Service entry sheet:Pricing condition not showing

Hello Experts,
Greetings.
My issue is while printing the SAA (Service entry sheet) it does not show other values (i.e VAT AMOUNT,ADDITIONAL COST) which we have entred during time of purchase order creation.It shows only basic-gross price only.
Can anybody please advice what could be the problem.We want every condition to shown in SAA print out.
Any help would be highly appriciated.
Best Rgds
Nitin

Thanks for your reply.I have ticked against the country code by going through transection OLMSRV.But what happenes is that while making any new SPO(Service Purchase Order) it does not catch the vat element.
Actually what the problem is that while making any service entry sheet sometimes we do require to add vat for some specified services and we need to add some additional cost too.Now while making the saa it does not show either vat or additional cost on SAA.
As a result while parking invoice through MIR7,the additional cost which we have entered in PO does not reflect in invoice resulting less payment to vendor.
Please suggest how to overcome with this issue.
Thanks & Best Rgds
Nitin

Similar Messages

  • Deleted service entry sheet from SRM not posted in ECC

    Experts,
    SRM 5.0 (Ext classic)
    We have a limit PO for 1000GBP. User created a service entry sheet for 880GBP and this was posted in ECC. Then user deleted this entry sheet after which I see 'Error in process' status. RZ20 status shows "Error whilst creating an entry sheet in the backend system. Entry sheet XXX already deleted". Also Service entry sheet in ECC has status 'deleted'.
    How come SES in ECC has status deleted but in SRM it shows error in process?
    Thanks in advance

    Hi Christian,
    Thanks for your reply.
    But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
    Also I have checked the time at which the cancellation was created and everything is in sync.
    How can i change the status of SES from 'Error in process' to 'posted in backend'?
    Please advise
    Thanks

  • How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

    Dear Experts:
    could you please share with me the knowledge for below topic:
    How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
    how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
    Is this SAP standard function OR there need an enhancement to do that?
    I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
    Best regards,
    Andy

    Hi, Gopi,
    Glad to see your feedback, but i still have question on your feedback:
    which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
    And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
    Below is the example and another question:
    what the relationship between the pricing procedures at service PO item level and service line item level?
    1. The freight cost in shipment cost document—including used condition type and pricing procedure
    The pricing procedure of shipment cost document
    2. The freight cost in service entry sheet—including used condition type and pricing procedure
    The pricing procedure of service entry sheet--the pricing procedure at service line item level
    3. The freight cost in service PO item—including used condition type and pricing procedure:

  • Service PO price and price in service entry sheet

    Hi
    I have created a service PO with following pricing:
    Griss price = 100
    Discount= 20
    Net price= 80
    When I am creating the service entry sheet, the system is showing price as 100 .
    Why system is not showing the price as 80(net price)
    Regards
    Sara

    Hii,
    In the ML81n, while creating the Entry Sheet in the Value Tab the Nte Price will 80.00 Rs but the total value will be Rs100.00.
    Regards,
    Kumar

  • Multiple Line Items in One Service Entry Sheet

    Dear All,
    Can we capture multiple line Items of same PO in one Service Entry Sheet
    If yes,Please can you give some steps to do the same.
    Regards
    Murali raju

    Hello,
    We need to create a service entry sheet seperately for every line items of the PO.But you can create Service entry sheets for multiple lines with in that Line item.
    Ex. if u have 2 line item in the PO,
    Every line item of the PO will have Multiple services in the Item details..So these Multiple service number Entries shall be treated in the same Service Entry sheet. But not the 2 nd Line itme ot the Purchase order as it will have another set of Service entries.
    Please cme back if u hv queries..
    Mug

  • Reverding of the service entry sheet

    hi there
    I have one issue regarding the service entry sheet
    the user have created the service po & entry sheet in year 2006
    now he want to cancel the service entry sheet
    but when i m trying to cancel the service entry sheet
    the system is showing me 3 options
    1) error log
    2) save w/o acceptance
    3) exit without saving
    Kindly advice
    This is little urgent

    Hi
    Check what is the error and try to correct it.
    Second option will be just saving the changes so checking the error log will help.
    Kiran

  • MIRO invoice verification for Service entry sheet

    When trying to do invoice verification for Service entry sheet i am getting this below error pls guide me
    Delivery note/service entry sheet 5000000150  does not exist
    Message no. M8183

    Hi,
    You may be saves SES number and now SES is not released!
    1st Just cross check PO history TAB of service PO(ME23N), did you have only service entry sheet number or you have service entry sheet number and material document( will be created after releasing SES) with 101 movement type.
    You have created service entry sheet (SES) in ML81N and got SES number, so as to recognize the vendor performed service. Next step, you need to accept service by releasing SES( in ML81N by clicking green flag or if release strategy there for SES, you need to release SES in ML85) so that  FI document will be created.
    Once SES released, then you can do MIRO w.r.t SES only.
    Check doc:
    http://help.sap.com/bp_bl604/BBLibrary/Documentation/209_BPP_EN_FI.doc
    Regards,
    Biju K

  • Service entry sheet print(ml83)

    Dear Sir(s),
    While creating the PO, we mention the message out put type/printer, so with ref. to that we take the PO Printout
    But while creating the Service Entry sheet we are not mentioning the output type/printer.
    Does it to be attached any where may be by IT/BASIS?
    I tried with ml83 and putting the service entry number, but its giving a message-no suitable purchasing document found.
    Even I checked the authorization object after getting this message but there was no any object too
    can any body help me.
    i am getting the same problem whil taking the RFQ print outs, please help

    Hi,
    You need to set up a print output record in MN13 first. This will create the link to the printer and set the timing (immediate or via batch job etc.)
    So set up this output record with MN13 (remember to go to the communications screen as well, to specify the printer id)
    Steve B

  • Pricing of Service Entry Sheet is not coming in editable mode in ML81N

    Dear Friend,
    I am trying to create a Service Entry Sheet in ML81N where selecting the red button for Condition where itu2019s all coming in display mode where as I have maintained some Z Condition to put the value or % wise.
    Client requirement is put some % or value, if they want to deduct from the price from Gross Price. Though I can see that all the condition is flowing but in display mode, but there I want to select the Condition type and put it % or value.
    *I have checked in configuration in SPRO>External Service Management>Pricing Condition and seen there standard procedure is there MS0000 where I have maintained one new ZCON, but I am not able to put the value while doing service entry sheet as displaying mode only in ML81N. *

    Hi,
    the price chang emust be allowed in the corresponding PO service item on services detail, in field Price Change in Entry Sheet in case of planned services. When you create your SES against a PO with contract limits, then please set the same indicator in the contract service item.
    Regards,
    Edit

  • Service entry Sheet does not pick any Condition charges From Service PO

    Hi All
    Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

    HI,
    Please check Sap note 381030
    Along with other thing It says
    "Delivery costs are generally not supported in external services management and in case
    of blanket purchase orders, item category D or B. Instead of representing delivery
    costs via conditions, in case of service documents, freight costs and other, SAP
    recommends to add in additional service lines."
    So that is the reason you are not getting those account entry in the time of service entry sheet
    Use another service line with text ( or service master) for the additional costs as suggested by SAP
    Hope it clarifies

  • Mass extention of service entry sheet condition record validity date

    Hi all,
          I have immediate requirement. i need to extend the validity date for condition record related to the Service entry sheet. This has to done mass sheet changes.
         I am looking for Any bapi or Standard function module or any config changes.
    I am looking forward for your valuable inputs.
    Regards,
    Sreenivasa Sarma K

    Arun,
    This doesn't suprise me...
    I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
    PeteA
    [www.pjas.com]

  • Book a credit note related to service entry sheet

    Hi
    There is a service entry sheet which has been invoiced and payed. The service was a business trip. The vendor discovered that a discount has not not been charged and sent a credit note to the customer. In the transacion ME2S it is seen that a credit has not occured. In the transaction ME2L, the credited amount is still there to invoice.
    How can a credit be booked related to a service entry sheet? It may also be possible to credit only a position on a service entry sheet.
    Thanks in advance
    Esra

    Hi,
    ME2S, which is PO reporting with services. There is a column in this       
    report that is supposed to show the invoiced quantities and amounts. The   
    problem is when you post a subsequent debit against an invoice, only       
    zero values appear. However, when invoices and subsequent debits are       
    cancelled and reposted the correct value are displayed                     
    In the case of 'GR-based IR' (EKPO-WEBRE) and not 'SRV-based IR' (EKPO-LEBRE)              
    there is no quantity calculation as quantity is always 1 in invoices.               
    That is why system displays zero quantity and as the consequence also               
    zero amount for invoices in ME2S.                                                   
    There was only the pilote note  550434 created to change this behaviour, it was available for release 45B only.                                                                               
    Regards,
    Edit

  • Taxes not flowing to Service entry sheet

    Hi,
    Service tax is not flowing to Service entry sheet but It is appearing in the PO. Kindly suggest how to get the same,
    Regards,
    Sathya.

    Hi
    Means what ? You want to add service tax ammunt at service consumption ammount or cleared at MIRO,
    If you use Tax code at Po for Service tax then this ammount is cleared at Invoice (MIRO) only .
    If you maintain service tax at Pricing procedure then it is added at service consumption ammount at service entry sheet.
    Regards
    sanjay L

  • Services not defaulted in Service Entry sheet.

    Dear All
    I have created service  Purchase Order but when  I am tryng to create Service Entry sheet the details about the Services are not defaulted.
    I have to key in the detaila manually like the Service Number and other info.
    Can anybody suggest why this is happening.
    Regards

    Please maintain service conditions through Txn ML33.

  • Discount Condition in Service Entry Sheet

    Dear All
    I made a service PO of amount 500 INR and entered discount condition RA01@5%, so net price comes to 475 INR.In PO taxes are getting calculated on 475 INR.
    Now when I make a Service Entry sheet (SES) of amount 100 INR then in header conditions tab I am not able to see discount condition.Also the tax is getting calculated on 100 INR instead of 95 INR (5% Discount).
    Please tell me whether I a have to manullay enter discount condition RA01 in SES everytime I make a SES or it should automatically fetch from PO and where can I see discunt condition type in SES.
    Regards
    SK

    P347206 wrote:
    Dear All
    >
    > I made a service PO of amount 500 INR and entered discount condition RA01@5%, so net price comes to 475 INR.In PO taxes are getting calculated on 475 INR.
    >
    > Now when I make a Service Entry sheet (SES) of amount 100 INR then in header conditions tab I am not able to see discount condition.Also the tax is getting calculated on 100 INR instead of 95 INR (5% Discount).
    >
    > Please tell me whether I a have to manullay enter discount condition RA01 in SES everytime I make a SES or it should automatically fetch from PO and where can I see discunt condition type in SES.
    >
    > Regards
    > SK
    hi,
    For this you have to set the discount type as item condition not header condition in m/06 you have to select the condition type .
    in position you have to give the  ra01 which is your condition type in changes which can be made tab you have to given manual entries   tab can be select as B     Automatic entry has priority
    Thanking you.

Maybe you are looking for