Service packs and patch MS14-044 keeps failing during a installation on a cluster

Hi,
We have a cluster with several sql2008 R2 instances and recently we had to add one more. But now when we try to apply a service pack or patch on that instance on one the same node the installation fails. They all fail with the same error:
SP1
2014-09-17 12:53:40 Slp: Parameter 0 : SQL2008@RTM@KB2528583
2014-09-17 12:53:40 Slp: Parameter 1 : 0x4A9286D0
2014-09-17 12:53:40 Slp: Parameter 2 : 0x4A9286D0
2014-09-17 12:53:40 Slp: Parameter 3 : 0x54657B2B
2014-09-17 12:53:40 Slp: Parameter 4 : 0x54657B2B
SP2
2014-09-16 12:56:23 Slp: Parameter 0 : SQL2008@RTM@KB2630458
2014-09-16 12:56:23 Slp: Parameter 1 : 0x4A9286D0
2014-09-16 12:56:23 Slp: Parameter 2 : 0x4A9286D0
2014-09-16 12:56:23 Slp: Parameter 3 : 0x54657B2B
2014-09-16 12:56:23 Slp: Parameter 4 : 0x54657B2B
MS14-044
2014-09-16 20:55:15 Slp: Parameter 0 : SQL2008@RTM@KB2977320
2014-09-16 20:55:15 Slp: Parameter 1 : 0x4A9286D0
2014-09-16 20:55:15 Slp: Parameter 2 : 0x4A9286D0
2014-09-16 20:55:15 Slp: Parameter 3 : 0x54657B2B
2014-09-16 20:55:15 Slp: Parameter 4 : 0x54657B2B 2014-09-16 20:55:05 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.InitializeUIDataAction" threw an exception during execution.
2014-09-16 20:55:06 Slp: Received request to add the following file to Watson reporting: C:\Users\adm_koomenh\AppData\Local\Temp\tmp7FDE.tmp
2014-09-16 20:55:06 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2014-09-16 20:55:06 Slp: Inner exceptions are being indented
2014-09-16 20:55:06 Slp:
2014-09-16 20:55:06 Slp: Exception type: System.Resources.MissingManifestResourceException
2014-09-16 20:55:06 Slp: Message:
2014-09-16 20:55:06 Slp: Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "Errors.resources" was correctly embedded or linked into assembly "Microsoft.SqlServer.Discovery"
at compile time, or that all the satellite assemblies required are loadable and fully signed.
2014-09-16 20:55:06 Slp: Stack:
2014-09-16 20:55:06 Slp: at System.Resources.ResourceManager.InternalGetResourceSet(CultureInfo culture, Boolean createIfNotExists, Boolean tryParents)
2014-09-16 20:55:06 Slp: at System.Resources.ResourceManager.GetObject(String name, CultureInfo culture, Boolean wrapUnmanagedMemStream)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Discovery.MsiException.GetErrorMessage(Int32 errorNumber, CultureInfo culture)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Discovery.MsiException.GetErrorMessage(MsiRecord errorRecord, CultureInfo culture)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Discovery.MsiException.get_Message()
2014-09-16 20:55:06 Slp: at System.Exception.ToString()
2014-09-16 20:55:06 Slp: at System.Exception.ToString()
2014-09-16 20:55:06 Slp: at System.Exception.ToString()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.RunRequestedWorkflow()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.Run()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.Start()
2014-09-16 20:55:06 Slp: at Microsoft.SqlServer.Chainer.Setup.Setup.Main()
2014-09-16 20:55:15 Slp: Watson Bucket 1
Original Parameter Values
2014-09-16 20:55:15 Slp: Parameter 0 : SQL2008@RTM@KB2977320
2014-09-16 20:55:15 Slp: Parameter 1 : System.Resources.ResourceManager.InternalGetResourceSet
2014-09-16 20:55:15 Slp: Parameter 2 : System.Resources.ResourceManager.InternalGetResourceSet
2014-09-16 20:55:15 Slp: Parameter 3 : System.Resources.MissingManifestResourceException@-2146233038
2014-09-16 20:55:15 Slp: Parameter 4 : System.Resources.MissingManifestResourceException@-2146233038
2014-09-16 20:55:15 Slp:
Final Parameter Values
Note that on the other cluster node we have no problem at all but patching one side and the other is a no go.
regards
Hans Koomen

1st instance: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) Jul 9 2014 16:04:25 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2nd instance: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) Jul 9 2014 16:04:25 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
3rd instance: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4033.0 (X64) Jul 9 2014 16:04:25 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
4th instance: Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64) Apr 2 2010 15:48:46 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
Furthermore using http://support.microsoft.com/kb/2015100/es we find this:
PRODUCT NAME : SQL Server 2008 R2 SP2 Database Engine Services
================================================================================
Product Code: {2E81ADBE-DED7-4B54-9C8D-FBD885C259C5}
Version : 10.52.4000.0
Most Current Install Date: 20140718
Target Install Location:
Registry Path:
HKEY_CLASSES_ROOT\Installer\Products\EBDA18E27DED45B4C9D8BF8D582C955C\SourceList
Package : sql_engine_core_inst_loc.msi
Install Source: \1033_ENU_LP\x64\setup\sql_engine_core_inst_loc_msi\
LastUsedSource: n;1;E:\software\SQL2008R2_Std_X64\1033_ENU_LP\x64\setup\sql_engine_core_inst_loc_msi\
sql_engine_core_inst_loc.msi exists on the LastUsedSource path, no actions needed.
Installer Cache File: C:\Windows\Installer\21807f.msi
while the log states:
2014-09-19 14:56:31 Slp: Package sql_engine_core_inst_loc_Cpu64_1033: - The path of cached MSI package is: C:\Windows\Installer\21807f.msi . The RTM product version is:
10.50.1600.1

Similar Messages

How to find out the IPS and DS Service Pack and patch levels in windows server.

Hi,
I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS in windows PRD system for this how could we find out the exact version of IPS & DS ( Service pack and patch levels ) and where we can find the same.
Many Thanks,
Sudheer

Hi Sudheer,
On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
option 2:
Open CMC go to Settings. In the properties, you will find the Product Version.
Please check below SAP notes for more information.
http://service.sap.com/sap/support/notes/1602088
Regards,
Pavan

Difference between service pack and Patch in XI

What is the difference between Service Pack(SP) AND Patch ??
e.g SP12, Patch8.
Is it like that when there is a major change they will issue SP and
for a small change they will issue patch ?? or after number of patches
they will issue SP combining all the patches ??
Service Pack level can be seen from SAP gui system..>status.
But Patch level where can we see ?? what is the Tcode for that ?? or just we got
to go through below links ??
http://<host>:<j2ee_http_port>/sap/monitoring/ComponentInfo
also
http://<host>:<j2ee_http_port>/sap/monitoring/SystemInfo for core system info (J2EE or JVM patch level, etc.)
thanks
kumar

Hello,
A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features
A patch (sometimes called a "fix") is a quick-repair job for a piece of programming. During a software product's beta test distribution or try-out period and later after the product is formally released, problems (called bug) will almost invariably be found. A patch is the immediate solution that is provided to users; it can sometimes be downloaded from the software maker's Web site. The patch is not necessarily the best solution for the problem and the product developers often find a better solution to provide when they package the product for its next release.

Where to find the latest Service Packs and Patches

AccAD service packs can be downloaded from SAP Service Market Place (SMP), under 'Comprised Software Component Versions'
The process for downloading the package is described below:
1. Go to SAP Support Portal - [https://service.sap.com/swdc]
2. Under Find your Software, see the 2nd bullet titled A-Z Index, and click on the link to Support Packages and Patches
3. Click on the letter A
4. Click on ACCEL. AD FOR SAP NETWEAVER
5. Click on AAD 2.2 FOR SAP NETWEAVER
6. Click on Comprised Software Component Versions
7. Click on AAD APPL DELIVERY ENGINE 2.2
8. Click on the OS version that matches your AccAD landscape
9. Scroll down to the window and find the Downloads window.
10. Look for the latest version by scrolling down further (internal scrollbar) and pay attention to the Last Changed date column.
11. Click on the link to the TGZ package which will start the download
Zeev

Hi Stephan,
I wanted to add onto Zeev's precise answer.
First of all we appreciate your feedback, we will look into why the above mentioned links are not updated as expected.
Regretfully our SDN page is a bit outdated and we are in the midst of updating it.
Currently, AccAD 2.2 SP4 as available for download and has already been adopted by some of the main SAP customers and in addition by new customers.
The release notes indicating the differences can be found as part of the installations but I hope to provide the 2.2 SP4 notes later this week - in a formal SDN announcement.
Further more as for additional updates:
- AccAD 2.3 is currently undergoing validation phase and is expected to enter Ramp Up phase in October of 2011.
- AccAD 2.3 as with every version brings with it new capabilities and increased performance and quality as well as a more up-to-date PAM.
- We are currently in the planning phase of the next AccAD version to begin development very soon and would be very happy to hear the feedback that you or any other of our customer base may have. To do so, I encourage you to contact me directly - as i cannot post an email address here - my details can be found in my business card found in this forum.
- We will be attending and presenting at SAP TechEd Las Vegas and TechEd Sapphire Madrid - we would be happy to meet up in case you will be present.
All the Best,
Smadar
Edited by: Smadar Ludomirski on Sep 11, 2011 9:29 AM

What correct Service Pack and Fix Patch upgrade path?

I have installed Xcelsius 2008 Engage. I have version 5.0.0.99 build 12,0,0,121. I am assuming this is the base installation.
There have been a number of packs and patches released. I need to if I have comprehended. Is sequence below correct:
1. Crystal Xcelsius 2008 u2013 Service Pack 1
2. Xcelsius 2008 SP1 Fix Pack 1
3. Xcelsius 2008 Service Pack 1 u2013 Fix Pack 2
4. Xcelsius 2008 Service Pack 1 u2013 Fix Pack 3
5. Xcelsius 2008 Service Pack 2
6. Xcelsius Enterprise 2008 SP2 Fix Pack 2.1
Other consideration:
I have heard much discussion about Xcelsius.msi. Is this file in (1) above and does (2) above require it to be available.
I am using Windows 7.0
Any other suggestion to avoid a painful process

Hi,
I'll answer some of your questions:
You can just install the base version and then SP2 + FP 2.1. No need to install SP1 and the related fix packs.
.msi is just an installer file - once you've installed Xcelsius this will not be used anymore.
I'm not sure that Xcelsius is supported on Windows 7.
Best regards,
Jacob

Zen 3.2 snap shot to force out windows 2000 service packs and critical patches

Zen 3.2 snap shot to force out windows 2000 service packs and critical
patches
has anyone used MSI to do the installations of services packs.

All Hotfixes and SPs have switches on the EXEs to allow for silent
installs.
This is the recommended method of deploying these.
[email protected] wrote:
> Zen 3.2 snap shot to force out windows 2000 service packs and critical
> patches
> has anyone used MSI to do the installations of services packs.

Install the latest Service Pack and Cumulative Update

Hi Expert,
I am installing SAP on SQL SERVER 2008 R2. The database software installation is done,but as per
installation guide it is recommending to install "Service Pack and Cumulative Update" as SAP Notes 62988
Please suggest me if i donot install service pack then will it impact our installation?
Please relply ASAP.

Its always recommanded to have your database at patch level and cummulative update supported by SAP.
If you don't perform now then you have to take again downtime to perform this activity.
Regards,
Nikunj Thaker

EPM9.3.1: Difference between service pack and service fix

Hi,
Tell me pls, what is a difference between service pack and service fix of Oracle EPM products for 9.3.1 release?
Is it an installation process difference&

Hi,
Usually a service pack is a consolidation of service fixes / patches.
Cheers
John
http://john-goodwin.blogspot.com/

Service packs and hot fixes for BusinessObjects Enterprise XI 3.1

Hello Experts.
Which is the cronology or order of the service packs and hot fixes for BusinessObjects Enterprise XI 3.1, or which are tha latest?
thanks

For BO XI 3.1, SP 5 is the latest, released in August 2011. You can directly install SP5 if you already have SP3 installed.
Previous Service Pack is 4.0 and Fix Pack 4.1.

2008 Engage Server Service packs and Fix Packs

I have Engage Server. I tried to load SP 3 and it didn't let me open old files. SAP told me SP3 was not compatible with Server product. I had to roll back to base version 5.0.0.99 build 12,0,0,121. Does anybody know if I can at least load SP1 or SP2 (and/or Fix packs) so I can have some of the basic features?

Your first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues.

SAP List of Supported SQL Server Service Packs and Cumulative Updates

Does SAP provide a list of SQL Server Service Packs and Cumulative Updates that will work with BPC 7.0 and 7.5? I see that CU 12 is out for SP1 and CU 2 is out for SP2. I would like to know if I can move the SP2 CU2 or SP1 CU12. My install docs are outdated specifying SP1 CU6.
Any direction is appreciated.
Joe

Hi,
Please take a look at the below list of the supported OS: This excerpt is from the installation guide.
SP04 or later: Windows Server 2008 R2 Standard or Enterprise Edition with or without Hyper-V
Windows Server 2008 Standard or Enterprise Edition with or without Hyper-V, or
Windows Server 2008 Data Center with or without Hyper-V
Windows Server 2003 Standard or Enterprise Edition SP2
Windows Server 2003 Standard configured on the SQL database or OLAP server components only
Windows Server 2003 R2 Standard or Enterprise Edition SP2
SAP recommends using Windows Server 2008 64 bit over Windows Server 2003 64 bit. Otherwise, supportability is limited.
I am not sure what did you mean by the front end. Having said that, 32 bit is supported both on the server and the client machines.
Hope this helps.

Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration

Please guide the path in Service Market Place to find CR2008 latest Service Pack and CR2013 latest Service pack with Visual Studio integration for CR2013; I have S userID and log in; but could not locate the place to download

Hi,
I believe you are right!, The support portal is Showing Crystal Report for VS not the other one;
Our S User ID is out dated might be; It was created when CR 2008 was purchased. But we bought CR2011 license recently as mentioned below.
Below is the product purchased by our organization
CR 2011 INTL UPGR WIN NUL LICENSE - 1 to 2 Licenses, mix and match.
Does this version have maintenance rights?
I tried registering at Service MarketPlace hoping to get new S-User ID; Am i right path to get the new S- USerID ?
During registering it asked for "Customer or Installation Number (1) *" ; Where can i get this info or number; Kindly suggest

Service Packs and Fix Packs for Business Objects XI Release 2

Hi,
How can I know wich services pack or fix packs are installed on my server? I have installed Business Objects XI Release 2, and Xcelsius 2008 Release 2, and Live Office.
Do you know where can I download a spreedsheet that contains informatiion about the fix packs or service packs and the issues that solved??
Thanks
Lilia

Your first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues.

I have an iphone 4 and have tried updating to IOS 6 via my laptop and phone but it keeps failing why is this and what do i do

i have an iphone 4 and have tried updating to IOS6 via my laptop and phone but it keeps failing why is this and what do i do ????

Find the .IPSW file that was downloaded and delete it, then re-download it.
If you're using a PC, shut off your antivirus and firewall software during the process.

Difference between service pack and support pack

Hi,
what is the exact difference between service pack and support pack. Are they same?
The version details presnt in integration builder -> help-> inforamtion of my XI server are as follows :
Service pack: 09
Release: 645_VAL_REL
does it mean that the both support package and service package for my XI server are 09?
thanks in adavance
regards
Jagruthi

1. A service pack (in short SP) is a collection of updates, fixes and/or enhancements to a software program delivered in the form of a single installable package. Service packs are usually numbered, and thus shortly referred to as SP1, SP2, etc. It is notable that they may bring, besides bug fixes, entirely new features.
http://help.sap.com/saphelp_nw04/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
Service packs in 2004 and 2004s;
in 2004 - in 2004s
SP12 & < - SP04 http://XI 3.0
SP13 + 14 - SP05 http://PI 7.0
SP15 - SP06
SP16 - SP07
SP17 - SP08
SP18 - SP09 and so on...
2) Support pack -
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/5bc53f3e0f0228e10000000a114084/frameset.htm
For the ABAP parts of usage type PI, this is the implementation of support packages. For the Java parts, the deployment with the Java Support Package Manager (JSPM) is used.
You can find currently available support packages on SAP Service Marketplace at service.sap.com/sp-stacks.
A description of how to apply support packages is available in SAP Note 879289.

Service packs and patch MS14-044 keeps failing during a installation on a cluster

Similar Messages

Maybe you are looking for