Service Processor on X4100 and 4200

How can I send order from inside solaris 10 to the Service Processor on the X4100 and 4200 ?
We use the serial consol to log messages from the system (helpful for crash or panic), but with the X4100 or 4200 the service processor manage the serial link and we have to do 'login' and start /SP/console to get solaris 10 console.
I would like to automatically start the console from inside solaris if it's not started or to configure the SP in console automatically after a power-on.
Thanks

Thanks, I granted the user with permission sysadmin, but still I am facing the problem.
Let me download SP3 and SP4, if that could solve my problem.
Hello,
Please refer to below blog,See workaround mentioned in below blog.I am quite sure this would be fixed in SP3 or SP4 but first please apply this workaround and then install SP4.
Unable to start SQL server agent
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

  • V20z service processor

    Before I call Sun, I thought I'd ask here:
    I have a brand new SunFire v20z that I am trying to manage remotely. I had no problem getting the service processor set up and connecting to it, and I was able to access it for several days. It worked fine.
    Then I went away for a few days, and when I returned, the SP had very slow response, and randomly started hanging up on me and killing the running command. I thinbk
    bash-2.03$ ssh -l spuser 10.0.0.7
    spuser@10.0.0.7's password:
    Sun Microsystems
    IPMI v1.5 Service Processor
    Version: V2.0.0.48
    localhost $ help
    help: not found
    localhost $ platform help<br />Killed<br />localhost $ sp help
    Connection to 10.0.0.7 closed.
    What made the SP so sick? Any ideas? TIA
    Jeremiah

    I had this on a V20z. It seemed to start intermittently a few days ago but this evening it was doing it consistently. It was doing it when trying to use SP commands 'platform console' and 'sp get events', though 'sp reboot' did work and thankfully seems to have cleared the problem.
    The SP reboot was necessary as a last resort because I had some planned work to do in an agreed outage and needed to boot the server a few times, so needed proper console access, i.e. I needed to sort out the SP problem to allow console access which we reach via the SP.

  • Service Processor Issues v20z

    Apologies if this question is in the wrong forum, although I believe it is a hardware related issue.
    My issue relates to the Service Processor on a v20z. Basically, it seems to reset itself every few minutes and will not retain any information at all, which intern has caused the fans to stay on at 100%, all the time now, which is concerning. Once on it says "Main power off". The SP will then reset itself not long after.
    This started when I decided to rebuild one of our V20z servers, as Solaris 10 did not like the raid card when in it's early versions. Anyway, I have successfully installed the latest Solaris 10 build, 1/06 X86 (of course seeing the Athlon cpu's). After this I felt the need to get console working properly, as it was not before. I changed the eeprom as documented with the input and output pointing to the console.
    At this point I decided I should get the Service Processor working, as I had not read anything about it previously. I managed to manually assign it an ip address, which it kept. I then had to reboot the server for other reasons, and the SP would not keep its IP details. It will not even obtain one via dhcp, comes up with "Service Error on set IP DHCP".
    I have tried updating the bios etc, by manually entering in the information on the lcd screen, however have had to such luck either. I have a funny feeling I have broken something as there does not appear to be anyone with the same type of issues. From everything I have read everyone else seems to have no issues at all. Some advice would be greatly appreciated, as I've been tearing my hair out for a few days now over it.
    Many Thanks
    Simon

    It's ok I figured it out. Embarasingly simple really
    eeprom output-device=ttya
    eeprom input-device=ttya
    This is awesome, just look at this. I'm twenty miles from the server booted in single user mode.
    Yes, more sleep time for me less late nights at the office. Sorry if this is old hat to you guys, It's the first time I've seen it on any servers I've owned.
    Select (b)oot or (i)nterpreter: b -s
    SunOS Release 5.9 Version Generic_117172-17 32-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    configuring IPv4 interfaces: bge0.
    Hostname: v20z1
    INIT: SINGLE USER MODE
    Type control-d to proceed with normal startup,
    (or give root password for system maintenance):
    single-user privilege assigned to /dev/console.
    Entering System Maintenance Mode
    Jun 22 22:52:10 su: 'su root' succeeded for root on /dev/console
    Sun Microsystems Inc. SunOS 5.9 Generic January 2003
    # ifconfig -a
    lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 192.9.200.10 netmask ffffff00 broadcast 192.9.200.255
    ether 0:9:3d:11:c7:c0
    Nice one SUN...
    Pity I couldn't Install solaris 9 on the v20z's from the CDs in the first place though (I needed to install from an install server).

  • SMC agent on M9000 service processor

    Hi, I'm trying to monitor an M9000 Platform
    at this time domain agents are up and running but the service processor agent's is stopped and I can't find how to start it.
    this is the output from setsunmc and showsunmc
    XSCF> setsunmc -s 140.126.65.82 -z segob -c public -p 1161 -t 162 -e 163 -a 161 -d 1161
    setsunmc: Updating Sun MC config file
    XSCF> showsunmc
    Agent Status: Disabled, stopped
    Setup Status: Set up
    SunMC Server: 140.126.65.82
    Security Seed: segob
    SNMPv1 Community String: public
    Agent Port: 1161
    Host Trap Port: 162
    Host Event Port: 163
    SNMP Agent Port: 161
    Domain Agent Port: 1161
    XSCF> setsunmc enable
    setsunmc: Agent enabled.
    setsunmc: Note that this command will return before SunMC is completely enabled.
    XSCF> showsunmc
    Agent Status: Enabled, stopped
    Setup Status: Set up
    SunMC Server: 140.126.65.82
    Security Seed: segob
    SNMPv1 Community String: public
    Agent Port: 1161
    Host Trap Port: 162
    Host Event Port: 163
    SNMP Agent Port: 161
    Domain Agent Port: 1161
    Do you have any clue why Agent won't start?
    Thanks for any comment

    Dear Sir,
    I also have this problem on our M9000. And I have set and enabled the SNMP then set and enable SunMC, but the Agent status is still "Enabled,Stopped". Please refer to below information and check what's wrong for me, thanks a lot.
    XSCF> setsunmc disable
    setsunmc: Agent disabled.
    setsunmc: Note that this command will return before SunMC is completely disabled.
    XSCF> setsnmp disable
    setsnmp: Agent disabled.
    XSCF> setsnmp enable
    setsnmp: Agent enabled.
    XSCF> setsunmc enable
    setsunmc: Agent enabled.
    setsunmc: Note that this command will return before SunMC is completely enabled.
    XSCF> showsnmp
    Agent Status: Enabled
    Agent Port: 161
    System Location:
    System Contact:
    System Description: SMP HPC of SPARC Enterprise M9000-64
    Trap Hosts:
    Hostname Port Type Community String Username Auth Protocol
    192.168.1.100 162 v2 public n/a n/a
    SNMP V1/V2c:
    Status: Enabled
    Community String: public
    Enabled MIB Modules:
    SP MIB
    FM MIB
    XSCF> showsunmc
    Agent Status: Enabled, stopped
    Setup Status: Set up
    SunMC Server: 192.168.1.100
    Security Seed: 1211
    SNMPv1 Community String: public
    Agent Port: 1161
    Host Trap Port: 162
    Host Event Port: 163
    SNMP Agent Port: 161
    Domain Agent Port: 8161
    Edited by: Yu-Hung on Apr 1, 2008 12:31 AM
    Edited by: Yu-Hung on Apr 1, 2008 12:35 AM

  • Creation of Service Master Record (Furniture and Fixture Maintenance)

    Hi,
    I want to create a Service Master for "Furniture and Fixture Maintenance".
    What should I keep in mind while creating a Service Master Record.
    Would like to know the about the following fields which seems to be useful:
    Activity Number:
    Base Unit of Measure:
    Material Service Group:
    Division:
    Valuation Class
    Service Type
    Is there any other fields which I should keep in mind.
    Regards,

    Thanks Murgun for the reply.
    Sorry for late response from my side.
    1. What is use of Service Category. Do we need to use the default or we need to configure as per our requirement.
    2. while creating Service Order, we need to enter Single Short Text in Item & Multiple Short Texts in Item Details. What is the actual use of providing  Multiple Short Texts in Item Details.
    3. Can we use the Service Master in both in Item Short Text & Item Details Short Texts.
    Regards,

  • Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

    After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services.  From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
    "Provision Subscriptions and Alerts".  I've tried both options on this screen.  I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen. 
    The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
    screen:
    Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
    The "status" on the screen still shows "SQL Server Agent State cannot be determined".  Has anyone else seen this? 
    Thanks!!

    Thanks for your reply!
    1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown.  As a result, I don't see how to set the service account.  It's only assigned to an application pool. 
    I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
    2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen?  I already have the farm admin account which is the account I use when running Central Admin.
    3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
    4) This link is for Reporting Services 2008 R2 which is very different install process.  But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors. 
    I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
    Thanks!

  • HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

    All is in the title, so I repeat it below with a better identation.
    What are the pros and cons of
    1) choosing to use the SAME
                                                  Apple ID for iCloud services on one side, and
                                                  purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
    2) to have and use two separate Apple Ids for these "two sides"?
    P.S.
    I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
    Also need to mention that I have itunes on a mac, a pc and an iphone.
    Sorry to look so silly with this question, but I don't get the "big picture".

    You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

  • When i Put my Ipod Touch 2nd gen in my computer it says Apple Mobile Device Service has stopped working and does not show up in itunes Help?

    well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
    ipod touch 2nd gen
    http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png

    Try this:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

    Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

    I had a similar occurrence with my just activated iPhone 4.
    I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
    I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

  • Droid RAZR (not MAXX) 4G, service drops on GB and ICS

    Okay, the forums are full of threads concerning this issue. The phone loses data connectivity as well as voice. Every person seems to have a different opinion as to when or where their service drops, and I have tried to find a fix (official or not) since I first got my RAZR.
    I got my phone sometime in March 2012 from a Verizon store during a promotion. I was happy I can get a phone with better hardware than my DROID X (awesome phone-best I ever had). I didn't care much about the 4G, but I considered it a perk for upgrading.
    1. A day later I started having problems with my service. The 4G connection would drop, the 4G icon would turn white and then disappear for good. The phone would have no data connection at all but a few seconds later the white 4G icon would reappear and turn blue later. I thought it is because the 4G coverage is spotty as I was constantly moving from one place to another. But I got home (where I never had problems and Verizon service was always excellent) and it would do the same thing.
    2. I have data connectivity and voice service but I turn off the screen. When I turn the screen back on, data connection is lost and I have no service available. I had one error that said "SIM card invalid" or something like that a few times. On Gingerbread I just switched to 3G only and I had no problems. But every time I switched back to use the LTE, I had the same problem over and over.
    3. Upgraded to ICS as I figured Motorola and Verizon worked together to find a "cure" for these sudden service losses. I was wrong. With ICS it is even worse. I lose data and voice service very often. In store, Verizon employees are telling me they have never seen problems like mine (liars?). On the phone with CS I am told they do not know of any issues similar to mine. But forums are full of threads of people having the same issue. Answers from VZ employees are not very clear and directs people to a simple Factory Reset, cleaning the SIM card, reinserting the SIM card... basic stuff a monkey could think of too.
    4. Some times after a phone conversation, I hang up and immediately after, my service drops. I have to turn the screen off and then back on after about 5 seconds, the service is still nowhere to be seen, but if I leave the screen on for about 10 seconds, the phone will regain its connectivity to the network. THIS HAPPENS IN 3G COVERAGE AS WELL AS 4G NOW.
    Steps taken: Downloaded the Motorola app to Restore Connectivity - did not work, I still have the problem.
                        Carefully cleaned the SIM card surface making sure there is no static electricity  discharge - did not work, I still have the problem.
                        Factory reset numerous times  - did not work, I still have the problem.
                        Removed and reinserted the SIM card - did not work, I still have the problem.
                        Updated to ICS hoping that would solve the problem - did not work, I still have the problem.
                        Anything I do I still have the problem.
    So please tell me, Does VZ publicly acknowledges there is a problem with DROID RAZR? If yes why do some people inside VZ deny any issues with it while others don't. Aren't they trained or aren't they reading the same training material the others do? Besides that I am not aware of Motorola or VZ taking any responsibility in trying to fix this.Is there a fix in the works? Please if there is any help for people like me, with the same problem, I think VZ should email owners with solutions. REAL SOLUTIONS because it is possible. I receive newsletters for new phones and plans but none to suggest a fix to issues.
    And factory reset after factory reset is not working out for me as I use my phone not to txt my friends or send funny pictures of my dog to my neighbor but for business. This is really affecting and annoying me. And yes, I could switch to an iPhone but Android provides me with a great deal of options in my line of work that iPhone does not have. And yes, I could switch to another Android based phone, but I paid for this one and I want to use what I paid money for.
    Again... final question is: Is there a fix, a software fix (I think this has to do with software) for this?
    Thank you!

    I had EXACTLY ALL of the same issues (plus some Bluetooth issues):
    Got my phone in January or February
    First instance of this happened about the middle of June (or maybe the third week) for several days before I finally called, believing it was a "hiccup" in the network (still on GB)
    Customer Service did some troubleshooting, placed it in "safe mode" to see if it might be an app causing it, factory reset, etc., etc., etc.......
    VZ put in a network trouble ticket which seemed to solve the issue (although I don't really know what may have been done) for about a week (now I know that this was a mere coincidence)
    About a week or two later (still on GB) it started again; this was maybe a Wednesday
    CS troubleshooting, another trouble ticket, etc., etc., and then I finally did a factory reset myself
    Friday night (maybe Saturday) ICS is out, and downloaded believing it would fix it.
    The problem was resolved briefly (several hours, maybe a full day) and then began again with a vengance
    Called, went through all the same humbug, did a couple (or a few) factory resets, and I too, had the "invalid SIM" error show up on the screen out of nowhere ........
    Customer Service had me to go to my local Verizon store and get a new SIM (they thought that might possibly be the problem). Got the replacement, and it worked, again, only briefly; just a few short hours later, it was right back to the same old thing........more phone calls
    trouble ticket is still out.......
    Was even told by the advance tech support person that on several phones with this very same problem, that he actually saw this resolved by simply creating a different, brand new Google account (instead of the Verizon customer's original Google account) during setup, after a factory reset (don't ask me how......). Gladly, this is one step that I didn't take (that's all I need is one more email account!)
    Finally, it was determined that it MUST be the device. I really didn't want another phone as I always keep my phones in pristine condition cosmetically, and there was no reason (as far as I was concerned) to swap it.
    Reluctantly, I allowed them to send me a replacement. I say, "reluctantly" because my original was a new device but they would be sending me out a "certified reconditioned, like-new" replacement.
    After some trepidation, I decided to go ahead; Motorola would probably take a year to get mine back to me after finding "nothing wrong", or the same year getting me a replacement, should I be lucky enough that my original device would act up for them to see that there actually is a real problem. Verizon, on the other hand could have a replacement to me in two days.
    Needless to say, it has been a week (5 days) with the replacement and I have to admit that it absolutely WAS the device that I bought originally. This replacement hasn't repeated the problem, (with the exception of ONE VERY MINOR instance of about a 5 - 15 minute window on one day only), and I'm happy to say that it works like my original device did when I first got it.
    I got a call after the 3rd or 4th day (I believe it was the 4th day) with the replacement device, from the trouble ticket people (technician who actually works out in the field maybe?) and was told that they have thoroughly checked the network/antenna/tower here and found that there was absolutely nothing wrong, and that everything is functioning as it should.
    This problem was continuously happening at my house, so it was natural that I believed something was wrong with the tower here near my house. I live in a good 3G/LTE coverage area near New Orleans and had no problems whatsoever from January/February through the first part of June, so it was only natural that I thought it must be a problem with the tower.
    I thanked him, and told him about the replacement, and he told me that's what he was going to suggest next, and it was the only suggestion that he had left.
    Just know that in the course of all of these calls, I was told by at least a few reps (2 for sure) at Verizon that they were aware that this IS a problem on some of the Razr's and Razr Maxx's.
    If this is as bad for you as it was for me (and I'm confident that it is), then I would call Customer Service - don't go to a store. Tell them EVERYTHING that has happened, everything that you've done to attempt to resolve it (including the painful process of factory resets), and what I've described here.
    If you're okay with a "new" (read: replacement) device, then I'm sure that they can get you a replacement out in short order. As far as it looking new, you would NEVER be able to tell cosmetically that this isn't a brand new device.
    I hope that this was able to help you, as well as all the others, with this issue.
    Good luck everyone, and God bless you.
    Message was edited by: Colin Pipkins
    Okay, so regrettably, I must report to everyone that the replacement followed suit after only 6-7 days. It lost 4G connectivity and jumped to 3G and that's where it stayed. 
    So I call Verizon and after a brief conversation, they asked if it was okay for them to transfer me over to Motorola for them to troubleshoot and I said that I'd be more than glad to speak with them.
    Here's the breakdown:
    After a lengthy call (an hour and twenty minutes), allowing them to remotely connect to my phone, and the Level 2 Tech seeing for himself that it's on 3G in a full 4G area, he tells me that there's nothing more that can be done.
    WHAAAT?!!!
    He said that if I want to send it in to Motorola they'll look at it, and if they did find anything wrong with the phone they'll send me a replacement, but if they DON'T find anything wrong with it (which I'm sure would be the case), they will simply send me my phone back, and that it will be Verizon's network that is the problem.
    In this scenario I would need to find a replacement phone to use while my Razr goes to Motorola (for them to find nothing wrong with of course, and blame everything on Verizon's LTE network) only to get it back weeks later and be totally inconvenienced (this has been going on since June).
    The last thing he said to me before getting off the phone was that they have similar devices with other carriers and they don't have any of these problems with those devices.
    I've started searching the other devices forums here in the Verizon Wireless Community and I'm beginning to see a pattern.  The same issue is happening with quite a few of the other 4G devices so I'm not really sure that another device (different manufacturer) is even the answer.
    They have sent me yet another Droid Razr and I can honestly say that this will be the last one. If I can't find a device that will actually keep/hold LTE connectivity then I may have to go back to Sprint.  Their native coverage is nowhere near Verizon's but they also don't have much 4G coverage right now.
    If I'm going to have to be on 3G anyway, I may as well pay less than I'm paying now - or at least pay the same and not have to worry about going over on data.I guess we'll see how this replacement works out and go from there.
    Anyhow, just know that it may not be a Razr/Razr Maxx problem after all.
    Hopefully, they can get this sorted out and we can all get back to life......  

  • ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide

    iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

    Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device?  If so, keep in mind that Apple's servers may be experiencing a heavy load right now.  They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • Verify that SQL Server Reporting Services is installed properly and that it is running.

    I am trying to install DPM 2010 on Windows 2008 R2.  Running through installation and the server that I'm installing DPM to will also host the SQL instance and Reporting instance.  Pretty much choosing all the defaults.
    Installation gets to reporting portion and fails.  It says that I need to verify that Reporting Services is running.   The exact error is:
    Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation. 
    For details, click the Error tab.
    DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
    Report configuration failed.
    Verify that SQL Server Reporting Services is installed properly and that it is running.
    ID: 812
    It is running and working, I can go to the URL and see Reports installed.   It grabbed a server certificate which is valid and binds that to 443.  I have tried this as well with the certificate removed.
    Here is the relative portion of the DPM 2010 log:
    [6/25/2010 10:30:01 AM] * Exception :  => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException: Exception of
    type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
    *** Mojito error was: PasswordTooShort; 0; None
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
    [6/25/2010 10:30:01 AM] * Exception :  => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
    Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
    Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
       at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
    *** Mojito error was: PasswordTooShort; 0; None
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
    *** Mojito error was: ReportDeploymentFailed; 0; None
       --- End of inner exception stack trace ---
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.ConfigureReporting(Boolean isRemoteDb)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
    *** Mojito error was: ReportDeploymentFailed; 0; None
    [6/25/2010 10:30:07 AM] *** Error : Report configuration failed.
    Verify that SQL Server Reporting Services is installed properly and that it is running.
    ID: 812
    [6/25/2010 10:30:07 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
    copied during installation.
    For details, click the Error tab.
    DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)

    Hello,
    The real problem is the error UnableToConfigureAccount and *** Mojito error was: PasswordTooShort; 0; None
    The reason is due to the new password complexity on Windows 2008 which states the following:
    Password must meet complexity requirements
    This security setting determines whether passwords must meet complexity requirements.
    If this policy is enabled, passwords must meet the following minimum requirements:
    Not contain the user's account name or parts of the user's full name that exceed two consecutive characters
    Be at least six characters in length Contain characters from three of the following four categories:
    English uppercase characters (A through Z)
    English lowercase characters (a through z)
    Base 10 digits (0 through 9)
    Non-alphabetic characters (for example, !, $, #, %)
    Complexity requirements are enforced when passwords are changed or created.
    Default:
    Enabled on domain controllers.
    Disabled on stand-alone servers.
    Note: By default, member computers follow the configuration of their domain controllers.
    Please use a more secure password adhering to the above criteria and DPM should install fine.
    Regards, Mike J [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

  • The server at Mac OS X Server Web Services requires a username and password

    I am running SL Server 10.6.2, wiki works but when a person clicks an attached file in a wiki and then selects "open" they get a login popup with the notification The server at Mac OS X Server Web Services requires a username and password. It doesn't matter what they put into the login/pass it comes back. If they hit cancel then the document opens. If they click save then it saves with no issue. I can type in the admin login/pass of the server and it works. Does this mean the security settings to the location of the files is wrong? Any help is greatly appreciated!

    By the way they are using Internet Explorer 7 when opening these documents.

  • How to stop the services provided by net80 and oracle9i

    how to stop the services provided by net80 and oracle9i during the installation of forms6i & reports6i in windows 2003 server

    Go into the control panel and choose services ... stop the services.

Maybe you are looking for

  • Access to memory slots on b320

    I want to upgrade my ram on my b320 but have hit a brick wall trying to get the back off. I've looked on YouTube where a vid shows it just being slid off but mine won't budge. I don't want to force it or prise it off in case I do damage. Is there a k

  • Can you crop an image in Flex?

    Hi.  I am writing a small Air application in Flex where a bunch of images will be imported at a resolution of 120x80 pixels.  To use them in the application, I need them to be square at 80x80 pixels.  Right now they are squished because I am forcing

  • HT1692 My Contacts synced once to my iPod, how do I get them to sync again with updates?

    My Outlook Contacts synced to my iPod once (after finally finding out how to so that). Since then it has never synced with Contacts again. It syncs the music just fine. Some instructions I have read mention an "Info Tab" after selecting the device. I

  • [SOLVED]HAL and multiple mount attempts

    Recently I managed to break my HD and so had to reinstall everything. Everything is working about the way they used to BUT: Everytime I put CD or DVD into my DVD-drive or try to use USB-stick HAL for some reason tries to mount the media 3 times. Disc

  • Set types

    Hi All, Please let me know the use of set types.I had created one set type with two attributes i had followed the below process Create set type using the TCode COMM_ATTRSET, create two attributes with range of values. Using the tcode CRMM_UIU_PROD_GE