Server Licensing Mode?

In Windows Server 2012 R2, are the old "Per Seat / Per Server" license modes even present any more? Is there a way to check what license mode a server is in?

Hi,
For licensing related issue, you’d better contact Microsoft licensing team. In the United States and Canada, you may call the licensing team directly at
1-800-426-9400
(select option 4), Monday through Friday, 6:00 A.M. to 5:30 P.M. (PST) to speak directly to a Microsoft licensing specialist. In this way, you will know the detailed information about license.
Worldwide customers can use the Guide to Worldwide Microsoft Licensing Sites
http://www.microsoft.com/licensing/worldwide.aspx to find contact information in their locations.
Thanks for your understanding!
Regards.
Vivian Wang

Similar Messages

  • Windows Terminal Server Licensing Mode

    Hi all.
    Anybody knows how to license a Windows Terminal Server to be used only throught SGD?. I have more than 100 users behind a SGD, and I want to export Windows applications to them.
    I know that there are to kinds of Windows Terminal Server licenses. Users or Devices CAL's. If I'm using SGD, do i need a license for each users, or with one license for each SGD server is enought?.
    Thanks.

    Hi.
    It's not Oracle limitation or rules. It's rules of Microsoft.
    http://tonymackelworth.wordpress.com/tag/multiplexing/
    http://download.microsoft.com/download/8/7/3/8733d036-92b0-4cb8-8912-3b6ab966b8b2/multiplexing.pdf
    "You may deploy network architectures that use hardware or software to reduce the number of devices or users that directly access the software on a server. This is referred to as multiplexing or pooling. However, this does not reduce the number of CALs required to access or use the server software. A CAL is required for each device or user that is connected to the multiplexing or pooling software or hardware front end."
    Regards.

  • [Forum FAQ] Troubleshoot the error "The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode"

    Symptom
    RD License server is a key component of RDS. It licenses users to access RDS servers.
    After purchase the required RDS CALs, we need to activate the RDS License server and install the purchased RDS CALs. However, during the installation or after installation, we may face errors
    about RDS License.
    In most cases, the following error may occur.
    Error:
    The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server "Server name" does not have any installed licenses with the following
    attributes:
    Product version: Windows Server 2012
    Licensing mode: Per User
    License type: RDS CALs
    Troubleshooting
    1. Check whether the RD License Configuration is configured properly and there are no Warnings in the Event.
    2. The License Server should be part of 'RD Server License' group in Active Directory Domain Services.
    3. Check if the Licensing Mode is correct.
    - To change the Licensing Mode we can use RD Licensing diagnose, PowerShell cmdlet and Group Policy.
    Via PowerShell cmdlet:
    To change the licensing mode on RDSH/RDVH:
    $obj = get-wmiobject -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
    $obj.ChangeMode(value)
    # Value can be 2 - per Device, 4 - Per user
    Via Group Policy
    Path: Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
    Use the specified RD license servers = FQDN of server name
    Set the Remote Desktop licensing mode =
    Per User
    However, if issue persists, please provide detailed information and post the question in the
    Remote Desktop Services (Terminal Services) forum.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Hi Richard,
    You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
    Thanks,
    Umesh.S.K

  • Windows Server 2012 The licensing mode for the Remote Desktop Session Host server is not configured

    Hi
    I have a standard Windows Server 2012 that is hosted in the cloud by a hosting provider -
    This server has been up and running fir 6 months - recently we have been getting a warning
    "The licensing mode for the Remote Desktop Session Host server is not configured" - The Remote Desktop Session Host server is within its grace period, but the RD Session Host server has not been configured with any license server.
    Yet, we only use this with 2 connections as part of the standard licence agreement and this server is not used as a user's desktop only an ftp and web server- do therefore we do not need to purchase any cal licences (we have another server with the same
    hosting company that does not have this issue and has been up for 18months)
    Please can someone advise how I resolve this issue, the hosting company states that I must resolve it as they only host and resell the server licence
    Thank-you
    Richard Steele

    Hi Richard,
    You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
    Thanks,
    Umesh.S.K

  • Reporting Services Add-in for Sharepoint- does it need an SQL Server license?

    In a new project we will be creating an SSRS in Sharepoint integrated mode. For this we'll need SQL Server and Sharepoint on that box.
    We'll also have one or more SharePoint Web Front End (WFE) servers. To allow them to connect to the SSRS-in-sharepoint-mode box, and to present the user with the right user interface for doing so, I believe we can install the Reporting Services Add-In for
    Sharepoint on the WFE servers.
    The question is, do we need to have  SQL Server license for each WFE server where we use the Reporting Services Add-In, or is it free to use?
    We've had advice that we need to buy a SQL Server license everywhere we use the add-in, but I am not sure this is correct.
    Thanks in advance,
    Rich

    Hello there,
    The Reporting service Add-in for SharePoint can be downloaded free on Microsoft Download site. That means it does not need any license on the add-in.
    Regards,
    Edward
    Edward Zhu
    TechNet Community Support

  • Managed server independence mode startup : VERY slow (2h~)

    Hello there,
    I'm posting this thread to ask for some help.
    In my production environnement, where I am running a cluster of several ALSB nodes, a problem showed up when a network card was unplugged on our admin server hardware.
    You have to know that for some reason, we are not using a node manager for our admin operations on the managed servers, but rather scripts that are scheduled by a tool we use for several other things (backup,etc..). This tool runs WLST scripts to do some basic stuff on our servers.
    So, during the shutdown/startup process, when we tried to bring back all the managed servers up, we faced this problem : When the managed servers were not able to contact the admin server, the startup process takes approx 2 hours, but only 10min when admin server is up and running. This is a real problem in our high availibility environnement, if we have to face this "no admin server" situation again.
    My environnement is :
    Weblogic 10.0
    Solaris 10.6.0
    Java HotSpot(TM) Server VM Version 1.5.0_16-b02
    <Jul 22, 2010 10:07:03 AM MEST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    /xx/JMSReportingProviderStartupClass.jar:/xx/SID_AMM_ALSB_SECURITY.jar:/xx/content_system.jar:/xx/p13n-schemas.jar:/xx/p13n_common.jar:/xx/p13n_system.jar:/xx/wlp_services.jar:/xx/analytics_sys.jar:/xx/commerce_system.jar:/xx/groupspace_system.jar:/xx/netuix_common.jar:/xx/netuix_schemas.jar:/xx/netuix_system-full.jar:/xx/netuix_system.jar:/xx/nf-jspcmods.jar:/xx/nf-system.jar:/xx/wlp-schemas.jar:/xx/wlp_content_system.jar:/xx/wps_system.jar:/xx/wsrp-client.jar:/xx/wsrp-common.jar>
    WebLogic Server Temporary Patch for CR382552 Fri Dec 12 13:12:27 IST 2008
    WebLogic Server Temporary Patch for 9112835 Thu Nov 12 10:53:52 EST 2009
    WebLogic Server Temporary Patch for CR368155 Mon Jul 07 15:51:15 PDT 2008
    WebLogic Server Temporary Patch for CR370311 Tue Jun 03 14:40:28 IST 2008
    WebLogic Server Temporary Patch for CR360676 Fri Apr 18 19:41:49 IST 2008
    WebLogic Server Temporary Patch for CR360117 Wed Mar 12 14:47:42 PDT 2008
    WebLogic Server Temporary Patch for CR354395 Mon Dec 10 08:10:43 PST 2007
    WebLogic Server Temporary Patch for CR345092 Wed Oct 24 11:10:56 IST 2007
    WebLogic Server Temporary Patch for CR338239 Fri Jan 11 17:14:11 EST 2008
    WebLogic Server Temporary Patch for CR328282 Thu Nov 08 13:44:54 EST 2007
    WebLogic Server Temporary Patch for CR315317 Mon Feb 25 09:45:40 PST 2008
    WebLogic Server Temporary Patch for CR315317 Mon Feb 25 09:45:40 PST 2008
    WebLogic Server Temporary Patch for CR344429 Mon Nov 26 16:11:55 EST 2007
    WebLogic Server Temporary Patch for CR351304 Thu Feb 21 10:23:22 EST 2008
    WebLogic Server Temporary Patch for CR350614 Sun Nov 11 18:02:20 PST 2007
    WebLogic Server Temporary Patch for CR344375 Fri Oct 19 11:08:33 PDT 2007
    WebLogic Server Temporary Patch for CR353586 Mon Feb 25 18:59:49 EST 2008
    WebLogic Server Temporary Patch for CR353586 Mon Feb 25 18:59:49 EST 2008
    WebLogic Server Temporary Patch for CR339736, CR346639 Mon Nov 26 18:13:36 PST 2007
    WebLogic Server Temporary Patch for CR343580 Mon Oct 29 17:41:35 EDT 2007
    WebLogic Server Temporary Patch for CR315317 Fri Feb 15 11:13:21 PST 2008
    WebLogic Server Temporary Patch for CR351685, CR320630 Thu Dec 06 14:04:31 CST 2007
    WebLogic Server Temporary Patch for CR345472 Thu Jan 17 16:13:48 EST 2008
    WebLogic Server Temporary Patch for CR355338 Mon Jan 21 13:08:48 EST 2008
    WebLogic Server Temporary Patch for CR356295 Wed Dec 19 15:37:45 EST 2007
    WebLogic Server Temporary Patch for CR348244 Fri Oct 19 11:57:37 PDT 2007
    WebLogic Server Temporary Patch for CR346064 Fri Oct 19 13:27:18 PDT 2007
    WebLogic Server Temporary Patch for CR346063 Fri Oct 05 14:48:13 PDT 2007
    WebLogic Server Temporary Patch for Cr346061 Thu Oct 18 15:38:04 PDT 2007
    WebLogic Server Temporary Patch for Cr346061 Thu Oct 18 15:38:04 PDT 2007
    WebLogic Server Temporary Patch for CR346060 Thu Oct 18 15:28:01 PDT 2007
    WebLogic Server Temporary Patch for CR350528 Fri Nov 02 16:19:36 PDT 2007
    WebLogic Server Temporary Patch for CR354048 Thu Dec 06 13:52:09 IST 2007
    WebLogic Server Temporary Patch for CR348229 Wed Oct 24 13:49:07 PDT 2007
    WebLogic Server Temporary Patch for CR362972, CR357095 Fri Mar 07 15:38:53 IST 2008
    WebLogic Server Temporary Patch for CR358677 Wed Jan 23 16:28:40 PST 2008
    WebLogic Server Temporary Patch for CR354390 Wed Feb 27 09:57:23 PST 2008
    WebLogic Server Temporary Patch for CR357287 Thu Jan 31 14:51:56 PST 2008
    WebLogic Server Temporary Patch for CR359323 Fri Mar 07 02:24:20 EST 2008
    WebLogic Server Temporary Patch for CR322355 Tue Oct 23 10:53:45 PDT 2007
    WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184 >
    <Jul 22, 2010 10:10:36 AM MEST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://xx.xx.xx.xx:xx.>
    <Jul 22, 2010 10:10:36 AM MEST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Jul 22, 2010 10:10:36 AM MEST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : xxxxxx>
    <Jul 22, 2010 10:10:36 AM MEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jul 22, 2010 10:10:36 AM MEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <22/07/2010#10:10:36.794#+0200> <Notice> <Log Management> <BEA-170019> <The server log file xxxxxxx.log is opened. All server side log events will be written to this file.>
    <22/07/2010#10:10:41.578#+0200> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <22/07/2010#10:10:42.75#+0200> <Alert> <Security> <BEA-090167> <Cannot retrieve identity certificate and private key on server xxmanaged1xx, because the keystore entry alias is not specified.>
    <22/07/2010#10:10:42.77#+0200> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the JKS keystore file /xxxkeystore.>
    <22/07/2010#10:16:02.665#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <22/07/2010#10:16:02.666#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <22/07/2010#10:45:48.374#+0200> <Alert> <ALSB Security> <BEA-387042> <There is no user password credential mapper provider configured in your security realm. AquaLogic Service Bus service account management will be disabled. Configure a user password credential mapper provider if you need ALSB service account support.>
    <22/07/2010#10:45:48.564#+0200> <Error> <ClusterTimer> <BEA-000000> <Cannot contact Admin server. Therefore constructing the Cluster Authority Current time with the time skew 0
    java.rmi.UnknownHostException: Could not discover URL for server 'xxadminxx'
         at weblogic.protocol.URLManager.findURL(URLManager.java:143)
         at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getInitialContext(RemoteClusterTimerAuthority.java:72)
         at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getTimerAuthority(RemoteClusterTimerAuthority.java:84)
         at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getClusterTimerAuthorityCurrentTime(RemoteClusterTimerAuthority.java:44)
         at com.bea.wli.timer.ClusterTimerService.clusterTimeAuthorityCurrentTimeMillis(ClusterTimerService.java:173)
         Truncated. see log file for complete stacktrace
    >
    <22/07/2010#10:45:48.567#+0200> <Error> <ClusterTimer> <BEA-000000> <Cannot contact the admin server. Therefore constructing the Cluster Authority Urzeit from the persisted value
    java.rmi.UnknownHostException: Could not discover URL for server 'xxadminxx'
         at weblogic.protocol.URLManager.findURL(URLManager.java:143)
         at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getInitialContext(RemoteClusterTimerAuthority.java:72)
         at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getTimerAuthority(RemoteClusterTimerAuthority.java:84)
         at com.bea.wli.sb.init.RemoteClusterTimerAuthority.getUrzeit(RemoteClusterTimerAuthority.java:57)
         at com.bea.wli.timer.ClusterTimerService.initialize(ClusterTimerService.java:87)
         Truncated. see log file for complete stacktrace
    >
    <22/07/2010#10:45:52.154#+0200> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
    <22/07/2010#11:54:55.765#+0200> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'ALSB Framework Starter Application'.
    RegistrationException : java.rmi.RemoteException: [Deployer:149147]Could not reach the admin server via any of its URLS: 'http://xx.xx.xx.xx:xx'.
         at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.registerHandler(TargetDeploymentService.java:166)
         at weblogic.deploy.service.internal.DeploymentService.registerHandler(DeploymentService.java:177)
         at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.register(ServerDeploymentReceiver.java:82)
         at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.<init>(ServerDeploymentReceiver.java:75)
         at com.bea.wli.config.weblogic.WebLogicConfigService$DeploymentReceiverLauncher.endOfStart(WebLogicConfigService.java:190)
         Truncated. see log file for complete stacktrace
    RegistrationException : java.rmi.RemoteException: [Deployer:149147]Could not reach the admin server via any of its URLS: 'http://xx.xx.xx.xx:xx'.
         at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.registerHandler(TargetDeploymentService.java:166)
         at weblogic.deploy.service.internal.DeploymentService.registerHandler(DeploymentService.java:177)
         at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.register(ServerDeploymentReceiver.java:82)
         at com.bea.wli.config.deployment.server.ServerDeploymentReceiver.<init>(ServerDeploymentReceiver.java:75)
         at com.bea.wli.config.weblogic.WebLogicConfigService$DeploymentReceiverLauncher.endOfStart(WebLogicConfigService.java:190)
         Truncated. see log file for complete stacktrace
    >
    <22/07/2010#11:54:56.271#+0200> <Error> <ConfigFwk> <BEA-000000> <Failed in endLoadNotification. Ignoring.
    java.lang.NullPointerException
         at com.bea.wli.sb.resources.globaloperations.GlobalOperationsResourceLifecycleListener.endLoadNotification(GlobalOperationsResourceLifecycleListener.java:112)
         at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:236)
         at com.bea.wli.config.impl.ResourceListenerNotifier.access$400(ResourceListenerNotifier.java:41)
         at com.bea.wli.config.impl.ResourceListenerNotifier$1.execute(ResourceListenerNotifier.java:151)
         at com.bea.wli.config.transaction.TransactionalTask._doExecute(TransactionalTask.java:217)
         Truncated. see log file for complete stacktrace
    >
    <22/07/2010#11:54:57.153#+0200> <Error> <ConfigFwk> <BEA-000000> <Failed in endLoadNotification. Ignoring.
    java.lang.NullPointerException
         at com.bea.wli.sb.service.ServiceChangeListener.updateAlerts(ServiceChangeListener.java:243)
         at com.bea.wli.sb.service.ServiceChangeListener.endLoadNotification(ServiceChangeListener.java:175)
         at com.bea.wli.config.impl.ResourceListenerNotifier.sendLoadNotificationsInContext(ResourceListenerNotifier.java:236)
         at com.bea.wli.config.impl.ResourceListenerNotifier.access$400(ResourceListenerNotifier.java:41)
         at com.bea.wli.config.impl.ResourceListenerNotifier$1.execute(ResourceListenerNotifier.java:151)
         Truncated. see log file for complete stacktrace
    >
    <22/07/2010#11:54:59.828#+0200> <Error> <ALSB Statistics Manager> <BEA-473004> <Cannot recover from persistent Store : java.lang.NullPointerException
    java.lang.NullPointerException
         at com.bea.wli.monitoring.statistics.collection.Collector.readPersistedRawSnapshot(Collector.java:357)
         at com.bea.wli.monitoring.statistics.StatisticsManager.onStatConfigLoad(StatisticsManager.java:347)
         at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.onStatConfigLoad(ALSBStatisticsManager.java:379)
         at com.bea.wli.sb.service.ServiceStatisticsListener.updateRuntime(ServiceStatisticsListener.java:200)
         at com.bea.wli.sb.service.ServiceStatisticsListener.endLoadNotification(ServiceStatisticsListener.java:168)
         Truncated. see log file for complete stacktrace
    >
    <22/07/2010#11:55:02.434#+0200> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <22/07/2010#11:55:02.557#+0200> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <22/07/2010#11:55:02.557#+0200> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of xxCLUSTERxx.>
    <22/07/2010#11:55:32.595#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <22/07/2010#11:55:32.595#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <22/07/2010#11:57:17.835#+0200> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on xx.xx.xx.xx:14101 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <22/07/2010#11:57:17.835#+0200> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "xxmanaged1xx" for domain "xxDOMAINxx" running in Production Mode>
    <22/07/2010#11:57:17.840#+0200> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server xxadminxx at <JMXServiceURL:null>.>
    <22/07/2010#11:57:20.13#+0200> <Notice> <Cluster> <BEA-000102> <Joining cluster xxCLUSTERxx on xx.xx.xx.xx:7001>
    <22/07/2010#11:57:20.28#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    I have a hard time trying to see what's happening here.
    If you have any input for me to use, I would be very thankful.
    And by the way, please excuse me for my poor english (french here ^^)
    Best regards,
    Serge

    As a test, I shutdown my admin server and then killed the managed server from the command line so that node manager would start it ( and not be able to find the admin server ).
    I'm using WL 10.3.3 ( 11g + OSB + SOA ) on oracle linux (64bit) and the managed server started in 3 minutes.
    So I tried the same in my 10g environment WL 10.3 running OSB 10g ( oracle linux 32-bit ) and the server started in 2 minutes.
    I see a couple of times when your trace shows a pause:
    1. when loading certificates22/07/2010#10:10:42.75#+0200> <Alert> <Security> <BEA-090167> <Cannot retrieve identity certificate and private key on server xxmanaged1xx, because the keystore entry alias is not specified.>
    <22/07/2010#10:10:42.77#+0200> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the JKS keystore file /xxxkeystore.>
    <22/07/2010#10:16:02.665#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    For this server, is the keystore alias entered in the server's SSL tab?
    2. Just after entering STARTING<22/07/2010#10:16:02.666#+0200> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <22/07/2010#10:45:48.374#+0200> <Alert> <ALSB Security> <BEA-387042> <There is no user password credential mapper provider configured in your security realm. AquaLogic Service Bus service account management will be disabled. Configure a user password credential mapper provider if you need ALSB service account support.>
    In my test, the "user password credential" message was preceded by messages about the Singleton Marker applications. Are the singleton apps deployed to this server, or to some other managed server? If they are deployed to some other managed server, are they deployed to a managed server on the same host as the (unreachable) admin server?
    <Jul 19, 2010 11:11:54 AM EDT> <Info> <WorkManager> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "ALSB Cluster Singleton Marker Application">
    <Jul 19, 2010 11:11:54 AM EDT> <Info> <WorkManager> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "ALSB Domain Singleton Marker Application">
    <Jul 19, 2010 11:11:54 AM EDT> <Info> <WorkManager> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "ALSB Framework Starter Application">
    <Jul 19, 2010 11:11:56 AM EDT> <Alert> <OSB Security> <BEA-387042> <There is no user password credential mapper provider configured in your security realm. Oracle Service Bus service account management will be disabled. Configure a user password credential mapper provider if you need OSB service account support.>
    3. activating ALSB Framework 22/07/2010#10:45:52.154#+0200> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
    <22/07/2010#11:54:55.765#+0200> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'ALSB Framework Starter Application'.
    In my test, this was logged immediately after the "user password credential mapper" message, with the following between:
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <WssModuleImpl.getInstance>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <WssModuleImpl.initialize>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <initializing WssHandlerImpl>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <WssHandlerImpl constructor>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <WssAuditor initilizing>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <auditingEnbled set to false>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <auditingEnbled set to false>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <WssAuditor successfully started>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityWss> <BEA-000000> <WssModuleImpl was successfully initialized>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityModule> <BEA-000000> <jndiLookup: [jndi-name: com.bea.alsb.internal.clusterTimerAuthority]>
    <Jul 19, 2010 11:11:56 AM EDT> <Debug> <AlsbSecurityModule> <BEA-000000> <jndiLookup: [jndi-name: com.bea.alsb.internal.clusterTimerAuthority]>
    <Jul 19, 2010 11:11:56 AM EDT> <Info> <Monitoring> <BEA-000000> <New Metadata version is 0>
    <Jul 19, 2010 11:11:56 AM EDT> <Info> <Monitoring> <BEA-000000> <New Metadata version is 0>
    <Jul 19, 2010 11:11:56 AM EDT> <Info> <Monitoring> <BEA-000000> <New Metadata version is 0>
    <Jul 19, 2010 11:11:56 AM EDT> <Info> <Deployer> <BEA-149059> <Module Dummy of application ALSB Framework Starter Application is transitioning from STATE_NEW to STATE_PREPARED on server
    The clusterTimerAuthority involves contacting the admin server in 11g, but not quite sure about 10g. ( I have a separate bug in 11g when the ClusterTime can't be reached if the admin server is using 2way SSL )
    I can't run the same test in my multi-node environments, but is it possible for you to change the targets of the 2 Singleton applications to a managed server which runs on some machine other than the Admin server's machine? Then try starting that managed server while the Admin server is down, and also try restarting another managed server ( which is not on the admin server's host and is not targetted by the Singleton applications. )
    I suspect the managed server with the singleton apps will start more quickly than the one without.

  • Server license and capacity license??

    can anyone tell me where to get capacity license???   I had just registered an account in the VMware website,then I downloaded the stagemanager software and obtained a evaluation license.but when I installed and configured stagemanager, I found that it needed two license--server license and capacity license, I only have such a evaluation license, what can I do？

    my stagemanager version is 1.0.0
    when i open the configuration page,it  prompted me to type in two license code,server and capacity.
    but i just downloaded the software with evaluation mode,and  vmware automatically gave me one license
    i have two esx servers,each has two processor

  • Move Terminal server licenses to another server

    We have one terminal server VM hosted in hyper v server. currently there is a problem with the hyper v server hdd and we might need to rebuild the whole server. We would like to setup a new terminal server on a new server. The existing terminal server is
    windows server 2003. After I fresh setup the Windows server 2003 VM in a new server, how do I move the terminal server license to a new server? FYI, we would like to decommission the old terminal server. But we would like to do it in parallel as there are
    many users are still accessing to the old terminal server.
    Thanks so much.
    Regards,
    Henry

    Hi Henry,
    First you need to gather your licensing paperwork, authorization number(s), license number(s), etc. for your existing licenses.  This step is critical.
    Next install RD Licensing on the replacement 2003 server, Activate it using Terminal Server Licensing (licmgr.exe), then install the TS CALs.  If you receive an error when installing the old TS CALs please contact the Clearinghouse and explain
    to them you need to install the TS CALs on a new server because the old one is being decommissioned.
    How to locate a telephone number for the Microsoft Clearinghouse
    http://support.microsoft.com/kb/291795
    Once you have confirmed that the old TS CALs are installed on the replacement 2003 TS then make sure your 2003 TS is set to the correct Licensing mode (to match the type of TS CALs) and you have Specified the name of the new RD Licensing server. 
    You do this in Terminal Services Configuration (tscc.msc) on the replacement terminal server.
    As an alternative you could install the existing TS CALs on a newer RD Licensing server such as Server 2008 R2, Server 2012, etc.  You still will need to have the authorization number(s), license number(s), etc. for the existing 2003 TS CALs.
    How to move Terminal Services CALs from one license server to another in Windows 2000, Windows Server 2003 and Windows Server 2008
    http://support.microsoft.com/kb/953918
    -TP

  • Help: Install "WebLogic Express Server" license

    I am having problem to install my "WebLogic Express Server" license.
    As I understand, the "WebLogic Server" and "WebLogic Express Server" use the same
    installation file, the only difference is the license. So I downloaded the "WebLogic
    Server 6.0 Service Pack 2" from BEA's web site. After the installation, I found
    a "license.bea" file under WebLogic home directory. I replaced this file with
    my license file for "WebLogic Express Server". Unfortunately, I can not start
    the default server anymore.
    Neither the "UpdateLicense" command works: it seems to me that it only merges/replaces
    the existing license with the new one. So although I "updated" the "WebLogic Server"
    license to "WebLogic Express Server" license using this command, it seems that
    I am still using the "WebLogic Server", because I can still see the EJB component
    page in the admin console.
    Did I miss something? What is the best way to check whether "WebLogic Express
    Server" has been sucessfully installed? Your help is highly appreciated!

    Hi,
    Find the Link with the screenshots of the whole installtion and domain creation process for Weblogic in all the ways
    Installing Weblogic in GUI mode - weblogicexpert
    Installing Weblogic 10.3.6 in console Mode in windows machine - weblogicexpert
    Creating Domain In GUI mode - weblogicexpert
    Creating Domain in Console Mode - weblogicexpert    
    Starting Weblogic Admin Server
    Starting/Stoping Weblogic Admin Server - weblogicexpert
    Starting Weblogic Managed Server
    Starting/Stoping Weblogic Managed Server - weblogicexpert
    Configuring Node manger
    Configuring NODE MANAGER And Starting Managed Server from Console - weblogicexpert
    Deployment process
    Deployments - weblogicexpert
    Security concepts
    Security Concepts and Hands on - weblogicexpert
    Installing Weblogic 12.1.2
    Weblogic 12c - weblogicexpert
    All other basic information are available in the blog
    Hope it helps

  • Indesign Server Licensing

    I am looking into purchasing a 3rd party product for doing dynamic date publishing using Indesign. The vendor is telling me in order to be complaint with Adobe I need to purchase an Indesign Server license even though the 3rd party application doesnt need it. It will basically sit on the shelf and collect dust. The vendor isnt even looking for us to purchase Indesign Server through, so its not like they are making any money.
    Just doesnt make sense on why I would need to purchase it. I have tried calling Adobe sales reps numerous times and either no one knows the answer or I never get called back from the people who are supposed to know the answer.
    I figured this was the best board to post this on, not sure if it would be better somewhere else.
    Does anyone have any insight into this? Any response is greatly appreciated.
    Thanks!

    I had trouble - the instructions send you down some confusing paths - but I got it working eventually. The "Installation Instructions.pdf" file indicates you need to activate the trial with Adobe Provisioning Toolkit Enterprise Edition (APTEE), but sends you to a link that says nothing about APTEE. It turns out you can find APTEE in a download called Adobe Application Manager Enterprise (AAME), which doesn't say much about APTEE, but does install APTEE in "C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\Enterprise\utilities\APTEE\CS6". You don't actually need to create a distribution package of the product installer with the UI of the installed AAME software as you might be led to believe; in the folder above is a command line tool, for which the "indesign-server-cs6-release-notes.pdf" file provides incorrect command line information regarding how to activate the 90 day trial (spurious spaces at line breaks and in command line options that are supposed to be "--" not "- -"). The actual correct command line I used successfully to activate the trial was "adobe_prtk --tool=StartTrial --leid=InDesignServer-CS6-Win-GM" .
    It really shouldn't have taken that much figuring out (especially since the InDesign Server CS6 installer itself has a UI which suggests you can just choose an option for trial mode). You can only get on the right track by reading and then ignoring the instructions, and searching around for the right download on the Adobe site.
    Glenn

  • Licensing mode for terminal services

    Hi,
    This has been most likely asked here already but i just cannot find exactly what i'm looking for. OK, here's my situation:
    We have a windows server 2008 cd installer. We already had it running before, but we got hit with a virus that we needed to re-install. Now, we are just getting things back to work again. However, we are encountering this message on our server.
                            "The licensing mode for the terminal server is not configured"
    When i tried to configure the licensing, it's asking for the license code. But i'm not sure where to find the license code? is it in the CD installer?
    Actually, i was not the one who installed the windows server before; i just took over when the server got hit with a virus.
    Also, i'm not very sure if we really need the TS CALs. Our server has multiple users from different countries, and we access the server through remote desktop access.
    Hope you can help us with this issue.
    Thank you, i appreciate it.
    Best,
    Vanessa

    Hi,
    I forgot to inform that license server has actually been activated already. So i assumed we just need to configure the licensing mode. And so, from Terminal Services Configuration, i clicked "terminal services licensing mode" and i set it to "Per User". Now
    the message "Licensing mode still not configured.." is now gone when i logged in to server. However, i get this warning on Terminal Services Configuration window:
    "Terminal server is in Per User licensing mode, but license server does not have any Windows Server 2008 Per User TS CALs installed."
    And when i checked from the TS Licensing Manager, and selected the server name, the details are:
    TS CAL Version and type: Windows 2000 Server - Built-in TS Per Device CALs
    License Program: Built-in
    Total TS CALs: Unlimited
    Available: Unlimited
    Issued: 0
    What does this mean? Should we set the TS licensing mode to Per Device instead of Per User?
    Thank you.
    Regards,
    Vanessa

  • Remote desktop licensing mode is not configured

    remote desktop service will stop working because this computer is past its licensing grace period. on the rd connection broker server, use server manager too specify the remote desktop licensing mode and the license server.

    Hi,
    You need to setup the mode of RD License Server and make sure that RDSH is pointing to RD License Server.
    Here are detailed instructions for it.
    Thanks
    Silvia Doomra

  • The server license allows connections from only 5 unique IP addresses

    Hi All,
    For a project, i did "/Installing Oracle BPEL Process Manager with the
    BEA WebLogic Server/".
    While accessing the BPEL Console from more than 2 machine, i am
    getting the following error message.
    "/The Server is not able to service this request:
    [Server:002621]Connection rejected, the server license allows
    connections from only 5 unique IP addresses./"
    I am running the " /Oracle WebLogic Server 9.2 MP3/" weblogic server,
    which i downloaded from the following oracle internal site.
    /http://www.oracle.com/technology/software/products/ias/bea_main.html/
    I have downloaded the license key from the following location.
    /http://licensecodes.oracle.com/
    /I have updated the license key using the "/UpdateLicense.cmd" /file.
    I manually checked the "/license.bea/" file it got changed
    "/expiration="never"/" mode.
    But still i wasn't able to get rid of the above error message. Still
    the license is not updated to the server.
    Regards,
    Vijay.B

    Hi James,
    Thanks a lot for your answer.
    I tried all the possible way to update the license file, i was able to update the file but the problem was not solved.
    I just tried downloading the software from another location and tried updating the license key and now its working fine, i don't see the issue.
    The below link is where i downloaded the software, you can get the license key also.
    "/http://aseng-wiki.us.oracle.com/asengwiki/display/ASHotPlug/Software+Page+-+Internal+Use/"
    Regards,
    Vijay.B

  • Lion Server licensing

    Hi All
    I am looking at running Lion server in my small office rather than a windows server. We currently have 5 macs running lion and was thingking of getting a new mac mini with the server software.
    I can't seem to find any information on buying the 5 licences I require only a volume amount. Can anyone advise how much and what I need to be buying form my needs.
    Thanks

    I'm not sure what you're looking for.
    You already have the 5 Lion licenses - they're installed and running on your Lion Clients.
    The only thing you need is one Lion Server license to install and run on the server - and if you buy the Mac Mini Server, it comes pre-installed with the Lion Server license.
    You don't need any messy client-access-licenses (like under certain other OSes). Mac OS X Lion Server is licensed by the server, regardless of how many clients connect.

  • Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

    Hi 
    Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
    How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
    For Example: if i have 4 users, A, B, C and D. what i want is:
    User A can see everything and act as a project manager or Admin.
    User B can view all projects in project centre but can change the schedule or resource assignment etc.
    User C can only act as approver of projects and can view all projects in project centre.
    User D can only view specific projects for which permissions are given.
    can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
    Thanks in Advance
    Cheers
    AJ
    Ajay Kumar

    Hi Ajay,
    Please refer to this link for detailed explanations about PS2013 security model. 
    http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
    Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
    define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
    level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
    I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
    Concerning your 4 users:
    user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
    user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
    user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
    concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
    and approves resource timesheet.
    user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
    timesheets and/or tasks updates which must be approved.
    Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

Maybe you are looking for

  • Module Pool - Table Control - Data not getting displayed in Control

    Hi, I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (foun

  • Outlook 2013 add-in will not stay enabled

    Everytime Outlook 2013 (windows) closes the add-in for iCloud changes to disabled. The only way I can sync calendars etc, is to manually enable the iCloud Add-in EVERY TIME I open Outlook.  What's up with that? It used to work perfectly. I have been

  • [SOLVED] Lyx Not Starting Up: boost regex error

    I've just installed Lyx from official repositories but It's not starting up. If i run it from terminal: [#######@archTiD ~]$ lyx lyx: error while loading shared libraries: libboost_regex.so.1.55.0: cannot open shared object file: No such file or dire

  • How To View QuickTime 7 Files

    Due to the instability that 10.3.9 causes to my Dual 867, I have humbly remained at 10.3.4. Due to my dilemma, I am not able to upgrade from QuickTime 6.5.2 to QuickTime 7, preventing me from viewing yesterday's Special Event. So I was wondering if a

  • What is sap note. where it will be used.

    what is sap note. where it will be used. what are the advantages. when it will be used