Server ---IP address//redirection..Pls

I am new to this Please help me
i am using JSPs
i wanna a redirect my clients request to a secure payment
gateway (Bank here after) ,But while doing so the Bank needs the
invoked IP is from the server(constant) but always I try this Bank gets the clients IP address
instead, i used sendredirest or jsp:forward ,
is there any other alternatives to achieve this ,Please help me
NB:- I tried with URLconnection directly from server but it failed as the
Bank url holds a https protocol

Hi,
You can use filters which are part of Servlet & JSP s latest specification, to
change the contents of the request before forwarding.You can find more information
on this technology at http://java.sun.com/jsp.Also there is an white paper on filters http://java.sun.com/products/servlet/Filters.html.
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Sysytems
http://www.sun.com/developers/support/

Similar Messages

The attempt to connect to the server (IP address) on port 443 failed - OLT

Hi all
I am facing one problem, if i run load to any application for 100 users for 1 iteration then it is not showing any error. Lets say i ran the load of 100 users for one hour then for some users there are errors like
Line: (script.java:84)][ScriptException]: The attempt to connect to the server (IP address) on port 443 failed.
And my understanding is the user's which are facing failures is not able to get response or page loaded at their end. As failures are occuring for some particular steps not the entire scenario. Pls confirm.
Thanks

I believe that's an indication that there is an error receiving mail, but if you have any drafts or email in your outgoing mailbox, try deleting them. Apple's troubleshooting steps for this are (from http://support.apple.com/kb/TS4002):
Cannot receive mail in OS X Mail
If you use OS X Mail, look at the name of your iCloud account on the left side of the main Mail window. If your iCloud account name is dim and has a lightning bolt next to it, your account is offline. To resolve this, make sure your computer is connected to the Internet. Then choose Go Online from the Mailbox menu.
If taking your iCloud account online doesn't resolve the issue, follow these steps:
From the Mail menu, choose Preferences.
In the Preferences window, click the Accounts tab if it is not already selected.
In the Accounts list, select your iCloud email address.
Click the Account Information tab.
Verify your SMTP server settings with the following information:
Incoming Mail Server: imap.mail.me.com
User Name: Your iCloud email address
Password: Your iCloud password
Click the Advanced tab and verify the following additional settings:
Port: 993
Use Secure Sockets Layer (SSL): Should be enabled
Authentication: Password

Invalid server IP address for Remote Panels under LV 8.0.1

The other messages for troubleshooting the "invalid server IP address" were very helpful with getting my EXE to operate as a remote panel. But there is still one issue that I cannot resolve that seems to be caused by the 8.0.1 upgrade.
The remote panel work perfectly using IE6 on a computer that has the LV 8.0.1 FDS or PDS installed. When I use a computer that has LV 7.1 or no LV at all, the invalid server IP address appears inside the border of where the VI should appear on the HTML page. The connection to the remote computer is correct, the HTML file is delivered by the web server in LV, but the panel part of the page returns the error.
Does the part of the HTML that loads the Run Time Engine need to be updated for 8.0.1? Will the LV 8.0 RTE work for a remote panel on an EXE compiled for LV 8.0.1?
The code is:
var obj = '<OBJECT ID="LabVIEWControl" CLASSID="CLSID:A40B0AD4-B50E-4E58-8A1D-8544233807AD" WIDTH=1216 HEIGHT=915 CODEBASE="ftp://ftp.ni.com/support/labview/runtime/windows/8.0';
if (lng.indexOf("fr") != -1) { obj = obj + '/French'; }
else if (lng.indexOf("de") != -1) { obj = obj + '/German'; }
else if (lng.indexOf("ja") != -1) { obj = obj + '/Japanese'; }
obj = obj + '/LVRunTimeEng.exe">';
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Thanks for the suggestion, Tunde. After further experimentation, it seems that 8.0.1 was not the problem. I worked perfectly when I removed the <parameter server=... > line that I added manually.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Calendar server and address book server login fails with outlook connector

Hi all,
I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
When i deploy the connector i get the pop ups saying "Server:servername:3080
Error:service not available" also
"Server:servername:80/uwc"
Error:service not available"
asking to login to calendar server and address book server.Clicking "OK" allows install.
In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
Regards,
lmeenakshy

Hi,
When i deploy the connector i get the pop ups saying
"Server:servername:3080
Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
"Server:servername:80/uwc"
Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
asking to login to calendar server and address book
server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
In outlook i can send and receive mails but not the
meeting requests.It gives the error "login to
calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of
the error.The username and passwd entered is
correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
Regards,
Shane.

How to retrieve the server IP address

Hi Experts,
In my scenario, if some problem occur, then the XSLT mapping sends a mail to some one,subject is 'PRD', if we execute this from production or quality or development server.
But now i want to know this mail from which server, so i want to change the subject line as 'PRD' if it is only from production system otherwise 'OTH', how to achieve this ? No hard code allow at any where.
I have one thought, if we find the server ip address then we can recognize, but how to get the server IP address ? Is it possible ?
Thanks
Ramesh

Hi,
My source is some WSDL file, this is more than 15000 characters so i am unable to send the full file.
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
     <wsdl:types>
          <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
               <xsd:import namespace="http://www.w3.org/XML/1998/namespace" schemaLocation="http://www.w3.org/2001/xml.xsd" />
               <xsd:element name="Pip3A4PurchaseOrderRequest" type="Pip3A4PurchaseOrderRequest" />
               <xsd:complexType name="Pip3A4PurchaseOrderRequest">
                    <xsd:sequence>
                         <xsd:element name="fromRole" type="fromRole" />
                         <xsd:element name="GlobalDocumentFunctionCode" type="xsd:string" />
                         <xsd:element name="PurchaseOrder" type="PurchaseOrder" />
                         <xsd:element name="thisDocumentGenerationDateTime" type="thisDocumentGenerationDateTime" />
                         <xsd:element name="thisDocumentIdentifier" type="thisDocumentIdentifier" />
                         <xsd:element name="toRole" type="toRole" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="fromRole">
                    <xsd:sequence>
                         <xsd:element name="PartnerRoleDescription" type="PartnerRoleDescription" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="PartnerRoleDescription">
                    <xsd:sequence>
                         <xsd:element name="ContactInformation" type="ContactInformation" minOccurs="0" />
                         <xsd:element name="GlobalPartnerRoleClassificationCode" type="xsd:string" />
                         <xsd:element name="PartnerDescription" type="PartnerDescription" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="ContactInformation">
                    <xsd:sequence>
                         <xsd:element name="contactName" type="contactName" minOccurs="0" />
                         <xsd:element name="EmailAddress" type="xsd:string" minOccurs="0" />
                         <xsd:element name="facsimileNumber" type="facsimileNumber" minOccurs="0" />
                         <xsd:element name="telephoneNumber" type="telephoneNumber" minOccurs="0" />
                         <xsd:element name="PhysicalAddress" type="PhysicalAddress" minOccurs="0" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="contactName">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="FreeFormText">
                    <xsd:simpleContent>
                         <xsd:extension base="xsd:string">
                              <xsd:attribute ref="xml:lang" />
                         </xsd:extension>
                    </xsd:simpleContent>
               </xsd:complexType>
               <xsd:complexType name="facsimileNumber">
                    <xsd:sequence>
                         <xsd:element name="CommunicationsNumber" type="xsd:string" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="telephoneNumber">
                    <xsd:sequence>
                         <xsd:element name="CommunicationsNumber" type="xsd:string" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="PartnerDescription">
                    <xsd:sequence>
                         <xsd:element name="BusinessDescription" type="BusinessDescription" />
                         <xsd:element name="GlobalPartnerClassificationCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="PhysicalAddress" type="PhysicalAddress" minOccurs="0" />
                         <xsd:element name="ContactInformation" type="ContactInformation" minOccurs="0" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="BusinessDescription">
                    <xsd:sequence>
                         <xsd:element name="GlobalBusinessIdentifier" type="xsd:string" minOccurs="0" />
                         <xsd:element name="GlobalSupplyChainCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="businessName" type="businessName" minOccurs="0" />
                         <xsd:element name="NationalBusinessTaxIdentifier" type="NationalBusinessTaxIdentifier" minOccurs="0" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="PurchaseOrder">
                    <xsd:sequence>
                         <xsd:element name="AccountDescription" type="AccountDescription" minOccurs="0" />
                         <xsd:element name="comments" type="comments" minOccurs="0" />
                         <xsd:element name="ContractInformation" type="ContractInformation" minOccurs="0" maxOccurs="unbounded" />
                         <xsd:element name="DocumentReference" type="DocumentReference" minOccurs="0" maxOccurs="unbounded" />
                         <xsd:element name="FinancingTerms" type="FinancingTerms" minOccurs="0" maxOccurs="unbounded" />
                         <xsd:element name="generalServicesAdministrationNumber" type="generalServicesAdministrationNumber" minOccurs="0" />
                         <xsd:element name="GlobalGovernmentPriorityRatingCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="GlobalPurchaseOrderFillPriorityCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="GlobalPurchaseOrderTypeCode" type="xsd:string" maxOccurs="unbounded" />
                         <xsd:element name="governmentContractIdentifier" type="governmentContractIdentifier" minOccurs="0" />
                         <xsd:element name="installAt" type="installAt" minOccurs="0" />
                         <xsd:element name="isDropShip" type="isDropShip" />
                         <xsd:element name="OrderShippingInformation" type="OrderShippingInformation" minOccurs="0" />
                         <xsd:element name="ProductLineItem" type="ProductLineItem" maxOccurs="unbounded" />
                         <xsd:element name="proprietaryInformation" type="proprietaryInformation" minOccurs="0" />
                         <xsd:element name="requestedEvent" type="requestedEvent" minOccurs="0" />
                         <xsd:element name="requestedShipFrom" type="requestedShipFrom" minOccurs="0" maxOccurs="unbounded" />
                         <xsd:element name="SecondaryBuyer" type="SecondaryBuyer" minOccurs="0" />
                         <xsd:element name="shipTo" type="shipTo" minOccurs="0" />
                         <xsd:element name="TaxExemptStatus" type="TaxExemptStatus" minOccurs="0" />
                         <xsd:element name="totalAmount" type="totalAmount" minOccurs="0" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="AccountDescription">
                    <xsd:sequence>
                         <xsd:element name="accountName" type="accountName" />
                         <xsd:element name="AccountNumber" type="xsd:string" minOccurs="0" />
                         <xsd:element name="billTo" type="billTo" minOccurs="0" />
                         <xsd:element name="CreditCard" type="CreditCard" minOccurs="0" />
                         <xsd:element name="financedBy" type="financedBy" minOccurs="0" />
                         <xsd:element name="GlobalAccountClassificationCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="prePaymentCheckNumber" type="prePaymentCheckNumber" minOccurs="0" />
                         <xsd:element name="WireTransferIdentifier" type="xsd:string" minOccurs="0" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="accountName">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="billTo">
                    <xsd:sequence>
                         <xsd:element name="PartnerRoleDescription" type="PartnerRoleDescription" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="PhysicalAddress">
                    <xsd:sequence>
                         <xsd:element name="addressLine1" type="addressLine1" minOccurs="0" />
                         <xsd:element name="addressLine2" type="addressLine2" minOccurs="0" />
                         <xsd:element name="addressLine3" type="addressLine3" minOccurs="0" />
                         <xsd:element name="cityName" type="cityName" minOccurs="0" />
                         <xsd:element name="GlobalCountryCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="GlobalLocationIdentifier" type="xsd:string" minOccurs="0" />
                         <xsd:element name="NationalPostalCode" type="xsd:string" minOccurs="0" />
                         <xsd:element name="postOfficeBoxIdentifier" type="postOfficeBoxIdentifier" minOccurs="0" />
                         <xsd:element name="regionName" type="regionName" minOccurs="0" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="addressLine1">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="addressLine2">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="addressLine3">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="cityName">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="postOfficeBoxIdentifier">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="regionName">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="businessName">
                    <xsd:sequence>
                         <xsd:element name="FreeFormText" type="FreeFormText" />
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:complexType name="CreditCard">
                    <xsd:sequence>
                         <xsd:element name="cardHolderName" type="cardHolderName" />
                         <xsd:element name="creditCardIdentifier" type="creditCardIdentifier" />
                         <xsd:element name="expiryDate" type="expiryDate" />
                         <xsd:element name="GlobalCreditCardClassificationCode" type="xsd:string">

Change of SAP Server IP Address

Hi,
We are using operating system win 2008 server (IP address: 192.168.50.1), In that we are accessing SAP ECC6.0 Server(IP address: 192.168.50.2) and SAP Solution Manager server(192.168.50.3) through HyperV Manager, both servers are installed in windows server 2003.
Recently we are relocating our server.
Now we are planning to change IP address of servers according to our LAN.
Like :
win 2008 server IP address: 192.168.50.1 to 192.168.2.1
win 2003 server( SAP ECC6.0) IP address 192.168.50.2 to 192.168.2.2
win 2003 server( SAP Solution manager) IP address 192.168.50.3 to 192.168.2.3
Please suggest me if any impacts while changing the IP Address.
Regards,
BBC Achari

Dear Achari,
Check whether your machines are configured using hostnames not ip addresses.
look in table rfcdes for sm59 RFC destinations and see if you need to change any ip to valid host names also look at any scripts that may ftp files to your machine or so
Also check profiles/scripts/./etc/hosts etc.
Also check your transport management system, it always using hostname but check whether any IP address you have mentioned there.
Except that there is no big risk in changing IP addresses.
Hope this will help.
Thanks
Anil

How to retrieve available (server)-IP addresses on a LAN

Is there a method to get all/the available (server)-IP-address(es) on a LAN from the host program?
As far as I understood the samples (e.g. in tcpex.llb) the host (or it's operator) has to know the IP-address of the server to start communication. However it would ease the usage of a host-program if all/the available server(s) could be selected e.g. from a list-box.
I posted this question already yesterday with some additional explanations however couldn't find it in my "posted questions"-list. So I try again.

You don't tell us enought about the type of "servers" you mean. Are these all LabVIEW programs? In this case it should be relatively easy for them to keep each other updated at regular interval, e.g. via UDP multicasts.
Alternatively, your servers can announce themselves via a UDP packet to the subnet broadcast address and to a specific port.
If these are servers with code not under your control, you need to probe them. This is not such a big deal on your private LAN and I don't think it will trigger IDS systems. Keep a short list of all possible server IPs, then try to connect at the specified port at regular intervals using a short timeout.
Are you communicating with TCP or UDP?
In the absence of firewall code, you can have 3 possible responses for TCP:
(1) No response --> The server computer is down (or there is a stealth personal firewall running). You get a TCP timeout error.
(2) Active rejections (TCP RST packet) --> The server computer is up, but the server program is not running. Nothing is listening on the target port. You'll get an error.
(3) Accepted connection (SYN-ACK) packet. --> The server is up and listening for connections. The threeway handshake can be completed. No error.
UDP is a bit trickier, because it is connectionless. Many UDP services are one-way. For example a syslog server just receives packets, it never acknowledges anything.
It is easy to tell if the server computer is up, but the service is not listening. In this case you get an ICMP(3,3) response and an immediate error.
If the service is listening, you either get nothing or a specific response, depending on the type of server. If you are waiting for return traffic, you'll get a timeout error in UDP read either way.
(If you just want to check if the server computer is actually up, probe it on a unlikely high port that virtually guarantees an ICMP(3,3) response in the absence of a personal firewall program.)
LabVIEW Champion . Do more with less code and in less time .

How to automatically detect server ip address

does any one know how to automatically detect an ip address of a server from the client with a socket based connection ?
instead of prompting the client to connect to the server ip address which is trouble some.

You must start with some initial information and a known environment.
There are several possibilities after that.
- The server has a 'name'. This is not an ip address but a name like "yahoo.com". When you connect using that, even if the IP changes, the correct IP will be returned. (At least ignoring an annoying bug in some VMs)
- A specific IP address
- Use a methodoly to 'request' a server address. One version of this is to use a UDP broadcast another version uses a service manager (which itself must be found.)

ACS 4.2.0 AAA-server-IP-address changing to 169.254.x.x

Hello,
I have ACS 4.2.0.124.15 installed on a windows server 2008.
In the configuration menu : network config > AAA server , the AAA-server-IP-address change to 169.254.x.x each time I disconnect the ethernet interface of the server.
Allthough, the ip adresse in my network connection of the windows-Lan-connection is set to static.
Whe I reconnect the ethernet interface of the server, it stays in 169.154.x.x. And I need to reconfigure the real static adresse each time.
Do you knows this problem. Is it a way to avoid it ?
Michel Misonne

Hello,I have ACS 4.2.0.124.15 installed on a windows server 2008.In
the configuration menu : network config > AAA server , the
AAA-server-IP-address change to 169.254.x.x each time I disconnect the
ethernet interface of the server.Allthough, the ip adresse in my network connection of the windows-Lan-connection is set to static.Whe
I reconnect the ethernet interface of the server, it stays in
169.154.x.x. And I need to reconfigure the real static adresse each
time.Do you knows this problem. Is it a way to avoid it ?Michel Misonne
Hi Michel,
It was issue in ACS 1113 SE Appliance and clear solution for the above is mentioned in the below link
http://www.ciscosystems.com/en/US/products/sw/secursw/ps2086/products_tech_note09186a00808d9199.shtml#stat
HTH
Ganesh.H

Can I create a report at WAAS central manager based on server IP address

Hi,
I have two distinct applications running at port 8080 for which I would like to have separated performance reports at Central Manager. Is there any mean to do that by using server ip address for example? If so how? Do I need to change policy? If so is that the only way?
Thanks
Wilhelm

Hi Rulix,
The latest version of CR Server is 2008. Therefore I'm assuming you are using CR Server 2008.
New in CR 2008 is the .NET report modification software development kit (SDK). The report application server (RAS) SDK is now available for users of Crystal Reports .NET API without the use of a RAS server. Report modification such as changing, adding, or removing database providers, or adding, removing, or creating report objects, parameters, formulas, and sections can be achieved by accessing the RAS SDK through the Crystal Reports .NET SDK.
Java developers however receive the JRC and Java SDK documentation through the free Crystal Reports for Eclipse download. This product will be updated on a separate schedule from Crystal Reports.
Further Information and samples are available in our [Developer Library|https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/5001d5de-f867-2b10-00bf-8d27683c85a0]
Kind regards,
Tim

CiscoWorks: Not receiving syslogs, since we change CiscoWorks server IP Address

Hi,
We are using CiscoWorks 3.2.1. We have changed CiscoWorks server IP Address, since then we are not receiving syslogs from Devices. Although devices configurations have also been changed so that they log to new IP Address e.g. logging new IP Address. But we are not getting syslogs now.
Rest all operations of CiscoWorks are working ok. E.g. We can access it from IE, inventory/config collection working, we can deploy configs etc. But we are not getting syslogs.
Also :
Test Collector Subscription Status
SSL certificate status SSL certificates are valid and properly imported
Collector status Collector Server_IP_Address is up and reachable.
but I am not seeing any new alerts receiving here.
When I do start the SyslogCollector.log/SyslogAnalyzer.log from server, I get below message;
E:\Ciscoworks\log>net start crmlog
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
E:\Ciscoworks\log>pdexec SyslogCollector.log
ERROR: cmd failed. Server reason: Application SyslogCollector.log is not registe
red. All requests to operate on this application will be ignored.
E:\Ciscoworks\log>pdexec SyslogAnalyzer.log
ERROR: cmd failed. Server reason: Application SyslogAnalyzer.log is not register
ed. All requests to operate on this application will be ignored.
E:\Ciscoworks\log>
Please advise what need to be changed on CiscoWorks in reference to new IP Address.Its required urgently.
Thanks

We have already remove the logging on old IP from devices, and now about 4000 devices are logging to new IP.
Above mentioned problem is on CiscoWorks only, as its not collecting the syslogs. Below error message might suggest some solution.
E:\Ciscoworks\log>net start crmlog
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
E:\Ciscoworks\log>pdexec SyslogCollector.log
ERROR: cmd failed. Server reason: Application SyslogCollector.log is not registered. All requests to operate on this application will be ignored.
E:\Ciscoworks\log>pdexec SyslogAnalyzer.log
ERROR: cmd failed. Server reason: Application SyslogAnalyzer.log is not registered. All requests to operate on this application will be ignored.
E:\Ciscoworks\log>

Skype server IP address required

Hi,
I need to use skype in a restricted ( Only certain ports are enabled) network. As per the current network settings, all skype service ports except 80 and 443 are disabled. So this cause even skype login is difficult. If I enable all ports above 1024 then skype works. But I can not use it as a permanent solution. I would like you to share me the skype server IP address and and the ports which use. So that I can create an additional policy in my UTM (Fortigate80C) by adding exception to skype ports and skyper server IPaddess/FQDN.
Regards,
Jithin

SQL> select host_name hostname from v$instance;
HOSTNAME
mytestdb
SQL> select utl_inaddr.get_host_address('mytestdb') ipaddress from dual;
IPADDRESS
xxx.xxx.xxx.xxx
Regards,
Sabdar Syed.

Web server ip address

please help, can anyone tell me where i can find a web server ip address so i could use it on other computers to access my site

/System Preferences.../Sharing/
Click Web Sharing checkbox and server IP URL is displayed to the right. David Powers has an _excellent tutorial_ that shows how to set up a virtual host on Leopard using Apache. There's _more info_ if you want to integrate PHP. Is that what you're looking for?
You would have to publish to a folder from iWeb and place that folder in your user/sites folder.
Hope that helps

Your server IP address is in local blacklist

Recently it has happened to me more and more often that my emails are sent back to me as undelivered email, with the remark "Your server IP address is in local blacklist".
This happens even with my contacts that are in my Address Book and I was sending them emails previously no problem!
Even replied to an email and got the reply right back with the same statement.
Could anybody tell me what to do?
I have a dot mac account and do not like this trouble at all.
Thanks a lot in advance,
Lacko B

That would suggest that somebody reported somebody with a .mac address to a blacklist to which the mail providers of the people to whom you are attempting to send emails use as part of their own spam filtering, and those email providers blacklisted mac.com as they are the server.
You should probably alert .mac mail technical support people, providing the returned emails with full headers intact, and maybe they can sort it out with the blacklist maintainer and the mail provider who is blocking you. There really isn't anything else you can do.

The server network address can not be reached or does not exist

Hi all
    When i am trying to configure Mirroring .i am getting the below error.
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
. TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.
I post the complete error message below ,which is in red
TITLE: Database Properties
An error occurred while starting mirroring.
ADDITIONAL INFORMATION:
Alter failed for Database 'success'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
BUTTONS:
OK

Hi,
I have the same problem. However beginning over and over again and using other ports did not solve this unfortunately.
Here is the SQL I used to setup the mirroring.
* Principal DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
BACKUP DATABASE TEST
    TO DISK = 'C:\full-backup.bak'
    WITH FORMAT
BACKUP LOG TEST
    TO DISK = 'C:\log.bak'
ALTER DATABASE TEST SET PARTNER ='tcp://sql2.domain.local:5022';
* Mirroring DB
CREATE ENDPOINT [MirroringEndpoint]
    AUTHORIZATION [DOMAIN\administrator]
    STATE=STARTED
    AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
    FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
RESTORE DATABASE TEST
    FROM DISK = 'C:\full-backup.bak'
    WITH NORECOVERY
RESTORE LOG TEST
    FROM DISK = 'C:\log.bak'
    WITH FILE=1, NORECOVERY
ALTER DATABASE TEST SET PARTNER ='tcp://sql1.domain.local:5022';
The last statement on the principal server gives me the following error :
Msg 1418, Level 16, State 1, Line 1
The server network address "tcp://sql2.domain.local:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
From the principal server I'm able to ping the mirror server and can establish a telnet connection. When the statement gets executed even netstat gives me the following output :
TCP    0.0.0.0:5022           0.0.0.0:0              LISTENING       1244 [sqlservr.exe]
TCP    10.1.1.140:5022       10.1.1.110:1223       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1226       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1216       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1218       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1225       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1222       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1221       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1224       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1219       TIME_WAIT       0
TCP    10.1.1.140:5022       10.1.1.110:1220       TIME_WAIT       0
Is it normal so many ports get opened?
Any help would be greatly appreciated (as this drives me crazy :-( )
Found the problem eventually. The mirroring ran as the NT_AUTORITY user instead of DOMAIN\administrator.

Server ---IP address//redirection..Pls

Similar Messages

Maybe you are looking for