ServerLockManager required modules?

1. What are the minimum required modules to run a dedicated instance for your ServerLockManager?
2. Does a dedicated ServerLockManager instance actually need to be assembled and started with your custom modules? Even if you have custom repository changes, does the ServerLockManager need those custom repository definitions?
I couldn't find any documentation explaining if the ServerLockManager actually communicates with the underlining database for the repositories items it's locking. It doesn't seem like it would need to communicate with the underlining database. If that is the case, then it seems like you could configure your dedicated ServerLockManager with only the essential modules and configurations it needs to run. By doing this it would simplify your deployment process. Meaning if your ServerLockManager doesn't contain any custom modules, then you would never need to bring it down during deployments. Am I way off base here?

There are no pitfalls of using it. We have configured this way in a cluster of 120 servers and it worked great.
Most of the clients deploy the same ear as Customer Facing server and would add this server as regular deployment plan to deploy code and restart server.
Peace
Shaik

Similar Messages

Plugin requires module?

Was going to try this plugin I ran across here:
http://code.google.com/p/geotag-lightroom-plugin/
Anyhow, it suggests that in install there should be a 'module' folder but
when I browse to mine (yes... right location), I don't see this folder. Am I
supposed to create one if not there as I had to initially do with 'web
galleries' folder? Am I missing something here?
Thanks for your assistance on this!

Yes create one and install the plugin in that! If it had an installer, it would probably create one!

HP Quality Center - Version 11 - Requirement Module View Filtering

Hello,
Is there a way to set a filter view to apply to all users based on the User Name/ID and requirement status? I would like to set the requirement view to only display active requirements assigned to the user signed on. It would be great if I can set up the filter or add code under the script editor where it will display automatically or can be added as a public favorite that anyone can use.
Any help is greatly appreciated.
Thanks.

Hi,
Please check the following link:
http://h30499.www3.hp.com/t5/Quality-Center-Support-and-News/Upgrading-to-QC-11-or-ALM-11/td-p/23917...
I remember we had to pay for the upgrade.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Required module pool programming sample exercises to learn MP urgent

sample exercises to learn MP urgent if any one having please send it to me.
Thanks

Please refer to the links below. Reward points if useful.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCDWBTUT/BCDWBTUT.pdf
http://help.sap.com/saphelp_40b/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/applet.htm
Have a look at these good links-
http://www.allsaplinks.com/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://sap.mis.cmich.edu/abap-00/
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://help.sap.com
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://www.sapbrain.com/TUTORIALS/default.html
http://www.sappoint.com/abap/spmp.pdf
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/abap/
http://www.sap-img.com/
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.allsaplinks.com/dialog_programming.html
http://www.sapgenie.com/abap/example_code.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm

LoadLibrary failed with error 126: cant find the required module

Hi,
We have a new laptop, and have just installed Adobe Premier elements 10. It´s Windows 7 64-bit, and we have a AMD Radeon HD 7670M grafic card in it. and we get the above error as soon as we try to start it up by chosing to start a new project.
Please help us!

Premiere Elements has its own forum where someone will be better able to help you:
http://forums.adobe.com/community/premiere_elements
Ken

File adapter custom module problem

Dear All,
Currently my file adapter is picking up a flat file and I have writeen a module which will remove junk characters from the start of the file...I have also used FCC to convert the flat file to xml.
now my question is what is the sequence...
1. is it that my FCC will convert the flat to xml first and then the module will get xml as input
2. or is it that module will get the flat file as input , it will perform the maipultaions and then my FCC will be called to convert it to xml
Actually after running the scenraio what we can see in the audit log is
1.flat file converted ok and then
2.processing module
My requirement : module should get a flat file as input and then that module will remove junk char..after this standard FCC should convert it to XML

1. is it that my FCC will convert the flat to xml first and then the module will get xml as input
first FCC will get executed then MODULE
My requirement : module should get a flat file as input and then that module will remove junk char..after this standard FCC should convert it to XML
Dont use FCC just read .txt file after removing junk character buid the XML file using DOM parser in the MODULE itself.

[Solved] Missing iptables modules

In an attempt to secure my Arch machine, I've discovered that I am missing several iptables modules that are "supposed" to be there.
Here is the list of available modules.
$ sudo cat /proc/net/ip_tables_matches
udplite
udp
tcp
icmp
As a major n00b in the iptables (and networking), this was the first place I've looked.
Kernel: 3.19.2-1-ck
Iptables: v1.4.21
I can find more information if needed.
Last edited by Jakkin (2015-03-23 03:07:44)

iptables will load all required modules dynamically. I think in /proc/net/ip_tables_matches are only the currently required modules:
# cat /proc/net/ip_tables_matches
icmp
# iptables -nvL
Chain INPUT (policy ACCEPT 24 packets, 14898 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 21 packets, 3257 bytes)
pkts bytes target prot opt in out source destination
# iptables -A INPUT -p tcp --dport 17500 -j REJECT --reject-with icmp-port-unreachable
# iptables-save > /etc/iptables/iptables.rules
# cat /proc/net/ip_tables_matches
udplite
udp
tcp
icmp
# iptables -nvL --line-numbers
Chain INPUT (policy ACCEPT 84 packets, 55360 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:17500 reject-with icmp-port-unreachable
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 77 packets, 11364 bytes)
num pkts bytes target prot opt in out source destination

Installing XML::Simple Perl module on 10.4.8

Two of my friends today asked me to help them get XML::Simple working on their Mac's. Somthing that should be a simple cpan one-liner "install XML::Simple" doesnt work on OSX. It took me a half hour to figure all this out... here are the steps:
Prerequisites:
- X11 1.1.3 package from the OSX install disk (or Apple download site)
- Perl 5.8.x w/cpan (default on OSX)
- a terminal
- A reasonable working knowledge of Perl and Unix
Step 1:
Open terminal, type 'cpan' to enter the cpan installer.
cpan> install XML::Simple
It will ask you three times if you want to follow the prerequired modules. Hit enter every time. Eventually you will get a dozen test failures. These are in XML::Parser, a required module.
Step 2:
cpan> exit
$ cd ~/.cpan/build/XML-Parser-2.34 **Note the version may change
$ perl Makefile.PL EXPATLIBPATH=/usr/X11R6/lib EXPATINCPATH=/usr/X11R6/include
$ make test
$ make install
Step 3:
Back to cpan...
$ cpan
cpan> install XML::Parser
Already Installed
cpan> install XML::Parser::Expat
Already Installed
cpan> install XML::SAX::Expat
Installs with some silly warning about ParserDetails.ini. Lets fix that.
cpan> exit
Step 4:
Here is the command/code to add Expat to the ParserDetails.ini file. If we don't, we can't proceed past this point.
$ sudo perl -MXML::SAX -e "XML::SAX->addparser(q(XML::SAX::Expat))->saveparsers()"
Step 5:
Back to cpan to finish the install
$ cpan
cpan> install XML::Simple
Hit enter if it asks you anyting. The whole thing should work.
cpan> exit
Step 6:
Verify XML::Simple existance with:
$ perl -MXML::Simple -e '1;'
If you don't get an error, you're all done!
Enjoy.
Macbook Pro 15" C2D Mac OS X (10.4.8)

Two of my friends today asked me to help them get XML::Simple working on their Mac's. Somthing that should be a simple cpan one-liner "install XML::Simple" doesnt work on OSX. It took me a half hour to figure all this out... here are the steps:
Prerequisites:
- X11 1.1.3 package from the OSX install disk (or Apple download site)
- Perl 5.8.x w/cpan (default on OSX)
- a terminal
- A reasonable working knowledge of Perl and Unix
Step 1:
Open terminal, type 'cpan' to enter the cpan installer.
cpan> install XML::Simple
It will ask you three times if you want to follow the prerequired modules. Hit enter every time. Eventually you will get a dozen test failures. These are in XML::Parser, a required module.
Step 2:
cpan> exit
$ cd ~/.cpan/build/XML-Parser-2.34 **Note the version may change
$ perl Makefile.PL EXPATLIBPATH=/usr/X11R6/lib EXPATINCPATH=/usr/X11R6/include
$ make test
$ make install
Step 3:
Back to cpan...
$ cpan
cpan> install XML::Parser
Already Installed
cpan> install XML::Parser::Expat
Already Installed
cpan> install XML::SAX::Expat
Installs with some silly warning about ParserDetails.ini. Lets fix that.
cpan> exit
Step 4:
Here is the command/code to add Expat to the ParserDetails.ini file. If we don't, we can't proceed past this point.
$ sudo perl -MXML::SAX -e "XML::SAX->addparser(q(XML::SAX::Expat))->saveparsers()"
Step 5:
Back to cpan to finish the install
$ cpan
cpan> install XML::Simple
Hit enter if it asks you anyting. The whole thing should work.
cpan> exit
Step 6:
Verify XML::Simple existance with:
$ perl -MXML::Simple -e '1;'
If you don't get an error, you're all done!
Enjoy.
Macbook Pro 15" C2D Mac OS X (10.4.8)

Custom login module

hi,
I'm would like to configure a custom authentication module between OIM, JBOSS and AD.
I try to use the LdapLoginModule from JBOSS.
Add in xlconfig.xml :
<login-module>
<thirdPartyLoginModule>org.jboss.security.auth.spi.LdapLoginModule</thirdPartyLoginModule>
</login-module>
Change in login-config.xml :
<application-policy name = "xellerate">
     <authentication>
          <login-module code="org.jboss.security.auth.spi.LdapLoginModule" flag="required">
               <module-option name="java.naming.factory.initial">com.sun.jndi.ldap.LdapCtxFactory</module-option>
               <module-option name="java.naming.provider.url">ldap://XXXX:389</module-option>
               <module-option name="principalDNPrefix">XXXX</module-option>
               <module-option name="principalDNSuffix">XXXX</module-option>
               <module-option name="java.naming.security.principal">XXXX</module-option>
               <module-option name="java.naming.security.credentials">XXXX</module-option>
               <module-option name="rolesCtxDN">XXXX</module-option>
               <module-option name="uidAttributeID">XXXX</module-option>
          <module-option name="matchOnUserDN">XXXX</module-option>
          <module-option name="roleAttributeID">XXXX</module-option>
          <module-option name="roleAttributeIsDN">XXXX</module-option>
          <module-option name="searchTimeLimit">XXXX</module-option>
          <module-option name="searchScope">XXXX</module-option>
          <module-option name="allowEmptyPasswords">XXXX</module-option>
          </login-module>
     </authentication>
</application-policy>
There is an Error when I try to login on OIM.
Server.log :
TRACE [org.jboss.security.auth.login.XMLLoginConfigImpl] Begin getAppConfigurationEntry(xellerate), size=9
TRACE [org.jboss.security.auth.login.XMLLoginConfigImpl] End getAppConfigurationEntry(xellerate), authInfo=AppConfigurationEntry[]:
[0]
LoginModule Class: org.jboss.security.auth.spi.LdapLoginModule
ControlFlag: Anmeldemodul-Steuerflag: required
Options:name=uidAttributeID, value=member
name=matchOnUserDN, value=true
name=rolesCtxDN, value=XXXXX
name=principalDNPrefix, value=XXXXX
name=principalDNSuffix, value=XXXXX
name=java.naming.factory.initial, value=com.sun.jndi.ldap.LdapCtxFactory
name=java.naming.security.credentials, value=XXXXX
name=allowEmptyPasswords, value=false
name=java.naming.provider.url, value=XXXXX
name=java.naming.security.principal, value=XXXXX
name=searchTimeLimit, value=5000
name=roleAttributeIsDN, value=false
name=searchScope, value=ONELEVEL_SCOPE
name=roleAttributeID, value=XXXXX
TRACE [org.jboss.security.auth.spi.LdapLoginModule] initialize, instance=@6460623
TRACE [org.jboss.security.auth.spi.LdapLoginModule] Security domain: xellerate
TRACE [org.jboss.security.auth.spi.LdapLoginModule] login
TRACE [org.jboss.security.auth.spi.LdapLoginModule] Logging into LDAP server, env={java.naming.factory.initial=XXXXXX...}
TRACE [org.jboss.security.auth.spi.LdapLoginModule] Logged into LDAP server, javax.naming.ldap.InitialLdapContext@f24d4f
TRACE [org.jboss.security.auth.spi.LdapLoginModule] Rebind SECURITY_PRINCIPAL to: cn=XXXXX
TRACE [org.jboss.security.auth.spi.LdapLoginModule] searching rolesCtxDN=XXXXX
TRACE [org.jboss.security.auth.spi.LdapLoginModule] Checking answer: XXXXX
TRACE [org.jboss.security.auth.spi.LdapLoginModule] Assign user to role XXXXX
TRACE [org.jboss.security.auth.spi.LdapLoginModule] User 'XXXXX' authenticated, loginOk=true
TRACE [org.jboss.security.auth.spi.LdapLoginModule] commit, loginOk=true
TRACE [org.jboss.security.SecurityAssociation] getPrincipal, principal=null
TRACE [org.jboss.security.SecurityAssociation] getSubject, sc=null
TRACE [org.jboss.security.SecurityAssociation] getPrincipal, principal=null
TRACE [org.jboss.security.plugins.JaasSecurityManager.xellerate] Begin isValid, principal:null, cache info: null
TRACE [org.jboss.security.plugins.JaasSecurityManager.xellerate] defaultLogin, principal=null
TRACE [org.jboss.security.auth.login.XMLLoginConfigImpl] Begin getAppConfigurationEntry(xellerate), size=9
TRACE [org.jboss.security.auth.login.XMLLoginConfigImpl] End getAppConfigurationEntry(xellerate), authInfo=AppConfigurationEntry[]:
[0]
LoginModule Class: org.jboss.security.auth.spi.LdapLoginModule
ControlFlag: Anmeldemodul-Steuerflag: required
Options:name=uidAttributeID, value=member
name=matchOnUserDN, value=true
name=rolesCtxDN, value=XXXXX
name=principalDNPrefix, value=XXXXX
name=principalDNSuffix, value=XXXXX
name=java.naming.factory.initial, value=XXXXX
name=java.naming.security.credentials, value=XXXXX
name=allowEmptyPasswords, value=false
name=java.naming.provider.url, value=XXXXX
name=java.naming.security.principal, value=XXXXX
name=searchTimeLimit, value=5000
name=roleAttributeIsDN, value=false
name=searchScope, value=ONELEVEL_SCOPE
name=roleAttributeID, value=XXXXX
2009-09-18 14:44:49,576 TRACE [org.jboss.security.auth.spi.LdapLoginModule] initialize, instance=@22168243
2009-09-18 14:44:49,576 TRACE [org.jboss.security.auth.spi.LdapLoginModule] Security domain: xellerate
2009-09-18 14:44:49,576 TRACE [org.jboss.security.auth.spi.LdapLoginModule] login
2009-09-18 14:44:49,576 TRACE [org.jboss.security.auth.spi.LdapLoginModule] Authenticating as unauthenticatedIdentity=null
2009-09-18 14:44:49,576 DEBUG [org.jboss.security.auth.spi.LdapLoginModule] Bad password for username=null
2009-09-18 14:44:49,576 TRACE [org.jboss.security.auth.spi.LdapLoginModule] abort
2009-09-18 14:44:49,576 TRACE [org.jboss.security.plugins.JaasSecurityManager.xellerate] Login failure
javax.security.auth.login.FailedLoginException: Password Incorrect/Password Required
     at org.jboss.security.auth.spi.UsernamePasswordLoginModule.login(UsernamePasswordLoginModule.java:213)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
In login-config.xml, I comment the following code :

I think that my user is authenticated from AD, but OIM try a second authentication with a username = null.
Any clues will be helpful.
Can you help me ?

Hi,
I solve the problem.
In xlconfig.xml :
<login-module>
          <thirdPartyLoginModule>org.jboss.security.auth.spi.LdapLoginModule</thirdPartyLoginModule>
</login-module>
In login-config.xml
<application-policy name = "xellerate">
<authentication>
<login-module code="org.jboss.security.ClientLoginModule" flag="required">
</login-module>
<login-module code="com.thortech.xl.security.jboss.UsernamePasswordLoginModule" flag = "required" >
          <module-option name = "unauthenticatedIdentity">Unknown</module-option>
<module-option name="java.naming.factory.initial ... </module-option>
</login-module>
</authentication>
</application-policy>
A user must have a role "User" in AD.
That's all.
Thanks.

FATAL: module iwl4965 not found[SOLVED]

When booting from the CD to install Arch it detected and "installed" my intel 4965 wireless NIC just fine. However, now that I have arch installed it is giving me the error above. How can I go about grabbing the module off of the install disc and getting it running on my machine? Thanks for your time in advance.
Last edited by isolier (2008-01-10 09:58:01)

Ok here is my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="me"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo !eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
NET_PROFILES=(wifiProfile)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond alsa)
# End of file
Then the file "wifiProfile" residing in /etc/network-profiles is:
# Network Profile
DESCRIPTION="Home Wireless Network"
# Network Settings
INTERFACE=wlan0
HOSTNAME=me
# Interface Settings (use IFOPTS="dhcp" for DHCP)
IFOPTS="dhcp"
#GATEWAY=192.168.0.1
# DNS Settings (optional)
#DOMAIN=localdomain
#DNS1=192.168.0.1
#DNS2=
# Wireless Settings (optional)
ESSID=myWifi
#KEY=
#IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
AUTOWPA="yes" # automatically configure WPA
PASSKEY="secretPassword" # wpa passkey/phrase. for use with AUTOWPA
So there you have it, hope it helps.

FM/RFC to assign specialisation of module group to a student

Hi,
I am trying with FM:HRIQ_SPECIALIZATION_INSERT_RFC to assign specialisation of module group to a student, when i pass Student Id, Object ID of Study Object (CS),Program ID,Module groupId, Module Group Category, am getting error "Combination of academic specializations is not allowed".
what could be the issue? pls suggest.
Thanks & Regards
Khaleed

Dear Khaleed,
Please (check) make sure you conducted all of customizing steps in relation to the SC, CG and allowed combinations of specialisations in the progam catalog
Before you can offer specializations, you must perform the following preparatory steps:
1. Set up module group variant/category combinations (both in IMG steps and PIQ_ACSTRUC)
2. Define the relevant module group categories as a u201Cspecializationu201D (by setting the flag in the customizing table).
3. Assign a module group variant to the program of study (Program data tab page of the object SC).
4. Link module groups to the program of study which reflects the required module group categories.
When you have performed the above steps, you can maintain the allowed combinations of module groups in the SLCM Menu -> `Environment` u2192 Maintain acad. specializations in the `program catalog` (=PIQ_ACSTRUC)
This function allows you to define the rules for valid and invalid specialization combinations for each of your programs of study. For example, you may have a B.A. program that requires students to select a major and a minor: With this function, you can explicitly define the major/minor combinations that are not permitted (e.g. Math Major and Math Minor).
Note: You do not have to explicitly define all allowed combinations.
br
Rob

HR modules for ESS

Hi,
I am looking for information regarding HR modules required for ESS Applications. For example, for Who's Who application HR module PA & OM will be needed. Similarly, what are the required modules for other applications? Is there any document/note containing this information?
Regards,
Apurva

hello Apurva
You can find technical information of ESS/MSS applications in help.sap.com accrdoing to your service pack levels.
Serach the same
For example
ESS in Personnel Administration http://help.sap.com/saphelp_46c/helpdata/en/f0/128fac4eb311d189530000e829fbbd/frameset.htm
MSS iViews : http://help.sap.com/Business_Packages/EN/d8/773afa9edda64aba94570a4323266d/frameset.htm
Best Regards
Sridhar S

Help needed with perl Image::Magick module

I don't know if this is the right place to post this (it might belong in the Newbie corner instead), but I'll give it a try.
I need an Image::Magick Perl module (and a load of other modules, which I have found) for a program I desperately need. Now, the only thing I know about Perl is that v. 6 is supposed to be coming out soon - apart from that, I'm blank. The installation is giving me some problems.
The installation guide is somewhat ambiguous. It says:
Next, edit Makefile.PL and change LIBS and INC to include the appropriate path information to the required libMagick library. You will also need paths to JPEG, PNG, TIFF, etc. delegates if they were included with your installed version of ImageMagick.
In the Makefile.PL which comes with the package, these two are defined:
'INC' => '-I../ -I.. -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/X11R6/include/X11 -I/usr/include/libxml2',
'LIBS' => ['-L/usr/lib -lMagick -L/usr/X11R6/lib64 -L/usr/lib -ltiff -ljpeg -lpng -ldpstk -ldps -lXext -lXt -lSM -lICE -lX11 -lbz2 -lxml2 -lpthread -lm -lpthread'],
I haven't changed anything in them, because I haven't got the slightest idea what to change and to what. When I run the installation procedure ('perl Makefile.PL', 'make', and 'make test'), I get an error message during the test (but not before that). Here's the entire output from 'make test':
/bin/sh ../magick.sh PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/bzlib/*.t t/jng/*.t t/jpeg/*.t t/mpeg/*.t t/png/*.t t/ps/*.t t/tiff/*.t t/x/*.t t/xfig/*.t
/bin/sh: ../magick.sh: No such file or directory
make: *** [test_dynamic] Error 127
There is mention somewhere that one might compile the module together with ImageMagick or with Perl, but I don't think I'm ready for that...
Is there anyone skilled in Perl who can tell me what it is that I'm doing wrong, alternatively make a package file...?

I've found two other packages that I needed in AUR, but when I run the make test for the program that I need (fontlinge), it still complains that it can't find the Image::Magick module. I already have the imagemagick package installed, though, that's why I thought I'd have to install and compile the perl module separately.
Here's the output from the 'make test' for fontlinge:
make -C modules
make[1]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
make[2]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
make[2]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
make[1]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
./misc/check_for_modules.pl --skip-fontlinge-module
Ok. Cwd 'abs_path'
Ok. DBI
Ok. User::pwent
Missing Image::Magick
Ok. Getopt::Long
Ok. DBD::mysql
Ok. File::Find
Ok. File::Path
Ok. ExtUtils::MakeMaker
Ok. 5.006
Ok. bytes
Ok. -utf8
It seems some required modules are missing.
How to get missing modules differs from _which_ module you are missing.
You can get modules like DBI from your distributions CD
or search the web for a RPM/DEB/...-file. www.cpan.org is always a good adress.
It may be a good idea to configure your perl-CPAN-Module as ROOT(!!!) by typing
perl -MCPAN -eshell
It is VERY important that you do not just 'su' to root but 'su -' on SuSE linux.
Once you have configured perl, you can install CPAN-modules by
perl -MCPAN -e 'install MODULENAME'
Other modules like Image::Magick require you to have the programs installed
they belong to.
If you are missing a 'fontlinge'-module, you have not installed this
program correctly. :-)
If the missing module begins with a '-' sign this module might miss,
because it is not possible to DEACTIVATE it, i.e. unwanted utf8 encoding.
make: *** [test] Error 255
If this makes sense to anyone, I'd be very happy. (For the record: Fontlinge is - or at least seems to be - the only decent font manager I've found for Linux. This seems to be a gaping, wide open black hole in the Linux world... There's gfontview, opcion, fontpage, and a couple of other minor apps that I've found, but none of them are functional for anything but the most basic operations, and on the whole, there doesn't seem to be much between the KDE font manager - which really makes one wonder how far the KDE people want to go in their emulation of windows... - and the font editor FontForge, which is great as a font editor, but overkill as a viewer, and hardly a manager.)

Module Pool SAPZPS01

Hi Experts,
I've a module pool program 'SAPZPS01' in SAP 4.7. It's naming convention seems to be different from the common naming convention used.
I want to create this program in ECC 6.0 but it's asking for Object access key...
Any help is appreciated...
Thanks and Regards,
Rudresh

Hi,
naming convention for module pool is as follows:
SAP R/3 Requirements:
Module Pool Screen names must begin with SAPMY or SAPMZ and can be a maximum of 8 characters long.
Standard Format:
Screen module pool names should begin with SAPMZ followed by a 1 character functional descriptor. The last 3 digits of the name should be a unique alphanumeric identifier.
Regards ,
Sooness

Kernel26-lts hangs at booting modules

I have kernel26 and kernel26-lts installed.
Kernel26 works good, but I think I also have this I/O issue:
#uptime
[...] load average: 1.29, 1.29, 1.15
To further test it I wanted to boot up kernel26-lts. But while loading the modules during bootup it just hangs. Hard reboot...
Tried it with kernel26-lts from extra and testing, makes no difference. Also started with nomodeset acpi=off noapic boot options (and all combinations of it).
When I started kernel26-lts in verbose mode, I saw a lot of data just fly by without being able to read it. This line repaeted itself a lot though:
wifi0: Interrupt, but dev not configured
So, can you give me any tips on what to do to get my kernel26-lts working? Or getting any helpful info for a bug report?

Thanks for your reply!
I'm unfortunately not able to read any text from the kernel.log from the lts starting. There's nothing written to the kernel.log...
As kernel26-2.6.35.x is the first version with KMS working for my ATI card, I also tried disabling it by removing radeon from modules array in rc.conf. That didn't work either...
More info on my system:
$ lspci
00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
00:09.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Zurich"
KEYMAP="de-latin1"
CONSOLEFONT=default8x16
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(natsemi slhc !orinoco !orinoco_pci !usblp ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-ali5451 soundcore acpi_cpufreq cpufreq_ondemand cpufreq_conservative evdev tun agpgart intel_agp radeon)
# natsemi slhc hermes !hostap !hostap_pci orinoco orinoco_pci ac97_bus... radeon
#VOR evdev: acpi_cpufreq cpufreq_ondemand cpufreq_conservative?
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="firefly"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
#lo="lo 127.0.0.1" ##was on
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp" ##was on
#INTERFACES=(lo !eth0) ##was on
WIRELESS_INTERFACE="wlan0"
WIRED_INTERFACE="eth0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#gateway="default gw 192.168.0.1" ##was on
#ROUTES=(!gateway) ##was on
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
#NET_PROFILES=(heim)
NETWORKS=(o3 heim2)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng @acpid @net-auto-wired !netfs @crond @ntpd @laptop-mode @alsa rpcbind hal @cups kdm)

ServerLockManager required modules?

Similar Messages

Maybe you are looking for