The server license allows connections from only 5 unique IP addresses

Hi All,
For a project, i did "/Installing Oracle BPEL Process Manager with the
BEA WebLogic Server/".
While accessing the BPEL Console from more than 2 machine, i am
getting the following error message.
"/The Server is not able to service this request:
[Server:002621]Connection rejected, the server license allows
connections from only 5 unique IP addresses./"
I am running the " /Oracle WebLogic Server 9.2 MP3/" weblogic server,
which i downloaded from the following oracle internal site.
/http://www.oracle.com/technology/software/products/ias/bea_main.html/
I have downloaded the license key from the following location.
/http://licensecodes.oracle.com/
/I have updated the license key using the "/UpdateLicense.cmd" /file.
I manually checked the "/license.bea/" file it got changed
"/expiration="never"/" mode.
But still i wasn't able to get rid of the above error message. Still
the license is not updated to the server.
Regards,
Vijay.B

Hi James,
Thanks a lot for your answer.
I tried all the possible way to update the license file, i was able to update the file but the problem was not solved.
I just tried downloading the software from another location and tried updating the license key and now its working fine, i don't see the issue.
The below link is where i downloaded the software, you can get the license key also.
"/http://aseng-wiki.us.oracle.com/asengwiki/display/ASHotPlug/Software+Page+-+Internal+Use/"
Regards,
Vijay.B

Similar Messages

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

When I try to submit a form I get an error massage (An error occurred during the submit process. There was a problem connecting to the server.) it seems I only get this message on a PC

When I try to submit a form I get an error massage (An error occurred during the submit process. There was a problem connecting to the server.) it seems I only get this message on a PC

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

Internet Security Warning - The Server you are connected to is using security certificate that...

Mail Client on Laptop is Windows Live Mail. Mail server outgoing.yahoo.verizon.net. DSL Internet. Long time Verizon customer. Client configuration settings correct according to Verizon. I now get an Interenet Security Warning message whenever I start up the Live Mail Client and send an e-mail. Only happens on sending e-mails. The warning message comes back looking for a YES or NO answer. The message is
"The server you are connected to is using a security certificate that could not be verified."
"A certificate chain processed, but terminated in a root certificate which is not trused by the trust provider."
"Do you want to continue using the server?" "YES or NO"
I click YES in order to successfully send e-mail messages which I do not like to do. I only have to press YES on the first e-mail message that I send. The rest outgoing e-mail work correctly after that first one.
What has Verizonn done to cause the problem on my client software? I have done nothing to change configurations on my Windows 7 and Windos Live Mail laptop. I have done some research, and verified that my computer time and time zone is correct. I am looking for an explanation on why this is happening from Verizon.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If no one has a better idea you may want to unlink Yahoo from VZ. http://forums.verizon.com/t5/Verizon-net-Email/Unlinking-Verizon-email-from-Yahoo-portal/td-p/413475 It is possible to lose data as pointed out in the linked thread.
OR Did you get any indication that your mail server settings were going to change at the end of Sept 2013? A mass email went out for "standard" verizon users earlier this year. I am not sure if this effects Yahoo/VZ settings.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.

First we have changed nothing, we have not done anything to our Yahoo or Outlook 2003 and suddenly this starts popping up all the time.
We have Windows 7, Office Pro. 2003 and use Outlook 2003 with Verizon Fios and Yahoo is our email server. This message started popping up yesterday out no where, does anyone have any thoughts about it? I have posted it on the Verizon site, however I have more faith in the help I receive here thank you.
The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.
A certificate chain processed but terminated in a root certificate which is not trusted by the trust provider.
Do you want to continue using this server?
Solved!
Go to Solution.

Did you get any email notification of a change to your email servers? So far I only found these settings from 2010
Incoming Server: incoming.yahoo.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 110
Outgoing Server: outgoing.yahoo.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): No
Port: 25
(Big thanks to SomeGirl for this info)
Are these the settings configured in outlook? If these are the setting they may need to be updated
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

How to resolve "The server is unavailable and could not be accessed. The server is probably disconnected from the network." error in Sharepoint serach crawl.

Hi all,
I have created a content source in Search service application for a particular site collection "http://spwebapp/sites".
I performed reset crawl index of Search service application and then performed a full crawl.
But i get errors on running crawl on this content source for most of the files. The error is "The server is unavailable and could not be accessed. The server is probably disconnected from the network." Though the site is accessible.
But before performing reset index the crawl was working fine on this content source. Crawl is working fine for other site collections. Only one site collection is facing this problem. Please let me know if what I can do to resolve this error.
Thanks in advance.

Are you seeing any error messages in the URL related to the Gatherer? And in your content source, are there any site URLs that are no longer active or do you have any crawl rules set up that might be affecting access to the site collection?
I've seen this happen for a variety of reason, SSL issues, proxy issues, permissions issues. The Eventvwr and ULS logs should help you narrow down the real problem.
Sometimes this is an issue because the indexer and the site are sitting on the same box, you could try doing a disable loopback check to see if that resolves the issue and if it does then go through the hassle of setting up a specific LSA :
http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

My Mac can't find the server when I connect to cable internet.

My Mac can't find the server when I connect to cable internet. Ethernet is fine, the problem is that Safari doesn't open the login/password window. Can anybody help?

The system administrator of my network has had the following solution - to help open the window for the login/password I tick "web proxy" (and enter the information for web proxy server) in "network preferences - advanced - proxies", enter the login/password and then untick it to open webpages. A little complicated, but it works, and that's the only solution so far.

SCOM 2012 Console not responding when the server to be connected is down.

SCOM 2012 Console hangs when the server to be connected is down or gone (e.g. lease replaced). How to change the 'connection server' to point to a valid server without re-installing SCOM Console? Thx

To enable high availability for your Operations Manager Data Access service, you can use Network Load Balancing (NLB)
PLz refer: http://blog.coretech.dk/kra/how-to-make-operations-manager-2012-rc-scom-2012-fault-tolerance/
Faizan

Does the Student License Allow for Two Installs?

Does the Student License Allow for Two Installs?
I have a desktop iMac and a Macbook notebook. I just purchased Adobe Web Standard CS3 (student license).
Can I install and activate the package on both of my computers? I know I could do this with a regular license, but I was unsure about the student license.
Thanks in advance.
Dave

HEEEEEELPPPPPPPPPP, PLEASE
I purchased adobe cs3 primium but i already had photoshop installed. I installed cs3 primium and now i keep getting the error that the licensing has stopped working can't use file cont IT or cust. support. I tried to download the clean file and it gives me the same error to open this file. i tried to uninstall with control panel programs and uninstall and it gives me the error uninstall not complete. I tried to repair with disc and uninstall with the disc and nothing is working. I have windows vista with 100g hd 500 mem duo core all the proper requirements but i can't get this to work.'
HELP anyone

I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last. What h

I changed my server at the end of May & all worked well until the past week end since when I am getting a message saying that I cannot get email because the server will not connect - although it does. It also claims that it was last backed up on Friday last despite having had several emails since Friday. What has happened & can I get email back to normal?

Hello Stern snapper
If you are having issues with receiving email on your iPad, then check out the article below to troubleshoot the issue. You may just need to remove the email account and add it back in.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
-Norm G.

When i get on my phone and and go to my mail it says that the server is not connected

When i get on my phone and go to email sign it says the server cannot be connected? Then when I enter for updates it goes back and forth to the icloud and apple id and arent they both the same?

where do i get answers?

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Airport Express won't connect to ONLY ONE IP-address (website)

This is driving me crazy !!!
I'm using a Airport Express (Firmware 6.3) and a G5 (1.8 DP). My internet connection through Airport works fine, but... I can't connect to ONLY ONE IP-address. No PING no nothing. Coincidently it's my own website! HELP!
When I connect my G5 directly with a cable, everything works fine.
I've given the Airport a 'Factory reset' but even this won't help. It looks like the Airport is blocking only my own website/IP-address.
Is there any solution?

I have exactly the same problem. I have been going crazy for the last two days. I upgraded and downgraded the AE firmware and nothing. I reset it to factory defaults and reconfigure it from start and nothing. All my 3 macs (G3,G4, and the macbook pro) are having the same problem and it happened at the same time for no apparent reason. From my house (were the AE is) I can access any IP except the one were my server lives (outside my house at the university). I cannot even access the university web site or my mail using IMAP from Mail.app. Traceroute ends in some place outside the university. Have you found a solution? I might have to ditch AE if this continues.
~marcos/

DI Server is Not Connected from the Client Machine

Hi all,
There was a problem to connect DI Server.But It runs on the Server Correctly.When we run on the Client Machine to connect the SAP DB, It throws an error: -111.
Code :
        cmp = New SAPbobsCOM.Company
        cmp.Server = "Sap-Server"
        cmp.CompanyDB = "FAST"
        cmp.UserName = "manager"
        cmp.Password = "manager"
        cmp.language = SAPbobsCOM.BoSuppLangs.ln_English
        cmp.UseTrusted = True
        mretcode = cmp.Connect
        If mretcode <> 0 Then
            cmp.GetLastError(merrcode, merrmsg)
            MsgBox(merrmsg)
        Else
            MsgBox("SAP B1 - Data base Connected Successfully!")
        End If
Thanks in Advance
Regards,
Suresh.G

you are not using DI server to connect, your using DI API. Check if your client machine has the DI API installed. If not you can get from the installation cd or the lastest patch installed under packages/DI API folder.

SQL Server 2008 R2 - Connection from multiple sources makes the database drop.

Hey,
I have a database being accesses from multiple sources - IIS and WPF application.
Once a user enters the website(which is connected to the database through a Connection String), The WPF application stops its communication with the database, or vise versa.
The problem being solved once I restart the IIS service or the SQL instance service.
Thanks in advanced.
Nir.

Hello Nir,
Thank you for your question. I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

The server license allows connections from only 5 unique IP addresses

Similar Messages

Maybe you are looking for