**** SERVICE FROM BT AGAIN !!!!!!!!!!!!!!!!!!!!!!!...

suprise suprise!! another problem cut off again for 10 days due to bt openreach digging up the road and slicing my phoneline it took 2 days off work 6 appoinments 2 failed to turn up and £40 spent on my mobile phone to get bt to sort out yet another problem the first time was when we moved in march it took 6 weeks to get a line sorted they replaced boxes, cables, pumped silt from boxes and cables dug up the road twice!! and i was ready to forget living luckily i managed to speak to josh in higher customer services in lincoln and he escalated it i did eventually get sorted but yet again bt cut me off again with not even a word i have to call them god knows how many times took 2 days off work had 6 supposed open reach engineers were supposed to turn up two failed their appointment times i am so fed up i cannot tell you how much why oh why do i have to speak to **bleep** india i am a bt customer in the uk not india i am fed up trying to explain why i am fed up and after all the hassle i've had in the last 11 days i have to call them for compenation to my phonebill and guess what they offered me £2.88 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! i fell off my chair then they Put the phone down on me three times when i blew the LAST gasket in my head!! BT, I AM FED UP READ MY ACCOUNT DETAILS YOU WILL SEE WHAT I HAVE BEEN THROUGH SINCE MARCH WHY SHOULD I AS A PAYING CUSTOMER HAVE TO PUT UP WITH **bleep** SERVICE YOU FAIL AGAIN AND AGAIN AND AGAIN ON ALL LEVELS I HAVE HAD ENOUGH I AM GOING TO THE OMUBUDSMAN AND WATCHDOG I AM PAYING YOU REMEMBER FOR A SERVICE YOU ARE NOT PROVIDING AND YOU THINK A CALL CENTRE IN INDIA AND CONTRACTERS FROM OPENREACH CAN SORT THE PROBLEMS YOUR POOR COMPANY PRODUCES YOU ARE LIVING IN INDIA THEN!!! BRING ON THE DIRECTOR OF THE COMPANY TRUST ME I AM WAITING!!! A VERY ******* OFF CUSTOMER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi ladyref1974,
Welcome to the forum, I am sorry to hear of all the problems you've had with your service.
If you can send us an email we'll be able to look into this for you. You can get our "Contact us" link by clicking on my username, it's under "About me" (top-left of my profile page).
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Was unable to load data class info from sync services. try again later.

Since installing the latest version of itunes (11.1.5.5) whenever I have either mine or my wife's iphones (4 and 5c, both with the latest 7.1.1) turned on and I start iTunes, I receive the error message saying that itunes was unable to load data class info from sync services. try again later.
If I leave the phones turned off and open iTunes, I am able to sync my old ipod so it appears to be an issue with the software on the phones?
I'm just not sure where to start. I've made sure that itunes has the latest version and no more updates are available.
Thanks in advance,
jamey8420

this is on a windows 7 machine, btw.

Problem invoking a web service from soa11g BPEL.

Hi ,
I am trying to invoke a web service from soa bpel 11g composite.
We have the wsdl, wsdl URL of the web service along with the user name , password credentials.
Initially w/o any WS policy attached and testing the composite, it fails with the below message
*<fault>*
*<bpelFault>*
*<faultType>0</faultType>*
*<remoteFault>*
*<part name="summary">*
*<summary>An Authentication object was not found in the SecurityContext</summary>*
*</part>*
*<part name="detail">*
*<detail>javax.xml.ws.soap.SOAPFaultException: An Authentication object was not found in the SecurityContext</detail>*
*</part>*
*<part name="code">*
*<code>soap:Server</code>*
*</part>*
*</remoteFault>*
*</bpelFault>*
*</fault>*
*<faultType>*
*<message>0</message>*
*</faultType>*
*</messages>*
So I have gone back to the composite and added the WS policy (oracle/wss_username_token_client_policy) by Right clicking on web service -> Configure WS Policy -> Security -> oracle/wss_username_token_client_policy -> OK.
After this I have added the following binding properties 'oracle.webservices.auth.username' , 'oracle.webservices.auth.password' with the respective values and deployed it again.
Even then I face the same issue. I have looked into the EM console and found the HTTP username and password properties were blank for this Web service even though the WS policy was attached.
Later I have tried editing the username pwd from the EM console, only to find out that the composite was now failing in the previous step (an ordinary db adapter with a select statement) even before it reaches the web service invocation.
If I redeploy the composite, the http username and pwd properties in the EM console are erased and when i test it, it errors out at the web service invocation with the same issue again.
Any pointers on how to solve this issue ??
How can I figure out what is the security policy the web service is using ??
Regards,
Shiva Kiran

Hi,
Can anyone help me with this ??
I guess I am not able to send the authorization credentials via the request to the web service invocation.
Plz help ! This is a bit urgent..
Regards,
Shiva Kiran

How to move SCCM service from one logical drive to another logical drive on site database server?

Hi All,
We are ussing SCCM 2012 RTM in our environment. We have one central site on
Server1 and one primary site on server2. SCCM database of both sites are on remote servers
we have one cluster (Name: Cluster1) in that we have four running SQL servers (ServerdDB1, ServerDB2,
ServerDB3, and ServerDB4 ). There is one sql instance named
Application on all four sql servers. Central site database
CM_CAS hosted Application instance on ServerDB3.
ServerDB2 is the failover of ServerDB3
Now I have few queries on which I need your assistance.
1. The SMS_SITE_SQL_BACKUP_SERVER1 service is running on all sql servers in the cluster. The SMS_SITE_SQL_BACKUP_SERVER1 service on ServerDB4 is running on L drive. I want to move this service from L drive to system drive C permanently.
How can I do this?
2. I tried to move SMS_site_sql_Backup_server1 service from L drive to C drive by following changes
Change the service path in registry on ServerDB4
Reset the SCCM central site without any modification.
The above service moved to C drive time beaing but I do'nt know why this service came again in L drive. and running from L drive on same server. Do I need to unistall SCCM and reinstall again?
3. Why did SCCM site database install on all sql servers ? As I ServerDB2 is the failover of ServerDB3 so it should be only ServerDB2 and ServerDB3.
4. Why SMS_SITE_SQL_BACKUP_SERVER1 service is running on all SQL server in cluster?
Your assistance on above qureies will be very appreciated..
Thanks
Rinku

Hi,
The server will be installed on the each of the clustered nodes. I think you may use the following to do the change.
1. Stop the SMS_Site_SQLBackup_%SERVERNAME% on the node
2. Remove the following Registry Keys on the node:
HKEY_LOCAL_MACHINE\Software\Microsoft\SMS\Components
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SMS_SITE_SQLBACKUP_%SERVERNAME%
3. On the site server, browse to the fllowing registry key:
HKLM\Software\Microsoft\SMS\Components\SMS_SITE_Component_Manager\Multisite Component Servers\%SERVERNAME%
4. Change the install directory to the appropriate drive
5. Restart the SiteComp service on the Site server
Note: Please do a backup before doing this change, which is very important for unexpected failure.
Juke Chou
TechNet Community Support

I have an iPhone 5 16gb white color and i did not get any of the services from apple pls help[ me out

I have one iphone 5 16 gb white colour with me and its in still under warranty and my phone was fallen down by chance and it got turned off totally and not even switched on also then i went to apple authorised service center for regarding the same . then service center people said that sir you need to submit your phone , after that i left my phone to service center and after two days i have got one call from service center that sir your phone is under phisical damaged condition so u will not be abel to get warranty from apple this will cover under paid replacement and you need to talk to apple customer care also regarding this .same .
Then i called up to apple customer care and they said sir we have got some images from the service center regarding your phone and we found that your logic board is damaged from inside and you would not be abel to get the paid replacement also you need to buy a new phone on stock price i was shocked on that time why would i pay 40 to 50 thouasnd again on iphone if its not that much stronger to take bit of imapcts like this
I had talked numbers of time to service center also but they all are denied against the complainst
if any body is there how can help me out regarding this so pls register my complaint and help me out from this highly dissatisfied service from apple .
Thnaks
karan

Warranties do not cover damage

How to call a web Service from Oracle Applications?

Hi friends,
I've posted this question on OA Framework forum , but may be it's more appropiated put it here. Sorry for do it again:
It's about how to call a web service from a Form or a .sql (via Request) in Oracle Applications:
Could you please explain here the detailed steps (with code example if it's possible) to invoke a webservice from Oracle Applications?.. how did yo do it...?
I've read differents posts here and the 33097.1 metalink note (by the way, the first recommended link in this note is broken...), but there are lots of theorical concepts and no real examples to see how/from where invoke the WS
I'll have to call one webservice (I suppose the customer will give me the interface implementation)...but I've never did it with Applications so that's why I ask you for all the detailed steps...
I work with Forms 6i, Apps 11.5.10.2 and DB 9.2.0.7.
Thanks a lot.
Jose.

Hello Jose,
I did using java program to call BPEL web services in 11.5.10.
I pasted below the metalink note for your reference (Note:250964.1)
The idea is first write a java program to call the webservice (in my case it is calling an BPEL web service, so this may not help directly), test it.
Then port the java program as specified in the note, so that you could call your web service through concurrent manager scheduler.
Is this ok?
Thanks
Arun.
======================================================
Checked for relevance on 25-Apr-2007
Application Install - Version: 11.5.8 to 11.5.10
Goal
====
How to register and create a Java concurrent program for Oracle Applications
Release 11i
Solution
========
1. Create your Java Concurrent Program (JCP) , using a text editor.
/*===========================================================================+
| Concurrent Processing Sample Code |
| |
| FILENAME |
| Hello.java |
| |
| DESCRIPTION |
| Sample Java concurrent program |
| About the simplest possible program, just writes a message to the |
| logfile and output file. |
| |
| HISTORY |
| $Log$ |
| |
+===========================================================================*/
package oracle.apps.fnd.cp.sample;
import oracle.apps.fnd.cp.request.*;
public class Hello implements JavaConcurrentProgram {
public static final String RCS_ID = "$Header$";
public void runProgram(CpContext ctx) {
ctx.getLogFile().writeln("-- Hello World! --", 0);
ctx.getOutFile().writeln("-- Hello World! --");
ctx.getReqCompletion().setCompletion(ReqCompletion.NORMAL, "");
=======================================
End Sample
=======================================
2. Create a sample directory under $JAVA_TOP:
$ mkdir $JAVA_TOPoracle/apps/fnd/cp/sample
3. Copy Hello.java into $JAVA_TOP/oracle/apps/fnd/cp/sample:
$ cp $HOME/Hello.java $JAVA_TOP/oracle/apps/fnd/cp/sample
4. Compile your java program:
javac $JAVA_TOP/oracle/apps/fnd/cp/sample/Hello.java
5. Test at the command line with following syntax:
jre -Ddbcfile=$FND_TOP/secure/your_dbc_file.dbc \
-Drequest.outfile=./outfile \
oracle.apps.fnd.cp.request.Run \
oracle.apps.fnd.cp.sample.Hello
6. Register your custom java concurrent program with Oracle Applications.
a. Navigate: Concurrent > Program > Executable
b. Enter details into the form
Executable: JCPHELLO
Shortname: JCPHELLO
Application: Application Object Library
Execution Method: Java Concurrent Program
Execution File Name: Hello (Insert a name that does not contain space or period)
Execution File Path: oracle.apps.fnd.cp.sample
c. Save the details
d. Navigate: Concurrent > Program > Define
e. Enter details into the form
Program Name: JCPHELLO
Program Shortname: JCPHELLO
Application: Application Object Library
Executable: Choose JCPHELLO from LOV
Executable Options :
f. Save the details
7. Add this new concurrent request to your responsibility request group.
a. Navigate > Security > Responsiblity > Request
b. Query System Administrator
c. Add new row and choose TestJava
d. Save the changes.
8. Run your new Hello Java Concurrent Program
Navigate: Request > Run
References
~~~~~~~~~~~
Oracle Applications Developers Manual for Release 11i A75545-01
====================================================

Error calling web service from Viusal Composer

Hello:
I'm accessing entity services methods published as web services from a composite application from Visual Composer. I'm using version 7.0 SR3 SP15.
Iu2019m able to access create and read methods from entities services. But from same getAll() methods Iu2019m getting access error. When I execute the same getAll() method from u201CWeb Service Navigatoru201D it works ok. But from Visual Composer itu2019s not working. That happens only for same entities for others itu2019s working ok.
From VC Iu2019m able to select the WDSL and use I in the iViews. The other methods of the iView works ok except for the getAll.
I have already set the options of VC to not keep a cache of web services definition and review and recreate the system in portal landsacape and teh related alias to access the web services. I have laso checked te user and password in the mapping.
Thabk you in advance for your help.
Regards.

Hello:
Using the infprmation in the link that you pass me I was able to look into the log files and see what the problem is.
The getAll service as it is geerated by NWDS receive an input paramter:
queryFilter (test.types.p1.GetAllQueryFilter)
In VC when I drop the getAll method from the corresponding service data into the working area. That input parameters doesn't apper aonly the output parameter.
Then when I execute or test that service. The portal is giving an error:
Full Message Text
com.sap.engine.services.webservices.additions.soaphttp.exceptions.ProcessException: Cannot find the required parameter [queryFilter] in request message
But that parameters was never recognized by VC.
Thank you in advance for your help again.

FYI: TrendMicro antivirus prevents Transport Service from starting after installing Echange Server 2013 Service Pack 1

I installed Exchange Server 2013 SP1 in my test environment. After that mail flow between internal and external mail servers completely stopped. In the end I discovered that Transport Service on both of the mailbox servers refused to start (or, to be more
exact, stopped shortly after starting).
The following events appeared in the System event log:
Event ID 1052 (error)
Source: MSExchange Extensibility
Message: Failed to create agent factory for the agent 'ScanMail SMTP Receive Agent' with error 'Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll'
due to error 'type not found'.'. Please verify the corresponding transport agent assembly and dependencies with correct version are installed.
Event ID 16023 (error)
Source: MSExchangeTransport
Message: Microsoft Exchange couldn't start transport agents. The Microsoft Exchange Transport service will be stopped. Exception details: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'. : Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'.
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
Event ID 701 (informational)
Source: MSExchangeTransport
Message: The service will be stopped. Reason: Microsoft.Exchange.Transport.TransportComponentLoadFailedException: Loading of component 'SmtpReceiveAgents' failed. ---> Microsoft.Exchange.Transport.TransportComponentLoadFailedException: The agent component
failed to load. ---> Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to
error 'type not found'.
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
   at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.RunADOperation(ADOperation adOperation, Int32 retryCount)
   at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.TryRunADOperation(ADOperation adOperation, Int32 retryCount)
   at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
   at Microsoft.Exchange.Transport.Components.Activate()
The reason for that behavior was TrendMicro ScanMail for Exchange 11. Seems that it was unable to work with the new SP properly and prevented the entire Transport Service from starting. Uninstallation of the antivirus eliminated the issue.

Actually, you can just disable the agents until TrendMicro releases a patch and then enable them again:
http://community.trendmicro.com/...
BTW, a similar problem (high CPU utilization and services not starting) is hitting the AVG package:
http://forums.avg.com/..
Step by Step Screencasts and Video Tutorials

Shocking, service from BT - Trying to upgrade to f...

Probably the worst service I have ever received, and half wish I hadn't got involved with BT; again!
So 5 months ago, we moved house and started a broadband contract with BT for ADSL broadband. We had problems. I waited in from 1-6pm for an engineer to turn up. No show. Not surprised. Had to then spend ages on the phone to get another appointment booked. I can't fully remember how long this took but it wasn't quick. Anyway, long story short, we got it sorted eventually and have been impressed with the actual broadband service. It has been very reliable and consistent.
Oh no, I forget, we did have a problem with a big drop in speed, this resulted in a lot of phone calls, and was not easy to get sorted, but we did in the end. So… 8/10 for service so far.
It starts here; worst mistake, we decide to upgrade to infinity (which we have to have) to received BT sport through their TV package, incl. ESPN, HD, Eurosport and some documentary channels. Basically all the channels I used to watch on sky before we cancelled their service. Sounded good.
17th Sept 2013 1-6pm - Engineer appointment.
Guess what? Yep you guessed it… No show. (Just Google BT engineer didn't turn up; a healthy number of hits)! Not surprised, at 5.45PM I called BT to check if the appointment was still booked.
I was assured, a number of times, that they will be with me by 6PM. 15m left, I didn't think so!
I was right, no one turned up; again!
Then it starts… Call after call after call to BT. No one knows what is happening. Admittedly, my partner has been doing the majority of the ringing. We get promised that BT will call back on a certain date. That day comes and we hear nothing. So we call; again! This person then may try and help, but leads us up the garden path and round the block. We are going in circles. They tell us there has been a problem with the exchange. We speak to another person. They say there is no record of this on 'the system'. They tell us someone will call ANOTHER day. No one calls. Honestly, this is going on an on. We have been put through to supervisors, after getting some ridiculous excuses, but still no one is taking hold of our problem/order/situation.
Anyway, we get some good news and all looks hopeful...
Yeah right… we follow the instructions and end up back at step one.
So today I call. I've yet to lose my temper as I don't actually know who to lose it too! But I am getting so fed up with this I'm going to ring the complaints line. Well, there isn't really one, you have to choose technical problems or order problems or whatever to log a complaint.
Before I ring, I look up the number on the internet and that's when I realise the internet has stopped working. The Broadband light is flashing. Here we go!
So I call, she looks at our order and, just like everyone else, doesn't have a clue with what's going on. I explain again and she starts to work out what the problem is. Hurray I'm thinking, we're getting somewhere. She puts me on hold while she speaks to a different dept. Lots of holding. Lots of checking. She come back to me and says someone has prematurely closed the order, this is why the internet has gone off. After 45mins on the phone with her, this one was from the UK, she says that she has put an official stop to it. I have to wait 24hrs, for 'the system' to update and then call another BT number. Excuse me! I HAVE TO CALL. Yes, I do.
Ok, so are we get somewhere now? I'm hoping so. Anyway, because of 'all the 'load of complete b******' I keep receiving, I decide to call this other number now, just to check the information. This number is for 'Technical support'. Mmmm. Doesn't sound right.
After ages on hold, again, I get through to another BT guy. Takes him a while to get to grips with the situation and then works out what is supposed to be happening. On 'the system' the account is open. So I said, she said it is closed but will take 24hrs to update. He understands this and confirms that this is correct. Good, so I ask him if I have to call him again tomorrow to get this engineer booked out.
He says "NO". I have to call another number and he said guess what? Yes, it is the number from the lady I just spoke to: 'Order management'.
What the hell?!?!?!?!
He seems nice and helpful and seems to know what he's talking about so at the moment I'm going with this. Tomorrow I will call and see what happens. If, as he said, the date is too far in advance, then push to speak to a manager to make it happen. Now I appreciate his advice indeed, but come on, why should I even have to call in the first place!!! But, rest assured, I will want an early appointment and I definitely want someone to turn up!
I know I'm rambling on, but this is what the whole scenario is, constant holding, constantly going in circles and I'm writing this to show how bad BT's full service is. People are pleasant on the phone, but not efficient. Nothing is getting done. For christ sake this is a simple upgrade, just send me the modem and the new master phone point and I'll install it my end. I'm an electrician so isn't a problem.
Can anyone tell me why there isn't one person that can take control of my order, liaise with all dept's of BT and sort it out for me? The fact that I have to call another dept is ridiculous after all this palaver!
I'm not happy at all with the level of service from BT, very disappointed and would cancel if I knew it was going to be straightforward!
My rant is ongoing, so we will see what happens tomorrow. No doubt on 'the system' it will say that an engineer turned up but couldn't get in!
Hang on! My partner has just called up from her end! The person she spoke to says what we have been told is half wrong! They are going to call us tomorrow and book an engineer from their dept. What ever dept that is?!
This is terrible. We deserve some compensation from BT for this. But at the very least, some help! We just need someone to help us!
We are waiting for a call tomorrow. I will keep you updated. My hopes aren't high!
So I tried to post…Of course, I can't because the internet is not working! I'll find another way to get it on. Tethering!
Solved!
Go to Solution.

Wow! What can I say?! Ridiculous!
I am going to keep the commentary flowing on my order, on this post, to let anyone thinking of joining BT, know exactly what they will have to go through when things go wrong. Oh yes, and things certainly can go wrong...
So, I got a call back, 3hrs later than promised, but at least I got a call back!
"What seems to be the problem, Sir?"
WHAT!!!!!!!!!!! You are supposed to be finding out and telling me?!
Yes, it was someone completely different who called me back and I had to go through the whole Sarga again. Dont worry, Im getting used to it!
Why couldn't the same person call me back? Anyway, So back to step one. I get put on hold for 20mins listening to morning mood over and over. He then comes back to me and says "So you have infinity installed but you can't get on the Internet?"
Seriously, 20mins on hold for him to come back and say that! We,ve already been through this 20 mins ago. I talks over me as I start again, in baby language. Off on hold again...
Transfers me to someone else after a colleague has a look with him.
On hold....
Morning mood... Again...
Hello Sir, we seem to have a problem with your order and I'm just reading the notes. Can you hold for a bit?
More than happy too...
45mins so far (at least I'm not paying for this one, as I have been using my mobile previously to call, and 0800 isn't free- No landline phone available)
He comes back on the line....
Yes there is defiantly a problem with your order, he says. (By the way, we,re back in the UK, up north somewhere)
He asks me for the best number to contact me on, again, and says that he is passing it over to a specialist team, called the Akrington team, I think he will take a detailed look through my order with a fine tooth Combe, and DEFINITELY get back to me WITHIN 24 hrs.
Naturally, as you would if you were me, you,ve heard it all before and are taking it with a pinch of salt.
Well I say, this is the last chance. If BT do not get back to me, I will not believe anything else they have to say. I am upgrading from broadband to infinity, seriously, how hard can this be????
If there is a problem with the order, and there are multiple orders open on my account, then find my original upgrade request, with the details of what I ordered, close everything and start afresh!!!! Obviously logic can't be used with "The system"!
So today, again, I have wasted the best part of an afternoon of my life dealing with this rubbish and going in circles.
PEOPLE, PLEASE BEWARE AND THINK TWICE BEFORE JOINING BT. I have never complained on an open forum, I'm the type of person who can't be bothered to, but in this case, I feel I have to otherwise I'm not going to get anywhere.
I'm just hoping the moderators on this forum, who've I've heard good things about, can help me sort this out in the next few days. I know it takes a few days for them to investigate and get back to me, (oh, I wonder why they are so busy? Lol) but I think that's what I'm now relying on, the moderators of this forum.
Rest assured, I will keep this post updated, with good or bad news. I just want to show someone else who hasn't joined BT yet, what they might have to go through...

Web Service from stateful Session Bean deleted after server restart

Hi,
i created a stateful session bean and from this a web service.
I am able to deploy it and it works really fine.
My problem is: after a server restart the web service is gone and i
have to deploy it again.
I have some other web services (but these are web services from stateless session beans)
but they "survive" the server restart.
I don't want to deploy the web service after every server restart, did I forget something or
is it a general problem of stateful session beans or web services?
Thanks in advance
Jens

Hello Björn,
I am not quite sure what your problem is but did you have a look at these articles:
http://help.sap.com/saphelp_nw04/helpdata/en/4d/993441c73cef23e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/be/2e2c4142aef623e10000000a155106/frameset.htm
I hope they can give you some idea.
Regads
Vyara

OSB: Calling MTOM business service from non-MTOM proxy

Hi,
it is very easy to call non-MTOM business service from MTOM enabled proxy service, but I don't know how to do it in an opposite way. I have web service proxy (http) with binary data in Base64 in a soap body element and I'd like to call a business service (web service over http again) using MTOM format to send binary data in binary format (and not in Base64 as it is in proxy). Is it possible to somehow decode binary data from Base64 in a proxy service and send them from this proxy to a business service using MTOM?

I understand the flow you propose, but I don't know how to pass decoded data from Java callout back to message flow. As far as I know I can only return primitives, String and XmlObject, because anything else can't be processed in message flow.Yes you are correct.But you can also return DataSource in java callout. Please http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/pojo.html
Now the working solution/POC --Tested on my local linux box
package manoj.javacallout.binary;
import java.io.BufferedReader;
import java.io.ByteArrayOutputStream;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import javax.activation.DataSource;
import javax.mail.util.ByteArrayDataSource;
import com.sun.org.apache.xml.internal.security.utils.Base64;
* TODO: I have use sun internal API for decoding for simplicity. You should modify this code with any base64 decoding library
* Ideally should be using using http://commons.apache.org/downloads/download_codec.cgi
* @author mneelapu
public class Util {
     public static DataSource decodeBase64(DataSource ds) throws Exception {
     InputStream in=ds.getInputStream();
     BufferedReader bin = new BufferedReader(new InputStreamReader(in));
     byte[] decodedB64=Base64.decode(bin);
     ByteArrayDataSource decodedDS= new ByteArrayDataSource(decodedB64,"binary/octet-stream");
     return(decodedDS);
Java Callout to decodeBase64
Parameters
javax.activation.DataSource=[ $body/* ]
Result
javax.activation.DataSource=response
Now replace the $body with the decoded base64 response from java callout
Replace [ node contents ] of [ undefined XPath ]
in [ body ] with [ $response ]
Use $BEA_HOME/modules/javax.mail_1.4.jar for compiling.
Let me know if this solves your problem.
Thanks
Manoj
Edited by: mneelapu on Apr 20, 2009 3:23 PM

Unacceptable services from Bestbuy

I am writing to let you know about bad services I received from the Bestbuy store and on the phone likewise.
This started when I purchased a refrigerator on Apr 19th 2015.
Product: Open Box - 26 CU. FT. FRENCH DOOR REFRIGERATOR
SKU: 1618091Store: Bestbuy, Milpitas CA
The product was listed as "Excellent" item, which according to bestbuy is:
Excellent — Products in excellent condition look brand new in appearance — with no physical flaws, scratches or scuffs — and include all original parts* and accessories. The product will be in its original packaging or a suitable replacement box.
When I received the product, it was missing a part, it had dents on the sides, came without a box, and on top of all, was completely covered in dust from top, had marks of usage inside and on the water dispenser.
This was not the product I had seen in store before finalizing the purchase.
I refused the delivery, and went to the store to let them know that I had received a product in unacceptable condition. The store associate said, "Open box items are sold as it is without any cleaning and / or with missing parts", without any apology. I said, I am aware of your policy, but your policy for excellent item is the one I am debating on. The lady wasn't helping at all, so I left the store to come back later for refund.
Even after this bad experience, I thought of giving best buy another chance, and ordered the same refrigerator in new.
Date: Apr 27th, 2015
Purchased Online (Due to bad store experience)
I had the refrigerator delivered on Apr 29th 2015. During the delivery from the so called "professtional delivery guys", they literally ripped off a portion of the wall inside the house. Those guys said, it usually happens.
I said, this is not at all acceptable, and immediately called up bestbuy to report a claim.
The delivery guy was also included in the call to confirm the damage.
The claim was filed on 29th April 2015.
I assumed the Bestbuy would call me up for the followup on this, but no call came. I called up multiple times to check on the claim and instead I was routed from Bestbuy to GnD claims to some delivery company.
Today is 18th May 2015 (Approx 20 days since the claim has been filed, and no updates have been provided till now)
Again, not at all expected service from the company who says, "Customer First".
I purchased the item from Bestbuy, and Bestbuy alone should be answerable to the customer problems and not any third company, with whom I have to follow for updates.
If this is the behavior from the Bestbuy towards its customer, then tell me one good reason why I shouldn't return the product and get it from some other competitor which might give me a better service than bestbuy.

Hey anjulg,
If the first refrigerator was listed as in excellent condition then that what it should have been when we attempted to deliver the unit. I am honestly sorry this was not the case, and with how long it is taking us to address the claimed damage to your home.
I do see that Ash from our Executive Resolutions Team is currently looking into your claim of damages to your home, and you should hear from them soon.
Thanks for posting,
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

ERROR Consuming external Web Services from JDE E1

Hello everybody,
I am trying to consume external web services from JD Edwards Enterprise One. For that, I have followed "Consuming External Web Services Tutorial".
I have followed all the steps successfully, but when the final test called from an interactive application to the business function that I had created in C get the following error messages in the log file:
[WARN ] JDE - [RUNTIME] *ERROR CallObject@13d346d: CallObject.executeRequest(): Problem executing function [consumingWS] lib [CALLBSFN] GetProcAddress failed. Please see Enterprise Server log for details. Business function cannot be found user:JDE Env:DV900*
[SEVERE] JDE - [RUNTIME] FormEngine.doEvent(): BSFN failed and need roll back!! | Form Name : P5500055_W5500055A com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function consumingWs.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function consumingWs.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
at com.jdedwards.runtime.engine.form.FormEngine.doEvent(Unknown Source)
at com.jdedwards.runtime.vtcomponent.form.VTForm.doEvent(Unknown Source)
at com.jdedwards.runtime.engine.ButtonEngine.onClick(Unknown Source)
at com.jdedwards.runtime.vtcomponent.VTButton.onClick(Unknown Source)
at com.jdedwards.runtime.vtcomponent.VTButton.processVirtualEvent(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.processVTEvent(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.processEventLoop(Unknown Source)
at com.jdedwards.runtime.virtual.OWVirtual.run(Unknown Source)
at com.jdedwards.base.util.ThreadPool$WorkerThread.run(Unknown Source)
I have tested:
1) Incorrect OCM for BSFNs.
Mapped to development Enterprise Server, so it was failing to find the BSFN.
2) Increase heap space for Java.
3) Business Function Location (C/S): "Both Client & Server Function"
4) Link the Business function with its parent DLL (CALLBSFN.dll)
I'm not sure I'd done well...
5) Update Package
From Buildlog.txt I can see the following error:
Copying \\ORACLE-JDE\E900\DV900\package\DV900FB\lib32\sCALLBSF.lib to \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\sCALLBSF.lib
Copying \\ORACLE-JDE\E900\DV900\package\DV900FB\work\jdertdll.c to \\ORACLE-JDE\E900\DV900\package\DVU100427\work\jdertdll.c
Generating Makefile: E:\e900\DV900\obj\CALLBSFN.mak
B5500055 : Not checked into pathcode, excluded from the build
.Makefile generated.
Building business functions.
************CALLBSFN************
jdertdll.c
Creating library \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\CALLBSFN.lib and object \\ORACLE-JDE\E900\DV900\package\DVU100427\lib32\CALLBSFN.exp
CALLBSFN.exp : error LNK2001: unresolved external symbol _consumingWS@12
\\ORACLE-JDE\E900\DV900\package\DVU100427\bin32\CALLBSFN.dll : warning LNK4088: image being generated due to /FORCE option; image may not run
To not build the business function is not possible the package deployment for the server becomes aware of the presence of this business function...
But I have not managed to solve the problem, do you have any idea?
Thank you and regards.

Hello again,
I have modied OCM record with a correct BSSV (the name and the port number were wrong).
And other thing that I have tested is change the parent DLL with a new DLL created by me (Object Name: CALLWS.dll, Product Code: 0, Product System Code:0) and the error is:
*ERROR CallObject@25b780: CallObject.executeRequest(): Problem executing function [invocarWS] lib [CALLWS] LoadLib failed.Please see Enterprise Server log for details. Library in which business funtion resides cannot be loaded user:JDE Env:DV900*
[SEVERE] JDE - [RUNTIME] FormEngine.doEvent(): BSFN failed and need roll back!! | Form Name : P5500055_W5500055A com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function invocarWS.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
com.jdedwards.runtime.base.SystemException: There was a problem with the sever while running the business function invocarWS.\nThe current transaction has been lost.\nPlease exit the application and restart it.\nButton clicked Line number 1\nP5500055_W5500055A
     at com.jdedwards.runtime.engine.form.FormEngine.doEvent(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.form.VTForm.doEvent(Unknown Source)
     at com.jdedwards.runtime.engine.ButtonEngine.onClick(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.VTButton.onClick(Unknown Source)
     at com.jdedwards.runtime.vtcomponent.VTButton.processVirtualEvent(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.processVTEvent(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.processEventLoop(Unknown Source)
     at com.jdedwards.runtime.virtual.OWVirtual.run(Unknown Source)
     at com.jdedwards.base.util.ThreadPool$WorkerThread.run(Unknown Source)
It seems like it is not possible to find the CALLWS dll... Althought it was built and compiled without errors and warnings...
I would like to debug the Business Function in C from Microsoft Visual Studio 2005, but I can't, because breakpoints are disable.
I have followed the following manual:
E1: BSFN: Debugging Business Functions Using Visual Studio .NET 2003, 2005 and 2008 (I have founded it in Oracle Support (Metalinki)).
And here they say:
"It is a normal feature of visual studio 2003/2005 to disable break point at the start of a debug session and display a warning saying no symbol is loaded. Break point will only be activated on demand when the code to debug is loaded in to the runtime memory".
I think is necessary add the referency with parent DLL (in my case, CALLWS.dll) but I don't know how can I do it. I have tested to insert in Business Function's source code the following line:
"#pragma comment(lib,"CALLWS.dll")" to force to include it, but when it was built:
************CALLWS************
B5500055.c
Replacing B5500055.obj
jdertdll.c
Creating library E:\e900\DV900\lib32\CALLWS.lib and object E:\e900\DV900\lib32\CALLWS.exp
LINK : fatal error LNK1104: cannot open file 'CALLWS.dll'
Microsoft (R) Manifest Tool version 5.2.3790.2075
Copyright (c) Microsoft Corporation 2005.
All rights reserved.
mt.exe : general error c10100b1: Failed to load file "E:\e900\DV900\bin32\CALLWS.dll". The system cannot find the file specified.
Adjusting DLL load addresses . . .
************Build Finished************
I don't understand nothing, because the path is totally right.
Any help is appreciated!
Thank you and regards.
Edited by: user12085357 on 29-abr-2010 2:55
Edited by: user12085357 on 29-abr-2010 3:02

Unable to start obiee services from "Services"

I am not able to start obiee services from services.msc on my local. (Windows XP)
I get the following error while trying to start Oracle BI Java Host:
The Oracle BI Java Host service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
Error while starting Oracle BI Presentation Service:
Windows could not start the Oracle BI Presentation Service on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code -1.
Error Description from System Event Log:
The Oracle BI Presentation Server service terminated with service-specific error 4294967295 (0xFFFFFFFF).
Error while starting Oracle BI Server:
Could not start the Oracle BI Server service on Local Computer.
Error 1067: The process terminated unexpectedly.
Can somebody please help me with this.
Thanks,
Swetha

Hi,
Regarding the Java Service have you installed the Java JDK (can be found here ) in a directory that contains no spaces?
Installing it in Program Files will cause issues so perhaps reinstall it into a location like C:/Java/jdk1.6/
After installing it to the new location you will need to update the instanceconfig.xml file (mine is located C:\OracleBIData\web\config\instanceconfig.xml).
Change the location of the Java Home between these tags to the root of your newly installed Java sdk. eg <JavaHome>C:/Java/jdk1.6</JavaHome>
Try launching the service again.
Let me know if this works or doesn't,
J
Edited by: J Kremer on 05-Apr-2011 00:18

Moving Services from One Home to Another Takes 3 weeks or more.

I just recently moved to a new home and prior to moving, I called Verizon to move my phone services from the old house to the new one. After completion of the services I requested (very simple just give me a dial tone) for the new home, I was provided with a schedule date of 3 weeks from the date I called. When I asked for the reason, I was told that there is a great demand for Verizon Fios and this will impact the time for them to get to me to setup service. I told the customer service rep. that all of those people probably already have phones and why is there such a long wait time just to establish phone service at a new site. Again, I was told of the high verizon fios demand. On top of that, I called again to speak with an Escalation Specialist about my problem and Verizon gave me the runaround. At first they asked a bunch of questions about why I needed to talk to an escalation specialist and then I was transferred only to be kept on hold for about 30 minutes. Two days of this and I am still trying to understand from someone at Verizon why I have to be without a phone for 3 weeks. This delay has delayed everything, security, cable (for messaging) you name it. Verizon has the worst customer service I have ever experienced. I hope that I dont have any problems with my phone service once it is installed. Either way I am afraid with the terrible customer service and response time. I will be jacked if I have any type of emergency. This same scenario happened to a friend of mine and what was even worse a Verizon technician was next door and told my friend that he could not provide service to her or else he would be fired. If a verizon technician is in the area what is the problem with providing service especially if he is right next door. Makes no sense....Poor customer service.

Someone will probably give you a real-world example of how to do it, but to get you started you may want to review the Hyperion Security Administration guide, section "Migrating Native Directory" which discusses that you need to first install the Import/Export Utility on your Shared Services server, then create an export file, then go to your target Shared Services Server and long story short, import it.
-Karen

**** SERVICE FROM BT AGAIN !!!!!!!!!!!!!!!!!!!!!!!...

Similar Messages

Maybe you are looking for