Server Setup Wizard / CiscoWorks Assistant - Unable to find Server

I just performed a clean install of Ciscoworks LMS 3.2 on our HP Bl460c server, Win2003 R2 SP2 Enterprise,
8 GB RAM, 146 GB HD, all Windows Updates installed (including ie8), no ciscoworks patches installed.
No errors during the install. I restarted and logged in. I clicked on Server Setup (under Setup Center
on the LMS portal) as indicated in the deployment guide. I put in "admin" as the username and typed the admin password.
The window opens and shows "Collecting existing server information. Please wait"
after about 5 minutes, I get ERROR - Server Discovery timed out. Please try again later.
I'm stuck there. All ciscoworks services are running according to "services.msc" in windows.

Whether or not a sound system is plugged into the Airport Express has no influence on the generation of this error message by the Airport Setup Assistant.
I have a distinct feeling I'm going to be reiterating everything the people at Mac support told you to do (so it would be helpful to tell us at the start what you have tried thus far to solve the problem) but the next thing I would recommend is a factory default reset of the Airport Express per:
http://docs.info.apple.com/article.html?artnum=108044
The other thing that can cause all sorts of grief is any non-Apple firewall software you might have installed on this Mac - that includes firewalls, "internet protection" software, and VPN client software. The MacOS built in firewall is OK - but all this other baggage should either be disabled or uninstalled.

Similar Messages

Setup Assistant unable to find base station

Ok I am new to wireless so here goes. I have a iMac G5 2.0 running 10.4. I just bought the base station today. I am trying to use dsl with PPPoE. I have checked those settings about a 100 times. The same settings and cable I am using to post here to this forum thru ethernet.
I plug in the base and when I get the flashing amber it is recognized in the internet connet app with a full signal strength. If I try to connect it tells me it cannot locate the server.
When I try the setup assist app and select 'Set up a new Airport Base Station' and hit continue. it immediately say it found a new Airport Express base station and includes the name. But when I hit continue again it takes a minute to think the brings up a error message. '...unable to find your base station.
I also come up empty with the Airport Admin utility. Nothing shows in it.
I hope someone can help. Thanks.
Jeffrey Dalton

Whether or not a sound system is plugged into the Airport Express has no influence on the generation of this error message by the Airport Setup Assistant.
I have a distinct feeling I'm going to be reiterating everything the people at Mac support told you to do (so it would be helpful to tell us at the start what you have tried thus far to solve the problem) but the next thing I would recommend is a factory default reset of the Airport Express per:
http://docs.info.apple.com/article.html?artnum=108044
The other thing that can cause all sorts of grief is any non-Apple firewall software you might have installed on this Mac - that includes firewalls, "internet protection" software, and VPN client software. The MacOS built in firewall is OK - but all this other baggage should either be disabled or uninstalled.

Setup WIzard error. Unable to connect to the Router.

All the connections are correct. I am able to connect to IE and FireFox with ethernet and connected my nook via 'Linksys'. I opened using ISP address and set up security. Is there more in the setup that I need to do?
Solved!
Go to Solution.

Hi. Are you still getting that error after you setup everything on the router? Is wired internet working already? Are you replacing an old router? If you still encounter that error, you can download the updated software version for your router. It is best to wire your computer directly to the modem for that and run it from there. You may have to reset the router back to defaults by pressing its reset button down for 15 seconds so that you can start afresh with the setup. I have here a link for you that might help you regarding the software:
Cisco Connect error codes
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=8c48ffab84714adb992ca2bf5dd9a529_Cisco_Connect_Er...

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit

Hi
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
Please provide the dowload links.
Thanks

Please follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
best regards,
Thiago Leôncio

Unable to find Setup Wizard on my 8700

Having got a refurb 8700 BB so we can use with our customer's systems if necessary, I am unable to find the setup wizard to setup BIS, the phone is a 8700g and in Advanced Options it says Blackberry 4.1 system software.
I have confirmed with the carrier that i have got BIS activated, and have recieved applicatins like googletalk, Yahoo messenger etc, and can get on the internet, but have no option to setup emails.
Tried wiping the device but no luck.
Can somebody help?

1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site.
From your handheld device: http://www.blackberry.com/btsc/KB15402
From your desktop PC: http://www.blackberry.com/btsc/KB02830
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I keep getting 'unable to find requested server' while trying to go on internet

I bought the Blackberry curve last week and have had pblms connecting to home wi fi. I have it all set up and the fone recognises the wi fi on it and only let me connect once to the wi fi. After that it keeps coming up with the message - unable to find requested server - even though it did work once the first time after I had set up the wi fi wizard. I had put in the key. Can someone help please.

Hi gerrybl,
Welcome to the Suppport Forums!
Can you provide more information please?
Do you have a data plan with your wireless provider that includes internet browsing?
Are you able to complete all the steps in this blog post to connect to Wi-Fi? http://bbry.lv/oXh7oV
Are you able to connect to any other Wi-Fi networks or Hotspots?
Thanks,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Unable to find requested server

have a contract with a data plan but when I try to use my wifi at home it says that I am connected but when I go to the internet brower it tells me "Unable to find requested server". This only happends on my wifi at home. My other devices work without a problem on my home wifi. What do I need to do to get my Blackberry Torch 9800 to work off from my home wifi?

I had this problem untl I setup a Hom Network that included my smartphone which shows up with it's own separate IP address. My office PC is the host and it is ethernet or wired network. I have 2 wire gateway wifi modem and all is supported by my carrier. I feel confident if you contact your ISP and ask for help in setting up a Home Network your problem will be solved. Btw, make sure your wireless Customer Service is informed by their Internet Service Support and by yourself. Good luck

Unable to find HP 8610 during setup

Running Windows 7and I am just trying to set it up wirelessly. I have tried everything listed on the HP 8610's support page and still have had no luck. I have tried opening the IP that the printer is giving me in chrome and I get
Oops! Google Chrome could not connect to 192.168.2.11
Try reloading: 192.168.2.11
Thanks in advance

Hello there! Welcome to the forums @Woodya34
I am hoping to help you out with the connection issue you're having with your Officejet 8610.
First I would suggest power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Try entering the printer's IP address in a web browser again to see if you can reach the embedded web server.
If you are still not connected, run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue and tries to fix them for you and might connect the printer again. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please take note of the results and let me know what they said.
If the connection issue still lingers, try restoring the network defaults on the printer and run the Wireless Setup Wizard again on the printer to connect to your network (make sure it's the same network the computer is connected to).
Select Setup Menu, Network Setup, Restore Network Defaults, Yes
Restart the printer
Select the Setup Menu, Network Setup, Wireless Setup Wizard
Run the Print and Scan Doctor again.
Let me know the results, good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Error message - Unable to find proxy server - how can I solve this problem

When I try to enter some sites I get the error message: Unable to find the proxy server, Firefox is configured to use a proxy server that can't be found. This happened suddenly and I'm not sure why or how I can fix it, it doesn't help that most help site are blocked. Im using a Mac 10.5.8 and Firefox 15.

You can check the connection settings.
*Firefox > Preferences > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

"Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct". Performance Point Dashboard Designer (SP 2013), SSRS 2012 Report.

Hello Everybody,
I am using Sharepoint server 2013 , SQL Server 2012 SP1, PerfomancePoint and Reporting Services in SharePoint integrated mode.
I built one report in SSDTusing an Analysis Services Cube. This report has 3 parameters. So the idea is use Dashboard Designer to use this SSRS Report and connect it with some PP Filters.
The issue is that I am always obtaining "Unable to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have the following settings in the PP Report:
Server Mode: SharePoint Integrated
SharePoint Site: http://MySharrepointSite:PortNumber/sites/bicenter
Document library : Documents (selected from drop down, my report is deployed to document library)
Report : report.rdl
When I select the report from drop down list its giving the error in a pop up message box as "Unable
to find report specified by URL,Please verify that both Server URL and Report URL are correct".
I have tried to use the most simple report, only with one parameter, but is always displaying the error above.
When I open the report directly from documents library its working fine and even it is working fine (
when I deployed the report) but the issue is parameters are not showing.
Any idea? Please help.
Thanks in Advance.

"Unable to connect to the server at CALYSTO\ReportService.
Hello Tom,
It should be "ReportServer" in the URL, not "ReportService".
In "Reporting Service Configuration Manager" look up the correct URL. Open Internet Explorer with right-mouse click => "Run as Administrator" and open the URL, this should work. Navigate to "Side setting" (on top right side),
go to tab "Security" and add your account with role "System Administrator". Afterwards you should be able to open the URL without running IE as admin.
Olaf Helper
[ Blog] [ Xing] [ MVP]

My Master server is stopping automatically unable to find out the issue

Dear Experts,
My Master server in CMC is stopping automatically and is going to infinite stop state.when i again restart manually its connecting but again it is stopping.what may be the cause unable to find the solution
Thanks in Advance,
Regards,
Vinay.G

Go to the Tomcat site and read the "First Web App" docs. I'm sure you didn't deploy your servlet properly.
%

Unable to find the workbook on server while accessing woekbook

I am opening in query in Bex analyzer
After getting the result , I am saving the file as workbook in favourites folder
It is not giving any error. When I try to open the workbook It shows me the name in the favourites folder, but gives error "Unable to find the workbook on server"
If I close the Bex analyzer and open again, its now showing the file in favourites folder meaning file was not saved on the server. I tried with sap_all authorization
Please help

Hi,
I got the same problem as yours. But if "sap-all" given, it works. I do not want to give this authorization to all users, so would you pls tell me your final solution?
Thanks a lot.
BR.
Angela

Unable to find workbook in the server

When we run 3.x workbook in 7.0 we are getting the following pop-up 'Unable to find workbook in the server'. We were able to open the workbook in the 3.x. Did any one face the same issue.The trace showns authorization are good. Pls. Help!!

Hi,
on thing I noticed... SP 13 is not that stable...
Hint: ask your technical guys to implement support pack 14... I think your problem will be solved then... because you say you only have this problem since you upgraded...
Ciao
Joke

Server Setup Wizard / CiscoWorks Assistant - Unable to find Server

Similar Messages

Maybe you are looking for