD BTS and UP2. 8 servers including the one with the ENQ are listed in a Server group and 10 application servers are not assigned.
How does and will SAP use this configuration for updates and other reasons?

Hi,
the purpose of update groups is described in [SAP documentation|http://help.sap.com/saphelp_nw04/helpdata/en/e5/de872335cd11d3acb00000e83539c3/frameset.htm] which can be easily searched using search box on SDN (top right corner).
Cheers

Similar Messages

Executing a Job via Web Services using a Server Group?

When executing a job from Designer or from the Management Console you have the option to select a specific job server or a server group.
But when executing a job via Web Services it uses the first job server with which the repository was associated (i.e. the first job server listed in AL_MACHINE_INFO).
Is there a way to get the job to execute using a server group instead simply choosing the first job server in the list?
Note: We are using FIM to execute the jobs via web services and don't have access to additional parameters.

Joe
Here is the where you can change the server group/job server.
- After you add the Batch/real Time job as a webservice.
- Go to the Webservice Batch Job Attribute and from the drop down choose the "Enable job Attributes" and hit apply.
- After this if you use the WSDL URL http://<Data Services Web Server>:<Web server Port>/DataServices/servlet/webservices?ver=2.0&wsdlxml
- You will see the job attributes that you can change based on the allowed parameters mentioned in the documentation.
The batch job or real time job is published without the job parameters by default. Once you enable the job attributes, remove and re publish the batch job as a web service. The application making the call to this webservice should be able to read the WSDL generated by Data services and pickup all the input and output parameters of the method.
Refer to the Data Services Integrator guide (Chapter 3 : pages 25 - 33 ) to get the exact parameter values permitted via Data Services jobs called via web services.
Hope this helps!
Thanks & Regards
Tiji

Bit Locker Implementation in Windows 8.1 machine using Windows server 2008 r2 server group policy.

is it possible to enable the bit locker only for windows 8.1 machines through windows 2008 r2 server group policy ?
Thanx and Regards,
Shanif

Hi Shanif,
Yes, we can do this.
Regarding how to enable Bitlocker via group policy, the following article can be referred to as reference.
Cannot Save Recovery Information for Bitlocker in Windows 7
http://blogs.technet.com/b/askcore/archive/2010/02/16/cannot-save-recovery-information-for-bitlocker-in-windows-7.aspx
After configuring the settings, we can use security filtering or WMI filtering to apply the policy to specific computers.
Regarding this point, the following blog can be referred to for more information.
Security Filtering, WMI Filtering, and Item-level Targeting in Group Policy Preferences
http://blogs.technet.com/b/grouppolicy/archive/2009/07/30/security-filtering-wmi-filtering-and-item-level-targeting-in-group-policy-preferences.aspx
Best regards,
Frank Shen

Server Group not working when one of Job Servers is down

I have a Server Group of two job servers. They have the same version 12.2.2.3 and are attached to the same Local Repository of version 12.2.2.0.
When I execute a batch job (from the Designer) and explicitly specify on which job server it should run, it works fine for either job server. Also, when I specify Batch Job execution on Server Group, it works fine.
However, when I shutdown one of the Job Servers, and then try to execute the job on Server Group, I'm getting two error messages, BODI-1111011 that one Job Server is down, and BODI-1111009 that another Job Server has failed.
At the same time, when I check the Server Group in the Management Console, it shows that the allegedly failed Job Server is in the status green.
That error is not reflected in a job server eveng log, nor there is anything written to webadmin log, not in the job trace (the latter isn't created at all).
Is there anything I can do at this point except raise a support message?

The issue was with different users for Local Repository in Admin and Job Server config. I discovered it when trying to run the job from Admin Console. Designer is probably not the best diagnostic tool for such kind of issues.

How to send the data to SQL server group in Reciever JDBC scenario

Hi Experts,
I have done IDOC to JDBC scenario, the data is successfully going to SQL server in reciever side, but in reciever side they got local server and other server groups also there, the data ia m sending is going to local server group, so where can i mention the other server group name in reciever JDBC adapter.
Kind Regards,
Praveen.

Hi,
Except if there is a way to specity this in the URL field (either using a suitable properties or a specific syntax), I do not see such feature in the JDBC adapter ... I'm not familiar with SQLServer group concept, but maybe you could use multiple receivers instead ?
So far, I haven't been able to see how to use groups in the URL ... Maybe there is way to trigger replication at SQLServer level ? Stored proc ?
Chris
Edited by: Christophe PFERTZEL on Dec 9, 2009 11:26 AM

BI Server group and Presentation Services group

Hi Experts,
I've created a BI Server group and a Presentation Services group - both named 'Reporting Superuser'.
Next I've created a user (User_1) in the BI Administration tool and added the user to 'Reporting Superuser'.
The Presentation Services group 'Reporting Superuser' has full control on the right folders and the corresponding dashboards.
I haven't added User_1 to the Presentation Services group 'Reporting Superuser'. According to the documentation that shouldn't be necessary.
Unfortunately when I log in using User_1, I don't see any of the dashboards User_1 should have access to through the group membership.
Is there anything I might have missed?
OBIEE Version 10.1.3.4.1.090414.1900
Thanks for your help
Regards
Andy

First check whether user is assigned with that particular group after logging in..
log in to presentation service with that user and go to my account.. and check for following:
Group Membership
This list shows the groups to which you belong.
Group1
Group2
check whether that user belonged group is there in that list or not...

How to setup "Server Groups" in RSPC (process chains)?

I'm a BASIS person working with our BI group on setting up their loads to only run on the application servers. If you don't define a host in RSPC, it will always run on the database server. We don't want to specific one host in case that server has issues. How can we setup the "server group" so we can use all our application servers for these process chains. It doesn't seem to use the SMLG logon groups we defined already.
Thanks in advance!

I have setup the load balancing in the RFC, but for these jobs that are submitted via RSPC, they don't look at the SMLG parameters, they just always pick the database server. We can specify one host (other than the database server) in RSPC similar to SM36, but we were trying not to do that so in case that server is down, these jobs wouldn't fail.
I thought we could setup a "server group" and assign our 3 application server to them that way they would never fail if one is unavailable and it would keep them off the database server.

How to assign values to server group when you parallelly client-copying

Hello all,
I'm now trying to create server group.
Currently, I use serial process, or default settings, when client-copying.
But I want to implement this in parallel processes.
Due to this, I have to create server group and assign a lot of values to something I don't know!
I want to create a server group, but don't know how to assign values to ones like "Max. requests in queue", "Max. no of logons" and so on.
Could you please advise me how to allocate values to the resourses shown below;
Advanced : 1 *I think "1" is the flag for advanced settings
Max. requests in queue
Max. no. of logons
Max. disp. of own logon
Max. no. of WPs used: *should be the total of SM50, I guess
Min. no. of free WPs
Max. no. of comm. entries
Max. wait time
thanks in advance,
Hozy

Hi,
Would you check this [Parallel Processes |http://help.sap.com/saphelp_sm32/helpdata/EN/e8/df959834ac11d586f90000e82013e8/frameset.htm] and [Parallel processes FAQ|http://www.saptechies.com/ccinfo-parallel-processes-faq/] i hope will get some hint.
Regards
Mohan Rao

Enable server group in BPC job execution

Dear Experts
[Note 1476057 - Enable server group in BPC job execution|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=0001476057&nlang=E]
After upgrade, the server group logic will be :
1, Create a correct server group with server assigned,
    job will be executed in specified server group;
2, Create a server group without server assigned,
     job will be successfully submitted to BW,
     but will not be executed until server is assigned to the server group;
3, Incorrectly specify a server group in web admin,
     client will get error message when run package.
As I understand the group server is defined in BW Server. Where should I specify this group server in BPC. I could not find the parameter in BPC Web Admin - Appset Parameters or BPC Server (.Net Server) - Server Options.
Appreciate if somebody can help ?
Thanks
Ashish
Edited by: Ashish Narway on Oct 14, 2010 2:55 PM

HI John,
The group settings in WGM SL and Leopard are different.
Yes, they are. I booted to my eval copy of SL Server and ran through the settings in WGM, Server Admin and Server Preferences; as you pointed out, all the mail list admin tools I could find are in the Mail service in Server Admin.
The only thing that may be of interest that I could find is that for the group mail list, the email address for the group is group_shortname@ServerDNSname, not groupshortname@yourdomain (this is in the Mail Services Admin Guide for 10.6). This might explain why your email to the group may have been rejected?
-Doug

Server group management

Hi,
When setting up an architecture where servers should be accessible only to a subset of the platform's users, e.g. geographically dispersed installations, SAP has always said to use server groups and assign the content (i.e. the reports) to the corresponding server group.
Example:
Reporting databases are deployed in Belgium and France
2 hosts containing processing servers are installed in each of those countries
Reports are restricted to one of the two server groups
While this setup works fine for existing reports, what do you do with ad-hoc reports? E.g. a user creates a new Web Intelligence report against a universe that pulls data from the database in Belgium. As far as I can tell, there's no way that you can make that report use the processing server in Belgium. Instead, it will randomnly use a processing server that's available to handle its request.
Also, using server groups this way requires your users to set the processing server after they save the report for the first time, or create custom code based on the SDK that will assign the server group.
I've run into the same problem with deployments where there's a requirement to have processing servers dedicated to departments. As far as I can tell, there's no way to do this as there's no link between user and server (i.e. it's not possible to define which users or user groups have access to a server group).
I was hoping the multi-tenant feature in BI4 would provide some way around this, but it seems that's not how it works.
Any input regarding this type of setup is very welcome! Thanks.
Kind regards,
Kristof Speeckaert

Hi,
Thanks for your input.
I tried this in the past, but just to be sure, I did the following setup again (BI4 SP05):
Created two servers groups
Server group 1:
WebI Processing Server 1
Connectivity Adaptive Processing Server
WebI Adaptive Processing Server
Server group 2:
WebI Processing Server 2
Connectivity Adaptive Processing Server
WebI Adaptive Processing Server
Created one user group with one user in it
Denied access to server group 1 for the test group
The user group has full application and content rights
Scenario:
Logged on using the BI Launch pad
Opened and refreshed a sample WebI document
Brought the Webi Processing server in group 2 downOnly the WebI processing server in group 1 is up and running and the user group has no access to this server group.
Logged out and in again
Opened and refreshed the same sample document
Based on your suggestion, I shouldn't have been able to open nor refresh the sample document in step 5, however it worked without a problem.
This would mean that granting/denying users access to servers/server groups does not prevent them from using the server, in this case for opening and refreshing a WebI document.
Here's the relevant paragraph regarding server group access rights from the Administrator Guide:
You can use rights to grant people access to servers and server groups, allowing them to perform tasks such as starting and stopping servers.
If your server team needs to perform regular server maintenance tasks that require them to shut down and start up servers, you need to grant them rights to the servers. You may also want to delegate SAP BusinessObjects Business Intelligence platform server administration tasks to other people. Or you may want different groups within your organization to have control over their own server management.
Judging from this information, assigning rights to server groups should be used from administrative access to the servers, not to decide who get to use the server from an end-user perspective. The latter should be done by assigning server groups to documents/reports. However, this leaves us with the same problem when dealing with ad-hoc reports.
Kind regards,
Kristof Speeckaert

Server Groups - "Give Preference" vs "Only Use"

Hi All,
I'm working on a project where we want to have batches of reports being scheduled to specific server groups. Currently when these batches are run, the reports use the "first available server" option in CMC. This is problematic as the reports are just being scheduled to whatever server has the least load at the time, so on demand reports just have to wait until the long batches are over before they can be scheduled.
In CMC, there are two options for setting up server groups:
"Give preference to servers belonging to the selected group"
"Only use servers belonging to the selected group"
Our fix was to schedule these batches to server groups so that some of the servers would be available for on demand reporting. Since our goal is to have distinct server groups to help with load balance, we went with the "Only use" option. The functionality of this is pretty clear: Even if the needed servers (AJS) are disabled, stopped, or busy, the reports will still be scheduled to this server group. However, the functionality regarding the "Give preference" option is unclear.
My question is: Under what conditions would BusinessObjects switch to using a server not included in the server group if the "Give preference" option were used?
As far as documentation goes, the best answer I found was that the server would switch when the needed servers are "not available". What exactly does this mean?
When the server is disabled? (Assuming yes, this would be good for us)
When the server is stopped? (Assuming yes, this would be good for us)
When the server is busy? (No idea..., if yes, this would be bad)
If the server switches when the specified server is busy, then we just run into the same issue we had before, so we wouldn't want to do that. Does anyone have any insight into how this works so we can figure out which option to go with?
Thanks everyone!
Valentin Lazar

First reports will try to use the servers in the group, if they are not available, then it will go other servers.It may be disabled, or stopped.

Imported Crystal Reports from CE10 with specified server group problem

We have Crystal Reports on a CE10 Environment where we have assigned and scheduled them to different server groups in order to throttle workload and maintain customer service levels. When importing these reports to BO XI 3.1, it appears to bring over the server group with the report (it's visible in the CMC) but when a normal user goes to do a schedule on the report in InfoView, it fails, unless they go to the Scheduling Server Group' area on the report schedule options and select 'use first available server'. All of the other options were greyed out. If I log in as an account that is the member of the 'Administrators' group, it shows the option 'Only user servers belonging to the selected group'. Am I missing a permission/security setting? The user doing the scheduling has the 'Schedule' security profile on the report.

Must grant user rights to view server groups and servers in order to allow for scheduling to specific server groups or servers

CVP - SIP Server Groups and Redundant SIP Proxy (CUPS)

I am migrating from a CVP 7 + UCCE 7.5 solution which uses srv.xml files on the CVP servers to implement redundancy
from CVP to the SIP Proxies (which are CUPS based).
In the new CVP 8.5 + UCCE 8.5 solution, I am trying to set up equivalent redundancy, which
is now done via Server Groups.
The solution is geographically diverse, with one CVP server + a CUPS server (publisher) at Site1,
and the second CVP + CUPS server (subscriber) at site 2.
Previously (on CVP 7), I was able to configure each CVP server so that its priority was to use the CUPS server at its
"local" site. Hence there were 2 different srv.xml files, one for each CVP server.
To configure this in CVP 8.5, I would need 2 SIP Server groups, to give each CVP a group
configured to prefer the "local" CUPS server. But when I configure a SIP server group(s) pointing to CUPS, I seem to be only able
to get one single Server Group to work. That single Server Group only works if the server group name
matches exactly the Domain Name configured in CUPS. Since CUPS' Domain name is a single cluster wide name,
I can get only one Server Group working, not the two that I need.
So, where am I going wrong?
Regards.

Fairly new to CVP and had a question about how to configure the dialed number patterns so they point to more than 1 CUCM. My environment doesn't have a SIP Proxy or DNS Srv. That said, I tried to create as what was mentioned above - SIP Serve Group with 2 CUCM Subs then have a dialed number pattern point to it. However, when I initiate a call to an ICM script and eventually hit an agent, it flips between ready and reserve. When I change the dialed number pattern to point to a specific CUCM, it works fine. Followed all the aobve recommendations as well. Any idea how to make this work? Hoping I'm just missing something here...

Creating server group for scheduling Webi report

Hi All,
I have 33 scheduled reports running in my BO 4.1 environment.
I want to split this in 3 groups and create server group to run specific job.
To achieve this what should I have to do ?
In group one what server and services should be there to run my schedule successfully ?
I thought of cloning server but my research says it is not good practice. Can someone please guide me with this ?

Please share the details regarding web intelligence report based on BW data or based on Universe (RDBMS) because in both the case Adaptive Processing Server configuration is change.
For BW Data Source below is the details regarding Adpative processing Server:
<Node_Name>_SIA.APSCORE
Services:
Auditing Service, Platform Search Service, Security Token Service, TraceLog Service, Translation Service
<Node_Name>_SIA.APSFEDERATION
Services:
Auditing Service, Data Federation Service, TraceLog Service
<Node_Name>_SIA.APSLCM
Services:
Auditing Service, Lifecycle Management ClearCase Service, Lifecycle Management Service, TraceLog Service, Visual Difference Service
<Node_Name>_SIA.APSMonitoring
Services:
Auditing Service, Monitoring Service, TraceLog Service
<Node_Name>_SIA.APSPublishing
Services:
Auditing Service, Publishing Post Processing Service, Publishing Service, TraceLog Service
<Node_Name>_SIA.APSWebi
Services:
Auditing Service, DSL Bridge Service, Rebean Service, TraceLog Service, Visualization Service, Web Intelligence Monitoring Service
<Node_Name>_SIA.BexWebApplication
Services:
Auditing Service, BEx Web Applications Service, TraceLog Service
<Node_Name>_SIA.MDAS
Services:
Auditing Service, Multi Dimensional Analysis Service, TraceLog Service
For Job Server:
Adaptive Job Server:
<Node_Name>_SIA.AJSWebi
Services: Web Intelligence
Add all above services in Server Group and assign to web intelligence report based on BW Data and check the status.
Thanks,
Daya

Server Side Trust - Server Group

Hi,
One of the steps to create publications / server side trust (as per SAP Press BO and BW Integ book) is to create a Server Group and add certain services to it. It says that the Destination and Publication Job Server should be added. I dont have them - will that be a problem?
Thanks

Hi,
They dont seem to exist so I am guessing I will have to create them myself?
Could you or someone please confirm that the following selections should be made when creating the servers:
DESTINATION JOB SERVER - Service Category: Core Services, Service: Destination Delivery Scheduling Service
PUBLICATION JOB SERVER - Service Category: Core Services, Service: Publication Scheduling Service
Also, do I need to include any of the additional services when creating the servers?
Many Thanks
Edited by: Leo on Apr 20, 2011 10:03 AM

How to add batch server group in script parameters

Hi All,
Is there any way to incorporate the "background server groups" directly in the script parameters in REDWOOD? There is an option to provide the target server in parameter TARGET_SERVER. But its not working if i maintain a server group. Any help will be appreciated.
Thanks
Arun Raghavan

Hi Blom,
Thanks for the reply. I am not able to find any parameter with the name TARGET_GROUP. Can I add this explicitly as a new parameter? But i am not sure how it will correlate to the batch server group in SAP. I also tried to import a job with target group defined. But the imported copy doesn't contain any values for it.

Server Group

Similar Messages

Maybe you are looking for