Server OSX 10.5.1 install question

I have an older Mac Server dual 1.0 ghz with 1.5gb Ram. It has a cd drive so I'm connecting it through firewire to a G4 I have. I set the server to firewire mode by holding down the T key during boot then boot off the server CD on the G4. Once the install comes up it says that I don't have enough ram. I figure I could have it select the server to install on but it does seem to allow that. I've tried using Disk Utility and it sees the Mac Server but I'm not sure how to get the installer to load on to it? Can someone please point me into the right direction? Is there a better way through an external firewire drive?
Thanks,
RJR

You can clone the installation DVD to a firewire drive and then boot from the firewire drive to perform the install. That may be the easiest method if you have an available firewire drive. If you have another server, you can make the DVD into a NetBoot image and do a network install.

Similar Messages

  • Kernal Panic upon Boot from Server OSX 10.4 Install DVD Disk

    I'm getting Kernal Panic upon booting from Server OSX 10.4 Install DVD Disk.
    I wanted to statup from the install DVD to do a repair permissions and repair disk and i'm getting a kernal panic screen. Anyone know why?
    Using a Dual 2.3 GHz Power PC G5, OSX 10.4.10, working fine.
    Will no longer boot from dvd disk, not even install cds.
    Tried other macs same deal, I can't belive that both sets of disks went bad.
    Dual 2.3 GHz Power PC G5   Mac OS X (10.4.10)   2 GB SDRAM

    Hi moeminator-
    You can start the server in FireWire target disk mode and use the drive in the Power Mac to do the deed.
    Luck-
    -DaddyPaycheck

  • SUN Java System Web Server 7.0U1 How to install certificate chain

    I am trying to install a certificate chain using the SUN Java Web Server 7.0U1 HTTPS User interface. What I have tried so far:
    1. Created a single file using vi editor containing the four certificates in the chain by cutting an pasting each certificate (Begin Certificate ... End Certificate) where the top certificate is the server cert (associated with the private key), then the CA that signed the server cert, then the next CA, then the root CA. Call this file cert_chain.pem
    2. Go to Certificates Tab/Server Certificates
    3. Choose Install
    4. Cut and paste contents of cert_chain.pem in the certificate data box.
    5. Assign to httplistener
    6. Nickname for this chain is 'server_cert'
    7. Select httplistener and assign server_cert (for some reason, this is not automatically done after doing step 5).
    8. No errors are received.
    When I display server_cert (by clicking on it), only the first certificate of the chain is displayed and only that cert is provided to the client during the SSL handshake.
    I tried to do the same, except using the Certificate Authority Tab, since this gave the option of designating the certificate as a CA or chain during installation. When I select ed "chain," I get the same results when I review the certificate (only the first cert in the file is displayed). This tells me that entering the chain in PEM format is not acceptable. I tried this method since it worked fine with the F5 BIG-IP SSL appliance.
    My question is what format/tool do I need to use to create a certificate chain that the Web Server will accept?

    turrie wrote:
    1. Created a single file using vi editor containing the four certificates in the chain by cutting an pasting each certificate (Begin Certificate ... End Certificate) where the top certificate is the server cert (associated with the private key), then the CA that signed the server cert, then the next CA, then the root CA. Call this file cert_chain.pemIn my opinion (I may be wrong) cut and pasting multiple begin end
    --- BEGIN CERTIFICATE ---
    ... some data....
    --- END CERTIFICATE ---
    --- BEGIN CERTIFICATE ---
    ... some data....
    --- END CERTIFICATE ---is NOT the way to create a certificate chain.
    I have installed a certificated chain (it had 1 BEGIN CERTIFICATE and one END CERTIFICATE only and still had 2 certificates) and I used the same steps as you mentioned and it installed both the certificates.
    some links :
    [https://developer.mozilla.org/en/NSS_Certificate_Download_Specification|https://developer.mozilla.org/en/NSS_Certificate_Download_Specification]
    [https://wiki.mozilla.org/CA:Certificate_Download_Specification|https://wiki.mozilla.org/CA:Certificate_Download_Specification]

  • Please help with this issue "To Run a SSIS Package outside of Server Data Tools You must install Drived Column of Integration sercvies of higher" From C# app

     i have searched all over the google and here on MSDN(I have read all the threads related to my problem ) , i am new to SISS and doing my clg project ,
    I have this package which loads data from  dim tables to a fact table , my Package runs without any problem in BIDS (2012)
    I have installed SQl Server integration services on SQL and service is also running in services.msc,
    the problem comes when i execute my package using my C# application i am using MSDN Method to execute a SSIS package programmatically given here.
    "http://msdn.microsoft.com/en-us/library/ms136090.aspx"
    For loading my FactTable i have used a Derived columns  and some lookups , 
    Now if i don't use derived columns and looks ups and just use source and destination component then my package runs fine from my C# application but if i use derived columns or looks ups etc it gives the following error
    "Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline: To Run a SSIS package outside of SQL Server Data Tools you must Install Derived Column of Integration services of higher"
    I am searching and trying to resolve this issue from previous 2 days but without any luck please help or guide me what is solution to this problem ,,i will be very thankful
    I have also found that integration services that are running on my system have version  10.0
    but the BIDS have version Version 11.0.3402.0
    IS this causing problem ?  if yes then what i have to do  ?

    Hi BlaxButt,
    The package is developed in SSDT installed by SQL Server 2012, so it is a SSIS 2012 package. However, the Integration Services you have installed is SQL Server 2008 R2 version. To run the package outside SSDT, you need SSIS 2012 installed. The reason why
    the package runs fine with only Source and Destination components is that such a simple package can be executed by the DTExec utility installed by SQL Server 2012 Data base Engine or Client Tools (SQL Server Import and Export Wizard). To run a package that
    uses other tasks/components outside SSDT/BIDS, the SSIS runtime is also required except the DTExec utility. To obtain the SSIS 2012 runtime, we have to install SSIS 2012 on the server where the package runs.
    Reference:
    http://stackoverflow.com/questions/19989099/getting-error-running-ssis-package-on-non-ssis-server
    Regards,
    Mike Yin
    TechNet Community Support

  • SSRS Install Question

    I have a very simple SharePoint 2013 setup, 2 web servers, 2 app servers, and one SQL 2012 SP1 server. I have been asked to integrate SSRS into the farm. My DBA has installed SSRS in integrated mode on the SQL server. However when I run Install-SPRSService
    from the SP Management Shell on my app servers, I get an error stating that is an unrecognized command. All the documentation I can find on this topic only discusses a single server SharePoint setup (WHO DOES THIS?).
    I tried to download and install the SQL Reporting Services add-in on my App server. This
    seemed to fix the unrecognized command issue, but then I get an error when creating the service application for SSRS that states there is a missing registry key (Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry
    key).
    So my question is, what am I missing? Are there additional installation components that are required on my SharePoint servers? If so, what needs to be installed on which server (WFE & APP).
    Thanks

    Hi there,
    Can I just check, The SSRS server that the DBA has installed in integrated mode, is that on a server that has the SharePoint binaries installed and has been added to the farm?
    If it hasn't, then it needs to be.
    Once this has been done and you've created the service application and proxy using the commands on Steve's blog, you then need to add the Reporting service plug in on all servers that will be hosting pages. (Bare minimum your WFEs)
    Paul.
    Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

  • Installing SSMS 2012 after SQL Server 2008 R2 Express was installed (without tools)

    Hi everybody,
    This is a question in another forum I am frequent. Someone installed SQL Server Express 2008 R2 and he used the wrong exe, so he installed it without tools. Now he wants to install SSMS.
    It looks like SSMS 2012 wants to have SQL Server 2012 Express installed first.
    Can someone please confirm if it's possible to install just SSMS 2012 after SQL Server 2008 R2 Express was already installed and if possible, guide through the installation steps?
    Thanks a lot in advance.
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

    Hi Naomi,
    Agree with Shanky.
    I have tested the scenario you described. Everything works well, I successfully install SQL Server Management studio 2012 after SQL Server 2008 R2 Express (without tools) was already installed.
    Please note that we don’t need to install SQL Server 2012 Express first when installing SSMS 2012. For detailed installation steps of SQL Server 2008 R2 Express and SSMS 2012, you can review below blogs.
    How to Install SQL Server 2008 R2 (Express Edition)
    SQL Server Management Studio – A step-by-step installation guide
    In addition, we can use SSMS 2012 to manage SQL Server Express 2005 /2008 /2008 R2, the tool is backward compatible.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • OSX 10.7 Lion Install Disk

    Hello,
    I want to place a new SSD HDD in my Macbook Pro 13, but I am facing the problem that I do not have an install disk for the new installation of OSX.
    I found some tutorials which described that I have to download the App "OSX Lion" from AppStore and burn the imagefile "InstallESD.img", which is included in the App, to a dvd and from this disk I can install a whole new system.
    Since Mountain Lion is released I cannot find "OSX Lion" anymore in AppStore. There is just an App named "OSX Mountain Lion".
    Is there a way to get a OSX Lion install disk or do I have to buy OSX Mountain Lion to install a new system?
    Regards,
    Andreas

    Hmm - you face a dilemma. My MBP shipped with Lion, as well, but it still shows up on my Purchases tab because I did actually purchase it just to make a bootable USB flash installation drive. You don't really need to do that, however. What you should do it to save the $20 you'd spend on Mountain Lion and buy a USB drive enclosure. I bought mine from OWC. Here's a user tip on installing a new SSD in place of a hard drive using an enclosure and Carbon Copy Cloner.
    It's very simple, actually:
    Buy enclosure. Install SSD in enclosure;
    Boot from your internal drive. Format your SSD as "MAc OS Extended (Journaled)" with a single GUID partition using Disk Utility.
    Use Carbon Copy Cloner to clone your internal drive to your new SSD.
    Swap drives and boot from your SSD.
    Pretty simple, hunh?
    Any more questions? Let us know.
    Clinton

  • Oh no i need to install tiger server but i lost the install disks.

    Oh no i need to install tiger server but i lost the install disks. I also could use Leopard server on another mac.

    Yikes!... they sure want a lt for it...
    http://www.ebay.com/sch/i.html?_nkw=mac+osx+tiger+server
    http://www.ebay.com/sch/sis.html?_nkw=Apple+Mac+OS+X+Leopard+Server+10+5+4+10+Cl ient+MB606Z+A

  • Mavericks install question

    Hello Apple Community -
    I have a mid-2010 MacBook Pro (7,1) in which I'm installing a new HD.
    The question is which OS to install and how - I've misplaced the original OSX 10.6.8 install disk.
    One option is to make an appointment at an Apple store (I'm in New York City) and ask them to do the install - a reinstall of 10.6.8 or a later version.
    Question - would it work to boot the MacBook from an external HD I have which has OSX 10.6.8 on it, and use that to get the MacBook to download & install Mavericks?
    I don't use any special software, so I'm thinking that upgrading software for the new OS won't be a big issue.
    Thanks to all who take the time to view and possibly respond to this question!

    Not sure what you mean by "special software."  Do you want to continue to use any software, or are you prepared to purchase a new software library for your Maverick system? 
    For example PowerPC apps that you may be using in Snow Leopard will NOT work in Mavericks (without further advice).
    I would recommend a two partition approach:
    Install Snow Leopard into one partition and migrate your original applications and files to that partition; or
    Question - would it work to boot the MacBook from an external HD I have which has OSX 10.6.8 on it, and use that to get the MacBook to download & install Mavericks?
    You can use cloning software to move all of your files from the Snow Leopard HD over to the new Snow Leopard partition.
    Install Mavericks into the new partition.
    DO NOT INSTALL MAVERICKS over your old Snow Leopard HD, as this may cause you hours of grief to rectify!
    Dual-boot into whichever flavor of OS X you prefer to use and "experiment" with Mavericks for now.
    Lastly, would you please attempt to boot your 2010 MacBook Pro from your white retail Mac OS X Snow Leopard Install DVD (and even install Snow Leopard, if you have the time) and report back your results to the other post you made today.  Thank you!

  • How many sql server express instances i can install maximum in single system

    Hello Team,
    I want to install multiple sql express instances in single machine. My question is that how many instances of sql server express editions i can install in single machine ? 
    Thanks,
    Udaya Kumar
    udaya kumar

    For practical reasons as much as you like you probably would not exceed in any case 10 instances because after that resource crunch would start but any how you can read Max specification for SQL Server
    More accurate answer is "50 instances on a stand-alone server for all SQL Server editions."
    https://msdn.microsoft.com/en-us/library/ms143432.aspx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

    I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
    Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
    Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
    Error: 17750, Severity: 16, State: 0.
    Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

    Hi JFriedley,
    According to your error message, there might three reasons for this issue.
    xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
     edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
    Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
    files.
    There is a similar issue about error 17750, you can review the following article.
    http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
    Regards,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Team Foundation Server 2013 update 4 New Install - Error 503 Service Unavailable for Sharepoint Central Admin

    Hello,
    I ran a new install of Team Foundation Server and let it install the built in SharePoint pieces on a single server setup. After the install i'm able to access the
    http://teamfoundation:8080/tfs/ address without issue but am unable to create a project. When I attempt to create a project I get the following error:
    TF30172: You do not have permission to create a new team project (when checking security i'm a member of the project collection administrators and Team Foundation Administrators)
    This led me to look at the sharepoint central administration site where I receive the following error:
    Error 503 Service Unavailable
    I've gone through and validated the identity is set correctly in IIS for the following services:
    SharePoint Central Admin v4
    SharePoint15AppPool
    The SharePoint Web Services Root is set as LocalService instead of the domain user.
    The identity domain user is setup as local administrator on the Team Foundation Server. They are all set to use .net v4.0.30319 with integrated Pipeline mode.
    Any help would be great!
    Thanks!
    Eric

    Hi Eric,      
    Thanks for your post.
    Please share your detailed team project creation log here.
    In your TFS Admin Console>>Extensions for SharePoint Products tab, ensure SharePoint Web Application shows correctly in the right panel. And go to TFS Admin Console>>Application Tier>>SharePoint Web Applications tab, ensure your SharePoint
    web application displays in the right panel, then select your SharePoint web application and click Repair Connection, ensure can repair successfully.
    In your IIS Manager, select your SharePoint Central Administration V4 site and click Browser:17012(http) in the right panel, check if your SharePoint Central site can be opened successfully or not. If your SharePoint Central site cannot be accessed, I think
    this issue relate to your SharePoint site, you should contact SharePoint experts to resolve this issue first. After you resolved this issue and your SharePoint Central Admin site can be accessed correctly, then try to create your team project(within SharePoint
    site) again, if there still has issue when creating team project, please share the detailed error message here, we will try to resolve it.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.

    Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
    I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497 
    Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
    I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
       Please see the Brief of the Issue.
    I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
    crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
    VirtualBox machine installed on it 've No issue, they work fine  But the host OS is not fine. as there are lots of
    errors in .xsession-errors. which i 've pasted below.  And Unable to Install the sabayon-apply rpm that could have fix the Issue.
    I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
    Please see the following Brief of the Issue.
      after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
      While installing the rpm i 've inadvertantly issued or run  this command
      rpm -ivh *.rpm --force --nodeps  as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
        After That I could Not Install any rpm with yum or rpm command as getting the Same Errors. 
    while trying to install individual rpm am getting the followig Errors
    [root@ebs Packages]# rpm -ivh libX11*
    error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
    error: libX11-1.3-2.el6.i686.rpm cannot be installed
    [root@ebs Packages]# rpm --checksig gtk2*
    gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
    For that I tried to import the RPM GPG Key But still faced the same errors
    [root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
    C55B 9086  313D 72F9 7B74 EC55 1F03
    --2013-10-08 00:04:56--  http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
    Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
    Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 1011 [text/plain]
    Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
    FINISHED --2013-10-08 00:05:06--
    Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
    100%[===========================================================================================================================================================>]
    1,011 --.-K/s   in 0s
    2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
    saved [1011/1011]
       Than i run this command
    [root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle  ----it Returns with no output
    [root@ebs yum.repos.d]#
    [root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
    gpg-pubkey-ec551f03-4c2d256a
    But still I can't install the rpms, got the same Errors. please see the following
    [root@ebs yum.repos.d]# yum install firefox*
    Loaded plugins: refresh-packagekit, rhnplugin
    This system is not registered with RHN.
    RHN support will be disabled.
    Setting up Install Process
    Downloading Packages:
    (1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
      |  25 MB     03:42
    (2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
      |  14 MB     02:03
    Total
    117 kB/s |  39 MB     05:46
    error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
    Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
    [root@ebs log]# rpm -qf `which gpg`
    error: rpmdbNextIterator: skipping h#     455 Header V3 RSA/SHA256
    Signature, key ID fd431d51: BAD
    [root@ebs log]# gpg --list-keys
    /root/.gnupg/pubring.gpg
    pub 1024D/11F63C51 2002-02-28
    uid Jamie Cameron <[email protected]>
    sub 1024g/1B24BE83 2002-02-28
    pub 2048D/671DF296 2013-10-08
    uid oracle
    sub 2048g/9FE459CE 2013-10-08
    pub 1024R/F3A5AC78 2013-10-08
    uid oracle (no comment) <[email protected]>
    sub 1024R/6DC65985 2013-10-08
    pub 1024R/78F6C944 2013-10-08
    uid root user (Example GPG Key Signature For RPM
    Packages) <[email protected]>
    sub 1024R/77C97AFF 2013-10-08
    [root@ebs log]# rpm -qi 'gpg-pubkey-*'
    Name : gpg-pubkey Relocations: (not relocatable)
    Version : ec551f03 Vendor: (none)
    Release : 4c2d256a Build Date: Wed 09 Oct
    2013 01:09:10 AM IST
    Install Date: Wed 09 Oct 2013 01:09:10 AM IST      Build Host: localhost
    Group : Public Keys Source RPM: (none)
    Size : 0 License: pubkey
    Signature : (none)
    Summary : gpg(Oracle OSS group (Open Source Software group)
    <[email protected]>)
    Description :
    -----BEGIN PGP PUBLIC KEY BLOCK-----
    Version: rpm-4.8.0 (NSS-3)
    mQENBEwtJWoBCACpiY2rGA6T0ceBi92X88/QclytVBjtDRohOVzs3pmIPh3ULqsW
    G323nmyKbKQBBSjh9OnuO9Y09VG8mzr/w9YV0Ix4cI9/HDTERZ2+TR5u+VNn5J5h
    yvwQSN/FEK6oH2+mz7O0yUNleN7UltR4MOEkHIoAhIvv+1AQQKN3OM8oalz+3gv/
    zz9rAoQczQzT7QWOtBrsRMZgBrKXY/TpJrpVSO3Hx8CnbhKGtLxCCrxZ5v7hh1ht
    3CRAr2+h5bDA9KP6vBZWKEs7NgcvtZFDY6EJc7AoApr3phX9hHE2+snTxe82DkFT
    uA69C8wLyjPCoSy+tcaCqJKOZelNy9RN/WKRABEBAAG0RE9yYWNsZSBPU1MgZ3Jv
    dXAgKE9wZW4gU291cmNlIFNvZnR3YXJlIGdyb3VwKSA8YnVpbGRAb3NzLm9yYWNs
    ZS5jb20+iQE8BBMBAgAmBQJMLSVqAhsDBQkWjmoABgsJCAcDAgQVAggDBBYCAwEC
    HgECF4AACgkQcvl7dOxVHwMiNAf/cD8R74fCBeQsAYid5slIz7CG8xEOBUTDNEJT
    p/owtzr7m7Ydp1txNBOkVeVkUP8czX5EldcmoxA4kCCyHhnxmpJnOt52Fy5ZRnYh
    Ll5gYdpJpXGVScB7fnlh3rJAaesSTacVFC5MKIYPZBiTo9soSXMLNcG8WqHPasdd
    AblC4t5BTDNYlX1RiPeP6m5egHnnxyAXsis8fqIZY0RC9hERxWQ6hdDAX0tJXY8F
    88HDUozvo8jqTlg/5GZcfqcbUjjMUJQ5cBtH3adCthMycdPpPXWJQBuzMIdFJ03u
    YuQ3XrKxBkOLips+OZuWNVZzrPOHsenb49aX4yQsLVc2E2fhKQ==
    =M8XY
    -----END PGP PUBLIC KEY BLOCK-----
    I 've tried to remove the existing keys But Not able to remove them as well.
    Is this the right way of removing the keys ?
    rpm -e --allmatches 'gpg-pubkey-ec551f03-*'  the ec551f03 is the
    version of rpm -qi 'gpg-pubkey-*' query...  Please correct
    Could you tell what I am missing here that's causing the Issue.
    Following are the Errors that is observed in .xsession-errors log file
    ===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
    MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
    user 'root' found
    MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
    Exiting abnormally.
    MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
    recent call last):
    File "/usr/sbin/sabayon-apply", line 149, in <module>
    sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
    SystemExit: 3
    ===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
    This configuration for the debug log can be re-created
    by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
    (use ';' to separate domain names):
    [debug log]
    max lines = 1000
    gnome-session[3707]: EggSMClient-WARNING: Desktop file
    '/etc/xdg/autostart/esc.desktop' has malformed Icon key
    'esc.png'(should not include extension)
    GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
    SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
    Failed to play sound: Not available
    (polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
    cannot register existing type `_PolkitError'
    (polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
    g_once_init_leave: assertion `initialization_value != 0' failed
    W: main.c: This program is not intended to be run as root (unless
    --system is specified).
    ** Message: applet now removed from the notification area
    ** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
    started as root for security reasons.
    08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
    08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
    08/10/2013 06:34:26 PM Autoprobing selected port 5900
    08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
    08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
    Initializing nautilus-gdu extension
    Initializing nautilus-open-terminal extension
    ** Message: applet now embedded in the notification area
    Connecting to deprecated signal
    QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    Connecting to deprecated signal
    QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    Connecting to deprecated signal
    QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
    specified for 0x4e00019 (Restore Se).
    Object::disconnect: Unexpected null parameter
    QObject::connect: Cannot connect (null)::activePartChanged(
    KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
    kio_http_cache_cleaner: Already running!
    Object::disconnect: Unexpected null parameter
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
    specified for 0x5200019 (Restore Se).
    Object::disconnect: Unexpected null parameter
    QObject::connect: Cannot connect (null)::activePartChanged(
    KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
    Object::disconnect: Unexpected null parameter
    QObject::connect: Cannot connect (null)::activePartChanged(
    KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
    Object::disconnect: Unexpected null parameter
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
    specified for 0x4e08cb7 (timesofind).
    libpng warning: Extra compressed data in IDAT
    Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
    specified for 0x4e0a6e3 (Server Aut).
    Highly appreciate the response.
    Thanks And Regards
    MZ

    The Packaged are already there on the server as the RHEL software DVD is copied on the server.
    Yes it was working before the crash, And Even after the Crash i.e
    after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
      and was in the process of installing the sabayon rpm i 've inadvertantly issued or run  this command
      rpm -ivh *.rpm --force --nodeps  from RHEL software Packages directory.   
    and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
       After that I could Not install any rpm from rpm or yum command.
       I 've  Downloaded the new sabyon*  and Other rpms from the net and tried to install them with rpm or yum command but
        got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD 
       with yum am getting this error
       error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
      I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
      The Reinstallation of OS is not AN Option for me rightnow.
       Could you tell something which i could try & may be that works.
    Thanks
    MZ

  • Terminal server does not have any installed licenses

    Good morning! Faced with a some trouble while configuring Terminal Server (Windows Server 2012 based). I selected licensing mode "Per User" and now I see this message:
    “The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server “server name” does not have any installed licenses with the following attributes:
    Product version: Windows Server 2008 or Windows Server 2008 R2
    Licensing mode: Per User
    License type: RDS CALs”
    So this is trial using of terminal server - I have 25 days yet but already today I can't connect to server using RDP. There is an error message about absent licensing server. How can I activate licenses in trial mode? Thank you for support.

    Hi,
    Thank you for posting in Windows Server Forum.
    From the error description it seems that your issue caused by setting up different Licensing mode. We need to install the proper RDS CAL on the License server.  If the license server has installed licenses of the other mode, changing the licensing mode
    for the terminal server may also resolve the issue. 
    To change the Licensing mode we can use RD Licensing diagnoser or by PowerShell command. 
    To change the licensing mode on RDSH/RDVH:
    $obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
    $obj.ChangeMode(value) - Value can be 2 - per Device, 4 - Per user
    Please refer below article for information.
    RD Licensing Configuration on Windows Server 2012
    http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
    Have you installed License server on Server 2012 and you have RDS CAL of Server 2008 R2?
    If that’s the case then first you need to purchase the RDS CAL for server 2012 and then you can configure on server 2012 because server 2012\R2 RDS CAL can work with lower version OS but Server 2008 R2 RDS CAL can’t work on Server 2012\R2.
    Please check computability matrix.
    RDS and TS CAL Interoperability Matrix
    http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • My daughter has a 2002 intel running Tiger and I want to update it to Snow Leopard. I get an error message that OSX can't be installed on this system. Please help!!! Thanks

    Hi,
    I'm having a really hard time here.
    I want to update my daughters intel from Tiger to Snow Leopard for her to make her life (and mine) easier.
    When I try install the OS, I keep getting an error message that OSX can't be installed on this Mac.
    What's going on?
    Never had so much trouble before.
    Please help.
    Thanks so much

    You're welcome. Please note that it is a little more difficult to obtain Snow Leopard these days. Please see the post by Kappy at the link below.
    https://discussions.apple.com/thread/4164689?start=0&tstart=0

Maybe you are looking for